1 commit 85eb5caf6b906f7ec5b54814e8c7c74f55986bb7
2 Author: Wolfgang Denk <wd@denx.de>
3 Date: Tue Aug 14 09:47:27 2007 +0200
5 Coding style cleanup; rebuild CHANGELOG
7 commit 7f3f2bd2dc08e0b05e185662ca2e2d283757104a
8 Author: Randy Vinson <rvinson@linuxbox.(none)>
9 Date: Tue Feb 27 19:42:22 2007 -0700
11 85xxCDS: Add make targets for legacy systems.
13 The PCI ID select values on the Arcadia main board differ depending
14 on the version of the hardware. The standard configuration supports
15 Rev 3.1. The legacy target supports Rev 2.x.
17 Signed-off-by Randy Vinson <rvinson@mvista.com>
19 commit e41094c7e38177c755fbd9b182018069614f080d
20 Author: Andy Fleming <afleming@freescale.com>
21 Date: Tue Aug 14 01:50:09 2007 -0500
23 85xxCDS: Enable the VIA PCI-to-ISA bridge.
25 Author: Randy Vinson <rvinson@linuxbox.(none)>
27 Enable the PCI-to-ISA bridge in the VIA Southbridge located on the
30 Signed-off-by: Randy Vinson <rvinson@mvista.com>
31 Signed-off-by: York Sun <yorksun@freescale.com>
33 commit da9d4610d76e52c4d20a8f3d8433439a7fcf5b71
34 Author: Andy Fleming <afleming@freescale.com>
35 Date: Tue Aug 14 00:14:25 2007 -0500
37 Add support for UEC to 8568
39 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
40 Signed-off-by: Andy Fleming <afleming@freescale.com>
42 commit c59e4091ffe0148398b9e9ff14a019ea038b7432
43 Author: Haiying Wang <Haiying.Wang@freescale.com>
44 Date: Tue Jun 19 14:18:34 2007 -0400
46 Add PCI support for MPC8568MDS board
48 This patch is against u-boot-mpc85xx.git of www.denx.com
50 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
51 Signed-off-by: Ebony Zhu <ebony.zhu@freescale.com>
53 commit d111d6382c99fdea08c2312eeeae8786945e189a
54 Author: Haiying Wang <Haiying.Wang@freescale.com>
55 Date: Tue Jun 19 14:18:32 2007 -0400
57 Empirically set cpo and clk_adjust for mpc85xx DDR2 support
59 This patch is against u-boot-mpc85xx.git of www.denx.com
61 Setting cpo to 0x9 for frequencies higher than 333MHz is verified on
62 both MPC8548CDS board and MPC8568MDS board, especially for supporting
65 Setting clk_adjust to 0x6(3/4 late cycle) for MPC8568MDS board is for
66 DDR2 on all current board versions especially ver 1.92 or later to bring
69 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
71 commit 3db0bef59eab1155801618cef5c481e97553b597
72 Author: Kumar Gala <galak@kernel.crashing.org>
73 Date: Tue Aug 7 18:07:27 2007 -0500
75 Use an absolute address when jumping out of 4k boot page
77 On e500 when we leave the 4k boot page we should use an absolute address since
78 we don't know where the board code may want us to be really running at.
80 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
82 commit 39980c610c9a4c381907c9e1d1b9c0e1c0dca57a
83 Author: Andy Fleming <afleming@freescale.com>
84 Date: Mon Aug 13 14:49:59 2007 -0500
86 MPC85xx BA bits not set for 3-bit bank address DIMM
88 The current implementation does not set the number of bank address bits
89 (BA) in the processor. The default assumes 2 logical bank bits. This
90 works fine for a DIMM that uses devices with 4 internal banks (SPD
91 byte17 = 0x4) but needs to be set appropriately for a DIMM that uses
92 devices with 8 internal banks (SPD byte17 = 0x8).
94 Signed-off-by: Greg Davis <DavisG@embeddedplanet.com>
96 commit 6c543597bb4b1ecf5d8589f7abb0f39929fb7fd1
97 Author: Andy Fleming <afleming@freescale.com>
98 Date: Mon Aug 13 14:38:06 2007 -0500
100 Fix minor 85xx warnings
102 Some patches had inserted warnings into the build:
103 * mpc8560ads declared data without using it
104 * cpu_init declared ecm and immap without using it in all CONFIGs
105 * MPC8548CDS.h had its default filenames changed so that they contained
106 "\m" in the paths. Made the defaults not Windows-specific (or
109 Signed-off-by: Andy Fleming <afleming@freescale.com>
111 commit f2cff6b104f82b993bef6086ce0c97159bbe1add
112 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
113 Date: Fri Jul 27 01:50:52 2007 -0500
115 8548cds PCIE support.
117 Make the early L1 cache stack region guarded to prevent speculative
118 fetches outside the locked range.
120 Use _PHYS defines, not _MEM for cpu-side PCI memory mapped regions.
121 init.S whitespace cleanup.
123 Allow TEXT_BASE value to be specified on command line. This allows it
124 to be set to 0xfffc0000 which cuts the uboot binary in half.
126 Clear and enable lbc and ecm errors.
128 Update last_busno in device-tree for pci and pcie.
130 Remove load of obsolete cpu/mpc85xx/pci.0
132 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
133 Acked-by: Andy Fleming <afleming@freescale.com>
135 commit 837f1ba05cfb248aba5ab8e1fb1bfeefa07d5962
136 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
137 Date: Fri Jul 27 01:50:51 2007 -0500
141 PCI1 LAW mapping should use CFG_PCI1_MEM_PHY and not _BASE address.
143 Enable LBC and ECM errors and clear error registers.
145 Add tftpflash env var to get uboot from tftp server and flash it.
147 Add pci/pcie convenience env vars to display register space:
148 "run pcie3regs" to see all pcie3 ccsr registers
149 "run pcie3cfg" to see all cfg registers
150 Whitespace cleanup and MPC8544DS.h
152 Enable CONFIG_INTERRUPTS.
154 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
155 Acked-by: Andy Fleming <afleming@freescale.com>
157 commit 61a21e980a7b9188424d04f1c265fdc5c21c7e85
158 Author: Andy Fleming <afleming@freescale.com>
159 Date: Tue Aug 14 01:34:21 2007 -0500
161 85xx start.S cleanup and exception support
163 From: Ed Swarthout <Ed.Swarthout@freescale.com>
165 Support external interrupts from platform to eliminate system hangs.
166 Define CONFIG_INTERRUPTS board configure option to enable.
167 Enable ecm, ddr, lbc, and pci/pcie error interrupts in PIC.
169 Remove extra cpu initialization redundant with hardware initialization.
172 Define and use _START_OFFSET consistent with other processors using
175 Move additional code from .text to boot page to make room for
176 exception vectors at start of image.
178 Handle Machine Check, External and Critical exceptions.
180 Fix e500 machine check error determination in traps.c
182 TEXT_BASE can now be 0xfffc_0000 - which cuts binary image in half.
184 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
185 Acked-by: Andy Fleming <afleming@freescale.com>
187 commit 7bd30fc4a6475b41d6679ae3aafc9fa505260c47
188 Author: Andy Fleming <afleming@freescale.com>
189 Date: Tue Aug 14 01:33:18 2007 -0500
193 Signed-off-by: Andy Fleming <afleming@freescale.com>
195 commit 40c7f9b0de4e300370adfc704128fa0f79a143b6
196 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
197 Date: Fri Jul 27 01:50:48 2007 -0500
199 85xx allow debugger to configure ddr.
201 Only check for mpc8548 rev 1 when compiled for 8548.
203 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
204 Acked-by: Andy Fleming <afleming@freescale.com>
206 commit 29372ff38c5baab7d0e3a8c14fe11fa194a38704
207 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
208 Date: Fri Jul 27 01:50:47 2007 -0500
210 mpc85xx L2 cache reporting and SRAM relocation option.
212 Allow debugger to override flash cs0/cs1 settings to enable alternate
215 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
216 Acked-by: Andy Fleming <afleming@freescale.com>
218 commit 41f0f8fb1ab92f0cba7d329de90070f822f8299f
219 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
220 Date: Fri Jul 27 01:50:46 2007 -0500
222 e500 needs ppc_asm.tmp MCK_EXCEPTION
224 Always define MCK_EXCEPTION macro - so e500 can use it too.
226 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
227 Acked-by: Andy Fleming <afleming@freescale.com>
229 commit 53a5c424bf8655b7b4e2c305a441963259a26a81
230 Author: David Updegraff <dave@cray.com>
231 Date: Mon Jun 11 10:41:07 2007 -0500
233 multicast tftp: RFC2090
235 Implemented IETF RFC2090, Multicast TFTP. Initial implementation
236 on Realtek RTL8139 and Freescale TSEC.
238 Signed-off-by: David Updegraff <dave@cray.com>
239 Signed-off-by: Ben Warren <bwarren@qstreams.com>
241 commit 5d110f0aa69f065ee386ec1840dfee1e8cc46bc1
242 Author: Wilson Callan <wcallan@savantav.com>
243 Date: Sat Jul 28 10:56:13 2007 -0400
245 New CONFIG_BOOTP_SERVERIP option
247 Added CONFIG_BOOTP_SERVERIP to allow the tftp server to be different
248 from the bootp server
250 Signed-off-by: Wilson Callan <wcallan@savantav.com>
251 Signed-off-by: Ben Warren <bwarren@qstreams.com>
253 commit 50cca8b976ec74069860208c36e64ce8f4d5e4c1
254 Author: Mike Rapoport <mike@compulab.co.il>
255 Date: Sun Aug 12 08:48:27 2007 +0300
257 Add ability to take MAC address from the environment to DM9000 driver
259 Signed-off-by: Mike Rapoport <mike@compulab.co.il>
260 Signed-off-by: Ben Warren <bwarren@qstreams.com>
262 commit be5d72d10d47609326226225181e301fb9a33b58
263 Author: Wolfgang Denk <wd@denx.de>
264 Date: Mon Aug 13 21:57:53 2007 +0200
266 Minor coding style cleanup. Update CHANGELOG.
268 Signed-off-by: Wolfgang Denk <wd@denx.de>
270 commit cca34967cbd13ff6bd352be29e3f1cc88ab24c05
271 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
272 Date: Sat Aug 11 06:54:58 2007 -0500
274 Modify SBC8641D to use new Freescale PCI routines
276 PCI-Express sockets 1 and 2 verified working with Intel Pro/1000 PT
279 Signed-off-by: Joe Hamman <joe.hamman@embeddedspecialties.com>
280 Signde-off-by: Jon Loeliger <jdl@freescale.com>
282 commit a08458303e7f9db67f296980036d3292c35cb45c
283 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
284 Date: Fri Jun 29 18:38:51 2007 +0200
286 atmel_mci: Fix data timeout value
288 Calculate the data timeout based on values from the CSD instead of
289 just using a hardcoded DTOR value. This is a backport of a similar fix
290 in BSP 2.0, with one additional fix: the DTOCYC value is rounded up
293 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
295 commit 0ba8eed28b575626b17e0a7882f923b83e0d7584
296 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
297 Date: Mon Aug 13 17:22:31 2007 +0200
299 AVR32: Include <div64.h> instead of <asm/div64.h>
301 include/asm-avr32/div64.h was recently moved to include/div64.h, but
302 cpu/at32ap/interrupts.c wasn't properly updated (an earlier version of
303 the patch was merged perhaps?)
305 This patch updates cpu/at32ap/interrupts.c so that the avr32 port
308 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
310 commit f0d1246ed7cb5a88522244c596d7ae7e6f161283
311 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
312 Date: Wed Jun 27 13:34:26 2007 +0200
314 atmel_mci: Use 512 byte blocksize if possible
316 Instead of always using the largest blocksize the card supports, check
317 if it can support smaller block sizes and use 512 bytes if possible.
318 Most cards do support this, and other parts of u-boot seem to have
319 trouble with block sizes different from 512 bytes.
321 Also enable underrun/overrun protection.
323 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
324 Acked-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
326 commit 9986bc3e40e899bea372a99a2bca4071bdf2e24b
327 Author: Wolfgang Denk <wd@denx.de>
328 Date: Sun Aug 12 21:34:50 2007 +0200
332 commit 77d19a8bf3b0b1e401cb9f23c81e2ef419705c1a
333 Author: Wolfgang Denk <wd@denx.de>
334 Date: Sun Aug 12 21:34:34 2007 +0200
336 Minor alignment of output, 2nd try.
337 Also update CHANGELOG
339 Signed-off-by: Wolfgang Denk <wd@denx.de>
341 commit 6b309f22a724fad8418e811751a0741b893419cf
342 Author: Wolfgang Denk <wd@denx.de>
343 Date: Sun Aug 12 20:35:49 2007 +0200
345 Minor alignment of output
347 Signed-off-by: Wolfgang Denk <wd@denx.de>
349 commit 6f6d7b9c8559e241e8d232621542b8b59699b07b
350 Author: Wolfgang Denk <wd@denx.de>
351 Date: Sun Aug 12 18:28:18 2007 +0200
353 Cleanup output on ADS5121 board
355 Signed-off-by: Wolfgang Denk
357 commit a4d2636f2a859245ed3a401f26189da2dfda4ceb
358 Author: Wolfgang Denk <wd@denx.de>
359 Date: Sun Aug 12 15:11:38 2007 +0200
361 Adapt board configuration and fix kernel crash on MCC200 board.
363 The update procedure was modified to turn off the USB subsystem
364 before exit for MCC200 and TRAB. This is necessary as otherwise the
365 USB controller continues to write periodically to system memory!
367 MCC200-specific notes:
368 - the patch disables the magic key check for MCC200
369 - the patch contains the configuration changes made
370 for the new revision of the board.
372 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
373 Signed-off-by: Wolfgang Denk <wd@denx.de>
375 commit e27f3a6efb9db5a533223b05c629ff4ac8d921bf
376 Author: Wolfgang Denk <wd@denx.de>
377 Date: Sun Aug 12 14:47:54 2007 +0200
379 Adjust default configuration of ADS5121 board.
381 Signed-off-by: Wolfgang Denk <wd@denx.de>
383 commit afaac86fe2948ac84cd9a12bbed883b3c683e7d9
384 Author: Wolfgang Denk <wd@denx.de>
385 Date: Sun Aug 12 14:27:39 2007 +0200
387 Clean up some remaining CFG_CMD_ -> CONFIG_CMD_ issues.
389 Signed-off-by: Wolfgang Denk <wd@denx.de>
391 commit 5fe6be6208dda852c3564e384bd78d75784dea3e
392 Author: Gerald Van Baren <vanbaren@cideas.com>
393 Date: Tue Aug 7 21:14:22 2007 -0400
395 Improve error print messages.
397 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
399 commit 99dffca3b7590a16a00bc475c860b67b2a3f1462
400 Author: Kim Phillips <kim.phillips@freescale.com>
401 Date: Tue Jul 17 13:57:04 2007 -0500
403 fdt: allow for builds that don't want env and bd_t nodes
405 protect fdt_env and fdt_bd_t invocations, fix codingstyle while in the
408 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
410 commit 91148bf7aeba142d6f348805db7625db7da64d6f
411 Author: Kim Phillips <kim.phillips@freescale.com>
412 Date: Tue Jul 17 13:56:53 2007 -0500
414 fdt: do board setup based on fdt address specified on bootm line
416 The last fdt patch to bootm did board setup based on the address
417 specified by a prior fdt address command invocation. The bootm
418 code, as its call to fdt_chosen does, should use the fdt specified
419 by the user on the bootm command. Note this restores full
420 functionality for the 8360's existing default boot environment
421 values, e.g. 'run nfsboot' (i.e. no having to 'fdt addr $fdtaddr'
422 before booting a kernel).
424 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
426 commit e125a2ffc209dd34794e326c7175658253beadf3
427 Author: Gerald Van Baren <vanbaren@cideas.com>
428 Date: Tue Jul 10 20:40:39 2007 -0400
430 Call ft_board_setup() from the bootm command.
432 In the patch titled "Create new fdt boardsetup command..." I removed the
433 call to ft_board_setup() from the routine fdt_chosen(), but I forgot
434 to add a direct call back into cmd_bootm.c
436 This fixes the oversight by adding the direct call to the bootm command.
438 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
440 commit fd61e55dd8cb52ce3ff91b3917af26e24b6b0845
441 Author: Gerald Van Baren <vanbaren@cideas.com>
442 Date: Mon Jun 25 23:25:28 2007 -0400
444 Create new fdt boardsetup command, fix bug parsing [] form of set values.
446 Previously ft_board_setup() was called by fdt_chosen() which was not
447 really correctly structured. This splits ft_board_setup() out by creating
448 a new fdt boardsetup command.
450 Fix a bug when parsing fdt set command values which have the square
451 bracket form [00 11 22 33] - the length was updated incorrectly in when
454 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
456 commit 6f35ded9e85493595e0eb66a82b502a95326d049
457 Author: Gerald Van Baren <vanbaren@cideas.com>
458 Date: Mon Jun 25 20:55:58 2007 -0400
460 Tighten up the error messages.
462 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
464 commit c45874b05aae897a6c29d1a97d4bb708fca2756c
465 Author: Gerald Van Baren <vanbaren@cideas.com>
466 Date: Mon Jun 25 19:52:23 2007 -0400
468 Asthetic improvements: error messages and line lengths.
470 Tighten up the error messages, split overlength lines.
472 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
474 commit 35ec398f16e17df600edc1b38c1e9e62c15c9aa1
475 Author: Gerald Van Baren <vanbaren@cideas.com>
476 Date: Fri May 25 22:08:57 2007 -0400
478 Fix fdt_chosen() to call ft_board_setup(), clean up long lines.
480 The fdt_chosen() function was adding/seting some properties ad-hoc
481 improperly and duplicated (poorly) what was done in ft_board_setup()
483 Clean up long lines (setting properties, printing errors).
485 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
487 commit 06e19a07701c968f15d72c083b5872a1a11c7b01
488 Author: Gerald Van Baren <vanbaren@cideas.com>
489 Date: Mon May 21 23:27:16 2007 -0400
491 For fdt_find_node_by_path(), handle the root path properly.
493 Also removes the special case root path detection in cmd_fdt.c since it
494 is no longer necessary.
496 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
498 commit 9675ee7208ab965d13ea8d8262d77ac4160ef549
499 Author: Gerald Van Baren <vanbaren@cideas.com>
500 Date: Thu May 17 23:54:36 2007 -0400
502 Add fdt_find_node_by_type() and fdt_find_compatible_node() to LIBFDT
504 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
505 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
507 commit 1a861169bc3758f9de3aead62b058736c6891246
508 Author: Gerald Van Baren <vanbaren@cideas.com>
509 Date: Wed Jun 6 22:47:58 2007 -0400
511 Replace fdt_node_offset() with fdt_find_node_by_path().
513 The new name matches more closely the kernel's name, which is also
514 a much better description.
516 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
517 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
519 commit addd8ce83078c25f0eca5f23adbdfc64ca50a243
520 Author: Gerald Van Baren <vanbaren@cideas.com>
521 Date: Wed May 16 22:39:59 2007 -0400
523 Fix cmd_fdt line lengths, refactor code.
525 Break lines that were greater than 80 characters in length.
526 Move the fdt print and property parsing code to separate static functions
527 to reduce coding clutter in the fdt_cmd handling body.
529 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
531 commit 25114033ab21788810c48ba4df103b649da1223b
532 Author: Gerald Van Baren <vanbaren@cideas.com>
533 Date: Sat May 12 09:47:25 2007 -0400
535 FDT command improvements.
537 Fix "fdt set" so that it will create a non-existing property.
538 Add "fdt mknode" to create nodes.
540 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
542 commit 38eb508e8e811e2e57628f445de3a24a23c7d804
543 Author: Gerald Van Baren <vanbaren@cideas.com>
544 Date: Sat May 12 09:45:46 2007 -0400
546 Reorganize and fix problems (returns) in the bootm command.
548 Do *NOT* return after the "point of no return" has been passed.
549 If something goes wrong, the board must be reset after that point.
550 Move the "Transferring control to Linux" debug message back to where it
551 belongs: just before transferring control to linux.
553 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
555 commit 89c8757d8f213c47709bdc4efe0695263a6080a6
556 Author: Gerald Van Baren <vanbaren@cideas.com>
557 Date: Tue May 8 21:27:35 2007 -0400
559 Fix bugs in the CONFIG_OF_LIBFDT
561 Stupid coding mistakes (identified by Timur Tabi, thanks).
563 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
565 commit 6be07cc1ca458278c85ecdbf1a0536cff4c701ec
566 Author: Gerald Van Baren <vanbaren@cideas.com>
567 Date: Wed Apr 25 22:47:15 2007 -0400
569 Improve fdt move length handling.
571 Make the length parameter optional: if not specified, do the move using
572 the current size unchanged.
574 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
576 commit bb930e76fea6cf89ca2d98e2f7c7a6043d79327d
577 Author: Gerald Van Baren <vanbaren@cideas.com>
578 Date: Wed Apr 25 22:23:36 2007 -0400
582 Declare the variable fdt properly as extern.
583 Call the "set_fn" function pointer the "short way" without the full
584 dereferencing syntax.
586 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
588 commit ba24e2ac3bdb5c489f3c787e7542b6474c4d65c6
589 Author: Gerald Van Baren <vanbaren@cideas.com>
590 Date: Wed Apr 25 21:24:27 2007 -0400
592 Improve error messages, more informative.
594 Print more than the raw libfdt error message strings. This is especially
595 useful for cluing in the user when the bootm command aborts due to
598 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
600 commit 8096b3b8f772c1894ddeda9dbceff6a8826473a4
601 Author: Gerald Van Baren <vanbaren@cideas.com>
602 Date: Fri Apr 20 22:46:53 2007 -0400
604 libfdt: Conditionally compile based on CONFIG_OF_LIBFDT
606 This is the way u-boot reduces configured-out code. At Wolfgang
607 Grandegger and Wolfgang Denk's request, make libfdt conform.
609 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
611 commit 923efd286411ed052d9e074f59f8986d6081061c
612 Author: Bruce Adler <bruce.adler@ccpu.com>
613 Date: Fri Aug 10 14:54:47 2007 -0700
615 add image size and descriptors for Spartan 3E FPGA chips
617 Spartan 3E image sizes taken from Table 1-4 in Xilinx UG332 (v1.1)
619 Signed-off by: Bruce Adler <bruce.adler@ccpu.com>
621 commit fb56579ffe7ef3275b7036bb7b924e5a0d32bd70
622 Author: Kim Phillips <kim.phillips@freescale.com>
623 Date: Fri Aug 10 15:34:48 2007 -0500
625 make MAKEALL more immune to merge conflicts
627 ..by placing board entries one per line, as suggested by jdl.
629 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
631 commit 2628114ec564f969f34b5f7105fbd168cb8c9c3f
632 Author: Kim Phillips <kim.phillips@freescale.com>
633 Date: Fri Aug 10 13:28:25 2007 -0500
635 README: Remove outdated cpu type, board type, and NAME_config lists
637 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
639 commit 49bb59912d21aacb507eb81fd21fb7af650c706c
640 Author: Dave Liu <r63238@freescale.com>
641 Date: Fri Aug 10 15:48:59 2007 +0800
643 mpc83xx: Suppress the warning 'burstlen'
645 suppress the warning 'burstlen' of spd_sdram.
647 Signed-off-by: Dave Liu <daveliu@freescale.com>
649 commit c646bba6465a45c60746d4cc1602cd06c1960f2d
650 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
651 Date: Thu Aug 9 15:11:03 2007 -0500
653 Add support for SBC8641D. Config files.
655 Add support for Wind River's SBC8641D reference board.
657 Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
658 Acked-by: Wolfgang Denk <wd@denx.de>
659 Acked-by: Jon Loeliger <jdl@freescale.com>
661 commit 8ac273271d57321f90505c7a51cdb1ef2113b628
662 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
663 Date: Thu Aug 9 15:10:53 2007 -0500
665 Add support for SBC8641D. Board files.
667 Add support for Wind River's SBC8641D reference board.
669 Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
670 Acked-by: Wolfgang Denk <wd@denx.de>
671 Acked-by: Jon Loeliger <jdl@freescale.com>
673 commit c2c0ab4aff86622b837a48a0e560351f9afafb95
674 Author: Stefan Roese <sr@denx.de>
675 Date: Fri Aug 10 20:34:58 2007 +0200
677 Conding style cleanup
679 Signed-off-by: Stefan Roese <sr@denx.de>
681 commit c74b2108e31fe09bd1c5d291c3cf360510d4f13e
682 Author: Sergey Kubushyn <ksi@koi8.net>
683 Date: Fri Aug 10 20:26:18 2007 +0200
685 [ARM] TI DaVinci support, hopefully final
687 Add support for the following DaVinci boards:
694 - Split into separate board directories
695 - Removed changes to MTD_DEBUG (or whatever it's called)
696 - New CONFIG_CMD party line followed
697 - Some cosmetic fixes, cleanup etc.
698 - Patches against the latest U-Boot tree as of now.
699 - Fixed CONFIG_CMD_NET in net files.
700 - Fixed CONFIG_CMD_EEPROM for schmoogie.
701 - Made sure it compiles and works (forceenv() link problem) on SCHMOOGIE and
702 DV_EVM. Can't check if it works on SONATA, don't have a board any more,
703 but it at least compiles.
705 Here is an excerpt from session log on SCHMOOGIE...
707 U-Boot 1.2.0-g6c33c785-dirty (Aug 7 2007 - 13:07:17)
716 ETH PHY : DP83848 @ 0x01
718 Valid chip addresses: 1B 38 3A 3D 3F 50 5D 6F
719 U-Boot > ping 192.168.253.10
720 host 192.168.253.10 is alive
723 Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
724 Acked-by: Dirk Behme <dirk.behme@gmail.com>
725 Acked-by: Zach Sadecki <Zach.Sadecki@ripcode.com>
726 Acked-by: Stefan Roese <sr@denx.de>
728 commit 2e4d94f1e3c2961428967a33b6ff2520568391b3
729 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
730 Date: Fri Jul 27 01:50:45 2007 -0500
732 fsl_pci_init cleanup.
734 Do not enable normal errors created during probe (master abort, perr,
735 and pcie Invalid Configuration access).
737 Add CONFIG_PCI_NOSCAN board option to prevent bus scan.
739 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
740 Acked-by: Andy Fleming <afleming@freescale.com>
742 commit 936b3e69b667c3eb9a61ece4e78647d3fce9fc2a
743 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
744 Date: Fri Jul 27 01:50:44 2007 -0500
746 pciauto_setup_device bars_num fix
748 Passing bars_num=0 to pciauto_setup_device should assign no bars.
750 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
751 Acked-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
752 Acked-by: Andy Fleming <afleming@freescale.com>
754 commit cf0b185e58ca0aec8ae2b2a8804ec0ef58ee21d4
755 Author: Jon Loeliger <jdl@freescale.com>
756 Date: Mon Aug 6 17:39:44 2007 -0500
758 8641hpcn: Do correct sized pointer math.
760 When I rebased Ed's patch and cleaned up a few compilation
761 problems, I apparently rebased my brain on crack first.
762 Fix that by doing (char *) sized pointer math as needed.
764 Signed-off-by: Jon Loeliger <jdl@freescale.com>
766 commit cfc7a7f5bb3273c9951173c788001d45118f141f
767 Author: Jon Loeliger <jdl@freescale.com>
768 Date: Thu Aug 2 14:42:20 2007 -0500
773 Always set PICGCR_MODE.
774 Enable machine check and provide board config option
775 to set and handle SoC error interrupts.
777 Include MSSSR0 in error message.
779 Isolate a RAMBOOT bit of code with #ifdef CFG_RAMBOOT.
781 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
782 Signed-off-by: Jon Loeliger <jdl@freescale.com>
784 commit 3a6d56c20989fe27360afe743bd2a7ad4d76e48f
785 Author: Dirk Behme <dirk.behme@googlemail.com>
786 Date: Thu Aug 2 17:42:08 2007 +0200
788 Make use of generic 64bit division in nand_util.c
790 Use generic 64bit division in nand_util.c. This makes nand_util.c
791 independent of any toolchain 64bit division.
793 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
795 commit f7c086e94e8ce9aad7268af97f73aa6884686f27
796 Author: Dirk Behme <dirk.behme@googlemail.com>
797 Date: Thu Aug 2 17:41:14 2007 +0200
799 Move 64bit division from avr32 to generic lib
801 Move the 64bit division from lib_avr32 to lib_generic. With this, all
802 boards can do_div/__div64_32 if needed, not only avr one. Code is put
803 to lib_generic, so no larger memory footprint if not used. No code
804 modifications. Thanks for proposal by HÃ¥vard Skinnemoen.
806 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
808 commit 99c2fdab91bc633e46fb41dbaa629f87ccf6e00f
809 Author: Kim Phillips <kim.phillips@freescale.com>
810 Date: Mon Aug 6 18:18:34 2007 -0500
812 mpc83xx: fix ITX[GP] O=builddir builds
814 make: *** No rule to make target `/work/wd/tmp/board/mpc8349itx/u-boot.lds', needed by `/work/wd/tmp/u-boot'. Stop.
816 Both the ITX and ITX-GP fail when you use "make O=<some dir> ..." or
817 "BUILD_DIR=<some dir> ./MAKEALL ..."
819 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
821 commit 47e8bc846759e037b8af0e5f9c9f9cfa7a1050c3
822 Author: Dave Liu <r63238@freescale.com>
823 Date: Wed Aug 1 15:00:59 2007 +0800
825 mpc83xx: Correct the README for DDR ECC
827 Update the README for DDR ECC, change the name
828 to README.mpc83xx.ddrecc.
830 Signed-off-by: Dave Liu <daveliu@freescale.com>
831 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
833 commit daab8c67d2defef73dc26ab07f0c3afd1b05d019
834 Author: Dave Liu <r63238@freescale.com>
835 Date: Wed Aug 1 15:00:15 2007 +0800
837 mpc83xx: Consolidate the ECC support of 83xx
839 Remove the duplicated source code of ecc command on the <board>.c,
840 for reused, move these code to cpu/mpc83xx directory.
842 Signed-off-by: Dave Liu <daveliu@freescale.com>
843 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
845 commit 036575c544cf1b69654d8fb334bda69c6ff3da36
846 Author: Dave Liu <r63238@freescale.com>
847 Date: Sat Aug 4 13:37:39 2007 +0800
849 mpc83xx: Correct the burst length for DDR2 with 32 bits
851 The burst length should be 4 for DDR2 with 32 bits bus
853 Signed-off-by: Dave Liu <daveliu@freescale.com>
855 commit 1c274c4e05b6dc9b24edc8aa618b02f607ee6eed
856 Author: Kim Phillips <kim.phillips@freescale.com>
857 Date: Wed Jul 25 19:25:33 2007 -0500
859 mpc83xx: add support for the MPC8323E RDB
861 MPC8323E based board with 64MB fixed SDRAM, 16MB flash,
862 five 10/100 ethernet ports connected via an ICPlus IP175C
863 switch, one PCI slot, and serial. Features not supported
864 in this patch are SD card interface, 2 USB ports, and the
867 Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
868 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
870 commit 343d91009d55fc5b3ff8cc940597af6c6aa1d359
871 Author: Kim Phillips <kim.phillips@freescale.com>
872 Date: Wed Jul 25 19:25:28 2007 -0500
874 mpc83xx: fixup generic pci for libfdt
876 add libfdt support to the generic 83xx pci code
878 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
880 commit f57ac7a7b37109245b69db80839ebee26179966a
881 Author: Kim Phillips <kim.phillips@freescale.com>
882 Date: Wed Jul 25 19:25:22 2007 -0500
884 mpc83xx: fix 8360 and cpu functions to update fdt being passed
886 ..and not the global fdt. Rename local fdt vars to blob so as not to
887 be confused with the global var with the same three-letter name.
889 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
891 commit 8be404459a6b7395415a57bb35e8377e3b2b5acb
892 Author: Jerry Van Baren <gvb.uboot@gmail.com>
893 Date: Wed Jul 4 21:34:24 2007 -0400
895 mpc83xx: Fix errors when CONFIG_OF_LIBFDT is enabled
897 Several node strings were not correct (trailing slashes and properties
899 Added setting of the timebase-frequency.
900 Improved error messages and use debug() instead of printf().
902 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
903 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
905 commit 26d02c9bbac1751c5e19294f000100b48d43a920
906 Author: Jerry Van Baren <gvb.uboot@gmail.com>
907 Date: Wed Jul 4 21:27:30 2007 -0400
909 mpc83xx: Replace fdt_node_offset() with fdt_find_node_by_path().
911 The new name matches more closely the kernel's name, which is also
912 a much better description.
914 These are the mpc83xx changes made necessary by the function name change.
916 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
917 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
918 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
920 commit 9be39a67c9f8fef7107f5df09d673005f04d0963
921 Author: Dave Liu <daveliu@freescale.com>
922 Date: Mon Jun 25 10:41:56 2007 +0800
924 mpc83xx: Add support for the display of reset status
926 83xx processor family has many reset sources, such as
927 power on reset, software hard reset, software soft reset,
928 JTAG, bus monitor, software watchdog, check stop reset,
929 external hard reset, external software reset.
930 sometimes, to figure out the fault of system, we need to
931 know the cause of reset early before the prompt of
934 Signed-off-by: Dave Liu <daveliu@freescale.com>
935 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
937 commit ff9658d7049bf8c8e8e0a05dbe5e9f7e91aa5a5d
938 Author: Dave Liu <daveliu@freescale.com>
939 Date: Mon Jun 25 10:41:04 2007 +0800
941 mpc83xx: Fix the align bug of SDMA buffer
943 According to the latest user manual, the SDMA temporary
944 buffer base address must be 4KB aligned.
946 Signed-off-by: Dave Liu <daveliu@freescale.com>
947 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
949 commit 66dc2c2dc51f8b88bb8e231bc80cd92eae1d6476
950 Author: Dave Liu <daveliu@freescale.com>
951 Date: Mon Jun 25 13:21:12 2007 +0800
953 mpc83xx: Revise the MPC8360EMDS readme doc
955 When the rev2.x silicon mount on the MPC8360EMDS baord,
956 and if you are using the u-boot version after the commit
957 3fc0bd159103b536e1c54c6f4457a09b3aba66ca.
958 to make the ethernet interface usable, we have to setup
959 the jumpers correctly.
961 Signed-off-by: Dave Liu <daveliu@freescale.com>
962 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
964 commit e739bc95797aac4fefc4c75b55c7c78e59d3ea9c
965 Author: Timur Tabi <timur@freescale.com>
966 Date: Tue Jul 3 13:46:32 2007 -0500
968 FSL I2C driver programs the two I2C busses differently
970 The i2c_init() function in fsl_i2c.c programs the two I2C busses differently.
971 The second I2C bus has its slave address programmed incorrectly and is
972 missing a 5-us delay.
974 Signed-off-by: Timur Tabi <timur@freescale.com>
975 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
977 commit df33f6b4d6d63693dd9200808b242de1b86cb8e8
978 Author: Timur Tabi <timur@freescale.com>
979 Date: Tue Jul 3 13:04:34 2007 -0500
981 Update SCCR programming in cpu_init_f() to support all 83xx processors
983 Update the cpu_init_f() function in cpu/mpc83xx/cpu_init.c to program the
984 bitfields for all 83xx processors. The code to update some bitfields was
985 compiled only on some processors. Now, the bitfields are programmed as long
986 as the corresponding CFG_SCCR option is defined in the board header file.
987 This means that the board header file should not define any CFG_SCCR macros
988 for bitfields that don't exist on that processor, otherwise the SCCR will be
989 programmed incorrectly.
991 Signed-off-by: Timur Tabi <timur@freescale.com>
992 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
994 commit 9546266999f0b9b51372636614211b88d90f0f25
995 Author: Martin Krause <martin.krause@tqs.de>
996 Date: Fri Jun 22 13:04:22 2007 +0200
998 TQM834x: cleanup configuraton
1000 Remove irritating #undef DEBUG
1002 Signed-off-by: Martin Krause <martin.krause@tqs.de>
1003 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
1005 commit 5d497e6bf0f5bf63729b4a47b3fd786d3c77a1bc
1006 Author: david.saada <David.Saada@ecitele.com>
1007 Date: Mon Jun 18 09:09:53 2007 -0700
1009 MPC83xx: Fix makefile to generate config.h file in the build directory
1011 MPC83xx: Fix the Makefile config sections to generate the include/config.h
1012 file in the build directory instead of the source directory.
1014 Signed-off-by: David Saada <david.saada@ecitele.com>
1015 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
1017 commit 1ded0242e437259366792d52b7e9d1e1931d8fa5
1018 Author: Lee Nipper <Lee.Nipper@freescale.com>
1019 Date: Thu Jun 14 20:07:33 2007 -0500
1021 mpc83xx: Add support for 8360 silicon revision 2.1
1023 This change adds 8360 silicon revision 2.1 support to u-boot.
1025 Signed-off-by: Lee Nipper <lee.nipper@freescale.com>
1026 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
1028 commit a22806469a8f2b69c829f4fd5361fdebd0cb01b4
1029 Author: Kumar Gala <galak@kernel.crashing.org>
1030 Date: Wed Aug 8 04:14:28 2007 -0500
1032 Treat ppc64 host as ppc
1034 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1036 commit 0dc4279b08ff82472bec2e2c90858602459febe8
1037 Author: Jason Jin <Jason.jin@freescale.com>
1038 Date: Wed Aug 8 09:01:46 2007 +0800
1040 Minor fix for bios emulator makefile
1042 Add $(obj) to LIB avoiding objects be built in the source dir
1044 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
1046 commit ce981dc857adfc8036ca2f6d5d5a06c2a8aa77d6
1047 Author: Jason Jin <Jason.jin@freescale.com>
1048 Date: Wed Aug 8 08:33:11 2007 +0800
1050 Add CONFIG_BIOSEMU define to guard all the bios emulator code
1052 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
1054 This patch fix the compile issue on the board that did not enable the bios emulator
1056 commit ed8106433522f2ea8933e9808346860d061d7731
1057 Author: Zach Sadecki <Zach.Sadecki@ripcode.com>
1058 Date: Tue Jul 31 12:27:25 2007 -0500
1060 tsec: fix multiple PHY support
1062 The change entitled "Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx"
1063 broke multiple PHY support in tsec.c. This fixes it.
1065 Signed-off-by: Zach Sadecki <Zach.Sadecki@ripcode.com>
1066 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
1068 commit dcb84b7208ade0bbebbeb56bec9c2c64f8b2eede
1069 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
1070 Date: Thu Aug 9 09:08:18 2007 -0500
1072 tsec: Allow Ten Bit Interface address to be configurable
1074 Allow the address of the Ten Bit Interface (TBI) to be changed in the
1075 event of a conflict with another device.
1077 Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
1079 commit 7c4c3722a38d40b0cf537ddae72b04f4088b190c
1080 Author: Jason Jin <Jason.jin@freescale.com>
1081 Date: Tue Aug 7 16:17:06 2007 +0800
1083 Add CONFIG_BIOSEMU define to guard all the bios emulator code
1085 This patch fix the compile issue on the board that did not enable the bios emulator
1087 commit bf1060ea4f9eaa7e7d164a70a7d6f28939882053
1088 Author: Wolfgang Denk <wd@denx.de>
1089 Date: Tue Aug 7 16:02:13 2007 +0200
1091 Fix missing brace error in fs/fat/fat.c
1092 [pointed out by Roderik Wildenburg]
1094 Signed-off-by: Wolfgang Denk <wd@denx.de>
1096 commit 6c33c78557ca6f8da68c01ce33e278695197d3f4
1097 Author: Wolfgang Denk <wd@denx.de>
1098 Date: Mon Aug 6 23:21:05 2007 +0200
1100 Fixed typo in README (pointed out by Martin Jost).
1102 Signed-off-by: Wolfgang Denk <wd@denx.de>
1104 commit 9c7e4b06214db61bb21f1bcbe57c97519669baae
1105 Author: Wolfgang Denk <wd@denx.de>
1106 Date: Mon Aug 6 02:17:36 2007 +0200
1108 Coding style cleanup. Update CHANGELOG.
1110 Signed-off-by: Wolfgang Denk <wd@denx.de>
1112 commit 221838cc7eb178370ff62aa05920a582e12ac322
1113 Author: Jason Jin <Jason.jin@freescale.com>
1114 Date: Tue Jul 10 09:03:22 2007 +0800
1116 Remove the bios emulator from MAI board.
1118 The bios emulator in the MAI board can not pass compile
1119 and have a lot of crap in it. remove it and will have a
1120 clean and small bios emulator in the drivers directory
1121 which can be uesed for every board.
1123 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
1125 commit 5618332409bb96f4448d1712899369fc80c0b489
1126 Author: Jason Jin <Jason.jin@freescale.com>
1127 Date: Fri Jul 13 12:14:59 2007 +0800
1129 Fix some compile issues for MAI board.
1131 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
1133 commit 0f460a1ee148b648ee242c3157650287d4296260
1134 Author: Jason Jin <Jason.jin@freescale.com>
1135 Date: Fri Jul 13 12:14:58 2007 +0800
1137 Configurations for ATI video card BIOS emulator
1139 This patch add definition of the BIOS emulator and the ATI framebuffer
1140 driver for MPC8641HPCN board.
1142 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
1143 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
1145 commit ece92f85053b8df613edcf05b26a416cbc3d629c
1146 Author: Jason Jin <Jason.jin@freescale.com>
1147 Date: Fri Jul 6 08:34:56 2007 +0800
1149 This is a BIOS emulator, porting from SciTech for u-boot, mainly for
1150 ATI video card BIOS. and can be used for x86 code emulation by some
1153 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
1155 commit 5072188acabde3178fac7f5a597150e6e74fd40c
1156 Author: Jason Jin <Jason.jin@freescale.com>
1157 Date: Fri Jul 6 08:33:33 2007 +0800
1159 This is a framebuffer driver for ATI video card, can work for PCI9200,
1160 X300, X700, X800 ATI video cards.
1162 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
1163 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
1165 commit 5728be389e65fd47f34b33c2596271eb4db751ae
1166 Author: Wolfgang Denk <wd@denx.de>
1167 Date: Mon Aug 6 01:01:49 2007 +0200
1169 Coding style cleanup. Update CHANGELOG.
1171 Signed-off-by: Wolfgang Denk <wd@denx.de>
1173 commit 8092fef4c29b395958bb649647da7e3775731517
1174 Author: Martin Krause <Martin.Krause@tqs.de>
1175 Date: Tue Dec 12 14:26:01 2006 +0100
1177 Add functions to list of exported functions
1179 Additionally export the following fuctions (to make trab_config build again):
1183 Also bump the ABI version to reflect this change
1185 Signed-off-by: Martin Krause <martin.krause@tqs.de>
1187 commit 63cec5814fab5d2b1c86982327433807a5ac0249
1188 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
1189 Date: Thu Aug 2 14:09:49 2007 -0500
1191 Make MPC8641's PCI/PCI-E driver a common driver for many FSL parts.
1193 All of the PCI/PCI-Express driver and initialization code that
1194 was in the MPC8641HPCN port has now been moved into the common
1195 drivers/fsl_pci_init.c. In a subsequent patch, this will be
1196 utilized by the 85xx ports as well.
1198 Common PCI-E IMMAP register blocks for FSL 85xx/86xx are added.
1200 Also enable the second PCI-Express controller on 8641
1201 by getting its BATS and CFG_ setup right.
1203 Fixed a u16 vendor compiler warning in AHCI driver too.
1205 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
1206 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
1207 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1209 commit 86b116b1b1e165ca4840daefed36d2e3b8460173
1210 Author: Bartlomiej Sieka <tur@semihalf.com>
1211 Date: Fri Aug 3 12:08:16 2007 +0200
1213 cm1_qp1 -> cm5200: single U-Boot image for modules from the cm5200 family.
1215 Add the ability for modules from the Schindler cm5200 family to use a
1216 single U-Boot image:
1217 - rename cm1_qp1 to cm5200
1218 - add run-time module detection
1219 - parametrize SDRAM configuration according to the module we are running on
1221 Few minor, board-specific fixes included in this patch:
1222 - better MAC address handling
1223 - updated default environment ('update' command uses +{filesize} now)
1224 - improved error messages in the auto-update code
1225 - allow booting U-Boot from RAM (CFG_RAMBOOT)
1227 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
1228 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
1229 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
1231 commit c7e717ebc2b044d7a71062552c9dc0f54ea9b779
1232 Author: Andy Fleming <afleming@freescale.com>
1233 Date: Fri Aug 3 04:05:25 2007 -0500
1235 Add Marvell 1149 PHY support to the TSEC
1237 commit b1b54e352028ed370c3aa95d6fdeb9d64c5d2f86
1238 Author: Wolfgang Denk <wd@denx.de>
1239 Date: Thu Aug 2 21:27:46 2007 +0200
1241 Coding style cleanup, update CHANGELOG
1243 Signed-off-by: Wolfgang Denk <wd@denx.de>
1245 commit 63e22764d2f8653f68888c667eb65b3996b52680
1246 Author: Wolfgang Denk <wd@denx.de>
1247 Date: Thu Aug 2 10:11:18 2007 +0200
1249 Minor cleanup of <board>_nand build rules.
1251 commit cdd917a43da6fa7fc8f54a3cc9f420ce5ecf3197
1252 Author: Wolfgang Denk <wd@denx.de>
1253 Date: Thu Aug 2 00:48:45 2007 +0200
1255 Fix build errors and warnings / code cleanup.
1257 Signed-off-by: Wolfgang Denk <wd@denx.de>
1259 commit 8993e54b6f397973794f3d6f47d3b3c0c98dd4f6
1260 Author: Rafal Jaworowski <raj@semihalf.com>
1261 Date: Fri Jul 27 14:43:59 2007 +0200
1263 [ADS5121] Support for the ADS5121 board
1265 The following MPC5121e subsystems are supported:
1267 - low-level CPU init
1268 - NOR Boot Flash (common CFI driver)
1274 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
1275 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
1276 Signed-off-by: Jan Wrobel <wrr@semihalf.com>
1278 commit 1863cfb7b100ba0ee3401799457a01dc058745f8
1279 Author: Rafal Jaworowski <raj@semihalf.com>
1280 Date: Fri Jul 27 14:22:04 2007 +0200
1282 [PPC] Remove unused MSR_USER definition
1284 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
1286 commit cc3023b9f95d7ac959a764471a65001062aecf41
1287 Author: Rafal Jaworowski <raj@semihalf.com>
1288 Date: Thu Jul 19 17:12:28 2007 +0200
1290 Fix breakage of 8xx boards from recent commit.
1292 This patch fixes the negative consequences for 8xx of the recent
1293 "ppc4xx: Clean up 440 exceptions handling" commit.
1295 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
1297 commit 3a6cab844cf74f76639d795e0be8717e02c86af7
1298 Author: Wolfgang Denk <wd@denx.de>
1299 Date: Sat Jul 14 22:51:02 2007 +0200
1303 Signed-off-by: Wolfgang Denk <wd@denx.de>
1305 commit 011595307731a7a67a7445d107c279d031e8ab97
1306 Author: Heiko Schocher <hs@pollux.denx.de>
1307 Date: Sat Jul 14 01:06:58 2007 +0200
1309 [PCS440EP] - fix compile error, if BUILD_DIR is used
1311 commit fad63407154f46246ce80d53a9c669a44362ac67
1312 Author: Heiko Schocher <hs@pollux.denx.de>
1313 Date: Fri Jul 13 09:54:17 2007 +0200
1315 make show_boot_progress () weak.
1317 Signed-off-by: Heiko Schocher <hs@denx.de>
1319 commit 907902472391b6ca1876ec300687562ecaf459b1
1320 Author: Heiko Schocher <hs@pollux.denx.de>
1321 Date: Fri Jul 13 08:26:05 2007 +0200
1323 [PCS440EP] - The DIAG LEDs are now blinking, if an error occur
1324 - fix compile error, if BUILD_DIR is used
1326 Signed-off-by: Heiko Schocher <hs@denx.de>
1328 commit 239f05ee4dd4cfe0b50f251b533dcebe9e67c360
1329 Author: Wolfgang Denk <wd@denx.de>
1330 Date: Thu Jul 12 01:45:34 2007 +0200
1332 Update CHANGELOG, minor coding style cleanup.
1334 Signed-off-by: Wolfgang Denk <wd@denx.de>
1336 commit 5a56af3b522ba47fb33a3fee84d23bf1e5429654
1337 Author: Andy Fleming <afleming@freescale.com>
1338 Date: Fri Jun 8 16:41:18 2007 -0500
1340 Remove erroneous errata code from Marvel 88E1111S driver
1342 The Marvel 88E1111S driver for the TSEC was copied from the
1343 88E1101 driver, and included a fix for an erratum which does not
1344 exist on that part. Now it is removed
1346 Signed-off-by: Andy Fleming <afleming@freescale.com>
1348 commit 982efcf23fd03647e01e2fbe28a7a36239156cc0
1349 Author: Andy Fleming <afleming@freescale.com>
1350 Date: Tue Jun 5 16:38:44 2007 -0500
1352 From: eran liberty <eran.liberty@gmail.com>
1354 adds the reset register to 85xx immap
1356 Signed-off-by: Eran Liberty <eran.liberty@gmail.com>
1357 Signed-off-by: Andy Fleming <afleming@freescale.com>
1359 commit d3ec0d943a045bdb99e159e7bbc77430e09f11d7
1360 Author: Andy Fleming <afleming@freescale.com>
1361 Date: Thu May 10 17:50:01 2007 -0500
1363 Polished the 85xx ADS config files
1365 Made the boot commands use device trees by default.
1366 Also moved the ramdisk to 1000000 (I think the previous address
1367 was getting overridden during boot).
1369 Signed-off-by: Andy Fleming <afleming@freescale.com>
1371 commit bfb37b32d1b0b03f18077dba49cc66a6e76fa038
1372 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
1373 Date: Wed May 9 11:03:32 2007 -0500
1375 8544ds: Fix Makefile after moving pixis to board/freescale.
1377 The OBJTREE != SRCTREE build scenario was broken.
1380 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
1381 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1383 commit 2a3cee43c3b71fa5b8d91db19f05067865290f3e
1384 Author: Andy Fleming <afleming@freescale.com>
1385 Date: Wed May 9 00:54:20 2007 -0500
1387 tsec: Fix PHY code to match first driver
1389 Jarrold Wen noticed that the generic PHY code always matches
1390 under the current implementation. Change it so the first match
1391 wins, and *only* unknown PHYs trigger the generic driver
1393 Signed-off-by: Andy Fleming <afleming@freescale.com>
1395 commit ccc091aac61a38cd998d575d92f7232e256d6312
1396 Author: Andy Fleming <afleming@freescale.com>
1397 Date: Tue May 8 17:27:43 2007 -0500
1399 Add support for CPM device tree configuration to 8560 ADS
1401 * Adds code to modify CPM frequencies
1402 * Cleans up the config file to #define TSEC and (for now) #undef FCC
1403 * Adds the MII command for all 8560 ADS configurations
1404 * Updates config file to provide convenience commands for booting
1407 Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
1408 Signed-off-by: Andy Fleming <afleming@freescale.com>
1410 commit 7507d56ccaf7aae1c474342a9a5540165cd7e9d9
1411 Author: Andy Fleming <afleming@freescale.com>
1412 Date: Tue May 8 17:23:02 2007 -0500
1414 Fix Marvell 88e1145 PHY init code
1416 Fix a bug in the Marvell 88e1145 PHY init code in the TSEC driver
1417 where the reset was being done after the errata code instead of
1420 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
1421 Signed-off-by: Andy Fleming <afleming@freescale.com>
1423 commit 5dc210dec5bace98a50b6ba905347890091a9bb0
1424 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
1425 Date: Wed Jul 11 14:52:16 2007 -0500
1427 Add simple agent/end-point configuration in PCI AutoConfig for PCI_CLASS_PROCESSOR_POWERPC.
1429 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
1431 commit e8b85f3ba4cd8930e0a2fea2100c815d64201765
1432 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
1433 Date: Wed Jul 11 14:52:08 2007 -0500
1435 pciauto setup bridge
1437 The P2P bridge bus numbers programmed into the device are relative to
1440 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
1442 commit 571f49fa717004ca4268b4e24057efc7bf9f987b
1443 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
1444 Date: Wed Jul 11 14:52:01 2007 -0500
1446 Support PCIe extended config registers
1448 FSL PCIe block has extended cfg registers in the 100 and 400 range.
1449 For example, to read the LTSSM register: pci display <busn>.0 404 1
1451 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
1453 commit ba5feb12581bb2912ce301e4866b71f846e9fc07
1454 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
1455 Date: Wed Jul 11 14:51:48 2007 -0500
1457 Minor improvements to drivers/pci_auto.c
1459 - Make pciauto_{pre,post}scan_setup_bridge non-static
1460 - Added physical address display in debug messages.
1462 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
1464 commit 40e81addab7bb74d20ddf681ce9babc880a828ee
1465 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
1466 Date: Wed Jul 11 14:51:35 2007 -0500
1468 Start pci hose scan from hose->current_busno.
1470 Ensure hose->current_busno is not less than first_busno. This fixes
1471 broken board code which leaves current_busno=0 when first_busno is
1472 greater than 0 for the cases with multiple controllers.
1474 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
1476 commit 3865b1fb7843a08ad49a6319a36415752276ff48
1477 Author: Stefan Roese <sr@denx.de>
1478 Date: Wed Jul 11 12:13:53 2007 +0200
1480 Fix some compile problems introduced by the latest CFG_CMD_xxx cleanup
1482 Signed-off-by: Stefan Roese <sr@denx.de>
1484 commit fa1df308926a6f70e3504c57514ef27ac31fd13a
1485 Author: Bartlomiej Sieka <tur@semihalf.com>
1486 Date: Wed Jul 11 20:11:07 2007 +0200
1488 CM1.QP1: Support for the Schindler CM1.QP1 board.
1490 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
1491 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
1493 commit 96e1d75be8193ca79e4215a368bf9d7f2362450f
1494 Author: Heiko Schocher <hs@pollux.denx.de>
1495 Date: Wed Jul 11 18:39:11 2007 +0200
1497 [PCS440EP] - Show on the DIAG LEDs, if the SHA1 check failed
1498 - now the Flash ST M29W040B is supported (not tested)
1499 - fix the "led" command
1500 - fix compile error, if BUILD_DIR is used
1502 Signed-off-by: Heiko Schocher <hs@denx.de>
1504 commit e9514751cfa5cce61ea699fa0d3eb37898a5eeb5
1505 Author: Stefan Roese <sr@denx.de>
1506 Date: Sun Jul 8 13:44:27 2007 +0200
1508 Fix malloc problem introduced with the relocation fixup for the PPC platform
1510 The relocation fixup didn't handle the malloc pointer initialization
1511 correctly. This patch fixes this problem. Tested successfully on 4xx.
1512 The relocation fixup patches for 4xx will follow soon.
1514 Signed-off-by: Stefan Roese <sr@denx.de>
1516 commit b3aff0cb9ecf236d7e8c93761dd1dadf6837a582
1517 Author: Jon Loeliger <jdl@freescale.com>
1518 Date: Tue Jul 10 11:19:50 2007 -0500
1520 disk/ doc/ lib_*/ and tools/: Remove lingering references to CFG_CMD_* symbols.
1522 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
1523 Those always evaluated TRUE, and thus were always compiled
1524 even when IDE really wasn't defined/wanted.
1526 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1528 commit ddb5d86f0215bcb6c293510c50eb050e92883b7a
1529 Author: Jon Loeliger <jdl@freescale.com>
1530 Date: Tue Jul 10 11:13:21 2007 -0500
1532 drivers/: Remove lingering references to CFG_CMD_* symbols.
1534 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
1535 Those always evaluated TRUE, and thus were always compiled
1536 even when IDE really wasn't defined/wanted.
1538 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1540 commit f40a7f3e3888b42a43674b099e5470022c8c544c
1541 Author: Jon Loeliger <jdl@freescale.com>
1542 Date: Tue Jul 10 11:07:56 2007 -0500
1544 fs/: Remove lingering references to CFG_CMD_* symbols.
1546 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
1547 Those always evaluated TRUE, and thus were always compiled
1548 even when IDE really wasn't defined/wanted.
1550 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1552 commit 610f2e9c28a9c101e09fa1b78143cf5f00ed1593
1553 Author: Jon Loeliger <jdl@freescale.com>
1554 Date: Tue Jul 10 11:05:02 2007 -0500
1556 net/: Remove lingering references to CFG_CMD_* symbols.
1558 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
1559 Those always evaluated TRUE, and thus were always compiled
1560 even when IDE really wasn't defined/wanted.
1562 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1564 commit 902531788376046da212afd1661cffb62f3daa1c
1565 Author: Jon Loeliger <jdl@freescale.com>
1566 Date: Tue Jul 10 11:02:44 2007 -0500
1568 common/: Remove lingering references to CFG_CMD_* symbols.
1570 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
1571 Those always evaluated TRUE, and thus were always compiled
1572 even when IDE really wasn't defined/wanted.
1574 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1576 commit d39b57415838c73fb0a37eca84de3c68ba990586
1577 Author: Jon Loeliger <jdl@freescale.com>
1578 Date: Tue Jul 10 10:48:22 2007 -0500
1580 board/[j-z]*: Remove lingering references to CFG_CMD_* symbols.
1582 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
1583 Those always evaluated TRUE, and thus were always compiled
1584 even when IDE really wasn't defined/wanted.
1586 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1588 commit 77a318545d57aefa844752465b94c7e09a3f26d0
1589 Author: Jon Loeliger <jdl@freescale.com>
1590 Date: Tue Jul 10 10:39:10 2007 -0500
1592 board/[A-Za-i]*: Remove lingering references to CFG_CMD_* symbols.
1594 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
1595 Those always evaluated TRUE, and thus were always compiled
1596 even when IDE really wasn't defined/wanted.
1598 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1600 commit 068b60a0eb7e73b243ca55399f2a7df76e2c3f3d
1601 Author: Jon Loeliger <jdl@freescale.com>
1602 Date: Tue Jul 10 10:27:39 2007 -0500
1604 cpu/ rtc/ include/: Remove lingering references to CFG_CMD_* symbols.
1606 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1608 commit 079a136c3588814784561d6e4856970ee82d6e2a
1609 Author: Jon Loeliger <jdl@freescale.com>
1610 Date: Tue Jul 10 10:12:10 2007 -0500
1612 include/configs/[p-z]* + misc: Cleanup BOOTP and lingering CFG_CMD_*.
1614 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
1615 used to be included but CONFIG_BOOTP_MASK was not defined.
1617 Remove lingering references to CFG_CMD_* symbols.
1619 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1621 commit 7f5c01577400c74cc5bac74f41dd0d3c79df623c
1622 Author: Jon Loeliger <jdl@freescale.com>
1623 Date: Tue Jul 10 09:38:02 2007 -0500
1625 include/configs/[g-o]*: Cleanup BOOTP and lingering CFG_CMD_*.
1627 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
1628 used to be included but CONFIG_BOOTP_MASK was not defined.
1630 Remove lingering references to CFG_CMD_* symbols.
1632 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1634 commit 80ff4f99b84b64edca3fd10da365ec1493be1c95
1635 Author: Jon Loeliger <jdl@freescale.com>
1636 Date: Tue Jul 10 09:29:01 2007 -0500
1638 include/configs/[a-e]*: Cleanup BOOTP and lingering CFG_CMD_*.
1640 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
1641 used to be included but CONFIG_BOOTP_MASK was not defined.
1643 Remove lingering references to CFG_CMD_* symbols.
1645 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1647 commit a1aa0bb502e25fd598b5e0ccdfb2c174921d714a
1648 Author: Jon Loeliger <jdl@freescale.com>
1649 Date: Tue Jul 10 09:22:23 2007 -0500
1651 include/configs/[P-Z]*: Cleanup BOOTP and lingering CFG_CMD_*.
1653 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
1654 used to be included but CONFIG_BOOTP_MASK was not defined.
1656 Remove lingering references to CFG_CMD_* symbols.
1658 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1660 commit 659e2f6736232a08acca8785c206e2b4d9cd07d7
1661 Author: Jon Loeliger <jdl@freescale.com>
1662 Date: Tue Jul 10 09:10:49 2007 -0500
1664 include/configs/[J-O]*: Cleanup BOOTP and lingering CFG_CMD_*.
1666 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
1667 used to be included but CONFIG_BOOTP_MASK was not defined.
1669 Remove lingering references to CFG_CMD_* symbols.
1671 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1673 commit 11799434c5ff15a612577bb1ad1f4ea1a0595e4b
1674 Author: Jon Loeliger <jdl@freescale.com>
1675 Date: Tue Jul 10 09:02:57 2007 -0500
1677 include/configs/[A-I]*: Cleanup BOOTP and lingering CFG_CMD_*.
1679 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
1680 used to be included but CONFIG_BOOTP_MASK was not defined.
1682 Remove lingering references to CFG_CMD_* symbols.
1684 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1686 commit 1fe80d79c5c4e52d3410a7ab4b8515da095cdab3
1687 Author: Jon Loeliger <jdl@freescale.com>
1688 Date: Mon Jul 9 22:08:34 2007 -0500
1690 Finally retire cmd_confdefs.h and CONFIG_BOOTP_MASK!
1692 All of the choices for CONFIG_BOOTP_ are now documented in
1693 the README file. You must now individually select exactly
1694 the set that you want using a series of
1695 #define CONFIG_BOOTP_<x>
1696 statements in the board port config files now.
1698 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1700 commit d3b8c1a743dcd31625c99e6a44590f207eb00028
1701 Author: Jon Loeliger <jdl@freescale.com>
1702 Date: Mon Jul 9 21:57:31 2007 -0500
1704 include/configs/[m-z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
1706 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1708 commit 2fd90ce575b02d189cbf443c85309bcd001aa393
1709 Author: Jon Loeliger <jdl@freescale.com>
1710 Date: Mon Jul 9 21:48:26 2007 -0500
1712 include/configs/[a-m]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
1714 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1716 commit 37d4bb70586659dedef1658ce1bed071be098aec
1717 Author: Jon Loeliger <jdl@freescale.com>
1718 Date: Mon Jul 9 21:38:02 2007 -0500
1720 include/configs/[T-Z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
1722 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1724 commit 18225e8dd1950bd6dbf35011e436db7f474c187d
1725 Author: Jon Loeliger <jdl@freescale.com>
1726 Date: Mon Jul 9 21:31:24 2007 -0500
1728 include/configs/[P-S]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
1730 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1732 commit 7be044e4ea644b0ef1c486dadc1a4c2665b4374d
1733 Author: Jon Loeliger <jdl@freescale.com>
1734 Date: Mon Jul 9 21:24:19 2007 -0500
1736 include/configs/[H-N]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
1738 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1740 commit 5d2ebe1b3ef0055c661bb1a0d252bf252380069f
1741 Author: Jon Loeliger <jdl@freescale.com>
1742 Date: Mon Jul 9 21:16:53 2007 -0500
1744 include/configs/[A-G]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
1746 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1748 commit f55f7f8d83f36021ab1f0e3d738f5d8c8083a7e3
1749 Author: Jon Loeliger <jdl@freescale.com>
1750 Date: Mon Jul 9 19:12:30 2007 -0500
1752 Retire CONFIG_COMMANDS finally.
1753 Strip old CFG_CMD_* symbols out.
1755 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1757 commit b5501f7d720fed99ab0b42c83f5dea52868ce007
1758 Author: Jon Loeliger <jdl@freescale.com>
1759 Date: Mon Jul 9 19:10:03 2007 -0500
1761 Update README.* to reference new CONFIG_CMD_* names now.
1763 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1765 commit 4431283c7e6d54ae180d466e51bf2d97471a0ad9
1766 Author: Jon Loeliger <jdl@freescale.com>
1767 Date: Mon Jul 9 19:06:00 2007 -0500
1769 cpu/m*: Remove obsolete references to CONFIG_COMMANDS
1771 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1773 commit 3a1ed1e1f922c419bb71f7df4949d783ade369fa
1774 Author: Jon Loeliger <jdl@freescale.com>
1775 Date: Mon Jul 9 18:57:22 2007 -0500
1777 cpu/[7a-ln-z]*: Remove obsolete references to CONFIG_COMMANDS
1779 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1781 commit ab3abcbabd840928fb1eb5122118ca466b5e5013
1782 Author: Jon Loeliger <jdl@freescale.com>
1783 Date: Mon Jul 9 18:45:16 2007 -0500
1785 board/[q-z]*: Remove obsolete references to CONFIG_COMMANDS
1787 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1789 commit 3fe00109a5f12de55b6e25b1f98dfc24bc9090c9
1790 Author: Jon Loeliger <jdl@freescale.com>
1791 Date: Mon Jul 9 18:38:39 2007 -0500
1793 board/[m-p]*: Remove obsolete references to CONFIG_COMMANDS
1795 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1797 commit c508a4cefd8a953fc64957650506a035e6e3d9d1
1798 Author: Jon Loeliger <jdl@freescale.com>
1799 Date: Mon Jul 9 18:31:28 2007 -0500
1801 board/[f-l]*: Remove obsolete references to CONFIG_COMMANDS
1803 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1805 commit b9307262f8a9f3b5c9e15a6067eadc17407146f6
1806 Author: Jon Loeliger <jdl@freescale.com>
1807 Date: Mon Jul 9 18:24:55 2007 -0500
1809 board/[d-e]*: Remove obsolete references to CONFIG_COMMANDS
1811 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1813 commit fcec2eb93e126400009729328e797f12bc94f1fd
1814 Author: Jon Loeliger <jdl@freescale.com>
1815 Date: Mon Jul 9 18:19:09 2007 -0500
1817 board/[A-Za-c]*: Remove obsolete references to CONFIG_COMMANDS
1819 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1821 commit a593814f2be0c9cdc3133cd550b167b8a988328f
1822 Author: Jon Loeliger <jdl@freescale.com>
1823 Date: Mon Jul 9 18:10:50 2007 -0500
1825 rtc/: Remove obsolete references to CONFIG_COMMANDS
1827 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1829 commit 67350568f9d46e66c21829f3513b3db0caeb948b
1830 Author: Jon Loeliger <jdl@freescale.com>
1831 Date: Mon Jul 9 18:05:38 2007 -0500
1833 lib_{arm,avr32,blackfin,generic,i386}/: Remove obsolete references to CONFIG_COMMANDS
1835 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1837 commit 7def6b34f910f08d7ef0a14646da067719237ca2
1838 Author: Jon Loeliger <jdl@freescale.com>
1839 Date: Mon Jul 9 18:02:11 2007 -0500
1841 lib_{m68k,microblaze,mips,ppc}/: Remove obsolete references to CONFIG_COMMANDS
1843 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1845 commit dd60d1223b99a88a7216f3e041fe40634ad4c2bb
1846 Author: Jon Loeliger <jdl@freescale.com>
1847 Date: Mon Jul 9 17:56:50 2007 -0500
1849 fs/: Remove obsolete references to CONFIG_COMMANDS
1851 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1853 commit c91898bbc505aff3e12a807af88e76da18efb7ee
1854 Author: Jon Loeliger <jdl@freescale.com>
1855 Date: Mon Jul 9 17:46:09 2007 -0500
1857 tools/: Remove obsolete references to CONFIG_COMMANDS
1859 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1861 commit 643d1ab23960950b52e0a2803c2d3ea4c558fa01
1862 Author: Jon Loeliger <jdl@freescale.com>
1863 Date: Mon Jul 9 17:45:14 2007 -0500
1865 net/: Remove obsolete references to CONFIG_COMMANDS
1867 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1869 commit cb51c0bf88f95a1bca68324b0126f8eed8b43273
1870 Author: Jon Loeliger <jdl@freescale.com>
1871 Date: Mon Jul 9 17:39:42 2007 -0500
1873 drivers/[n-z]*: Remove obsolete references to CONFIG_COMMANDS
1875 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1877 commit 07d38a17e964aec4c7827f0ee9a583bc8cc1ad6b
1878 Author: Jon Loeliger <jdl@freescale.com>
1879 Date: Mon Jul 9 17:30:01 2007 -0500
1881 drivers/[a-m]*: Remove obsolete references to CONFIG_COMMANDS
1883 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1885 commit cde5c64d17cf4834aa7b5c373f288bc7dad27b29
1886 Author: Jon Loeliger <jdl@freescale.com>
1887 Date: Mon Jul 9 17:22:37 2007 -0500
1889 disk/: Remove obsolete references to CONFIG_COMMANDS
1891 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1893 commit 639221c76c88215bd55af83ad174fc30d1940f8f
1894 Author: Jon Loeliger <jdl@freescale.com>
1895 Date: Mon Jul 9 17:15:49 2007 -0500
1897 include/: Remove obsolete references to CONFIG_COMMANDS
1898 Mostly removed from comments here.
1900 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1902 commit 4ef218f6fdf8d747f4589da5252b004e7d2c2876
1903 Author: Wolfgang Denk <wd@denx.de>
1904 Date: Tue Jul 10 00:01:28 2007 +0200
1906 Coding style cleanup; update CHANGELOG.
1908 Signed-off-by: Wolfgang Denk <wd@denx.de>
1910 commit c3517f919d0f61650cf3027fd4faf0f631142f6c
1911 Author: Jon Loeliger <jdl@freescale.com>
1912 Date: Sun Jul 8 18:10:08 2007 -0500
1914 common/* non-cmd*: Remove obsolete references to CONFIG_COMMANDS
1916 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1918 commit fd9bcaa35be64fe41a4223fdb6ecdbad52470b39
1919 Author: Jon Loeliger <jdl@freescale.com>
1920 Date: Sun Jul 8 18:05:39 2007 -0500
1922 common/cmd_[p-x]*: Remove obsolete references to CONFIG_COMMANDS.
1924 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1926 commit c76fe47425afc7d5d670ff0539823c85d65d9c42
1927 Author: Jon Loeliger <jdl@freescale.com>
1928 Date: Sun Jul 8 18:02:23 2007 -0500
1930 common/cmd_[i-n]*: Remove obsolete references to CONFIG_COMMANDS.
1932 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1934 commit baa26db4113679b80970ff447d91cc10217742a6
1935 Author: Jon Loeliger <jdl@freescale.com>
1936 Date: Sun Jul 8 17:51:39 2007 -0500
1938 common/cmd_[af]*: Remove obsolete references to CONFIG_COMMANDS.
1940 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1942 commit af075ee96e52dda7b6bca6c937588aeaaec5f2cd
1943 Author: Jon Loeliger <jdl@freescale.com>
1944 Date: Sun Jul 8 17:02:01 2007 -0500
1946 Clear up confusion over the CMD_POST and POST_DIAG mess.
1948 For some reason, CONFIG_POST permeated as CONFIG_CMD_POST_DIAG
1949 when it really means just CONFIG_CMD_DIAG. There is no CMD_POST.
1950 Clear this mess up some.
1952 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1954 commit b3631487105a57ab7cbadfc26efbaf9676275018
1955 Author: Jon Loeliger <jdl@freescale.com>
1956 Date: Sun Jul 8 15:45:08 2007 -0500
1958 Remove references to the old cmd_confdefs.h include file.
1960 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1962 commit a22d4da95e20049b4daa1c2a022f61e8a72f2fb6
1963 Author: Jon Loeliger <jdl@freescale.com>
1964 Date: Sun Jul 8 15:42:59 2007 -0500
1966 include/configs: Catch some CONFIG_CMD_* conversion stragglers.
1968 Use new CONFIG_CMD_* in lwmon5.h board config file.
1969 Fix CONFIG_CMD_* typo braindamage in omap1510inn.h
1971 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1973 commit a5562901661bd428f7e5feb333f796372cb81019
1974 Author: Jon Loeliger <jdl@freescale.com>
1975 Date: Sun Jul 8 15:31:57 2007 -0500
1977 include/configs: Use new CONFIG_CMD_* in various [TUVWZYZ]* named board config files.
1979 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1981 commit fe7f782d5b8c64a0195c68c31a0a11d4f641355e
1982 Author: Jon Loeliger <jdl@freescale.com>
1983 Date: Sun Jul 8 15:02:44 2007 -0500
1985 include/configs: Use new CONFIG_CMD_* in various S* named board config files.
1987 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1989 commit e9a0f8f15c11f337967aa0600ad6e8af33037f50
1990 Author: Jon Loeliger <jdl@freescale.com>
1991 Date: Sun Jul 8 15:12:40 2007 -0500
1993 include/configs: Use new CONFIG_CMD_* in various R* named board config files.
1995 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1997 commit 12aa9fd23d724bd6ab88e1baa0db35133a27303f
1998 Author: Jon Loeliger <jdl@freescale.com>
1999 Date: Sun Jul 8 14:55:07 2007 -0500
2001 include/configs: Use new CONFIG_CMD_* in various Q* named board config files.
2003 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2005 commit acf0269779422f3e147d2ddfb499c9f6ff10ad5e
2006 Author: Jon Loeliger <jdl@freescale.com>
2007 Date: Sun Jul 8 14:49:44 2007 -0500
2009 include/configs: Use new CONFIG_CMD_* in various P* named board config files.
2011 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2013 commit e18a1061a8630cb67995fdf99afd3fb50d1b187d
2014 Author: Jon Loeliger <jdl@freescale.com>
2015 Date: Sun Jul 8 14:21:43 2007 -0500
2017 include/configs: Use new CONFIG_CMD_* in various [NO]* named board config files.
2019 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2021 commit 8353e139bfad9059c54f5b2421f1a3090e15a2e2
2022 Author: Jon Loeliger <jdl@freescale.com>
2023 Date: Sun Jul 8 14:14:17 2007 -0500
2025 include/configs: Use new CONFIG_CMD_* in various M* named board config files.
2027 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2029 commit 348f258f24253433e4a2302a0bbceb6740a67246
2030 Author: Jon Loeliger <jdl@freescale.com>
2031 Date: Sun Jul 8 13:46:18 2007 -0500
2033 include/configs: Use new CONFIG_CMD_* in various [IJKL]* named board config files.
2035 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2037 commit 6c4f4da9bfc9f9403f54fce678ed0364b7c86a6a
2038 Author: Jon Loeliger <jdl@freescale.com>
2039 Date: Sun Jul 8 10:09:35 2007 -0500
2041 include/configs: Use new CONFIG_CMD_* in various H* named board config files.
2043 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2045 commit 60a0876b5106b34220e459c208bbf648073306c0
2046 Author: Jon Loeliger <jdl@freescale.com>
2047 Date: Sat Jul 7 21:04:26 2007 -0500
2049 include/configs: Use new CONFIG_CMD_* in various F* and G* named board config files.
2051 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2053 commit dcaa71562826a2466e894c868d132509dcda8444
2054 Author: Jon Loeliger <jdl@freescale.com>
2055 Date: Sat Jul 7 20:56:05 2007 -0500
2057 include/configs: Use new CONFIG_CMD_* in various E* named board config files.
2059 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2061 commit 3c3227f3c737502311b25b72084573901cbbf17d
2062 Author: Jon Loeliger <jdl@freescale.com>
2063 Date: Sat Jul 7 20:40:43 2007 -0500
2065 include/configs: Use new CONFIG_CMD_* in various D* named board config files.
2067 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2069 commit 49cf7e8ee7ef943fdfe866ce28410b0bfbf6a26c
2070 Author: Jon Loeliger <jdl@freescale.com>
2071 Date: Thu Jul 5 19:52:35 2007 -0500
2073 include/configs: Use new CONFIG_CMD_* in various C* named board config files.
2075 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2077 commit de8b2a6e33298dcdb10bdda48db25e53c3089eba
2078 Author: Jon Loeliger <jdl@freescale.com>
2079 Date: Thu Jul 5 19:32:07 2007 -0500
2081 include/configs: Use new CONFIG_CMD_* in various B* named board config files.
2083 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2085 commit 498ff9a228485bd4b9f23d066bada268f9add1dd
2086 Author: Jon Loeliger <jdl@freescale.com>
2087 Date: Thu Jul 5 19:13:52 2007 -0500
2089 include/configs: Use new CONFIG_CMD_* in various A* named board config files.
2091 Since ADS860.h includes "board/fads/fads.h" with ramifications
2092 on the CONFIG_COMMAND treatment, it too has to be adjusted to
2093 exclude already configured commands in this same commit.
2095 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2097 commit 6b0a174a1e6f55e1f5a1fbb223cdad7645a4646e
2098 Author: Stefan Roese <sr@denx.de>
2099 Date: Fri Jul 6 09:45:47 2007 +0200
2101 Fix problem with get/setdcr commands introduced by cfg patches
2103 Signed-off-by: Stefan Roese <sr@denx.de>
2105 commit f1152f8c28db4a22087c21c618a3f7baa48e9a4f
2106 Author: Wolfgang Denk <wd@denx.de>
2107 Date: Fri Jul 6 02:50:19 2007 +0200
2109 Code cleanup and default config update for STC GP3 SSA board.
2111 Signed-off-by: Wolfgang Denk <wd@denx.de>
2113 commit e4dbe1b215f5c6c462e76909d240bd96472b84de
2114 Author: Wolfgang Denk <wd@denx.de>
2115 Date: Thu Jul 5 17:56:27 2007 +0200
2117 Fixing some typos etc. introduced mainly by cfg patches.
2119 Signed-off-by: Wolfgang Denk <wd@denx.de>
2121 commit b6b4684546809f89c8bac72863ca49b5fd8ac0cd
2122 Author: Wolfgang Denk <wd@denx.de>
2123 Date: Thu Jul 5 11:12:16 2007 +0200
2125 Minor coding style cleanup. Update CHANGELOG.
2127 commit dca3b3d6d6396b67e5e84af53452164923c73443
2128 Author: Jon Loeliger <jdl@jdl.com>
2129 Date: Wed Jul 4 22:33:46 2007 -0500
2131 include/configs: Use new CONFIG_CMD_* in various [v-z]* named board config files.
2133 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2135 commit 6c18eb9804b525f3e4f3bb3d014dd69a200d9fa7
2136 Author: Jon Loeliger <jdl@jdl.com>
2137 Date: Wed Jul 4 22:33:38 2007 -0500
2139 include/configs: Use new CONFIG_CMD_* in various t* and u* named board config files.
2141 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2143 commit 46da1e96b7db14f4fcd2c92544e7c0862024bc76
2144 Author: Jon Loeliger <jdl@jdl.com>
2145 Date: Wed Jul 4 22:33:30 2007 -0500
2147 include/configs: Use new CONFIG_CMD_* in various s* named board config files.
2149 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2151 commit 90cc3eb6d2be856d9ddd81436de9cf343bc6b5c8
2152 Author: Jon Loeliger <jdl@jdl.com>
2153 Date: Wed Jul 4 22:33:23 2007 -0500
2155 include/configs: Use new CONFIG_CMD_* in various q* and r* named board config files.
2157 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2159 commit 26a34560d56a9df5bc2ae23525d9229736134757
2160 Author: Jon Loeliger <jdl@jdl.com>
2161 Date: Wed Jul 4 22:33:17 2007 -0500
2163 include/configs: Use new CONFIG_CMD_* in various p* named board config files.
2165 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2167 commit a5cb23092a7d31490a33d4ec871468b63babfa3c
2168 Author: Jon Loeliger <jdl@jdl.com>
2169 Date: Wed Jul 4 22:33:13 2007 -0500
2171 include/configs: Use new CONFIG_CMD_* in various o* named board config files.
2173 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2175 commit 929a2bfd142737003a8fc32e1b86e1f2c1850257
2176 Author: Jon Loeliger <jdl@jdl.com>
2177 Date: Wed Jul 4 22:33:07 2007 -0500
2179 include/configs: Use new CONFIG_CMD_* in various n* named board config files.
2181 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2183 commit 5dc11a511960d490f7f01ffd746edfe6277f99b0
2184 Author: Jon Loeliger <jdl@jdl.com>
2185 Date: Wed Jul 4 22:33:01 2007 -0500
2187 include/configs: Use new CONFIG_CMD_* in various m* named board config files.
2189 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2191 commit 9bbb1c0820c1fbd3811ab6ee4ba0f6c6f76b27e4
2192 Author: Jon Loeliger <jdl@jdl.com>
2193 Date: Wed Jul 4 22:32:57 2007 -0500
2195 include/configs: Use new CONFIG_CMD_* in various l* named board config files.
2197 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2199 commit bc234c129fa04fb9fa33530930e5cbc6084cd47a
2200 Author: Jon Loeliger <jdl@jdl.com>
2201 Date: Wed Jul 4 22:32:51 2007 -0500
2203 include/configs: Use new CONFIG_CMD_* in various j* and k* named board config files.
2205 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2207 commit 1d2c6bc491969f8d8fb34c8e30e8bea7a2af9c31
2208 Author: Jon Loeliger <jdl@jdl.com>
2209 Date: Wed Jul 4 22:32:32 2007 -0500
2211 include/configs: Use new CONFIG_CMD_* in various i* named board config files.
2213 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2215 commit 48d5d102a2f2e619c92050b9aedbb69689185bc0
2216 Author: Jon Loeliger <jdl@jdl.com>
2217 Date: Wed Jul 4 22:32:25 2007 -0500
2219 include/configs: Use new CONFIG_CMD_* in various h* named board config files.
2221 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2223 commit 72eb0efaed7048afcc61fc6f0085c49394b5dc36
2224 Author: Jon Loeliger <jdl@jdl.com>
2225 Date: Wed Jul 4 22:32:19 2007 -0500
2227 include/configs: Use new CONFIG_CMD_* in various g* named board config files.
2229 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2231 commit 1bec3d3002d3bbbae6f2468a0f7376db1120d33e
2232 Author: Jon Loeliger <jdl@jdl.com>
2233 Date: Wed Jul 4 22:32:10 2007 -0500
2235 include/configs: Use new CONFIG_CMD_* in various e* named board config files.
2237 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2239 commit ab999ba1b31ebe78dd16374394a55d7c6e5aa6e4
2240 Author: Jon Loeliger <jdl@jdl.com>
2241 Date: Wed Jul 4 22:32:03 2007 -0500
2243 include/configs: Use new CONFIG_CMD_* in various d* named board config files.
2245 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2247 commit 37e4f24b87fa255ae456d193b7cd23c18dd1d56b
2248 Author: Jon Loeliger <jdl@jdl.com>
2249 Date: Wed Jul 4 22:31:56 2007 -0500
2251 include/configs: Use new CONFIG_CMD_* in various c* named board config files.
2253 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2255 commit ba2351f9d1e841bd00ea6dad1e3c16d0259ad264
2256 Author: Jon Loeliger <jdl@jdl.com>
2257 Date: Wed Jul 4 22:31:49 2007 -0500
2259 include/configs: Use new CONFIG_CMD_* in various b* named board config files.
2261 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2263 commit 0b361c916617aff79e647b40f0e43361e0bbaccf
2264 Author: Jon Loeliger <jdl@jdl.com>
2265 Date: Wed Jul 4 22:31:42 2007 -0500
2267 include/configs: Use new CONFIG_CMD_* in various a* named board config files.
2269 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2271 commit b730cda82e362df6a22f4c59c0a9b97e885b1014
2272 Author: Jon Loeliger <jdl@jdl.com>
2273 Date: Wed Jul 4 22:31:35 2007 -0500
2275 include/configs: Use new CONFIG_CMD_* in mpc5xx board config files.
2277 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2279 commit d794cfefead5fc177cf4f41164e80382e9c9484a
2280 Author: Jon Loeliger <jdl@jdl.com>
2281 Date: Wed Jul 4 22:31:15 2007 -0500
2283 include/configs: Use new CONFIG_CMD_* in various 5200 board config files.
2285 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2287 commit ef0df52ab49eea4a30c15087fd27d54c1d946f2c
2288 Author: Jon Loeliger <jdl@jdl.com>
2289 Date: Wed Jul 4 22:31:07 2007 -0500
2291 include/configs: Use new CONFIG_CMD_* in STx board config files.
2293 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2295 commit 866e3089bfc826bb4dc74637f8aad87a3bab79fc
2296 Author: Jon Loeliger <jdl@jdl.com>
2297 Date: Wed Jul 4 22:30:58 2007 -0500
2299 include/configs: Use new CONFIG_CMD_* in sbc* board config files.
2301 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2303 commit 2694690e285acaa34922f55f4b5ae030da60c55a
2304 Author: Jon Loeliger <jdl@jdl.com>
2305 Date: Wed Jul 4 22:30:50 2007 -0500
2307 include/configs: Use new CONFIG_CMD_* in TQM board config files.
2309 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2311 commit 1cc4c458329765b58e584a19821e796b3c10e976
2312 Author: Jon Loeliger <jdl@jdl.com>
2313 Date: Wed Jul 4 22:30:28 2007 -0500
2315 include/configs: Use new CONFIG_CMD_* in 82xx board config files.
2317 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2319 commit 8ea5499afdaba0acf60923dd99001c399d4a7c8e
2320 Author: Jon Loeliger <jdl@jdl.com>
2321 Date: Wed Jul 4 22:30:06 2007 -0500
2323 include/configs: Use new CONFIG_CMD_* in 83xx board config files.
2325 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2327 commit b44896215a09c60fa40cae906f7ed207bbc2c492
2328 Author: Sergei Poselenov <sposelenov@emcraft.com>
2329 Date: Thu Jul 5 08:17:37 2007 +0200
2331 Merged POST framework with the current TOT.
2333 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
2335 commit b24629fa377214d63bb40d1360e354b6d3e4af56
2336 Author: Jon Loeliger <jdl@jdl.com>
2337 Date: Wed Jun 13 13:23:15 2007 -0500
2339 mpc86xx: Remove old CFG_CMD_* references.
2341 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2343 commit 46175d9764da129bb4fd341cd2554dc7d55f5b2a
2344 Author: Jon Loeliger <jdl@jdl.com>
2345 Date: Wed Jun 13 13:22:54 2007 -0500
2347 Add MPC8568MDS to MAKEALL 85xx target.
2349 It was missing from the original port submission.
2351 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2353 commit 2835e518c969e5124ba1174eef3e8375e12fa7d5
2354 Author: Jon Loeliger <jdl@jdl.com>
2355 Date: Wed Jun 13 13:22:08 2007 -0500
2357 include/configs: Use new CONFIG_CMD_* in 85xx board config files.
2359 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2361 commit 56b304ac2091689506088a9ae67f63fd6300cf16
2362 Author: Jon Loeliger <jdl@jdl.com>
2363 Date: Wed Jun 13 13:21:37 2007 -0500
2365 Fix #if typo in CONFIG_CMD_* changes.
2367 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2369 commit f780b83316d9af1f61d71cc88b1917b387b9b995
2370 Author: Niklaus Giger <niklausgiger@gmx.ch>
2371 Date: Wed Jun 27 18:11:38 2007 +0200
2373 resubmit: ppc4xx: Remove sequoia/sequioa.h. Cleanup ppc440.h for PPC440EPX
2375 Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
2377 commit 04e6c38b766eaa2f3287561563c9e215e0c3a0d4
2378 Author: Stefan Roese <sr@denx.de>
2379 Date: Wed Jul 4 10:06:30 2007 +0200
2381 ppc4xx: Update lwmon5 board
2383 - Add optional ECC generation routine to preserve existing
2384 RAM values. This is needed for the Linux log-buffer support
2385 - Add optional DDR2 setup with CL=4
2386 - GPIO50 not used anymore
2387 - Lime register setup added
2389 Signed-off-by: Stefan Roese <sr@denx.de>
2391 commit 6810a34677dbc446334f5e451f1682426dd33b49
2392 Author: Grant Likely <grant.likely@secretlab.ca>
2393 Date: Tue Jul 3 00:17:28 2007 -0600
2395 Fix Makefile to use $(MKCONFIG) macro for all board ports
2397 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2399 commit 90b1b2d69b9396ff2f01165ebc16c9a594eb5926
2400 Author: Grant Likely <grant.likely@secretlab.ca>
2401 Date: Tue Jul 3 00:17:28 2007 -0600
2403 Fix Makefile to use $(MKCONFIG) macro for all board ports
2405 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2407 commit 057004f4a4863554d56cc56268bfa7c7d9738e27
2408 Author: Grant Likely <grant.likely@secretlab.ca>
2409 Date: Tue Jul 3 00:34:49 2007 -0600
2411 Correct fixup relocation for mpc83xx
2413 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2415 commit 5af61b2f4b838a05f79be274f3e5a66edd2d9c96
2416 Author: Grant Likely <grant.likely@secretlab.ca>
2417 Date: Tue Jul 3 00:34:44 2007 -0600
2419 Correct fixup relocation for mpc8260
2421 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2423 commit f3a52fe05923935db86985daf9438e2f70ac39aa
2424 Author: Grant Likely <grant.likely@secretlab.ca>
2425 Date: Tue Jul 3 00:34:39 2007 -0600
2427 Correct fixup relocation for mpc824x
2429 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2431 commit a85dd254c0577fca13627c46e93fc2ad4c4f1f00
2432 Author: Grant Likely <grant.likely@secretlab.ca>
2433 Date: Tue Jul 3 00:34:34 2007 -0600
2435 Correct fixup relocation for mpc8220
2437 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2439 commit 6f7576b20ecf0d040c3ac3b032b5cbc860e38a90
2440 Author: Grant Likely <grant.likely@secretlab.ca>
2441 Date: Tue Jul 3 00:34:29 2007 -0600
2443 Correct fixup relocation for MPC5xxx
2445 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2447 commit 3649cd99ba815b6601868735765602f00ef3692b
2448 Author: Grant Likely <grant.likely@secretlab.ca>
2449 Date: Tue Jul 3 00:34:24 2007 -0600
2451 Correct relocation fixup for mpc5xx
2453 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2455 commit f82b3b6304b620ef7e28bfaa1ea887a2ad2fa325
2456 Author: Grant Likely <grant.likely@secretlab.ca>
2457 Date: Tue Jul 3 00:34:19 2007 -0600
2459 Don't set gd->reloc_off if relocation of .fixup works correctly
2461 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2463 commit e1a6144c32dc7de73bcdd33995de0148cbd0bd28
2464 Author: Grant Likely <grant.likely@secretlab.ca>
2465 Date: Tue Jul 3 00:34:14 2007 -0600
2467 Remove obsolete mpc83xx linker scripts
2469 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2471 commit 17e32fc3908bf7089d3f16fc82a1c3ae674dd65b
2472 Author: Grant Likely <grant.likely@secretlab.ca>
2473 Date: Tue Jul 3 00:34:09 2007 -0600
2475 Consolidate mpc8260 linker scripts
2477 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2479 commit af7d38b393690d7eeaf418ac85a1e831a50d5fd0
2480 Author: Grant Likely <grant.likely@secretlab.ca>
2481 Date: Tue Jul 3 00:34:04 2007 -0600
2483 Remove obsolete mpc824x linker scripts
2485 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2487 commit f94a3aecebc40ca0939c7d66d010009cf51be9e2
2488 Author: Grant Likely <grant.likely@secretlab.ca>
2489 Date: Tue Jul 3 00:33:59 2007 -0600
2491 Remove obsolete mpc824x linker scripts (3 of 4)
2493 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2495 commit a71c084f3ac7fedf144537db2b2da47323068833
2496 Author: Grant Likely <grant.likely@secretlab.ca>
2497 Date: Tue Jul 3 00:33:53 2007 -0600
2499 Remove obsolete mpc824x linker scripts (2 of 4)
2501 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2503 commit f670a15468d1365241d40022b9408e1004181f5e
2504 Author: Grant Likely <grant.likely@secretlab.ca>
2505 Date: Tue Jul 3 00:33:48 2007 -0600
2507 Remove obsolete mpc824x linker scripts (1 of 4)
2509 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2511 commit 09555bd45a04c0e54f172528d21bc18896550d28
2512 Author: Grant Likely <grant.likely@secretlab.ca>
2513 Date: Tue Jul 3 00:33:43 2007 -0600
2515 Remove obsolete mpc8220 linker scripts
2517 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2519 commit 5efb992f046e51225c93d52f80fecbe433abd789
2520 Author: Grant Likely <grant.likely@secretlab.ca>
2521 Date: Tue Jul 3 00:33:38 2007 -0600
2523 Remove obsolete mpc5xxx linker scripts (3 of 3)
2525 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2527 commit 07c13dfef65b31647e69d8b61daa1eec598add1a
2528 Author: Grant Likely <grant.likely@secretlab.ca>
2529 Date: Tue Jul 3 00:33:33 2007 -0600
2531 Remove obsolete mpc5xxx linker scripts (2 of 3)
2533 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2535 commit b4f67513a624ce85866c66c575bd2d9d7977d7f0
2536 Author: Grant Likely <grant.likely@secretlab.ca>
2537 Date: Tue Jul 3 00:33:28 2007 -0600
2539 Remove obsolete mpc5xxx linker scripts (1 of 3)
2541 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2543 commit b7d8e05f8675249b5f208aa73babeed384a4519d
2544 Author: Grant Likely <grant.likely@secretlab.ca>
2545 Date: Tue Jul 3 00:33:23 2007 -0600
2547 Remove obsolete mpc5xx linker scripts
2549 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2551 commit 416a0b6d40f6eba3a2fc547253c16bda28d922f7
2552 Author: Grant Likely <grant.likely@secretlab.ca>
2553 Date: Tue Jul 3 00:33:18 2007 -0600
2555 Consolidate mpc83xx linker scripts
2557 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2559 commit 5fc59175b92883ed5d2666a04e6bc49e70a4a365
2560 Author: Grant Likely <grant.likely@secretlab.ca>
2561 Date: Tue Jul 3 00:33:13 2007 -0600
2563 Consolidate mpc8260 linker scripts
2565 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2567 commit 737f9eb02d7335df2b3e4d7a4d3348784d1da207
2568 Author: Grant Likely <grant.likely@secretlab.ca>
2569 Date: Tue Jul 3 00:33:08 2007 -0600
2571 Consolidate mpc824x linker scripts
2573 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2575 commit 9c757b789a59a855db57b448dd825329c4e9c4a0
2576 Author: Grant Likely <grant.likely@secretlab.ca>
2577 Date: Tue Jul 3 00:33:03 2007 -0600
2579 Consolidate mpc8220 linker scripts
2581 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2583 commit d181c9a15cd41863fe24840d17848429f27d3c8c
2584 Author: Grant Likely <grant.likely@secretlab.ca>
2585 Date: Tue Jul 3 00:32:58 2007 -0600
2587 Consolidate mpc5xxx linker scripts
2589 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2591 commit 287ac924adb7291bebe5086652a362a30ab28b13
2592 Author: Grant Likely <grant.likely@secretlab.ca>
2593 Date: Tue Jul 3 00:32:53 2007 -0600
2595 Consolidate mpc5xx linker scripts
2597 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2599 commit 52b8704d0245e589f86d462e9ec25aeb7ecbbbdd
2600 Author: Wolfgang Denk <wd@denx.de>
2601 Date: Wed Jul 4 00:43:53 2007 +0200
2603 Fix a few file permission problems.
2605 Signed-off-by: Wolfgang Denk <wd@denx.de>
2607 commit 78e0cf2de7be7f1eaeeb622eb61fd50e4d5e205c
2608 Author: Wolfgang Denk <wd@denx.de>
2609 Date: Wed Jul 4 00:38:38 2007 +0200
2611 Minor coding style cleanup. Rebuild CHANGELOG file.
2613 commit 2f9c19e496acb6bb50d9299e1aab377625d48c38
2614 Author: Jon Loeliger <jdl@jdl.com>
2615 Date: Mon Jun 11 19:03:44 2007 -0500
2617 configs/ mpc86xx: Rewrite command line options using new CONFIG_CMD-* style.
2619 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2621 commit 602ad3b33d9ceef83dbab46be68646d645d637ee
2622 Author: Jon Loeliger <jdl@jdl.com>
2623 Date: Mon Jun 11 19:03:39 2007 -0500
2625 README: Rewrite command line config to use CONFIG_CMD_* names.
2627 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2629 commit 72a074cec68e5bad60d63206c050974e08afd804
2630 Author: Jon Loeliger <jdl@jdl.com>
2631 Date: Mon Jun 11 19:03:34 2007 -0500
2633 include/ non-config: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
2635 This is a compatibility step that allows both the older form
2636 and the new form to co-exist for a while until the older can
2637 be removed entirely.
2639 All transformations are of the form:
2641 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
2643 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
2645 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2647 commit 5fcf543e0b6628c76ff48705b1b0566bfd11507b
2648 Author: Jon Loeliger <jdl@jdl.com>
2649 Date: Mon Jun 11 19:03:28 2007 -0500
2651 tools/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
2653 This is a compatibility step that allows both the older form
2654 and the new form to co-exist for a while until the older can
2655 be removed entirely.
2657 All transformations are of the form:
2659 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
2661 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
2663 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2665 commit 9107ebe0d352420895ab69b715697bdebc8caf50
2666 Author: Jon Loeliger <jdl@jdl.com>
2667 Date: Mon Jun 11 19:03:23 2007 -0500
2669 board/[k-z]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
2671 This is a compatibility step that allows both the older form
2672 and the new form to co-exist for a while until the older can
2673 be removed entirely.
2675 All transformations are of the form:
2677 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
2679 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
2681 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2683 commit 5e378003d592ea828ec69d6defcd4de79096dd5c
2684 Author: Jon Loeliger <jdl@jdl.com>
2685 Date: Mon Jun 11 19:03:19 2007 -0500
2687 board/[Ma-i]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
2689 This is a compatibility step that allows both the older form
2690 and the new form to co-exist for a while until the older can
2691 be removed entirely.
2693 All transformations are of the form:
2695 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
2697 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
2699 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2701 commit 737184114ec9c9e0ab94d6713536126073bd2472
2702 Author: Jon Loeliger <jdl@jdl.com>
2703 Date: Mon Jun 11 19:03:15 2007 -0500
2705 cpu/ non-mpc*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
2707 This is a compatibility step that allows both the older form
2708 and the new form to co-exist for a while until the older can
2709 be removed entirely.
2711 All transformations are of the form:
2713 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
2715 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
2717 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2719 commit f48070fe5fe440dfb5ee5268c920de70e48ea327
2720 Author: Jon Loeliger <jdl@jdl.com>
2721 Date: Mon Jun 11 19:03:08 2007 -0500
2723 cpu/mpc*/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
2725 This is a compatibility step that allows both the older form
2726 and the new form to co-exist for a while until the older can
2727 be removed entirely.
2729 All transformations are of the form:
2731 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
2733 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
2735 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2737 commit 0c505db0a0dc1f670b13ce3b4d3fbf1ec5b3cbd2
2738 Author: Jon Loeliger <jdl@jdl.com>
2739 Date: Mon Jun 11 19:03:03 2007 -0500
2741 lib_*/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
2743 This is a compatibility step that allows both the older form
2744 and the new form to co-exist for a while until the older can
2745 be removed entirely.
2747 All transformations are of the form:
2749 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
2751 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
2753 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2755 commit 73f032021ec5f13cda8faa4e34b6de80960eb86f
2756 Author: Jon Loeliger <jdl@jdl.com>
2757 Date: Mon Jun 11 19:02:58 2007 -0500
2759 lib_ppc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
2761 This is a compatibility step that allows both the older form
2762 and the new form to co-exist for a while until the older can
2763 be removed entirely.
2765 All transformations are of the form:
2767 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
2769 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
2771 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2773 commit 98b79003c21c2578206003256de4e781d6b36ca8
2774 Author: Jon Loeliger <jdl@jdl.com>
2775 Date: Mon Jun 11 19:02:53 2007 -0500
2777 rtc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
2779 This is a compatibility step that allows both the older form
2780 and the new form to co-exist for a while until the older can
2781 be removed entirely.
2783 All transformations are of the form:
2785 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
2787 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
2789 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2791 commit 6e2115acb6a892d53a6881bf253ae41d3df39156
2792 Author: Jon Loeliger <jdl@jdl.com>
2793 Date: Mon Jun 11 19:02:49 2007 -0500
2795 net/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
2797 This is a compatibility step that allows both the older form
2798 and the new form to co-exist for a while until the older can
2799 be removed entirely.
2801 All transformations are of the form:
2803 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
2805 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
2807 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2809 commit 45cdb9b72c94655c7308b464a2666057c0b286e0
2810 Author: Jon Loeliger <jdl@jdl.com>
2811 Date: Mon Jun 11 19:02:34 2007 -0500
2813 disk/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
2815 This is a compatibility step that allows both the older form
2816 and the new form to co-exist for a while until the older can
2817 be removed entirely.
2819 All transformations are of the form:
2821 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
2823 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
2825 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2827 commit 4e109ae98294a5ca7ff848b7652c7bfd4023a94a
2828 Author: Jon Loeliger <jdl@jdl.com>
2829 Date: Mon Jun 11 19:02:20 2007 -0500
2831 fs/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
2833 This is a compatibility step that allows both the older form
2834 and the new form to co-exist for a while until the older can
2835 be removed entirely.
2837 All transformations are of the form:
2839 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
2841 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
2843 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2845 commit d5be43de93ff905c465e509d45a3164ef48d26e7
2846 Author: Jon Loeliger <jdl@jdl.com>
2847 Date: Mon Jun 11 19:02:10 2007 -0500
2849 drivers/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
2851 This is a compatibility step that allows both the older form
2852 and the new form to co-exist for a while until the older can
2853 be removed entirely.
2855 All transformations are of the form:
2857 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
2859 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
2861 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2863 commit b453960d4fdb87b3970d96119b90df2ed024fc4a
2864 Author: Jon Loeliger <jdl@jdl.com>
2865 Date: Mon Jun 11 19:02:05 2007 -0500
2867 common/ non-cmd: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
2869 This is a compatibility step that allows both the older form
2870 and the new form to co-exist for a while until the older can
2871 be removed entirely.
2873 All transformations are of the form:
2875 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
2877 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
2879 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2881 commit 65c450b47a62659d522cfa8f4fa1e4e5c60dccd0
2882 Author: Jon Loeliger <jdl@jdl.com>
2883 Date: Mon Jun 11 19:01:54 2007 -0500
2885 common/cmd_[i-z]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
2887 This is a compatibility step that allows both the older form
2888 and the new form to co-exist for a while until the older can
2889 be removed entirely.
2891 All transformations are of the form:
2893 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
2895 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
2897 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2899 commit a76adc8142c1d956385a109e0b70f9319ede4d66
2900 Author: Jon Loeliger <jdl@jdl.com>
2901 Date: Mon Jun 11 19:01:43 2007 -0500
2903 common/cmd_[a-f]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
2905 This is a compatibility step that allows both the older form
2906 and the new form to co-exist for a while until the older can
2907 be removed entirely.
2909 All transformations are of the form:
2911 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
2913 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
2915 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2917 commit ec63b10b61fd68238d4c15c1cd04c0b38228e2c1
2918 Author: Jon Loeliger <jdl@jdl.com>
2919 Date: Mon Jun 11 19:01:34 2007 -0500
2921 Introduce initial versions of new Command Config files.
2923 Derive three new files from cmd_confdefs.h:
2924 config_bootp.h - Has BOOTP related config options, not commands
2925 config_cmd_all.h - Has a CONFIG_CMD_* definition for every command
2926 config_cmd_default.h - Has a CONFIG_CMD_* definition for default cmds.
2928 For now, include "config_bootp.h" for compatability until all
2929 users of it directly include it properly.
2931 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2933 commit 1f2a05898658900dc5717761e27abf2052e67e13
2934 Author: Mushtaq Khan <mushtaqk_921@yahoo.co.in>
2935 Date: Sat Jun 30 18:50:48 2007 +0200
2939 Signed-off-by: mushtaq khan <mushtaqk_921@yahoo.co.in>
2941 commit a5d71e290f3673269be8eefb4ec44f53412f9461
2942 Author: Heiko Schocher <hs@pollux.denx.de>
2943 Date: Mon Jun 25 19:11:37 2007 +0200
2945 [PCS440EP] get rid of CONFIG_PPC4xx_USE_SPD_DDR_INIT_HANG
2947 Signed-off-by: Heiko Schocher <hs@denx.de>
2949 commit a1bd6200eccd3a02040a955d5f43d3ee1fc9f93b
2950 Author: Niklaus Giger <niklaus.giger@nestal.com>
2951 Date: Mon Jun 25 17:03:13 2007 +0200
2953 ppc4xx: PPC440EPx Emit DDR0 registers on machine check interrupt
2955 This patch prints the DDR status registers upon machine check
2956 interrupt on the 440EPx/GRx. This can be useful especially when
2957 ECC support is enabled.
2959 I added some small changes to the original patch from Niklaus to
2960 make it compile clean.
2962 Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
2963 Signed-off-by: Stefan Roese <sr@denx.de>
2965 commit 807018fb7faceb429ce0cb47baa2073746b33a4e
2966 Author: Niklaus Giger <niklaus.giger@nestal.com>
2967 Date: Mon Jun 25 16:50:55 2007 +0200
2969 ppc4xx: Fix O=buildir builds
2971 This patch fixes the problem to assemble cpu/ppc4xx/start.S
2972 experienced last week where building failed having specified
2975 Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
2977 commit 466fff1a7bb5fe764a06450626f6098219f446b8
2978 Author: Stefan Roese <sr@denx.de>
2979 Date: Mon Jun 25 15:57:39 2007 +0200
2981 ppc4xx: Add pci_pre_init() for 405 boards
2983 This patch removes the CFG_PCI_PRE_INIT option completely, since
2984 it's not needed anymore with the patch from Matthias Fuchs with
2985 the "weak" pci_pre_init() implementation.
2987 Signed-off-by: Stefan Roese <sr@denx.de>
2989 commit 6f35c53166213c24a5a0e2390ed861136ff73870
2990 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2991 Date: Sun Jun 24 17:41:21 2007 +0200
2993 ppc4xx: Maintenance patch for esd's CPCI405 derivats
2995 -add pci_pre_init() for pci interrupt fixup code
2996 -disable phy sleep mode via reset_phy() function
2997 -use correct io accessors
3000 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3002 commit 5a1c9ff0c44305b57cb4d8f9369bba90bcf0e1f8
3003 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3004 Date: Sun Jun 24 17:23:41 2007 +0200
3006 ppc4xx: Add pci_pre_init() for 405 boards
3008 This patch adds support for calling a plattform dependant
3009 pci_pre_init() function for 405 boards. This can be used to
3010 move the current pci_405gp_fixup_irq() function into the
3013 This patch also makes the CFG_PCI_PRE_INIT define obsolete.
3014 A default function with 'weak' attribute is used when
3015 a board specific pci_pre_init() is not implemented.
3017 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3019 commit 1636d1c8529c006d106287cfbc20cd0a246fe1cb
3020 Author: Wolfgang Denk <wd@denx.de>
3021 Date: Fri Jun 22 23:59:00 2007 +0200
3023 Coding stylke cleanup; rebuild CHANGELOG
3025 commit 2dc64451b4c08ffd619372abfdc2506a2e2363b9
3026 Author: Igor Lisitsin <igor@emcraft.com>
3027 Date: Wed Apr 18 14:55:19 2007 +0400
3029 Adapt log buffer code to support Linux 2.6
3031 A new environment variable, "logversion", selects the log buffer
3032 behaviour. If it is not set or set to a value other than 2, then the
3033 old, Linux 2.4.4, behaviour is selected.
3035 Signed-off-by: Igor Lisitsin <igor@emcraft.com>
3038 commit a11e06965ec91270c51853407ff1261d3c740386
3039 Author: Igor Lisitsin <igor@emcraft.com>
3040 Date: Wed Mar 28 19:06:19 2007 +0400
3042 Extend POST support for PPC440
3044 Added memory, CPU, UART, I2C and SPR POST tests for PPC440.
3046 Signed-off-by: Igor Lisitsin <igor@emcraft.com>
3049 commit 566a494f592ae3b3c0785d90d4e1ba45574880c4
3050 Author: Heiko Schocher <hs@pollux.denx.de>
3051 Date: Fri Jun 22 19:11:54 2007 +0200
3053 [PCS440EP] upgrade the PCS440EP board:
3054 - Show on the Status LEDs, some States of the board.
3055 - Get the MAC addresses from the EEProm
3057 - use the CF on the board.
3058 - check the U-Boot image in the Flash with a SHA1
3060 - use dynamic TLB entries generation for the SDRAM
3062 Signed-off-by: Heiko Schocher <hs@denx.de>
3064 commit 3a1f5c81b0b9557817a789bece839905581c2205
3065 Author: Stefan Roese <sr@denx.de>
3066 Date: Fri Jun 22 16:58:40 2007 +0200
3068 ppc4xx: Fix problem with extended program_tlb() funtion
3070 The recently extended program_tlb() function had a problem when
3071 multiple TLB's had to be setup (for example with 512MB of SDRAM). The
3072 virtual address was not incremented. This patch fixes this issue
3073 and is tested on Katmai with 512MB SDRAM.
3075 Signed-off-by: Stefan Roese <sr@denx.de>
3077 commit 02032e8f14751a1a751b09240a4f1cf9f8a2077f
3078 Author: Rafal Jaworowski <raj@semihalf.com>
3079 Date: Fri Jun 22 14:58:04 2007 +0200
3081 [ppc] Fix build breakage for all non-4xx PowerPC variants.
3083 - adapt to the more generic EXCEPTION_PROLOG and CRIT_EXCEPTION macros
3086 commit 83b4cfa3d629dff0264366263c5e94d9a50ad80b
3087 Author: Wolfgang Denk <wd@denx.de>
3088 Date: Wed Jun 20 18:14:24 2007 +0200
3090 Coding style cleanup. Refresh CHANGELOG.
3092 commit b3f9ec86e388207fd03dcdf7b145b9ed080bf024
3093 Author: Stefan Roese <sr@denx.de>
3094 Date: Tue Jun 19 17:22:44 2007 +0200
3096 ppc4xx: Add bootstrap command for AMCC Sequoia (440EPx) eval board
3098 This patch adds a board command to configure the I2C bootstrap EEPROM
3099 values. Right now 533 and 667MHz are supported for booting either via NOR
3100 or NAND FLASH. Here the usage:
3102 => bootstrap 533 nor ;to configure the board for 533MHz NOR booting
3103 => bootstrap 667 nand ;to configure the board for 667MHz NNAND booting
3105 Signed-off-by: Stefan Roese <sr@denx.de>
3107 commit df8a24cdd30151505cf57bbee5289e91bf53bd1b
3108 Author: Stefan Roese <sr@denx.de>
3109 Date: Tue Jun 19 16:42:31 2007 +0200
3111 [ppc4xx] Fix problem with NAND booting on AMCC Acadia
3113 The latest changes showed a problem with the location of the NAND-SPL
3114 image in the OCM and the init-data area (incl. cache). This patch
3117 Signed-off-by: Stefan Roese <sr@denx.de>
3119 commit 86ba99e34194394052d24c04dc40d1263d29a26f
3120 Author: Stefan Roese <sr@denx.de>
3121 Date: Tue Jun 19 16:40:58 2007 +0200
3123 [ppc4xx] Change board/amcc/acadia/cpr.c to pll.c
3125 Signed-off-by: Stefan Roese <sr@denx.de>
3127 commit e73846b7cf1e29ae635bf9bb5570269663df2ee5
3128 Author: Stefan Roese <sr@denx.de>
3129 Date: Fri Jun 15 11:33:41 2007 +0200
3131 [ppc4xx] Change lwmon5 port to work with recent 440 exception rework
3133 Now CONFIG_440 has to be defined in all PPC440 board config files.
3135 Signed-off-by: Stefan Roese <sr@denx.de>
3137 commit efa35cf12d914d4caba942acd5a6c45f217de302
3138 Author: Grzegorz Bernacki <gjb@semihalf.com>
3139 Date: Fri Jun 15 11:19:28 2007 +0200
3141 ppc4xx: Clean up 440 exceptions handling
3143 - Introduced dedicated switches for building 440 and 405 images required
3144 for 440-specific machine instructions like 'rfmci' etc.
3146 - Exception vectors moved to the proper location (_start moved away from
3147 the critical exception handler space, which it occupied)
3149 - CriticalInput now serviced (with default handler)
3151 - MachineCheck properly serviced (added a dedicated handler and return
3154 - Overall cleanup of exceptions declared with STD_EXCEPTION macro (unused,
3155 unhandled and those not relevant for 4xx were eliminated)
3157 - Eliminated Linux leftovers, removed dead code
3159 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
3160 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
3161 Signed-off-by: Stefan Roese <sr@denx.de>
3163 commit b765ffb773f5a3cd5aa94ec76b6a05276b8cd5b2
3164 Author: Stefan Roese <sr@denx.de>
3165 Date: Fri Jun 15 08:18:01 2007 +0200
3167 [ppc4xx] Add initial lwmon5 board support
3169 This patch adds initial support for the Liebherr lwmon5 board euqipped
3170 with an AMCC 440EPx PowerPC.
3172 Signed-off-by: Stefan Roese <sr@denx.de>
3174 commit 85f737376d5ff3d5f0d45a8b657686326d175307
3175 Author: Stefan Roese <sr@denx.de>
3176 Date: Fri Jun 15 07:39:43 2007 +0200
3178 [ppc4xx] Extend 44x GPIO setup with default output state
3180 The board config array CFG_440_GPIO_TABLE for the ppc440 GPIO setup
3181 is extended with the default GPIO output state (level).
3183 Signed-off-by: Stefan Roese <sr@denx.de>
3185 commit dbca208518e5e7f01a6420588d1cd6e60db74c2b
3186 Author: Stefan Roese <sr@denx.de>
3187 Date: Thu Jun 14 11:14:32 2007 +0200
3189 [ppc4xx] Extend program_tlb() with virtual & physical addresses
3191 Now program_tlb() allows to program a TLB (or multiple) with
3192 different virtual and physical addresses. With this change, now one
3193 physical region (e.g. SDRAM) can be mapped 2 times, once with caches
3194 diabled and once with caches enabled.
3196 Signed-off-by: Stefan Roese <sr@denx.de>
3198 commit 9912121f7ed804ea58fd62f3f230b5dcfc357d88
3199 Author: Detlev Zundel <dzu@denx.de>
3200 Date: Wed May 23 19:02:41 2007 +0200
3202 Change 'repeatable' attribute of some commands to sensible values.
3204 Most prominently this changes 'erase' to be non-repeatable.
3206 Signed-off-by: Detlev Zundel <dzu@denx.de>
3208 commit 5afb202093f6a001797db92cf695b93a70ea9ab4
3209 Author: Detlev Zundel <dzu@denx.de>
3210 Date: Wed May 23 18:47:48 2007 +0200
3212 Fix 'run' not to continue after interrupted command
3214 Signed-off-by: Detlev Zundel <dzu@denx.de>
3216 commit 9b7464a2c88614e1061f509c48930a3d240d1a35
3217 Author: Jason Jin <Jason.jin@freescale.com>
3218 Date: Mon Jun 11 15:14:24 2007 +0200
3220 USB: This patch fix readl in ohci swap reg access.
3222 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
3224 commit 8f8416fada9faf94b9a92f21fe6000643cb521d5
3225 Author: Bartlomiej Sieka <tur@semihalf.com>
3226 Date: Fri Jun 8 14:52:22 2007 +0200
3228 TQM5200: Add Flat Device Tree support, update default env. accordingly.
3230 Signed-off-by: Jan Wrobel <wrr@semihalf.com>
3231 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
3233 commit 9045f33c023f698660a2e45d1b2194c0711abebc
3234 Author: Wolfgang Denk <wd@denx.de>
3235 Date: Fri Jun 8 10:24:58 2007 +0200
3237 Fix config problems on SC3 board; make ide_reset_timeout work.
3239 commit fba3fb0449b8a54542aed1e729de76e7f5a2ff1b
3240 Author: Benoît Monin <bmonin@adeneo.eu>
3241 Date: Fri Jun 8 09:55:24 2007 +0200
3243 [PATCH] fix gpio setting when using CFG_440_GPIO_TABLE
3245 Set the correct value in GPIOx_TCR when configuring the gpio
3246 with CFG_440_GPIO_TABLE.
3248 Signed-off-by: Benoit Monin <bmonin@adeneo.eu>
3249 Signed-off-by: Stefan Roese <sr@denx.de>
3251 commit f539edc076cfe52bff919dd512ba8d7af0e22092
3252 Author: Vadim Bendebury <vbendeb@google.com>
3253 Date: Thu May 24 15:52:25 2007 -0700
3255 cosmetic changes to bcm570x driver
3257 This is a cosmetic only changes submission.
3258 It affects files relevant to bcm570x driver.
3259 the commands used to generate this change was
3262 Lindent -pcs -l80 bcm570x.c bcm570x_lm.h bcm570x_mm.h tigon3.c tigon3.h
3264 The BMW target (the only one using this chip so far) builds cleanly, the
3265 `before and after' generated object files for drivers/bcm570x.c and
3266 drivers/tigon3.o are identical as reported by objdump -d
3268 Signed-off-by: Vadim Bendebury <vbendeb@google.com>
3269 Signed-off-by: Ben Warren <bwarren@qstreams.com>
3271 commit 725671ccd2cd04c9ebc50c9e5a94dd8cbade66b7
3272 Author: Wolfgang Denk <wd@denx.de>
3273 Date: Wed Jun 6 16:26:56 2007 +0200
3275 Coding Style cleanup; generate new CHANGELOG file.
3277 Signed-off-by: Wolfgang Denk <wd@denx.de>
3279 commit 19d763c35e0b5568eaf0b8adbf7a68ccfe7fa243
3280 Author: Markus Klotzbuecher <mk@denx.de>
3281 Date: Wed Jun 6 11:49:44 2007 +0200
3283 TRAB, USB: update trab board configuration for use of generic ohci driver
3285 commit dace45acd1c1357daa9322099d07c9a9e08b0024
3286 Author: Markus Klotzbuecher <mk@denx.de>
3287 Date: Wed Jun 6 11:49:43 2007 +0200
3289 USB: ohci fixes and cleanup for ppc4xx and yosemite board.
3291 commit 72657570b61635c74fa0c3f0e9e7d0671a9d08df
3292 Author: Markus Klotzbuecher <mk@denx.de>
3293 Date: Wed Jun 6 11:49:43 2007 +0200
3295 USB: ohci fixes and cleanup for mpc5xxx and IceCube board config
3297 commit fc43be478f2aa37ce38acd85355038866e4162af
3298 Author: Markus Klotzbuecher <mk@denx.de>
3299 Date: Wed Jun 6 11:49:35 2007 +0200
3301 USB/OHCI: endianness cleanup in the generic ohci driver
3303 commit c440bfe6d6d92d66478a7e84402b31f48413617b
3304 Author: Stefan Roese <sr@denx.de>
3305 Date: Wed Jun 6 11:42:13 2007 +0200
3307 ppc4xx: Add NAND booting support for AMCC Acadia (405EZ) eval board
3309 This patch adds NAND booting support for the AMCC Acadia eval board.
3311 Please make sure to configure jumper J7 to position 2-3 when booting
3312 from NOR, and to position 1-2 when booting for NAND.
3314 I also added a board command to configure the I2C bootstrap EEPROM
3315 values. Right now only 267MHz is support for booting either via NOR
3316 or NAND FLASH. Here the usage:
3318 => bootstrap 267 nor ;to configure the board for 267MHz NOR booting
3319 => bootstrap 267 nand ;to configure the board for 267MHz NNAND booting
3321 Signed-off-by: Stefan Roese <sr@denx.de>
3323 commit 18135125f909948b85d1d6881ab4ac0efb4a1c58
3324 Author: Rodolfo Giometti <giometti@linux.it>
3325 Date: Wed Jun 6 10:08:14 2007 +0200
3327 Files include/linux/byteorder/{big,little}_endian.h define
3328 __BIG_ENDIAN and __LITTLE_ENDIAN.
3330 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
3332 commit a81d1c0b85b13e9d45f2d87de96a51a6e0ef0f82
3333 Author: Zhang Wei <wei.zhang@freescale.com>
3334 Date: Wed Jun 6 10:08:14 2007 +0200
3336 Add USB PCI-OHCI, USB keyboard and event poll support to the
3337 MPC8641HPCN board config file.
3339 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
3341 commit 4dae14ce8fbdf380017dc54f172218e7d2acc889
3342 Author: Zhang Wei <wei.zhang@freescale.com>
3343 Date: Wed Jun 6 10:08:14 2007 +0200
3345 USB PCI-OHCI, interrupt pipe and usb event poll support
3347 This patch added USB PCI-OHCI chips support, interrupt pipe support
3348 and usb event poll support. For supporting the USB interrupt pipe, the
3349 globe urb_priv is moved to purb in ed struct. Now, we can process
3350 several urbs at one time. The interrupt pipe support codes are ported
3351 from Linux kernel 2.4.
3353 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
3355 commit fdcfaa1b02268b2899e374b35adf936c911a47eb
3356 Author: Zhang Wei <wei.zhang@freescale.com>
3357 Date: Wed Jun 6 10:08:13 2007 +0200
3359 USB event poll support
3361 This patch adds USB event poll support, which could be used in usbkbd
3362 and other usb devices driver when the asynchronous interrupt
3363 processing is supported.
3365 Signed-off-by: Zhang Wei <wei.zhang@freescale.com
3367 commit 9a1d00fa47c1e05e3fdb60b33213af4e18d4c18e
3368 Author: Rodolfo Giometti <giometti@linux.it>
3369 Date: Wed Jun 6 10:08:12 2007 +0200
3371 ISP116x: delay for crappy USB keys
3373 Using some (very) slow USB keys cause the USB host controller buffers
3374 are not ready to be read by the CPU so we need an extra delay before
3375 reading the USB storage data.
3377 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
3379 commit 09444143670c9c2243cb7aba9f70b3713d33bed1
3380 Author: Markus Klotzbuecher <mk@denx.de>
3381 Date: Wed Jun 6 10:08:12 2007 +0200
3383 Change duplicate usb_cpu_init_fail to usb_board_init_fail
3385 Thanks to Liew Tsi Chung <Tsi-chung.Liew@freescale.com> for pointing
3388 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
3390 commit 32922cdc470fdfd39bea0c1c4f582d3fb340421e
3391 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
3392 Date: Tue Jun 5 12:30:52 2007 -0500
3394 mpc8641 image size cleanup
3396 e600 does not have a bootpg restriction.
3397 Move the version string to beginning of image at fff00000.
3398 Resetvec.S is not needed.
3399 Update flash copy instructions.
3400 Add tftpflash env variable
3402 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
3403 Signed-off-by: Jon Loeliger <jdl@freescale.com>
3405 commit e3cbe1f93c5722f8ebbad468e30c069a2b511097
3406 Author: Benoît Monin <bmonin@adeneo.eu>
3407 Date: Mon Jun 4 08:36:05 2007 +0200
3409 [PATCH] Fix ppc4xx bootstrap letter displayed on startup
3411 The attached patch is mainly cosmetic, allowing u-boot to
3412 display the correct bootstrap option letter according to the
3415 The original patch was extended with 405EZ support by Stefan
3418 Signed-off-by: Benoit Monin <bmonin@adeneo.eu>
3419 Signed-off-by: Stefan Roese <sr@denx.de>
3421 commit 5b1313fb2758ffce8b624457f777d8cc6709608d
3422 Author: Nikita V. Youshchenko <yoush@debian.org>
3423 Date: Wed May 23 12:45:19 2007 +0400
3425 fix compilation problem for mpc8349itx CFG_RAMBOOT
3427 Current include/configs/MPC8349ITX.h does contain some support for building
3428 image that will be started from memory (without putting in into flash).
3429 It could be triggered by building with TEXT_BASE set to a low value.
3431 However, this support is incomplete: using of low TEXT_BASE causes
3432 defining configuration macros in inconsistent way, which later leads
3433 to compilation errors. In particular. flash support is being disabled,
3434 but then flash structures get referenced.
3436 This patch fixes this, making it possible to build with low TEXT_BASE.
3438 Signed-Off-By: Nikita Youshchenko <yoush@debian.org>
3440 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3442 commit 8a364f0970de49949d635e60accf463c6443ef8c
3443 Author: Nikita V. Youshchenko <yoush@debian.org>
3444 Date: Wed May 23 12:45:25 2007 +0400
3446 add missing 'console' var to default mpc8349itx config
3448 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3450 commit 18d156eb37c90fadc8ec7a81a3b89176161f85b7
3451 Author: Stefan Roese <sr@denx.de>
3452 Date: Fri Jun 1 16:18:17 2007 +0200
3454 ppc4xx: Add missing file for Bamboo NAND booting support
3456 Signed-off-by: Stefan Roese <sr@denx.de>
3458 commit 155a96478a0881e6da96cbbbcf34952d6a3b1b4b
3459 Author: Stefan Roese <sr@denx.de>
3460 Date: Fri Jun 1 15:58:19 2007 +0200
3462 ppc4xx: Undo Sequoia patch for dynamic EBC speed support of 83MHz
3464 This patch undoes the patch by Jeff Mann with commit-id ada4697d. As
3465 suggested by AMCC it is not recommended to dynamically change the EBC
3466 speed after bootup. So we undo this change to be on the safe side.
3468 Signed-off-by: Stefan Roese <sr@denx.de>
3470 commit 9d9096043e8f713d4bf1743d32e1459e6a11644b
3471 Author: Stefan Roese <sr@denx.de>
3472 Date: Fri Jun 1 15:29:04 2007 +0200
3474 ppc4xx: Update Sequoia NAND booting support with ECC
3476 Signed-off-by: Stefan Roese <sr@denx.de>
3478 commit cf959c7d6687567c308e366e9581e1a5aff5cc5b
3479 Author: Stefan Roese <sr@denx.de>
3480 Date: Fri Jun 1 15:27:11 2007 +0200
3482 ppc4xx: Add NAND booting support for AMCC Bamboo (440EP) eval board
3484 This patch adds NAND booting support for the AMCC Bamboo eval board.
3485 Since the NAND-SPL boot image is limited to 4kbytes, this version
3486 only supports the onboard 64MBytes of DDR. The DIMM modules can't be
3487 supported, since the setup code for I2C DIMM autodetection and
3488 configuration is too big for this NAND bootloader.
3490 Signed-off-by: Stefan Roese <sr@denx.de>
3492 commit 42be56f53c8b107868e6125c8524ae84293e95a7
3493 Author: Stefan Roese <sr@denx.de>
3494 Date: Fri Jun 1 15:23:04 2007 +0200
3496 NAND: Add ECC support to NAND booting support in nand_spl/nand_boot.c
3498 The U-Boot NAND booting support is now extended to support ECC
3499 upon loading of the NAND U-Boot image.
3501 Tested on AMCC Sequoia (440EPx) and Bamboo (440EP).
3503 Signed-off-by: Stefan Roese <sr@denx.de>
3505 commit a471db07fbb65a841ffc9f4f112562b945230f98
3506 Author: Stefan Roese <sr@denx.de>
3507 Date: Fri Jun 1 15:19:29 2007 +0200
3509 ppc4xx: Prepare Bamboo port for NAND booting support
3511 This patch updates the "normal" Bamboo NOR booting port, so
3512 that it is compatible with the coming soon NAND booting
3515 It also enables the 2nd NAND flash on the Bamboo.
3517 Signed-off-by: Stefan Roese <sr@denx.de>
3519 commit 53ad02103fb8be4138a9937a8ab91fcdff7b4987
3520 Author: Stefan Roese <sr@denx.de>
3521 Date: Fri Jun 1 15:16:58 2007 +0200
3523 ppc4xx: Update in_be32() functions and friends to latest Linux version
3525 Signed-off-by: Stefan Roese <sr@denx.de>
3527 commit 91da09cfbce0c1de05d6d84aa8363d666fa7ea3c
3528 Author: Stefan Roese <sr@denx.de>
3529 Date: Fri Jun 1 15:15:12 2007 +0200
3531 NAND: Add hardware ECC support to the PPC4xx NAND driver ndfc.c
3533 This patch adds hardware ECC support to the NDFC driver. It also
3534 changes the register access from using the "simple" in32/out32
3535 functions to the in_be32/out_be32 functions, which make sure
3536 that the access is correctly synced. This is the only recommended
3537 access to SoC registers in the current Linux kernel.
3539 Signed-off-by: Stefan Roese <sr@denx.de>
3541 commit 17b5e862287cca76f19dcf8b741e61a7d06617f2
3542 Author: Stefan Roese <sr@denx.de>
3543 Date: Fri Jun 1 15:12:15 2007 +0200
3545 NAND: Update nand_ecc.c to latest Linux version
3547 This patch updates the nand_ecc code to the latest Linux version.
3548 The main reason for this is the more compact code. This makes
3549 it possible to include the ECC code into the NAND bootloader
3550 image (NAND_SPL) for PPC4xx.
3552 Signed-off-by: Stefan Roese <sr@denx.de>
3554 commit d2d432760d2199d0e8558fdd9d1789b8131abcf7
3555 Author: Stefan Roese <sr@denx.de>
3556 Date: Fri Jun 1 15:09:50 2007 +0200
3558 ppc4xx: 44x DDR driver code cleanup and small fix for Bamboo
3560 Signed-off-by: Stefan Roese <sr@denx.de>
3562 commit e4bbed2803a2ad0521c7362f5d3e065f99abaedc
3563 Author: Stefan Roese <sr@denx.de>
3564 Date: Fri Jun 1 13:45:24 2007 +0200
3566 ppc4xx: Change Luan config file to support ECC
3568 With the updated 44x DDR2 driver the Luan board now supports
3569 ECC generation and checking.
3571 Signed-off-by: Stefan Roese <sr@denx.de>
3573 commit 7187db73491c8de0fb56efb5e5134ba5ec443089
3574 Author: Stefan Roese <sr@denx.de>
3575 Date: Fri Jun 1 13:45:00 2007 +0200
3577 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
3579 Add config option for 180 degree advance clock control as needed
3580 for the AMCC Luan eval board.
3582 Signed-off-by: Stefan Roese <sr@denx.de>
3584 commit ee1529838abbfaa35f14e3ffbeaaba693159475f
3585 Author: Wolfgang Denk <wd@denx.de>
3586 Date: Thu May 31 17:20:09 2007 +0200
3588 Add support for STX GP3SSA (stxssa) Board with 4 MiB flash.
3590 Signed-off-by: Wolfgang Denk <wd@denx.de>
3592 commit 7049288fb1f16f1b317140226cdebd07bd416395
3593 Author: Bartlomiej Sieka <tur@semihalf.com>
3594 Date: Sun May 27 17:26:46 2007 +0200
3596 Motion-PRO: Code cleanup, fix of a typo in OF_STDOUT_PATH.
3598 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
3600 commit 4520fd4d2c450da49637216aa0e53739b61c60ac
3601 Author: Bartlomiej Sieka <tur@semihalf.com>
3602 Date: Sun May 27 17:06:36 2007 +0200
3604 Motion-PRO: Add support for redundant environment.
3606 Enable redundant environment, add a MTD partition for it; also add env.
3607 variable command for passing MTD partitions to the kernel command line.
3609 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
3610 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
3612 commit a26eabeec31746f06d309103690892805696e344
3613 Author: Bartlomiej Sieka <tur@semihalf.com>
3614 Date: Sun May 27 17:05:11 2007 +0200
3616 Motion-PRO: Change maximum console buffer size from 256 to 1024 bytes.
3618 Allow passing longer command line to the kernel - useful especially
3619 for passing MTD partition layout.
3621 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
3622 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
3624 commit 9160b96f71483a116de81c68985e8ee306d36764
3625 Author: Bartlomiej Sieka <tur@semihalf.com>
3626 Date: Sun May 27 17:04:18 2007 +0200
3628 Fix: Add missing NULL termination in strings expanded by macros parser.
3630 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
3631 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
3633 commit 630ec84aef7228fc1dbfb38dec78541403a786cd
3634 Author: Bartlomiej Sieka <tur@semihalf.com>
3635 Date: Sun May 27 17:03:37 2007 +0200
3637 Motion-PRO: Update EEPROM's page write bits and write delay.
3639 Change EEPROM configuration according to the datasheet: "The 24C01A and 24C02A
3640 have a page write capability of two bytes", and "This device offers fast (1ms)
3641 byte write". Add 3ms of extra delay.
3643 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
3644 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
3646 commit c00125e07c1ebc125bab40e1e18bceed8be0c162
3647 Author: Bartlomiej Sieka <tur@semihalf.com>
3648 Date: Sun May 27 16:58:45 2007 +0200
3650 MPC5XXX, Motion-PRO: Fix PHY initialization problem.
3652 After being reset in mpc5xxx_fec_init_phy(), PHY goes into FX mode, in which
3653 networking does not function. This commit switches PHY to TX mode by clearing
3654 the FX_SEL bit of Mode Control Register. It also reverses commit
3655 008861a2f3ef2c062744d733787c7e530a1b8761, i.e., a temporary workaround.
3657 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
3658 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
3660 commit 93b78f534a6e708b4cf1a4ffb4d8438c67a007db
3661 Author: Bartlomiej Sieka <tur@semihalf.com>
3662 Date: Sun May 27 16:57:15 2007 +0200
3664 Motion-PRO: Add support for the temperature sensor.
3666 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
3667 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
3669 commit c75e639630cc132dc19cd1ecda5922c0db0bfbba
3670 Author: Bartlomiej Sieka <tur@semihalf.com>
3671 Date: Sun May 27 16:55:23 2007 +0200
3673 Motion-PRO: Add displaying of CPLD revision information during boot.
3675 Signed-off-by: Jan Wrobel <wrr@semihalf.com>
3676 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
3678 commit c99512d6bd3973f01ca2fc4896d829b46e68f150
3679 Author: Bartlomiej Sieka <tur@semihalf.com>
3680 Date: Sun May 27 16:53:43 2007 +0200
3682 MPC5xxx: Change names of defines related to IPB and PCI clocks.
3684 Both CFG_PCISPEED_66 and CFG_IPBSPEED_133 are misnamed, as defining
3685 them does not cause PCI or IPB clocks to run at the specified speed.
3686 Instead, they configure divisors used to calculate said clocks. This
3687 patch renames the defines according to their real function.
3689 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
3690 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
3692 commit a11c0b85dc3664bb3c1e781137118730c8f619ab
3693 Author: Bartlomiej Sieka <tur@semihalf.com>
3694 Date: Sun May 27 16:51:48 2007 +0200
3696 Motion-PRO: Add LED support.
3698 Signed-off-by: Jan Wrobel <wrr@semihalf.com>
3699 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
3700 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
3702 commit d756894722c888d09a9fa1df8323753772d3dcce
3703 Author: Stefan Roese <sr@denx.de>
3704 Date: Thu May 24 09:49:00 2007 +0200
3706 ppc4xx: Fix small 405EZ OCM initilization bug in start.S
3708 As pointed out by Bruce Adler <bruce.adler@acm.org> this patch
3709 fixes a small bug in the 405EZ OCM initialization. Thanks for
3712 Signed-off-by: Stefan Roese <sr@denx.de>
3714 commit 5d4a179013d59a76446462e1eb0a969fba63eb81
3715 Author: Stefan Roese <sr@denx.de>
3716 Date: Thu May 24 08:22:09 2007 +0200
3718 ppc4xx: Update AMCC Acadia support for board revision 1.1
3720 This patch updates the Acadia (405EZ) support for the new 1.1 board
3721 revision. It also adds support for NAND FLASH via the 4xx NDFC.
3723 Please note that the jumper J7 must be in position 2-3 for this
3724 NAND support. Position 1-2 is for NAND booting only. NAND booting
3725 support will follow later.
3727 Signed-off-by: Stefan Roese <sr@denx.de>
3729 commit 822d55365bb557e084d0e33625a6dedcc866110b
3730 Author: Jon Loeliger <jdl@freescale.com>
3731 Date: Wed May 23 14:09:46 2007 -0500
3733 Add LIST_86xx MAKEALL target for PowerPC builds.
3735 Signed-off-by: Jon Loeliger <jdl@freescale.com>
3737 commit 9f0077abd69f7a7c756a915b961037302be3e6f2
3738 Author: Stefan Roese <sr@denx.de>
3739 Date: Tue May 22 12:48:09 2007 +0200
3741 ppc4xx: Use do { ... } while (0) for CPR & SDR access macros
3743 Signed-off-by: Stefan Roese <sr@denx.de>
3745 commit 6f3dfc139a838b0841c151efe00ad47db2366e79
3746 Author: Stefan Roese <sr@denx.de>
3747 Date: Tue May 22 12:46:10 2007 +0200
3749 ppc4xx: Add 405 support to 4xx NAND driver ndfc.c
3751 This patch adds support for 405 PPC's to the 4xx NAND driver
3752 ndfc.c. This is in preparation for the new AMCC 405EZ.
3754 Signed-off-by: Stefan Roese <sr@denx.de>
3756 commit 10603d76767426be803dadd4fb688b97eb69481c
3757 Author: Stefan Roese <sr@denx.de>
3758 Date: Mon May 21 07:41:22 2007 +0200
3760 ppc4xx: Fix problem in 405EZ OCM initialization
3762 As spotted by Bruce Adler this patch fixes an initialization problem
3765 Signed-off-by: Stefan Roese <sr@denx.de>
3767 commit 3e3b956906eba9e4ad7931581ecedaad10eccce8
3768 Author: Peter Pearse <peter.pearse@arm.com>
3769 Date: Fri May 18 16:47:03 2007 +0100
3771 Reduce line lengths to 80 characters max.
3773 commit 93ef45c9ddfdd9fc17c4e74bd8e2f2456580eb72
3774 Author: Peter Pearse <peter.pearse@arm.com>
3775 Date: Fri May 18 14:34:07 2007 +0100
3777 Makefile permissions
3779 commit 1443a31457d68f7e8f0b9403e9832ec1e79dc59d
3780 Author: Peter Pearse <peter.pearse@arm.com>
3781 Date: Fri May 18 14:33:11 2007 +0100
3783 Makefile permissions
3785 commit 255a3577c848706441daee0174543efe205a77f8
3786 Author: Kim Phillips <kim.phillips@freescale.com>
3787 Date: Wed May 16 16:52:19 2007 -0500
3789 Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx
3791 For all practical u-boot purposes, TSECs don't differ throughout the
3792 mpc8[356]xx families; reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx.
3794 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3796 commit 70124c2602ae2d4c5d3dba05b482d91548242de8
3797 Author: Stefano Babic <sbabic@denx.de>
3798 Date: Wed May 16 14:49:12 2007 +0200
3800 Fix compile problem cause my Microblaze merge
3802 Signed-off-by: Stefano Babic <sbabic@denx.de>
3804 commit ada4697d0230d6da552867777f98a67ec3ba2579
3805 Author: Jeffrey Mann <mannj@embeddedplanet.com>
3806 Date: Wed May 16 13:23:10 2007 +0200
3808 [PATCH] Run new sequoia boards with an EBC speed of 83MHz
3810 Because the Sequoia board does not boot with an EBC faster than 66MHz,
3811 the clock divider are changed after the initial boot process.
3813 This allows for maximum clocking speeds to be achieved on newer boards.
3814 Sequoia boards with 666.66 MHz processors require that the EBC divider
3815 be set to 3 in order to start the initial boot process at a slower EBC
3816 speed. After the initial boot process, the divider can be set back to 2,
3817 which will cause the boards to run at 83.333MHz. This is backward
3818 compatible with boards with 533.33 MHz processors, as these boards will
3819 already be set with an EBC divider of 2.
3821 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
3823 commit a7676ea7732f3c596805079fed7e5c9fac652cfc
3824 Author: Wolfgang Denk <wd@denx.de>
3825 Date: Wed May 16 01:16:53 2007 +0200
3827 Minor Coding Style cleanup, update CHANGELOG.
3829 Signed-off-by: Wolfgang Denk <wd@denx.de>
3831 commit d62f64cc23a940eafe712c776b3249e4160753d1
3832 Author: Wolfgang Denk <wd@denx.de>
3833 Date: Wed May 16 00:13:33 2007 +0200
3835 Coding Style Cleanup, new CHANGELOG
3837 commit 3162eb836903c8b247fdc7470dd39bfa6996f495
3838 Author: Wolfgang Denk <wd@denx.de>
3839 Date: Tue May 15 23:38:05 2007 +0200
3841 Minor coding style cleanup.
3843 commit 66d9dbec1cc27d6398ee6cf84639dbe14971251e
3844 Author: mushtaq khan <mushtaq_k@procsys.com>
3845 Date: Fri Apr 20 14:23:02 2007 +0530
3847 Add driver for S-ATA-controller on Intel processors with South
3848 Bridge, ICH-5, ICH-6 and ICH-7.
3852 1. Code is divided in to two files. All functions, which are
3853 controller specific are kept in "drivers/ata_piix.c" file and
3854 functions, which are not controller specific, are kept in
3855 "common/cmd_sata.c" file.
3857 2. Reading and Writing from the S-ATA drive is done using PIO method.
3859 3. Driver can be configured for 48-bit addressing by defining macro
3860 CONFIG_LBA48, if this macro is not defined driver uses the 28-bit
3863 4. S-ATA read function is hooked to the File system, commands like
3864 ext2ls and ext2load file can be used. This has been tested.
3866 5. U-Boot command "SATA_init" is added, which initializes the S-ATA
3867 controller and identifies the S-ATA drives connected to it.
3869 6. U-Boot command "sata" is added, which is used to read/write, print
3870 partition table and get info about the drives present. This I have
3871 implemented in same way as "ide" command is implemented in U-Boot.
3873 7. This driver is for S-ATA in native mode.
3875 8. This driver does not support the Native command queuing and
3878 Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com>
3880 commit 644e6fb4eb8be90ea04ba34b643a8bf019d680e0
3881 Author: mushtaq khan <mushtaq_k@procsys.com>
3882 Date: Mon Apr 30 15:57:22 2007 +0530
3884 Fixes bug clearing the bss section for i386
3887 There is a bug in the code of clearing the bss section for processor
3888 i386.(File: cpu/i386/start.S)
3889 In the code, bss_start addr (starting addr of bss section) is put into
3890 the register %eax, but the code which clears the bss section refers to
3891 the addr pointed by %edi.
3893 This patch fixes this bug by putting bss_start into %edi register.
3895 Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com>
3897 commit c3243cf7b490057277d61acffe4ad0946f9eb4a4
3898 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
3899 Date: Mon Apr 30 16:47:28 2007 -0500
3901 Add support for BCM5464 Quad Phy
3903 Added support for Broadcom's BCM5464 Quad Phy
3905 Signed-off-by: Joe Hamman <joe.hamman@embeddedspecialties.com>
3907 commit 1b305bdc754c8468e1d5d858f5dcf8a7a0a4bb7a
3908 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
3909 Date: Wed May 9 08:10:57 2007 +0800
3911 Search the exception table with linear algorithm
3913 Search the exception table with linear algorithm instead of
3914 bisecting algorithm.
3915 Because the exception table might be unsorted.
3917 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
3919 commit 5dfaa50eb819686bfba1927e8c5b8a70a4d65fd3
3920 Author: Aubrey.Li <aubrey.adi@gmail.com>
3921 Date: Mon May 14 11:47:35 2007 +0800
3923 Fix compilation issues on MACOSX
3925 Singed-off-by: Marc Hoffman <Marc.Hoffman@analog.com>
3926 Signed-off-by: Aubrey Li <aubrey.adi@gmail.com>
3928 commit 56fd7162985c412317bbf763a225fba23c64fd31
3929 Author: Stephen Williams <steve@icarus.com>
3930 Date: Tue May 15 07:55:42 2007 -0700
3932 Fix for compile of JSE target
3934 The attached patch fixes the compile of the JSE board in the
3935 denx git as of 14 may 2007. It is an extremely simple patch,
3936 it just adds the missing define of CFG_SYSTEMACE_WIDTH.
3938 Fix to compile JSE against 20070514 git of u-boot
3940 commit 61936667e86a250ae12fd2dc189d3588f0a59e0b
3941 Author: Stefan Roese <sr@denx.de>
3942 Date: Fri May 11 12:01:49 2007 +0200
3944 ppc4xx: Add mtcpr/mfcpr access macros
3946 Signed-off-by: Stefan Roese <sr@denx.de>
3948 commit 343c48bd84606c4025c8a7c7263fda465d6e284c
3949 Author: Stefan Roese <sr@denx.de>
3950 Date: Fri May 11 12:01:06 2007 +0200
3952 ppc4xx: Set bd->bi_pci_busfreq on 440EPx/GRx too
3954 Signed-off-by: Stefan Roese <sr@denx.de>
3956 commit 7d98ba770a7eaefa29ce927f31a0956df85bf650
3957 Author: Piotr Kruszynski <ppk@semihalf.com>
3958 Date: Thu May 10 16:55:52 2007 +0200
3960 [Motion-PRO] Add MTD and JFFS2 support, also add default partition
3963 commit 65fb6a676e821f9570a2a376dc204bf611ce5f81
3964 Author: Peter Pearse <peter.pearse@arm.com>
3965 Date: Wed May 9 11:42:44 2007 +0100
3967 Add the board directory for SMN42
3969 commit 160131bf965785419626df6c388729fe0b597992
3970 Author: Peter Pearse <peter.pearse@arm.com>
3971 Date: Wed May 9 11:41:58 2007 +0100
3973 Add the files for the SMN42 board
3975 commit 5c6d2b5a500f8c49670de8910150b78a41f781fc
3976 Author: Peter Pearse <peter.pearse@arm.com>
3977 Date: Wed May 9 11:40:34 2007 +0100
3979 Remove the deleted files for the SMN42 patch
3981 commit b0d8f5bf0d215adc9424cb228b2484dbf07f7761
3982 Author: Peter Pearse <peter.pearse@arm.com>
3983 Date: Wed May 9 11:37:56 2007 +0100
3985 New board SMN42 branch
3987 commit 29f3be0caf0799ca6b89dfd9824c15619a50000f
3988 Author: Peter Pearse <peter.pearse@arm.com>
3989 Date: Wed May 9 10:24:38 2007 +0100
3991 Makefile permissions
3993 commit b84289b595731e8851df46e893845cc1322c9b9b
3994 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
3995 Date: Tue May 8 14:17:07 2007 -0500
3997 8641hpcn: Fix Makefile after moving pixis to board/freescale.
3999 The OBJTREE != SRCTREE build scenario was broken.
4002 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
4003 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4005 commit e69f66c6ebe82bbbd1da766bc4eda40ec7ee5af1
4006 Author: Michal Simek <monstr@monstr.eu>
4007 Date: Tue May 8 15:57:43 2007 +0200
4009 add: reading special purpose registers
4011 commit 1a50f164beb065f360fbddb76029607d6b099698
4012 Author: Michal Simek <monstr@monstr.eu>
4013 Date: Tue May 8 14:52:52 2007 +0200
4015 add: Microblaze V5 exception handling
4017 commit ab874d5047e5d30dbc1e517ff26083efffa98ecb
4018 Author: Michal Simek <monstr@monstr.eu>
4019 Date: Tue May 8 14:39:11 2007 +0200
4021 add: FSL control read and write
4023 commit de1de02a7cbf05e6b63e0d8ffc624f12493f6ba3
4024 Author: Piotr Kruszynski <ppk@semihalf.com>
4025 Date: Tue May 8 13:05:44 2007 +0200
4027 [Motion-PRO] Add support for I2C, EEPROM and RTC.
4029 commit fa5c2ba123b1bf88455bfc21db5e786ca045029d
4030 Author: Bartlomiej Sieka <tur@semihalf.com>
4031 Date: Tue May 8 10:23:56 2007 +0200
4033 [Motion-PRO] Add ATA support. Add CF-booting commands to the default
4036 commit 06241d50a3ab1b20a0b08baeeaffcaa23ae4b839
4037 Author: Bartlomiej Sieka <tur@semihalf.com>
4038 Date: Tue May 8 09:39:12 2007 +0200
4040 [Motion-PRO] Change IPB clock frequency from 50MHz to 100MHz. This
4041 eliminates networking problems in Linux (timeouts).
4043 commit 1f1369c34b629be94702684d41d3fddf0f6193e7
4044 Author: Bartlomiej Sieka <tur@semihalf.com>
4045 Date: Tue May 8 09:21:57 2007 +0200
4047 [Motion-PRO] Enable Flat Device Tree support and modify default environment
4048 to allow booting of FDT-expecting kernels.
4050 commit fb05f6da35ea1c15c553abe6f23f656bf18dc5db
4051 Author: Michal Simek <monstr@monstr.eu>
4052 Date: Mon May 7 23:58:31 2007 +0200
4054 new: USE_MSR_INTR support
4056 commit 008861a2f3ef2c062744d733787c7e530a1b8761
4057 Author: Bartlomiej Sieka <tur@semihalf.com>
4058 Date: Mon May 7 22:36:15 2007 +0200
4060 [MPC5xxx] There are networking problems on the Motion-PRO board with
4061 current PHY initalization code (tftp timeouts all the time). This commit
4062 temporarily disables PHY initalization sequence to make the networking
4063 operational, until a fix is found.
4065 commit abca901869c3760b6c5fecb825db6c1d91a78a93
4066 Author: Wolfgang Denk <wd@denx.de>
4067 Date: Mon May 7 22:10:36 2007 +0200
4069 Get rid of duplicated file (see include/configs/sbc8560.h instead)
4071 Signed-off-by: Wolfgang Denk <wd@denx.de>
4073 commit 207b7b2c9d9752e0f6478c30c29b7087f6e6cbb6
4074 Author: Wolfgang Denk <wd@denx.de>
4075 Date: Mon May 7 22:07:08 2007 +0200
4077 Get rid of duplicated file (see doc/README.SBC8560 instead)
4079 Signed-off-by: Wolfgang Denk <wd@denx.de>
4081 commit a7bac7e9b57ba948051beb19ec5be3a75ce75383
4082 Author: Michal Simek <monstr@monstr.eu>
4083 Date: Mon May 7 19:43:10 2007 +0200
4085 fix: read and write MSR - repair number of parameters
4087 commit 193b4a3bb3acaddf798da8de0da05d94ba8774ee
4088 Author: Jeffrey Mann <mannj@embeddedplanet.com>
4089 Date: Mon May 7 19:42:49 2007 +0200
4091 [PATCH] ppc4xx: Fix CONFIG_SYS_CLK_FREQ definition in Sequoia config file
4093 A '3' got cut off in the formatting of the last patch to automatically
4094 change the clock speed of the system clock on sequoia board.
4096 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
4097 Signed-off-by: Stefan Roese <sr@denx.de>
4099 commit 19bf1fbad7f19d5a120be9b1daf136e052fcab39
4100 Author: Michal Simek <monstr@monstr.eu>
4101 Date: Mon May 7 19:33:51 2007 +0200
4103 new: fsl interrupt support
4104 FSL_Has_data is connected to INTC.
4106 commit 792032baa7d625e34c981ab6df521911bd8dc861
4107 Author: Michal Simek <monstr@monstr.eu>
4108 Date: Mon May 7 19:30:12 2007 +0200
4110 fix: interrupt handler
4113 commit f3f001a341ef185d0f13841be5b5dc3395aacc31
4114 Author: Michal Simek <monstr@monstr.eu>
4115 Date: Mon May 7 19:25:08 2007 +0200
4117 fix: remove asm code
4119 commit fb7c2dbef02c9f6f8d7b04ec4c2bfb91418b9c01
4120 Author: Michal Simek <monstr@monstr.eu>
4121 Date: Mon May 7 19:12:43 2007 +0200
4123 fix: clean interrupt
4125 commit 42efed6130c8fcf7da881385b5427065d2801757
4126 Author: Michal Simek <monstr@monstr.eu>
4127 Date: Mon May 7 17:22:25 2007 +0200
4129 fix: interrupt handler for multiple sources
4131 commit 48fbd3a4cdabbebc1debd7eed73c00c2caf914f6
4132 Author: Michal Simek <monstr@monstr.eu>
4133 Date: Mon May 7 17:11:09 2007 +0200
4135 new: add writing to msr register
4137 commit 3a619dd7bed03e8b4d22a3911f90fd12af5376c2
4138 Author: Markus Klotzbuecher <mk@denx.de>
4139 Date: Mon May 7 16:43:56 2007 +0200
4141 Fix an ancient CHANGELOG conflict
4143 commit ac4cd59d59c9bf3f89cb7a344abf8184d678f562
4144 Author: Timur Tabi <timur@freescale.com>
4145 Date: Sat May 5 08:12:30 2007 +0200
4147 5xxx: write MAC address to mac-address and local-mac-address
4149 Some device trees have a mac-address property, some have local-mac-address,
4150 and some have both. To support all of these device trees, ftp_cpu_setup()
4151 should write the MAC address to mac-address and local-mac-address, if they
4154 Signed-off-by: Timur Tabi <timur@freescale.com>
4155 Acked-by: Grant Likely <grant.likely@secretlab.ca>
4157 commit a9d87e2707dcb249f6bb7f7ff7e00acd8cda9fd2
4158 Author: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
4159 Date: Sun Apr 29 14:01:54 2007 +0200
4161 [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message
4163 MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up
4164 message. Use PVR to distinguish between the two variants, and print proper CPU
4167 Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
4168 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
4169 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
4171 commit 4ec5bd55ed1ffa91a774af298769621f4fbb18c1
4172 Author: Ladislav Michl <ladis@linux-mips.org>
4173 Date: Wed Apr 25 16:01:26 2007 +0200
4175 [PATCH] simplify silent console
4177 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
4178 Acked-by: Stefan Roese <sr@denx.de>
4180 commit b7598a43f2b421a713d8135e98a42c37d9eb9df0
4181 Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
4182 Date: Mon Apr 23 15:30:39 2007 +0200
4184 [PATCH] Avoid assigning PCI resources from zero address
4186 If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE
4187 core complains and IDE drivers fails to work. Also, assigning zero to a BAR
4188 was illegal according to PCI 2.1 (the later revisions seem to have excluded the
4189 sentence about "0" being considered an invalid address) -- so, use a reasonable
4190 starting value of 0x1000 (that's what the most Linux archs are using).
4192 Alternatively, one might have fixed the calls to pci_set_region() individually
4193 (some code even seems to have taken care of this issue) but that would have
4194 been a lot more work. :-)
4196 Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
4197 Acked-by: Stefan Roese <sr@denx.de>
4199 commit 9ffd451afeb08e5be7ddae680487ec962b2bca25
4200 Author: Jeffrey Mann <mannj@embeddedplanet.com>
4201 Date: Mon Apr 23 14:00:11 2007 +0200
4203 [patch] setenv(...) can delete environmentalvariables
4205 update setenv() function so that entering a NULL value for the
4206 variable's value will delete the environmental variable
4208 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
4209 Acked-by: Stefan Roese <sr@denx.de>
4211 commit ebd0a0ae05a44769c4e27458ad4e9f3438250443
4212 Author: Mike Frysinger <vapier@gentoo.org>
4213 Date: Mon Apr 23 13:54:24 2007 +0200
4215 [patch] use unsigned char in smc91111 driver for mac
4217 the v_mac variable in the smc91111 driver is declared as a signed char ...
4218 this causes problems when one of the bytes in the MAC is "signed" like 0xE0
4219 because when it gets printed out, you get a display like:
4220 0xFFFFFFE0 and that's no good
4222 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4224 commit ffc50f9bb194343c6303517a517708457a5eb6b8
4225 Author: Michal Simek <monstr@monstr.eu>
4226 Date: Sat May 5 18:54:42 2007 +0200
4228 new: FSL and MSR support #2
4230 commit f7e2e0eb0668136305f78bb9c21be79b48a34247
4231 Author: Michal Simek <monstr@monstr.eu>
4232 Date: Sat May 5 18:27:16 2007 +0200
4234 new: FSL and MSR support
4236 commit 2f15278c2eb911c668b4fe562130b78cf554d139
4237 Author: Wolfgang Denk <wd@denx.de>
4238 Date: Sat May 5 18:23:11 2007 +0200
4240 Coding stylke cleanup; update CHANGELOG.
4242 Signed-off-by: Wolfgang Denk <wd@denx.de>
4244 commit 885ec89b648a899a2f32393fd3ffd9f7234c4402
4245 Author: Wolfgang Denk <wd@denx.de>
4246 Date: Sat May 5 18:05:02 2007 +0200
4248 Add STX GP3 SSA board to MAKEALL script; update CHANGELOG.
4250 Signed-off-by: Wolfgang Denk <wd@denx.de>
4252 commit 5499645b3fe17a548af9dfc479ca6e2455f179a2
4253 Author: Wolfgang Denk <wd@denx.de>
4254 Date: Sat May 5 17:15:50 2007 +0200
4256 Make "file" command happy with some config.mk files; update CHANGELOG
4258 commit e3b8c78bc2489c27ae020986ef0eaca684866cef
4259 Author: Jeffrey Mann <mannj@embeddedplanet.com>
4260 Date: Sat May 5 08:32:14 2007 +0200
4262 ppc4xx: Detect if the sysclk on Sequoia is 33 or 33.333 MHz
4264 The AMCC Secquoia board has been changed in a new revision from using a
4265 33.000 MHz clock to a 33.333 MHz system clock. A bit in the CPLD
4266 indicates the difference. This patch reads that bit and uses the correct
4267 clock speed for the board. This code is backward compatable will all
4268 prior boards. All prior boards will be read as 33.000.
4270 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
4271 Signed-off-by: Stefan Roese <sr@denx.de>
4273 commit f544ff6656fca263ed1ebe39899b6d95da67c8b8
4274 Author: Stefan Roese <sr@denx.de>
4275 Date: Sat May 5 08:29:01 2007 +0200
4277 ppc4xx: Sequoia: Remove cpu/ppc4xx/speed.c from NAND booting
4279 Using cpu/ppc4xx/speed.c to calculate the bus frequency is too big
4280 for the 4k NAND boot image so define bus_frequency to 133MHz here
4281 which is save for the refresh counter setup.
4283 Signed-off-by: Stefan Roese <sr@denx.de>
4285 commit 2f550ab976405300f5b07bf2890800840d0aa05f
4286 Author: Timur Tabi <timur@freescale.com>
4287 Date: Sat May 5 08:12:30 2007 +0200
4289 5xxx: write MAC address to mac-address and local-mac-address
4291 Some device trees have a mac-address property, some have local-mac-address,
4292 and some have both. To support all of these device trees, ftp_cpu_setup()
4293 should write the MAC address to mac-address and local-mac-address, if they
4296 Signed-off-by: Timur Tabi <timur@freescale.com>
4297 Acked-by: Grant Likely <grant.likely@secretlab.ca>
4299 commit a79886590593ba1d667c840caa4940c61639f18f
4300 Author: Thomas Knobloch <knobloch@siemens.com>
4301 Date: Sat May 5 07:04:42 2007 +0200
4303 NAND: Wrong calculation of page number in nand_block_bad()
4305 In case that there is no memory based bad block table available the
4306 function nand_block_checkbad() in drivers/mtd/nand/nand_base.c will call
4307 nand_block_bad() directly. When parameter 'getchip' is set to zero,
4308 nand_block_bad() will not right shift the offset to calculate the
4309 correct page number.
4311 Signed-off-by: Thomas Knobloch <knobloch@siemens.com>
4312 Signed-off-by: Stefan Roese <sr@denx.de>
4314 commit 9877d7dcd1eebe61aa5d8b8ffe9c048ea426e6f6
4315 Author: Wolfgang Denk <wd@denx.de>
4316 Date: Fri May 4 10:02:33 2007 +0200
4318 Fix initrd length corruption in bootm command.
4320 When using FDT Images, the length of an inital ramdisk was
4321 overwritten (bug introduced by commit 87a449c8, 22 Aug 2006).
4323 Patches by Timur Tabi & Johns Daniel.
4325 Signed-off-by: Wolfgang Denk <wd@denx.de>
4327 commit 068aab660bc3912b930be5540e6b3f3fd6ad3c96
4328 Author: Kim Phillips <kim.phillips@freescale.com>
4329 Date: Thu May 3 19:43:52 2007 -0500
4331 mpc83xx: fix trivial error in MAKEALL
4333 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
4335 commit c64a89d6ce8584b9fc64f4e85da9ecac3cfc2c2a
4336 Author: Wolfgang Denk <wd@denx.de>
4337 Date: Thu May 3 16:34:41 2007 +0200
4339 Update board configuration for STX GP3SSA board:
4341 Enable hush shell, environment in flash rather in EEPROM,
4342 more user-friendly default environment, etc.
4343 The simple EEPROM environment can be selected easily in the board
4346 Signed-off-by: Wolfgang Denk <wd@denx.de>
4348 commit 2c6fb199dc5756fc72f49d1f4de105e089049d65
4349 Author: Wolfgang Denk <wd@denx.de>
4350 Date: Tue Apr 24 14:37:49 2007 +0200
4352 Cleanup STX GP3SSA code; fix build and compile problems.
4354 commit 35171dc04e028ecacc23ad916a66295472555dbf
4355 Author: Dan Malek <dan@embeddedalley.com>
4356 Date: Fri Jan 5 09:15:34 2007 +0100
4358 Add support for STX GP3SSA (stxssa) Board
4360 Signed-off-by Dan Malek, <dan@embeddedalley.com>
4362 commit f2134f8e9eb006bdcd729e89f309c07b2fa45180
4363 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
4364 Date: Wed May 2 13:31:53 2007 +0200
4366 macb: Don't restart autonegotiation if we already have link
4368 Rework macb_phy_init so that it doesn't attempt to re-negotiate if the
4371 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
4373 commit 04fcb5d38bc90779cd9a710d60702075986f0e29
4374 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
4375 Date: Wed May 2 13:22:38 2007 +0200
4377 macb: Introduce a few barriers when dealing with DMA descriptors
4379 There were a few theoretical possibilities that the compiler might
4380 optimize away DMA descriptor reads and/or writes and thus cause
4381 synchronization problems with the hardware. Insert barriers where
4382 we depend on reads/writes actually hitting memory.
4384 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
4386 commit ffa621a0d12a1ccd81c936c567f8917a213787a8
4387 Author: Andy Fleming <afleming@freescale.com>
4388 Date: Sat Feb 24 01:08:13 2007 -0600
4390 Cleaned up some 85xx PCI bugs
4392 * Cleaned up the CDS PCI Config Tables and added NULL entries to
4394 * Fixed PCIe LAWBAR assignemt to use the cpu-relative address
4395 * Fixed 85xx PCI code to assign powar region sizes based on the
4396 config values (rather than hard-coding them)
4397 * Fixed the 8548 CDS PCI2 IO to once again have 0 as the base address
4399 Signed-off-by: Andy Fleming <afleming@freescale.com>
4401 commit 6743105988fc44d5b0d30388c790607835aae7a6
4402 Author: Andy Fleming <afleming@freescale.com>
4403 Date: Mon Apr 23 02:54:25 2007 -0500
4405 Add support for the 8568 MDS board
4407 This included some changes to common files:
4408 * Add 8568 processor SVR to various places
4409 * Add support for setting the qe bus-frequency value in the dts
4410 * Add the 8568MDS target to the Makefile
4412 Signed-off-by: Andy Fleming <afleming@freescale.com>
4414 commit af1c2b84bf27c8565baddc82d1abb93700d10e2e
4415 Author: David Updegraff <dave@cray.com>
4416 Date: Fri Apr 20 14:34:48 2007 -0500
4418 Add support for treating unknown PHYs as generic PHYs.
4420 When bringing up u-boot on new boards, PHY support sometimes gets
4421 neglected. Most PHYs don't really need any special support,
4422 though. By adding a generic entry that always matches if nothing
4423 else does, we can provide support for "unsupported" PHYs for the
4426 The generic PHY driver supports most PHYs, including gigabit.
4428 Signed-off-by: David Updegraff <dave@cray.com>
4429 Signed-off-by: Andy Fleming <afleming@freescale.com>
4431 commit a75af9bfd8fff0499efdbb90601cec5a2afef117
4432 Author: James Yang <James.Yang@freescale.com>
4433 Date: Wed Feb 7 15:28:04 2007 -0600
4435 Conditionalize 8641 Rev1.0 MCM workarounds
4437 Signed-off-by: James Yang <James.Yang@freescale.com>
4438 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4440 commit f64702b7fc8f8df39d31add770df6e372f9e9ce3
4441 Author: Timur Tabi <timur@freescale.com>
4442 Date: Mon Apr 30 13:59:50 2007 -0500
4444 Fix memory initialization on MPC8349E-mITX
4446 Define CFG_DDR_SDRAM_CLK_CNTL for the MPC8349E-mITX and MPC8349E-mITX-GP.
4447 This allows ddr->sdram_clk_cntl to be properly initialized. This is necessary
4448 on some ITX boards, notably those with a revision 3.1 CPU.
4450 Also change spd_sdram() in cpu/mpc83xx/spd_sdram.c to not write anything into
4451 ddr->sdram_clk_cntl if CFG_DDR_SDRAM_CLK_CNTL is not defined.
4453 Signed-off-by: Timur Tabi <timur@freescale.com>
4454 Acked-by: Michael Benedict <MBenedict@twacs.com>
4455 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
4457 commit 54b2d434ae9d01787936f34fe1759cf3d7624ae3
4458 Author: Kim Phillips <kim.phillips@freescale.com>
4459 Date: Mon Apr 30 15:26:21 2007 -0500
4461 mpc83xx: replace elaborate boottime verbosity with 'clocks' command
4463 and fix CPU: to align with Board: display text.
4465 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
4467 commit c1ab82669d9525998c34e802a12cad662723f22a
4468 Author: James Yang <James.Yang@freescale.com>
4469 Date: Fri Mar 16 13:02:53 2007 -0500
4471 Rewrote picos_to_clk() to avoid rounding errors.
4472 Clarified that conversion is to DRAM clocks rather than platform clocks.
4473 Made function static to spd_sdram.c.
4475 Signed-off-by: James Yang <James.Yang@freescale.com>
4476 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4478 commit 8b39501d28754e72726ce7fb02310e56dbdf116a
4479 Author: Stefan Roese <sr@denx.de>
4480 Date: Sun Apr 29 14:13:01 2007 +0200
4482 ppc4xx: Bamboo: Use current NAND driver and *not* the legacy driver
4484 Signed-off-by: Stefan Roese <sr@denx.de>
4486 commit 864aa6a6a466fcb92bf32b1d7dba79cd709b52c9
4487 Author: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
4488 Date: Sun Apr 29 14:01:54 2007 +0200
4490 [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message
4492 MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up
4493 message. Use PVR to distinguish between the two variants, and print proper CPU
4496 Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
4497 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
4498 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
4500 commit 5c5d3242935cf3543af01142627494434834cf98
4501 Author: Kim Phillips <kim.phillips@freescale.com>
4502 Date: Wed Apr 25 12:34:38 2007 -0500
4504 mpc83xx: minor fixups for 8313rdb introduction
4506 commit ada4d40091f6ed4a4f0040e08d20db21967e4a67
4507 Author: Ladislav Michl <ladis@linux-mips.org>
4508 Date: Wed Apr 25 16:01:26 2007 +0200
4510 [PATCH] simplify silent console
4512 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
4513 Acked-by: Stefan Roese <sr@denx.de>
4515 commit 144876a380f5756f57412caf74c1d6dc201dd796
4516 Author: Michal Simek <monstr@monstr.eu>
4517 Date: Tue Apr 24 23:01:02 2007 +0200
4519 [PATCH] MTD partition support, JFFS2 support
4521 commit 37ed6cdd4159195bfad68d8a237f6adda8f482cb
4522 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4523 Date: Tue Apr 24 14:03:45 2007 +0200
4525 ppc4xx: setup 440EPx/GRx ZMII/RGMII bridge depending on PFC register content.
4527 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4529 commit 66ed6cca3f340f7a8a06d9272ae2ef8e96f0273d
4530 Author: Andy Fleming <afleming@freescale.com>
4531 Date: Mon Apr 23 02:37:47 2007 -0500
4533 Reworked 85xx speed detection code
4535 Changed the code to read the registers and calculate the clock
4536 rates, rather than using a "switch" statement.
4538 Idea from Andrew Klossner <andrew@cesa.opbu.xerox.com>
4540 Signed-off-by: Andy Fleming <afleming@freescale.com>
4542 commit 81f481ca708ed6a56bf9c410e3191dbad581c565
4543 Author: Andy Fleming <afleming@freescale.com>
4544 Date: Mon Apr 23 02:24:28 2007 -0500
4548 * Add support to the Makefile
4549 * Add 8544 configuration support to the tsec driver
4550 * Add 8544 SVR numbers to processor.h
4552 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
4553 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4555 commit 0d8c3a2096eaff8d7de89d45e9af4d4b0d4868fe
4556 Author: Andy Fleming <afleming@freescale.com>
4557 Date: Fri Feb 23 17:12:25 2007 -0600
4559 Support 1G size on 8548
4561 e500v2 and newer cores support 1G page sizes.
4563 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
4564 Signed-off-by: Andy Fleming <afleming@freescale.com>
4566 commit 45cef612cc601d2d1c890fbbd7cdc9609a189a46
4567 Author: Andy Fleming <afleming@freescale.com>
4568 Date: Fri Feb 23 17:11:16 2007 -0600
4570 Changed BOOKE_PAGESZ_nGB to BOOKE_PAGESZ_nG
4572 The other pagesz constants use one letter to specify order of
4573 magnitude. Also change the one reference to it in mpc8548cds/init.S
4575 Signed-off-by: Andy Fleming <afleming@freescale.com>
4577 commit 1f9a318cea14272edd10d63739e2d326c90f430e
4578 Author: Andy Fleming <afleming@freescale.com>
4579 Date: Fri Feb 23 16:28:46 2007 -0600
4581 Only set ddrioovcr for 8548 rev1.
4583 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
4584 Signed-off-by: Andy Fleming <afleming@freescale.com>
4586 commit 9343dbf85bc03033f2102d8e8543567c2c1ad2d2
4587 Author: Andy Fleming <afleming@freescale.com>
4588 Date: Sat Feb 24 01:16:45 2007 -0600
4590 Tweak DDR ECC error counter
4592 Enable single-bit error counter when memory was cleared by ddr controller.
4594 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
4595 Signed-off-by: Andy Fleming <afleming@freescale.com>
4597 commit 85e7c7a45e3dd9c7ce3e722352ba60f8df1a7a4b
4598 Author: Timur Tabi <timur@freescale.com>
4599 Date: Mon Feb 12 13:34:55 2007 -0600
4601 85xx: write MAC address to mac-address and local-mac-address
4603 Some device trees have a mac-address property, some have local-mac-address,
4604 and some have both. To support all of these device trees, ftp_cpu_setup()
4605 should write the MAC address to mac-address and local-mac-address, if they
4608 Signed-off-by: Timur Tabi <timur@freescale.com>
4610 commit 03b81b48eec0ad249ec97a4ae16c36fa2e014ff4
4611 Author: Andy Fleming <afleming@freescale.com>
4612 Date: Mon Apr 23 01:44:44 2007 -0500
4614 Some 85xx cpu cleanups
4616 * Cleaned up the TSR[WIS] clearing
4617 * Cleaned up DMA initialization
4619 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
4620 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4621 Acked-by: Andy Fleming <afleming@freescale.com>
4623 commit 151d5d992eab8c497b24c816c73dc1ad8bffb4eb
4624 Author: Andy Fleming <afleming@freescale.com>
4625 Date: Mon Apr 23 01:32:22 2007 -0500
4627 Add cpu support for the 8544
4629 Recognize new SVR values, and add a few register definitions
4631 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
4632 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4633 Acked-by: Andy Fleming <afleming@freescale.com>
4635 commit 25d83d7f4ac65727182d8ddaf7ba42fa74cf65ae
4636 Author: Jon Loeliger <jdl@freescale.com>
4637 Date: Wed Apr 11 16:51:02 2007 -0500
4639 Add MPC8544DS basic port board files.
4641 Add board port under new board/freescale directory
4642 structure and reuse existing PIXIS FPGA support there.
4644 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
4645 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4647 commit 0cde4b00fc7393b89f379d83a9d436dcb1334bfa
4648 Author: Jon Loeliger <jdl@freescale.com>
4649 Date: Wed Apr 11 16:50:57 2007 -0500
4651 Add MPC8544DS main configuration file.
4653 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
4654 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4656 commit 362dd83077ac04c0296bca3e824ec2fb3d44d9d6
4657 Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
4658 Date: Wed Dec 27 22:07:15 2006 +0300
4660 Fix PCI I/O space mapping on Freescale MPC85x0ADS
4662 The PCI I/O space mapping for Freescale MPC8540ADS board was broken by commit
4663 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc which failed to update the #define's
4664 describing the local address window used for the PCI I/O space accesses -- fix
4665 this and carry over the necessary changes into the MPC8560ADS code since the
4666 PCI I/O space mapping was also broken for this board (by the earlier commit
4667 087454609e47295443af793a282cddcd91a5f49c). Add the comments clarifying how
4668 the PCI I/O space must be mapped to all the MPC85xx board config. headers.
4670 Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
4672 board/mpc8540ads/init.S | 4 ++--
4673 board/mpc8560ads/init.S | 4 ++--
4674 include/configs/MPC8540ADS.h | 5 ++---
4675 include/configs/MPC8541CDS.h | 2 +-
4676 include/configs/MPC8548CDS.h | 2 +-
4677 include/configs/MPC8560ADS.h | 8 ++++----
4678 6 files changed, 12 insertions(+), 13 deletions(-)
4680 commit 96629cbabdb727d4a5e62542deefc01d498db6dc
4681 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
4682 Date: Tue Dec 5 16:42:30 2006 +0800
4684 u-boot: Fix e500 v2 core reset bug
4686 The following patch fixes the e500 v2 core reset bug.
4687 For e500 v2 core, a new reset control register is added to reset the
4690 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
4692 commit 63247a5acd58032e6cf33f525bc3923b467bac88
4693 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
4694 Date: Wed Dec 20 11:01:00 2006 +0800
4696 u-boot: v2: Remove the fixed TLB and LAW entrynubmer
4698 Remove the fixed TLB and LAW entry nubmer. Use actually TLB and LAW
4699 entry number to control the loop. This can reduce the potential risk
4700 for the 85xx processor increasing its TLB adn LAW entry number.
4702 Signed-off-by: Swarthout Edward <swarthout@freescale.com>
4703 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
4705 commit 0b1934ba12fd408fcc3b8bd9f4b04864c42a42bf
4706 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
4707 Date: Mon Dec 18 17:01:04 2006 +0800
4709 u-boot: Fix the 85xxcds tsec bug
4711 Fix the 85xxcds tsec bug.
4712 When enable PCI, tsec.o should be added to u-boot.lds to make tsec work.
4714 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
4716 commit 7337b237ffc4aaf1b9467024fe472a880d852598
4717 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
4718 Date: Fri Dec 15 14:43:31 2006 +0800
4720 u-boot: Fix CPU2 errata on MPC8548CDS board
4722 This patch apply workaround of CPU2 errata on MPC8548CDS board.
4724 Signed-off-by:Ebony Zhu <ebony.zhu@freescale.com>
4726 commit 39b18c4f3e0b6d0dc00f4e68bad2da3766c85f09
4727 Author: ebony.zhu@freescale.com <ebony.zhu@freescale.com>
4728 Date: Mon Dec 18 16:25:15 2006 +0800
4730 u-boot: Disables MPC8548CDS 2T_TIMING for DDR by default
4732 This patch disables MPC8548CDS 2T_TIMING for DDR by default.
4734 Signed-off-by:Ebony Zhu <ebony.zhu@freescale.com>
4736 commit 41fb7e0f1ec9b91bdae2565bab5f2e3ee15039c7
4737 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
4738 Date: Thu Dec 14 14:14:55 2006 +0800
4740 u-boot: Enable PCI function and add PEX & rapidio memory map on MPC8548CDS board
4742 Enable PCI function and add PEX & rapidio memory map on MPC8548CDS
4744 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
4746 commit 96b8a05432f346f36493535c85320b70ec9c7c1b
4747 Author: Scott Wood <scottwood@freescale.com>
4748 Date: Mon Apr 16 14:54:15 2007 -0500
4750 mpc83xx: Add MPC8313ERDB support.
4752 Signed-off-by: Scott Wood <scottwood@freescale.com>
4754 commit 49ea3b6eafe606285ae4d5c378026153dde53200
4755 Author: Scott Wood <scottwood@freescale.com>
4756 Date: Mon Apr 16 14:34:21 2007 -0500
4758 mpc83xx: Add generic PCI setup code.
4760 Board code can now request the generic setup code rather than having to
4761 copy-and-paste it for themselves. Boards should be converted to use this
4762 once they're tested with it.
4764 Signed-off-by: Scott Wood <scottwood@freescale.com>
4766 commit 7c98e5193e93df6b9b651851d54b638a61ebb0ea
4767 Author: Scott Wood <scottwood@freescale.com>
4768 Date: Mon Apr 16 14:34:19 2007 -0500
4770 mpc83xx: Add 831x support to speed.c.
4772 Signed-off-by: Scott Wood <scottwood@freescale.com>
4774 commit 0f253283a32d91e06844d7f87f9b33f4f4fbce8f
4775 Author: Scott Wood <scottwood@freescale.com>
4776 Date: Mon Apr 16 14:34:18 2007 -0500
4778 mpc83xx: Add 831x support to global_data.h
4780 Signed-off-by: Scott Wood <scottwood@freescale.com>
4782 commit 95e7ef897e54591e615fc1b458b74c286fe1fb06
4783 Author: Scott Wood <scottwood@freescale.com>
4784 Date: Mon Apr 16 14:34:16 2007 -0500
4786 mpc83xx: Change PVR_83xx to PVR_E300C1-3, and update checkcpu().
4788 Rather than misleadingly define PVR_83xx as the specific type of 83xx
4789 being built for, the PVR of each core revision is defined. checkcpu() now
4790 prints the core that it detects, rather than aborting if it doesn't find
4791 what it thinks it wants.
4793 Signed-off-by: Scott Wood <scottwood@freescale.com>
4795 commit a35b0c4950d84cf9e3a9e32b916135956d1ac636
4796 Author: Scott Wood <scottwood@freescale.com>
4797 Date: Mon Apr 16 14:34:15 2007 -0500
4799 mpc83xx: Recognize SPR values for MPC8311 and MPC8313.
4801 Signed-off-by: Scott Wood <scottwood@freescale.com>
4803 commit d87c57b201b4572d16f1b642998faa00c9912b16
4804 Author: Scott Wood <scottwood@freescale.com>
4805 Date: Mon Apr 16 14:31:55 2007 -0500
4807 mpc83xx: Add register definitions for MPC831x.
4809 Signed-off-by: Scott Wood <scottwood@freescale.com>
4811 commit 7fc4c71a143be8666d70803fb25ae60379c95622
4812 Author: Stefan Roese <sr@denx.de>
4813 Date: Mon Apr 23 15:39:59 2007 +0200
4817 Signed-off-by: Stefan Roese <sr@denx.de>
4819 commit 38257988abfe74d459ca2ad748b109ca04e4efe1
4820 Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
4821 Date: Mon Apr 23 15:30:39 2007 +0200
4823 [PATCH] Avoid assigning PCI resources from zero address
4825 If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE
4826 core complains and IDE drivers fails to work. Also, assigning zero to a BAR
4827 was illegal according to PCI 2.1 (the later revisions seem to have excluded the
4828 sentence about "0" being considered an invalid address) -- so, use a reasonable
4829 starting value of 0x1000 (that's what the most Linux archs are using).
4831 Alternatively, one might have fixed the calls to pci_set_region() individually
4832 (some code even seems to have taken care of this issue) but that would have
4833 been a lot more work. :-)
4835 Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
4836 Acked-by: Stefan Roese <sr@denx.de>
4838 commit afb903a2eb9436baa9270ccc0c27082d86497d89
4839 Author: Jeffrey Mann <mannj@embeddedplanet.com>
4840 Date: Mon Apr 23 14:00:11 2007 +0200
4842 [patch] setenv(...) can delete environmentalvariables
4844 update setenv() function so that entering a NULL value for the
4845 variable's value will delete the environmental variable
4847 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
4848 Acked-by: Stefan Roese <sr@denx.de>
4850 commit 36f104e5caa747d568eff26b369565af57c2ffa6
4851 Author: Mike Frysinger <vapier@gentoo.org>
4852 Date: Mon Apr 23 13:54:24 2007 +0200
4854 [patch] use unsigned char in smc91111 driver for mac
4856 the v_mac variable in the smc91111 driver is declared as a signed char ...
4857 this causes problems when one of the bytes in the MAC is "signed" like 0xE0
4858 because when it gets printed out, you get a display like:
4859 0xFFFFFFE0 and that's no good
4861 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4863 commit d98c0885ad617fccf21e7c26ef8cb728fbfb2459
4864 Author: Rodolfo Giometti <giometti@enneenne.com>
4865 Date: Mon Apr 23 13:10:52 2007 +0200
4867 USB: (Another) delay for crappy USB keys.
4869 Some USB keys are slow in giving back an answer when the Root HUB
4870 enables power lines.
4872 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
4874 commit 323bfa8f436dc3bc57187c9b1488bc3146ff1522
4875 Author: Stefan Roese <sr@denx.de>
4876 Date: Mon Apr 23 12:00:22 2007 +0200
4878 Remove BOARDLIBS usage completely
4880 Signed-off-by: Stefan Roese <sr@denx.de>
4882 commit 32556443840f127170e4baa8bdd5b567039f6c36
4883 Author: Michal Simek <monstr@monstr.eu>
4884 Date: Sat Apr 21 21:07:22 2007 +0200
4886 [PATCH] SystemACE support for Microblaze
4888 commit 0643631aa1036cd746bf5d15f5a34bc7bc01ea4f
4889 Author: Michal Simek <monstr@monstr.eu>
4890 Date: Sat Apr 21 21:02:40 2007 +0200
4892 16bit read/write little endian
4894 commit 9d1d6a34d26c5933bc097ce73c9348f95573cdd4
4895 Author: Michal Simek <monstr@monstr.eu>
4896 Date: Sat Apr 21 20:53:31 2007 +0200
4898 Change ML401 parameters - Xilinx BSP
4900 commit 2e343b9a57f32e1bd08c35c9976910333fb4e13d
4901 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
4902 Date: Wed Feb 28 05:37:29 2007 -0600
4904 mpc8641hpcn: Fix LAW and TLB setup to use the IO_PHYS #defines.
4906 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
4908 commit 79cb47391eebef85acadb3f6961ef6c55cace6ac
4909 Author: Zhang Wei <wei.zhang@freescale.com>
4910 Date: Fri Jan 19 10:42:37 2007 +0800
4912 Enable LAWs for MPC8641 PCI-Ex2.
4914 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
4915 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4917 commit bd7851ce1e1f140665b520026abf1042968b1102
4918 Author: Jon Loeliger <jdl@freescale.com>
4919 Date: Fri Apr 20 14:12:26 2007 -0500
4921 mpc86xx; Write MAC address to mac-address and local-mac-address
4923 Some device trees have a mac-address property, some have local-mac-address,
4924 and some have both. To support all of these device trees, ftp_cpu_setup()
4925 should write the MAC address to mac-address and local-mac-address, if they
4928 Signed-off-by: Timur Tabi <timur@freescale.com>
4929 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4931 commit 7dbdf28b8bd855a8530dc3292e4982575a197060
4932 Author: Jon Loeliger <jdl@freescale.com>
4933 Date: Fri Apr 20 14:11:38 2007 -0500
4935 mpc86xx: protect memcpy to bad address if a mac-address is missing from dt
4937 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
4938 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4940 commit 14da5f7675bbb427c469e3f45006e027b6e21db9
4941 Author: Wolfgang Denk <wd@denx.de>
4942 Date: Fri Apr 20 17:43:28 2007 +0200
4944 Cleanup compiler warnings, update CHANGELOG
4946 Signed-off-by: Wolfgang Denk <wd@denx.de>
4948 commit 6923565db12af34fd5e02d354ee65a8c78ac460f
4949 Author: Detlev Zundel <dzu@denx.de>
4950 Date: Fri Apr 20 12:01:47 2007 +0200
4952 Fix breakage of NC650 board with respect to nand support.
4954 Signed-off-by: Detlev Zundel <dzu@denx.de>
4956 commit 39f23cd90947639ac278a18ff277ec786b5ac167
4957 Author: Domen Puncer <domen.puncer@telargo.com>
4958 Date: Fri Apr 20 11:13:16 2007 +0200
4960 [RFC PATCH] icecube/lite5200b: fix OF_TBCLK (timebase-frequency) calculation
4962 G2 core reference manual says decrementer and time base
4963 are decreasing/increasing once every 4 bus clock cycles.
4964 Lets fix it, so time in Linux won't run twice as fast
4966 Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
4967 Acked-by: Grant Likely <grant.likely@secretlab.ca>
4969 commit 7651f8bdbba03bb0b4f241e2d2c4cb65b230bd56
4970 Author: Gerald Van Baren <vanbaren@cideas.com>
4971 Date: Thu Apr 19 23:14:39 2007 -0400
4973 Fix serious pointer bug with bootm and reserve map.
4975 What was suppose to be a stack variable was declared as a pointer,
4976 overwriting random memory.
4977 Also moved the libfdt.a requirement into the main Makefile. That is
4980 commit d21686263574e95cb3e9e9b0496f968b1b897fdb
4981 Author: Stefan Roese <sr@denx.de>
4982 Date: Thu Apr 19 09:53:52 2007 +0200
4984 ppc4xx: Fix chip select timing for SysACE access on AMCC Katmai
4986 Previous versions used full wait states for the chip select #1 which
4987 is connected to the Xilinix SystemACE controller on the AMCC Katmai
4988 evaluation board. This leads to really slow access and therefore low
4989 performance. This patch now sets up the chip select a lot faster
4990 resulting in much better read/write performance of the Linux driver.
4992 Signed-off-by: Stefan Roese <sr@denx.de>
4994 commit 37837828d89084879bee2f2b8c7c68d4695940df
4995 Author: Wolfgang Denk <wd@denx.de>
4996 Date: Wed Apr 18 17:49:29 2007 +0200
4998 Clenaup, update CHANGELOG
5000 Signed-off-by: Wolfgang Denk <wd@denx.de>
5002 commit fd094c6379e2ef8a4d0ceb5640b24cb0c8d04449
5003 Author: Wolfgang Denk <wd@denx.de>
5004 Date: Wed Apr 18 17:20:58 2007 +0200
5008 Signed-off-by: Wolfgang Denk <wd@denx.de>
5010 commit 2a26ec4732efd7a308d0bbc97714c1d75ef1173b
5011 Author: Wolfgang Denk <wd@denx.de>
5012 Date: Wed Apr 18 17:07:26 2007 +0200
5014 Cleanup, update CHANGELOG
5016 Sigend-off-by: Wolfgang Denk <wd@denx.de>
5018 commit 5f6c732affea9647762d27a4617a2ae64c52dceb
5019 Author: Wolfgang Denk <wd@denx.de>
5020 Date: Wed Apr 18 16:17:46 2007 +0200
5024 commit ad4eb555671d97f96dc56eab55103b1f86874b01
5025 Author: Wolfgang Denk <wd@denx.de>
5026 Date: Wed Apr 18 14:30:39 2007 +0200
5028 MCC200 board: remove warning which is obsolete after PSoC firmware changes
5030 Signed-off-by: Wolfgang Denk <wd@denx.de>
5032 commit 3747a3f010b2b1442dec3e871c69788b6017aaae
5033 Author: Domen Puncer <domen.puncer@telargo.com>
5034 Date: Wed Apr 18 12:11:05 2007 +0200
5036 [PATCH] icecube/lite5200b: document wakeup from low-power support
5038 Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
5040 commit e673226ff9d6aa91b47ceac74b8c13770b06bb37
5041 Author: Stefan Roese <sr@denx.de>
5042 Date: Wed Apr 18 12:07:47 2007 +0200
5044 ppc4xx: Update Acadia to not setup PLL when booting via bootstrap EEPROM
5046 Signed-off-by: Stefan Roese <sr@denx.de>
5048 commit 90e6f41cf09fc98f6ccb510e183d53ab8546cf2f
5049 Author: Stefan Roese <sr@denx.de>
5050 Date: Wed Apr 18 12:05:59 2007 +0200
5052 ppc4xx: Add output for bootrom location to 405EZ ports
5054 Now 405EZ ports also show upon bootup from which boot device
5055 they are configured to boot:
5057 U-Boot 1.2.0-gd3832e8f-dirty (Apr 18 2007 - 07:47:05)
5059 CPU: AMCC PowerPC 405EZ Rev. A at 199.999 MHz (PLB=133, OPB=66, EBC=66 MHz)
5060 Bootstrap Option E - Boot ROM Location EBC (32 bits)
5061 16 kB I-Cache 16 kB D-Cache
5062 Board: Acadia - AMCC PPC405EZ Evaluation Board
5064 Signed-off-by: Stefan Roese <sr@denx.de>
5066 commit 9c00dfb0bf89c8c23e8af5b5bdf49cf66d769f85
5067 Author: Peter Pearse <peter.pearse@arm.com>
5068 Date: Tue Apr 17 13:30:33 2007 +0100
5070 Move ppearse to ARM board list
5071 Add Konstantin Kletschke for scb9328.
5072 Signed-off-by: Peter Pearse <peter.pearse@arm.com>
5074 commit d3832e8fe1b214ec62424eac36cfda9fc56d21b3
5075 Author: Domen Puncer <domen.puncer@telargo.com>
5076 Date: Mon Apr 16 14:00:13 2007 +0200
5078 [PATCH] icecube/lite5200b: wakeup from low-power support
5080 U-Boot part of Lite5200b low power mode support.
5081 Puts SDRAM out of self-refresh and transfers control to
5082 address saved at physical 0x0.
5084 Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
5085 Acked-by: Grant Likely <grant.likely@secretlab.ca>
5087 commit f35a53fc7b0c79fcfe7bdc01163c4b34aaba1460
5088 Author: Gerald Van Baren <vanbaren@cideas.com>
5089 Date: Sun Apr 15 13:54:26 2007 -0400
5091 Fix the ft_cpu_setup() property settings.
5093 Use "setter" functions instead of flags, cleaner and more flexible.
5094 It also fixes the problem noted by Timur Tabi that the ethernet MAC
5095 addresses were all being set incorrectly to the same MAC address.
5097 commit c28abb9c614f65ce2096cc4a66fc886c77d0e5a4
5098 Author: Gerald Van Baren <vanbaren@cideas.com>
5099 Date: Sat Apr 14 22:51:24 2007 -0400
5101 Improve the bootm command for CONFIG_OF_LIBFDT
5103 In bootm, create the "/chosen" node only if it doesn't already exist
5104 (better matches the previous behavior).
5105 Update for proper reserved memory map handling for initrd.
5107 commit 3f9f08cf91c8a6949a5d78a18bd3d8df7b86d888
5108 Author: Gerald Van Baren <vanbaren@cideas.com>
5109 Date: Sat Apr 14 22:46:41 2007 -0400
5111 Add some utilities to manipulate the reserved memory map.
5113 commit 8048cdd56f04a756eeea4951f402bf5cc33785db
5114 Author: Wolfgang Denk <wd@denx.de>
5115 Date: Sat Apr 14 21:16:54 2007 +0200
5119 commit 8e6875183cdca91c134408d119d4abcd48ef6856
5120 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
5121 Date: Sun Dec 17 18:56:46 2006 +0100
5123 AVR32: Enable MMC support
5125 Set up the portmux for the MMC interface and enable the MMC driver
5126 along with support for DOS partitions, ext2 and FAT filesystems.
5128 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
5130 commit fc26c97bb6df41b4a95662c34054fe912387bf38
5131 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
5132 Date: Fri Jan 20 10:03:53 2006 +0100
5136 Driver for the Atmel MCI controller (MMC interface) for AT32AP CPUs.
5138 The AT91 ARM-based CPUs use basically the same hardware, so it should
5139 be possible to share this driver, but no effort has been made so far.
5141 Hardware documentation can be found in the AT32AP7000 data sheet,
5142 which can be downloaded from
5144 http://www.atmel.com/dyn/products/datasheets.asp?family_id=682
5146 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
5148 commit 05fdab1ef6a10d049a50021a86f1226f444d9b9f
5149 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
5150 Date: Sun Dec 17 18:55:37 2006 +0100
5152 AVR32: Add clk and gpio infrastructure for mmci
5154 Implement functions for configuring the mmci pins, as well as
5155 functions for getting the clock rate of the mmci controller.
5157 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
5159 commit 7fac3f69e9f05c5e5326681976c35d129324c4de
5160 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
5161 Date: Sun Dec 17 18:53:56 2006 +0100
5163 Enable partition support with MMC
5165 Include implementations of init_part() and get_partition_info() when
5168 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
5170 commit 9a24f477a1ed5bb0f74377c985d754ebbfa44872
5171 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
5172 Date: Sun Dec 17 17:14:30 2006 +0100
5174 AVR32: Enable networking
5176 Implement MACB initialization for AVR32 and ATSTK1000, and turn
5177 everything on, including the MACB driver.
5179 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
5181 commit 5c1fe1ffffd1750a7e47e5a2e2cd600c00e4f009
5182 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
5183 Date: Fri Jan 20 10:03:34 2006 +0100
5185 Atmel MACB ethernet driver
5187 Driver for the Atmel MACB on-chip ethernet controller.
5189 This driver has been tested on the ATSTK1000 board with a AT32AP7000
5190 CPU. It should probably work on AT91SAM926x as well with some minor
5193 Hardware documentation can be found in the AT32AP7000 data sheet,
5194 which can be downloaded from
5196 http://www.atmel.com/dyn/products/datasheets.asp?family_id=682
5198 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
5200 commit b4ec9c2d43d894729bb633bfdbdfa95a962c1556
5201 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
5202 Date: Sun Dec 17 16:56:14 2006 +0100
5204 AVR32: Add clk and gpio infrastructure for macb0 and macb1
5206 Implement functions for configuring the macb0 and macb1 pins, as
5207 well as functions for getting the clock rate of the various
5208 busses the macb ethernet controllers are connected to.
5210 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
5212 commit d5acb95b16a0a74c643524342c3437e765426d05
5213 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
5214 Date: Sun Dec 17 15:39:15 2006 +0100
5216 AVR32: Implement simple DMA memory allocator
5218 Implement dma_alloc_coherent() which returns cache-aligned
5221 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
5223 commit 91975b0fea773c9e681fea8cf3349669f27685ee
5224 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
5225 Date: Sun Dec 17 15:46:02 2006 +0100
5227 Import <linux/mii.h> from the Linux kernel
5229 Instead of creating yet another set of MII register definitions
5230 in the macb driver, here's a complete set of definitions for everyone
5233 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
5235 commit 1b804b229556a4d862da93c0ec94e79419364b2c
5236 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
5237 Date: Wed Mar 21 19:47:36 2007 +0100
5239 AVR32: Include more commands for ATSTK1000
5241 Include the imi, imls and jffs commands sets by default on ATSTK1000.
5242 Also define CONFIG_BOOTARGS to something more useful, define
5243 CONFIG_BOOTCOMMAND and enable autoboot by default.
5245 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
5247 commit 9c0deb5ae3ea0189f2e08ac29ef1316f1fb8548d
5248 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
5249 Date: Wed Mar 21 19:44:48 2007 +0100
5251 AVR32: Provide a definition of struct stat
5253 Copy the definition of struct stat from the Linux kernel.
5255 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
5257 commit 12f099c08167a7a51aeee623bc16dafd0841271c
5258 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
5259 Date: Sun Dec 17 14:46:06 2006 +0100
5261 AVR32: Use initdram() instead of board_init_memories()
5263 Conform to the "standard" interface and use initdram() instead of
5264 board_init_memories() on AVR32. This enables us to get rid of the
5265 sdram_size member of the global_data struct as well.
5267 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
5269 commit 1f4f2121c2685182eb87fa9a9b799d1917387a1c
5270 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
5271 Date: Mon Nov 20 15:53:10 2006 +0100
5273 AVR32: Relocate u-boot to SDRAM
5275 Relocate the u-boot image into SDRAM like everyone else does. This
5276 means that we can handle much larger .data and .bss than we used to.
5278 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
5280 commit df548d3c3e2bbc40258713167859ffc2ce99a900
5281 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
5282 Date: Sun Nov 19 18:06:53 2006 +0100
5284 AVR32: Resource management rewrite
5286 Rewrite the resource management code (i.e. I/O memory, clock gating,
5287 gpio) so it doesn't depend on any global state. This is necessary
5288 because this code is heavily used before relocation to RAM, so we
5289 can't write to any global variables.
5291 As an added bonus, this makes u-boot's memory footprint a bit smaller,
5292 although some functionality has been left out; all clocks are enabled
5293 all the time, and there's no checking for gpio line conflicts.
5295 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
5297 commit 03d1e1365796cd15d1726e8a51fd8b5be50b2fe9
5298 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
5299 Date: Sat Nov 18 18:01:13 2006 +0100
5301 AVR32: Clean up memory-map.h for at32ap7000
5303 Convert spaces to tabs (must have missed this one last time around),
5304 sort the entries by address and group them together by bus
5307 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
5309 commit 28c699ef69f4b6cdf252e4747b7b590028a88981
5310 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
5311 Date: Sat Nov 18 17:32:31 2006 +0100
5313 AVR32: Build position-independent u-boot
5315 Add -fPIC -mno-init-got to the avr32-specific CFLAGS to make u-boot
5316 position independent. This will make relocation a lot easier.
5318 -mno-init-got means that gcc shouldn't emit code to load the GOT
5319 address into r6 in every function prologue. We do it once and for
5320 all in the early startup assembly code, so enabling this option
5321 makes u-boot a bit faster and smaller.
5323 The assembly parts have always been position-independent, so no code
5324 changes should be necessary.
5326 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
5328 commit 5374b36de91d006d1df9536259fa9f66b01aa3aa
5329 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
5330 Date: Sat Nov 18 17:24:31 2006 +0100
5332 AVR32: Use avr32-linux- cross-compilation prefix by default
5334 It doesn't really matter which toolchain you use to compile u-boot,
5335 but the avr32-linux one is probably what most people have installed.
5337 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
5339 commit c841beeddebece0039e724fb27f4d1a39ee1c6b6
5340 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
5341 Date: Sat Nov 18 17:15:30 2006 +0100
5343 AVR32: Split start_u_boot into board_init_f and board_init_r
5345 Split the avr32 initialization code into a function to run before
5346 relocation, board_init_f and a function to run after relocation,
5347 board_init_r. For now, board_init_f simply calls board_init_r
5350 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
5352 commit 37403005cfe6bb13964d450f6a48a0b0f2f7017e
5353 Author: Heiko Schocher <hs@pollux.denx.de>
5354 Date: Sat Apr 14 05:26:48 2007 +0200
5356 [Fix] Set the LED status register on the UC101 for the LXT971 PHY.
5357 clear the Display after reset.
5359 Signed-off-by: Heiko Schocher <hs@denx.de>
5361 commit 7882751c78b7ecabfd49b0eff8de27661c71f16c
5362 Author: Denis Peter <d.peter@mpl.ch>
5363 Date: Fri Apr 13 09:13:33 2007 +0200
5365 [PATCH] Fix bugs in cmd_ide.c and cmd_scsi.c
5367 Fix bug introduced by "Fix get_partition_info() parameter error in all
5368 other calls" from 2005-03-04 in cmd_ide.c and cmd_scsi.c, which prevented
5369 to use diskboot or scsiboot form another device than 0.
5371 Signed-off-by: Denis Peter <d.peter@mpl.ch>
5373 commit 0b94504d22e70f537c17a0d38c87edb6e370977d
5374 Author: Greg Lopp <lopp@pobox.com>
5375 Date: Fri Apr 13 08:02:24 2007 +0200
5377 [PATCH] Fix use of "void *" for block dev read/write buffer pointers
5379 Signed-of-by: Greg Lopp <lopp@pobox.com>
5380 Acked-by: Grant Likely <grant.likely@secretlab.ca>
5382 commit 6fbf261f8df294e589cfadebebe5468e3c0f29e9
5383 Author: Xie Xiaobo <r63061@freescale.com>
5384 Date: Fri Mar 9 19:08:25 2007 +0800
5386 Fix two bugs for MPC83xx DDR2 controller SPD Init
5388 There are a few bugs in the cpu/mpc83xx/spd_sdram.c
5389 the first bug is that the picos_to_clk routine introduces a huge
5390 rounding error in 83xx.
5391 the second bug is that the mode register write recovery field is
5392 tWR-1, not tWR >> 1.
5394 commit 2ad3aba01d37b72e7c957b07e102fccd64fe6d13
5395 Author: Jeffrey Mann <mannj@embeddedplanet.com>
5396 Date: Thu Apr 12 14:15:59 2007 +0200
5398 ppc4xx: Fix i2c divisor calcularion for PPC4xx
5400 This patch fixes changes the i2c_init(...) function to use the function
5401 get_OPB_freq() rather than calculating the OPB speed by
5402 sysInfo.freqPLB/sysInfo.pllOpbDiv. The get_OPB_freq() function is
5403 specific per processor. The prior method was not and so was calculating
5404 the wrong speed for some PPC4xx processors.
5406 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
5407 Signed-off-by: Stefan Roese <sr@denx.de>
5409 commit 6c9ba919375db977aaad9146bf320c7afd07ae7a
5410 Author: Wolfgang Denk <wd@denx.de>
5411 Date: Wed Apr 11 17:25:01 2007 +0200
5415 Signed-off-by: Wolfgang Denk <wd@denx.de>
5417 commit 51056dd9863e6a1bc363afbbe1775c58cd967418
5418 Author: Wolfgang Denk <wd@denx.de>
5419 Date: Wed Apr 11 17:22:55 2007 +0200
5421 Update for SC3 board
5423 * Make IDE timeout configurable through ide_reset_timeout variable.
5424 * Use Newline as "password" string
5425 * Use just a single partition in NAND flash
5427 commit 3d98b85800c80dc68227c8f10bf5c93456d6d054
5428 Author: Haiying Wang <haiying.wang@freescale.com>
5429 Date: Mon Jan 22 12:37:30 2007 -0600
5431 Add PIXIS FPGA support for MPC8641HPCN board.
5433 Move the 8641HPCN's PIXIS code to the new directory
5434 board/freescale/common/ as it will be shared by
5435 future boards not in the same processor family.
5437 Write a "pixis_reset" command that utilizes the FPGA
5438 reset sequencer to support alternate soft-reset options
5439 such as using the "alternate" flash bank, enabling
5440 the watch dog, or choosing different CPU frequencies.
5442 Add documentation for the pixis_reset to README.mpc8641hpcn.
5444 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
5445 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5447 commit 64dbbd40c58349b64f43fd33dbb5ca0adb67d642
5448 Author: Gerald Van Baren <vanbaren@cideas.com>
5449 Date: Fri Apr 6 14:19:43 2007 -0400
5451 Moved fdt command support code to fdt_support.c
5453 ...in preparation for improving the bootm command's handling of fdt blobs.
5454 Also cleaned up some coding sloppiness.
5456 commit 6679f9299534e488a171a9bb8f9bb891de247aab
5457 Author: Gerald Van Baren <vanbaren@cideas.com>
5458 Date: Fri Apr 6 14:17:14 2007 -0400
5460 libfdt: Make fdt_check_header() public
5462 Changed _fdt_check_header() to fdt_check_header() and made it part of
5463 the interface - it is a useful routine.
5465 Also did some asthetics cleanup to the include files (headers).
5467 commit c0707ce65677650b5ceab0500ee50ae5168afef2
5468 Author: Aubrey Li <aubrey.adi@gmail.com>
5469 Date: Thu Apr 5 18:34:06 2007 +0800
5471 [Blackfin][PATCH] Kill off a bunch of common local prototypes
5473 commit 7b7e30aa64bb6657a1bfd32fdbdbfeb561e6a48d
5474 Author: Aubrey Li <aubrey.adi@gmail.com>
5475 Date: Thu Apr 5 18:33:04 2007 +0800
5477 [Blackfin][PATCH] Fix dynamic CPLB generation issue
5479 commit 0445e3a264251d75b1be45ef713c70726a2952f0
5480 Author: Aubrey Li <aubrey.adi@gmail.com>
5481 Date: Thu Apr 5 18:31:47 2007 +0800
5483 [Blackfin][PATCH] minior cleanup
5485 commit 155fd766573981090e638b493d5857562151862e
5486 Author: Aubrey Li <aubrey.adi@gmail.com>
5487 Date: Thu Apr 5 18:31:18 2007 +0800
5489 [Blackfin][PATCH] Fix copyright and update license
5491 commit 9fd437bbd75d282f899e1da50be20a2bf38450bc
5492 Author: Aubrey Li <aubrey.adi@gmail.com>
5493 Date: Thu Apr 5 18:30:25 2007 +0800
5495 [Blackfin][PATCH] Add BF537 EMAC driver initialization
5497 commit 889256e8604e0c68db1d866d720894dffede9df6
5498 Author: Aubrey Li <aubrey.adi@gmail.com>
5499 Date: Thu Apr 5 18:29:55 2007 +0800
5501 [Blackfin][PATCH] call real the system synchronize instruction
5503 commit e0df1c921b788289564e4c1ee7120a6a9cd3ab05
5504 Author: Aubrey Li <aubrey.adi@gmail.com>
5505 Date: Thu Apr 5 18:29:17 2007 +0800
5507 [Blackfin][PATCH] remove asm/page.h as we do not actually use/want any of these definitions nor does any other arch include it
5509 commit dfeeab2cd680df047e68e723b246adf6f33bb556
5510 Author: Aubrey Li <aubrey.adi@gmail.com>
5511 Date: Thu Apr 5 18:28:34 2007 +0800
5513 [Blackfin][PATCH]: fix flash unaligned copy issue
5515 commit 443feb740584e406efa203af909fe2926608e8d5
5516 Author: Igor Marnat <marny@rambler.ru>
5517 Date: Wed Mar 21 09:55:01 2007 +0300
5519 Update usage of 'nc' in README.NetConsole
5521 Added information about usage of NetConsole on systems where the -l and -p
5522 switches are mutually exclusive.
5524 Signed-off-by: Igor Marnat <marny@rambler.ru>
5525 Signed-off-by: Ben Warren <bwarren@qstreams.com>
5527 commit 31c98a88228021b314c89ebb8104fb6473da4471
5528 Author: Wolfgang Denk <wd@denx.de>
5529 Date: Wed Apr 4 02:09:30 2007 +0200
5531 Minor coding style cleanup.
5533 commit 94abd7c0583ebe01e799b25f451201deeaab550d
5534 Author: Wolfgang Denk <wd@denx.de>
5535 Date: Wed Apr 4 01:49:15 2007 +0200
5539 commit 822af351ad2babc7d99033361a5fcacd30f6bc78
5540 Author: Rodolfo Giometti <giometti@enneenne.com>
5541 Date: Tue Apr 3 14:27:18 2007 +0200
5543 Support for the Philips ISP116x HCD (Host Controller Driver)
5545 Signed-off-by: Rodolfo Giometti <giometti@enneenne.com>
5547 commit edf5851be6c17c031d4f71dd5b0a12040b7c50c8
5548 Author: Markus Klotzbuecher <mk@denx.de>
5549 Date: Tue Apr 3 14:27:08 2007 +0200
5551 USB: cleanup monahans usb support. Remove dead code.
5553 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
5555 commit a65c5768e5537530bd1780af3d3fddc3113a163c
5556 Author: Stefan Roese <sr@denx.de>
5557 Date: Mon Apr 2 10:09:30 2007 +0200
5559 ppc4xx: Change SysACE address on Katmai
5561 With this new base address of the Xilinx SystemACE controller
5562 the Linux driver will be easier to adapt, since it can now be
5563 mapped via the "normal" ioremap() call.
5565 Signed-off-by: Stefan Roese <sr@denx.de>
5567 commit aea03c4e8c3a21ce43d3faf48a6e6d474c8bdf73
5568 Author: Gerald Van Baren <vanbaren@cideas.com>
5569 Date: Sat Mar 31 14:30:53 2007 -0400
5571 Fix some minor whitespace violations.
5573 commit 213bf8c822de8eecaf69860684469cdaba2e9e6a
5574 Author: Gerald Van Baren <vanbaren@cideas.com>
5575 Date: Sat Mar 31 12:23:51 2007 -0400
5577 Add a flattened device tree (fdt) command (2 of 2)
5579 Modifications to the existing code to support the new fdt command.
5581 commit 781e09ee6e3e3e392ab362c1f0ef1068adc76e3e
5582 Author: Gerald Van Baren <vanbaren@cideas.com>
5583 Date: Sat Mar 31 12:22:10 2007 -0400
5585 Add a flattened device tree (fdt) command (1 of 2)
5587 The fdt command uses David Gibson's libfdt library to manipulate as well
5588 as print the flattened device tree. This patch is the new command,
5589 the second part is the modifications to the existing code.
5591 commit 3af0d587d93e0be5f96e1b30fa41e662f8b0803e
5592 Author: Gerald Van Baren <vanbaren@cideas.com>
5593 Date: Sat Mar 31 12:13:43 2007 -0400
5595 libfdt: Enhanced and published fdt_next_tag()
5597 Enhanced the formerly private function _fdt_next_tag() to allow stepping
5598 through the tree, used to produce a human-readable dump, and made
5599 it part of the published interface.
5600 Also added some comments.
5602 commit fa3a74cec73dfd06a5ae35a9a3368200273aaa71
5603 Author: Gerald Van Baren <vanbaren@cideas.com>
5604 Date: Sat Mar 31 12:05:39 2007 -0400
5606 libfdt: Customizations for use by u-boot.
5608 Changes to David Gibson's original source to fit into u-boot's
5609 environment. No functionality changes.
5611 commit 35748177c64a4a83a00057e93bb33e40278a2a96
5612 Author: Gerald Van Baren <vanbaren@cideas.com>
5613 Date: Sat Mar 31 12:00:56 2007 -0400
5615 libfdt: Import libfdt source (2 of 2)
5617 This adds the applicable libfdt source files (unmodified) and a README
5618 to explain where the source came from.
5620 commit 7cd5da0fe877e7171a4cdd44880bce783132871a
5621 Author: Gerald Van Baren <vanbaren@cideas.com>
5622 Date: Sat Mar 31 11:59:59 2007 -0400
5624 libfdt: Import libfdt source (1 of 2)
5626 This adds the applicable libfdt source files (unmodified) and a README
5627 to explain where the source came from.
5629 commit da6ebc1bc082cbe3b6bbde079cafe09f7ebbad4b
5630 Author: Stefan Roese <sr@denx.de>
5631 Date: Sat Mar 31 13:16:23 2007 +0200
5633 ppc4xx: Update Katmai bootstrap command
5635 Now the DDR2 frequency is also 2*PLB frequency when 166MHz PLB
5638 Signed-off-by: Stefan Roese <sr@denx.de>
5640 commit cabee756a6532986729477c3cc1ea16ef8517ad2
5641 Author: Stefan Roese <sr@denx.de>
5642 Date: Sat Mar 31 13:15:06 2007 +0200
5644 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
5646 Additional RAM information is now printed upon powerup, like
5647 DDR2 frequency and CAS latency.
5649 Signed-off-by: Stefan Roese <sr@denx.de>
5651 commit 60723803431ac75cad085690789e433d5ab9174e
5652 Author: Stefan Roese <sr@denx.de>
5653 Date: Sat Mar 31 08:48:36 2007 +0200
5655 ppc4xx: Change Yucca config file to support ECC
5657 With the updated 44x DDR2 driver the Yucca board now supports
5658 ECC generation and checking.
5660 Signed-off-by: Stefan Roese <sr@denx.de>
5662 commit 490e5730c674b20d708b783a2c5ffd7208f83873
5663 Author: Stefan Roese <sr@denx.de>
5664 Date: Sat Mar 31 08:47:34 2007 +0200
5666 ppc4xx: Fix "bootstrap" command for Katmai board
5668 The board specific "bootstrap" command is now fixed and can
5669 be used for the AMCC Katmai board to configure different
5670 CPU/PLB/OPB frequencies.
5672 Signed-off-by: Stefan Roese <sr@denx.de>
5674 commit 94f54703c3a776ec23e427ca2a16e0a79a5d50c1
5675 Author: Stefan Roese <sr@denx.de>
5676 Date: Sat Mar 31 08:46:08 2007 +0200
5678 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
5680 Fix a bug in the auto calibration routine. This driver now runs
5681 more reliable with the tested modules. It's also tested with
5682 167MHz PLB frequency (667MHz DDR2 frequency) on the Katmai.
5684 Signed-off-by: Stefan Roese <sr@denx.de>
5686 commit 342cd097be1e7affe82f42ab3da220959a699e64
5687 Author: Michal Simek <monstr@monstr.eu>
5688 Date: Fri Mar 30 22:52:09 2007 +0200
5690 [PATCH] Clean include dependence
5692 commit 6f934210fb293fde2cfb4251c6d96fdc58b6a906
5693 Author: Michal Simek <monstr@monstr.eu>
5694 Date: Fri Mar 30 22:42:45 2007 +0200
5696 [CLEAN] Remove inefficient Suzaku code
5698 commit 430f1b0f9a670c2f13eaa52e66a10db96dd3647d
5699 Author: Stefan Roese <sr@denx.de>
5700 Date: Wed Mar 28 15:03:16 2007 +0200
5702 Merge some AMCC make targets to keep the top-level Makefile smaller
5704 Signed-off-by: Stefan Roese <sr@denx.de>
5706 commit 0c75c9d84307a9f1cbe1ff0c4d8937ee3a96475e
5707 Author: Stefan Roese <sr@denx.de>
5708 Date: Wed Mar 28 14:52:12 2007 +0200
5710 i2c: Enable "old" i2c commands even when CONFIG_I2C_CMD_TREE is defined
5712 The "old" i2c commands (iprobe, imd...) are now compiled in again,
5713 even when the i2c command tree is enabled via the CONFIG_I2C_CMD_TREE
5716 Signed-off-by: Stefan Roese <sr@denx.de>
5718 commit 5da048adf44bea5e3b94080d02903c2e3fe7aa4a
5719 Author: Michal Simek <monstr@monstr.eu>
5720 Date: Tue Mar 27 00:32:16 2007 +0200
5722 PATCH: Resolve GPL license problem
5724 commit ae00bb4b2944dc64a485ed72a19754b11af7c223
5725 Author: Rodolfo Giometti <giometti@enneenne.com>
5726 Date: Mon Mar 26 12:03:36 2007 +0200
5728 PXA: pxa27x USB OHCI support
5730 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
5732 commit ae79f60677c208326535647dcbd5c3ec40dbcb0b
5733 Author: Markus Klotzbuecher <mk@denx.de>
5734 Date: Mon Mar 26 11:21:05 2007 +0200
5736 USB: remove the S3C24X0_merge #define, which was introduced while
5737 merging OHCI drivers.
5739 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
5741 commit 1798049522f594013aea29457d46794298c6ae15
5742 Author: Michal Simek <root@monstr.eu>
5743 Date: Mon Mar 26 01:39:07 2007 +0200
5745 Support for XUPV2P board
5747 BSP autoconfig support
5749 commit 0d974d5297349504a2ddfa09314be573b5df320a
5750 Author: Stefan Roese <sr@denx.de>
5751 Date: Sat Mar 24 15:57:09 2007 +0100
5753 [PATCH] Add 4xx GPIO functions
5755 This patch adds some 4xx GPIO functions. It also moves some of the
5756 common code and defines into a common 4xx GPIO header file.
5758 Signed-off-by: Stefan Roese <sr@denx.de>
5760 commit 2db633658bbf366ab0c8dad7a0727e1fb2ae6b11
5761 Author: Stefan Roese <sr@denx.de>
5762 Date: Sat Mar 24 15:55:58 2007 +0100
5764 [PATCH] Small Sequoia cleanup
5766 Signed-off-by: Stefan Roese <sr@denx.de>
5768 commit 3cb86f3e40d2a80356177434a99f75bc8baa9caf
5769 Author: Stefan Roese <sr@denx.de>
5770 Date: Sat Mar 24 15:45:34 2007 +0100
5772 [PATCH] Clean up 40EZ/Acadia support
5774 This patch cleans up all the open issue of the preliminary
5777 Signed-off-by: Stefan Roese <sr@denx.de>
5779 commit 6eb1df835191d8ce4b81d5af40fa8e0fbe78e997
5780 Author: Jon Loeliger <jdl@freescale.com>
5781 Date: Tue Dec 12 11:02:20 2006 -0600
5783 Fix 8641HPCN problem with ld version 2.16
5785 (Dot outside sections problem).
5787 This fix is in the spirit of 807d5d7319330e336ab34a5623c5e0d73b87d540.
5789 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5791 commit 9964a4dd0d4ef5a037febaebf1aa494b1a72991c
5792 Author: Haiying Wang <haiying.wang@freescale.com>
5793 Date: Thu Dec 7 10:35:55 2006 -0600
5795 Set Rev 2.x 86xx PIC in mixed mode.
5797 Prevent false interrupt from hanging Linux as MSR[EE] is set
5798 to enable interrupts by changing the PIC out of the default
5799 pass through mode into mixed mode.
5801 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
5802 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5804 commit 5a58a73ceb0a4059c42ef64cedbc1a45e0aaa00e
5805 Author: Jason Jin <jason.jin@freescale.com>
5806 Date: Thu Dec 7 10:32:35 2006 -0600
5808 Add flash cmd function to 8641HPCN ramboot
5810 Also fixes some commmand for 8641 HPCN ramboot case.
5812 Signed-off-by: Jason Jin <jason.jin@freescale.com>
5813 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5815 commit 2ccceacc04b009d923afb7c26189ba2f8a2a5d46
5816 Author: Ed Swarthout <ed.swarthout@freescale.com>
5817 Date: Thu Dec 7 10:34:14 2006 -0600
5819 Add support for 8641 Rev 2 silicon.
5821 Without this patch, I am unable to get to the prompt on rev 2 silicon.
5822 Only set ddrioovcr for rev1.
5824 Signed-off-by: Ed Swarthout<ed.swarthout@freescale.com>
5825 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5827 commit 44ba464b99001f8bd1c456a1e9d59726252f707a
5828 Author: Wolfgang Denk <wd@denx.de>
5829 Date: Thu Mar 22 00:13:12 2007 +0100
5831 Code cleanup / re-insert previous Copyright entries.
5833 Signed-off-by: Wolfgang Denk <wd@denx.de>
5835 commit 2a8dfe08359a1b663418b2faa1da1d7bce34d302
5836 Author: Wolfgang Denk <wd@denx.de>
5837 Date: Wed Mar 21 23:26:15 2007 +0100
5839 Code cleanup. Update CHANGELOG
5841 commit e6615ecf4eaf4dd52696934aed8f5c6474cfd286
5842 Author: Stefan Roese <sr@denx.de>
5843 Date: Wed Mar 21 14:54:29 2007 +0100
5845 ppc4xx: Fix file mode of include/configs/acadia.h
5847 Signed-off-by: Stefan Roese <sr@denx.de>
5849 commit d5f4614c9350d9333e575100fb250aab774d0258
5850 Author: Markus Klotzbuecher <mk@denx.de>
5851 Date: Wed Mar 21 14:41:46 2007 +0100
5853 SPC1920: fix small clock routing bug
5855 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
5857 commit 16c0cc1c82081a493ab87c51980b28336ce1bce8
5858 Author: Stefan Roese <sr@denx.de>
5859 Date: Wed Mar 21 13:39:57 2007 +0100
5861 [PATCH] Add AMCC Acadia (405EZ) eval board support
5863 This patch adds support for the new AMCC Acadia eval board.
5865 Please note that this Acadia/405EZ support is still in a beta stage.
5866 Still lot's of cleanup needed but we need a preliminary release now.
5868 Signed-off-by: Stefan Roese <sr@denx.de>
5870 commit e01bd218b00af73499331a1a701625a852cd286f
5871 Author: Stefan Roese <sr@denx.de>
5872 Date: Wed Mar 21 13:38:59 2007 +0100
5874 [PATCH] Add AMCC PPC405EZ support
5876 This patch adds support for the new AMCC 405EZ PPC. It is in
5877 preparation for the AMCC Acadia board support.
5879 Please note that this Acadia/405EZ support is still in a beta stage.
5880 Still lot's of cleanup needed but we need a preliminary release now.
5882 Signed-off-by: Stefan Roese <sr@denx.de>
5884 commit 07e82cb2e284a893df6693f2a1337ab2c47bf6a1
5885 Author: Heiko Schocher <hs@pollux.denx.de>
5886 Date: Wed Mar 21 08:45:17 2007 +0100
5888 [PATCH] TQM8272: dont change the bits given from the HRCW
5889 for the SIUMCR and BCR Register.
5890 Fix the calculation for the EEprom Size
5892 Signed-off-by: Heiko Schocher <hs@denx.de>
5894 commit 654589873dbafcf104dff133ce0d03a4506e9cc3
5895 Author: Aubrey Li <aubrey.adi@gmail.com>
5896 Date: Tue Mar 20 18:16:24 2007 +0800
5898 [Blackfin][PATCH] Add BF561 EZKIT board support
5900 commit a6154fd1cfd020f6da8527e0365b1020a11a71d0
5901 Author: Aubrey Li <aubrey.adi@gmail.com>
5902 Date: Mon Mar 19 22:55:58 2007 +0800
5904 [Blackfin][PATCH] minor cleanup
5906 commit 389b6bb50f745bf5038ce030300d8a8512e96f79
5907 Author: Wolfgang Denk <wd@denx.de>
5908 Date: Mon Mar 19 13:10:08 2007 +0100
5910 Remove obsoleted POST files.
5912 Signed-off-by: Wolfgang Denk <wd@denx.de>
5914 commit 8e709bbb2636b5670a8f2b575e138eb1f55773f6
5915 Author: Aubrey Li <aubrey.adi@gmail.com>
5916 Date: Mon Mar 19 01:26:11 2007 +0800
5918 [PATCH] Add flash chip M29W320ET/B support
5920 commit 26bf7deca364a5b33f39e8f14ddd3f4081345015
5921 Author: Aubrey Li <aubrey.adi@gmail.com>
5922 Date: Mon Mar 19 01:24:52 2007 +0800
5924 [Blackfin][PATCH] Add BF537 stamp board support
5926 commit 8423e5e31a7235d05a482627315fb11d49c17bd7
5927 Author: Stefan Roese <sr@denx.de>
5928 Date: Fri Mar 16 21:11:42 2007 +0100
5930 [PATCH] Use dynamic SDRAM TLB setup on AMCC Ebony eval board
5932 Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the
5933 DDR memory are dynamically programmed matching the total size
5934 of the equipped memory (DIMM modules).
5936 Signed-off-by: Stefan Roese <sr@denx.de>
5938 commit 76d1466f918b881cda2d259254761e73885093c2
5939 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5940 Date: Tue Mar 13 13:38:05 2007 +0100
5942 [PATCH] renamed environment variable 'addcon' to 'addcons' for PCI405
5943 boards in terms of unification.
5945 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5947 commit a7090b993d3d4d2221ac3f33e6cb1d1b2ccc6bf0
5948 Author: Wolfgang Denk <wd@denx.de>
5949 Date: Tue Mar 13 16:05:55 2007 +0100
5951 Make SC3 board build with 'make O='; use 'addcons' consistently
5952 (SC3 and Jupiter used to use 'addcon' instead).
5954 Signed-off-by: Wolfgang Denk wd@denx.de
5956 commit 8502e30a28e492c756ea2d7df0ace026388fce4b
5957 Author: Heiko Schocher <hs@pollux.denx.de>
5958 Date: Tue Mar 13 09:40:59 2007 +0100
5960 [PATCH] update board config for jupiter Board:
5962 CONFIG_CMDLINE_EDITING,
5963 CFG_ENV_ADDR_REDUND activated
5965 Signed-off-by: Heiko Schocher <hs@denx.de>
5967 commit 0d93de11449390a5984b0236c3612e50f6dbb7e8
5968 Author: Aubrey Li <aubrey.adi@gmail.com>
5969 Date: Mon Mar 12 12:11:55 2007 +0800
5971 [Blackfin][PATCH] minor cleanup
5973 commit bfa5754a58477ac917d21527cd0f079d87cf188e
5974 Author: Aubrey Li <aubrey.adi@gmail.com>
5975 Date: Mon Mar 12 01:42:06 2007 +0800
5977 [Blackfin][PATCH] Fix BUILD_DIR option of MAKEALL building issue
5979 commit 8440bb14581a294375c34b91b42512f9753d1130
5980 Author: Aubrey Li <aubrey.adi@gmail.com>
5981 Date: Mon Mar 12 00:25:14 2007 +0800
5983 [Blackfin][PATCH] code cleanup
5985 commit cfc67116a706fd18b8f6a9c11a16753c5626d689
5986 Author: Michal Simek <monstr@monstr.eu>
5987 Date: Sun Mar 11 13:48:24 2007 +0100
5989 [Microblaze][PATCH] part 2
5991 interrupt controller support
5995 board information support
5997 booting image support
5999 adding support for Xilinx ML401
6001 commit 76316a318de91f6184e7c22a10e02d275ade2441
6002 Author: Michal Simek <monstr@monstr.eu>
6003 Date: Sun Mar 11 13:42:58 2007 +0100
6007 interrupt controller support
6011 board information support
6013 booting image support
6015 adding support for Xilinx ML401
6017 commit 8db13d63157811c839d15a313d9f2d2f5fd10af3
6018 Author: Aubrey Li <aubrey.adi@gmail.com>
6019 Date: Sat Mar 10 23:49:29 2007 +0800
6021 [Blackfin][PATCH] code cleanup
6023 commit ef26a08fef928b7bc11ae2c109e638dc3a016d91
6024 Author: Aubrey.Li <aubrey.adi@gmail.com>
6025 Date: Fri Mar 9 13:40:56 2007 +0800
6027 [Blackfin][PATCH-2/2] Common files changed to support bf533 platform
6029 commit 3f0606ad0b5639f7f22848fe5b4574e754d0470f
6030 Author: Aubrey.Li <aubrey.adi@gmail.com>
6031 Date: Fri Mar 9 13:38:44 2007 +0800
6033 [Blackfin]PATCH-1/2]: Remove obsolete blackfin port and add bf533 platform support
6035 commit 992423ab43c2bcf6b704853bd00af77450915e20
6036 Author: Stefan Roese <sr@denx.de>
6037 Date: Thu Mar 8 23:00:08 2007 +0100
6039 ppc4xx: Fix file mode of sequoia.c
6041 Signed-off-by: Stefan Roese <sr@denx.de>
6043 commit eb92f613556800f7483666db09d9a237ad911d4a
6044 Author: Wolfgang Denk <wd@pollux.denx.de>
6045 Date: Thu Mar 8 22:52:51 2007 +0100
6049 commit 8ce16f55c7b9752af3d8bed84521aec5337e2de1
6050 Author: John Otken john@softadvances.com <john@softadvances.com>
6051 Date: Thu Mar 8 09:39:48 2007 -0600
6053 ppc4xx: Clear Sequoia/Rainier security engine reset bits
6055 Signed-off-by: John Otken john@softadvances.com <john@softadvances.com>
6057 commit 650a330dd2539130c8c324791e2f9f75aed79d4e
6058 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
6059 Date: Thu Mar 8 16:26:52 2007 +0100
6061 [PATCH] I2C: add some more SPD eeprom decoding for DDR2 modules
6063 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
6065 commit d9fc703246840c4b268debf48c334ba55c597dc0
6066 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
6067 Date: Thu Mar 8 16:25:47 2007 +0100
6069 [PATCH] I2C: disable flat i2c commands when CONFIG_I2C_CMD_TREE is defined
6071 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
6073 commit ced5b9029043397348cdc88e0cfcd6b1f629250b
6074 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
6075 Date: Thu Mar 8 16:23:11 2007 +0100
6077 [PATCH] 4xx: allow CONFIG_I2C_CMD_TREE without CONFIG_I2C_MULTI_BUS
6079 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
6081 commit d8a8ea5c476d37006fc7f85b7f903142795c8b14
6082 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
6083 Date: Thu Mar 8 16:20:32 2007 +0100
6085 [PATCH] I2C: Add missing default CFG_SPD_BUS_NUM
6087 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
6089 commit f9fc6a5852a6335840882fa2111925010eea1abe
6090 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
6091 Date: Wed Mar 7 15:32:01 2007 +0100
6093 fixed ethernet phy configuration for plu405 board
6095 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
6097 commit 769104c9356594deb2092e204a39c05b33202d6c
6098 Author: Wolfgang Denk <wd@pollux.denx.de>
6099 Date: Thu Mar 8 21:49:27 2007 +0100
6103 commit 00cdb4ce5e1b42248e7e6522ad0da3421b988afa
6104 Author: Stefan Roese <sr@denx.de>
6105 Date: Thu Mar 8 10:13:16 2007 +0100
6107 [PATCH] Update AMCC Luan 440SP eval board support
6109 The AMCC Luan now uses the common 440SP(e) DDR SPD code for DDR
6110 inititializition. This includes DDR auto calibration and support
6111 for different DIMM modules, instead of the fixed setup used in
6112 the earlier version.
6114 This patch also enables the cache in FLASH for the startup
6115 phase of U-Boot (while running from FLASH). After relocating to
6116 SDRAM the cache is disabled again. This will speed up the boot
6117 process, especially the SDRAM setup, since there are some loops
6118 for memory testing (auto calibration).
6120 Signed-off-by: Stefan Roese <sr@denx.de>
6122 commit 2f5df47351910a2936c7741cf111855829200943
6123 Author: Stefan Roese <sr@denx.de>
6124 Date: Thu Mar 8 10:10:18 2007 +0100
6126 [PATCH] Update AMCC Yucca 440SPe eval board support
6128 The AMCC Yucca now uses the common 440SP(e) DDR SPD code for DDR
6129 inititializition. This includes DDR auto calibration and support
6130 for different DIMM modules, instead of the fixed setup used in
6131 the earlier version.
6133 Signed-off-by: Stefan Roese <sr@denx.de>
6135 commit 2721a68a9ea91f1e494649ce68b2577261f578e2
6136 Author: Stefan Roese <sr@denx.de>
6137 Date: Thu Mar 8 10:07:18 2007 +0100
6139 ppc4xx: Small AMCC Katmai 440SPe update
6141 Signed-off-by: Stefan Roese <sr@denx.de>
6143 commit df294497479b1dca6dd86318b2a912f72fede0df
6144 Author: Stefan Roese <sr@denx.de>
6145 Date: Thu Mar 8 10:06:09 2007 +0100
6147 ppc4xx: Update 440SP/440SPe DDR SPD setup code to support 440SP
6149 Signed-off-by: Stefan Roese <sr@denx.de>
6151 commit 83853178bd36bca6f0f8f1331476620c84a587fc
6152 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
6153 Date: Wed Mar 7 12:14:50 2007 -0600
6155 net - Support ping reply when processing net-loop
6157 Add ICMP_ECHO_REQUEST packet support by responding with a ICMP_ECHO_REPLY.
6159 This permits the ping command to test the phy interface when the phy
6160 is put in loopback mode (typically by setting register 0 bit 14).
6162 It also allows the port to respond to an external ping when u-boot is
6163 processing some other net command (such as tftp). This is useful when
6164 tftp appears to hang.
6166 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
6167 Signed-off-by: Ben Warren <bwarren@qstreams.com>
6169 commit fa1aef15bcd47736687be1af544506e90fba545d
6170 Author: Stefan Roese <sr@denx.de>
6171 Date: Wed Mar 7 16:43:00 2007 +0100
6173 [PATCH] Use dynamic SDRAM TLB setup on AMCC Ocotea eval board
6175 Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the
6176 DDR memory are dynamically programmed matching the total size
6177 of the equipped memory (DIMM modules).
6179 Signed-off-by: Stefan Roese <sr@denx.de>
6181 commit e2ebe696818939e2b974628be9c921ea3fe9de13
6182 Author: Stefan Roese <sr@denx.de>
6183 Date: Wed Mar 7 16:39:36 2007 +0100
6185 [PATCH] Fix AMCC 44x SPD SDRAM init code to support 2 DIMM's
6187 This patch fixes a problem that occurs when 2 DIMM's are
6188 used. This problem was first spotted and fixed by Gerald Jackson
6189 <gerald.jackson@reaonixsecurity.com> but this patch fixes the
6190 problem in a little more clever way.
6192 This patch also adds the nice functionality to dynamically
6193 create the TLB entries for the SDRAM (tlb.c). So we should
6194 never run into such problems with wrong (too short) TLB
6195 initialization again on these platforms.
6197 As this feature is new to the "old" 44x SPD DDR driver, it
6198 has to be enabled via the CONFIG_PROG_SDRAM_TLB define.
6200 Signed-off-by: Stefan Roese <sr@denx.de>
6202 commit 39218433983417b9df087976a79e3f80dd5e83d6
6203 Author: Wolfgang Denk <wd@denx.de>
6204 Date: Wed Mar 7 16:33:44 2007 +0100
6206 UC101: fix compiler warnings
6208 commit 8d7e2732221bc2d64df14f700c64c23e0a4c3dce
6209 Author: Wolfgang Denk <wd@pollux.denx.de>
6210 Date: Wed Mar 7 16:19:46 2007 +0100
6212 HMI1001: fix build error, cleanup compiler warnings.
6214 commit ad5bb451ade552c44bef9119d907929ebc2c126f
6215 Author: Wolfgang Denk <wd@pollux.denx.de>
6216 Date: Tue Mar 6 18:08:43 2007 +0100
6218 Restructure POST directory to support of other CPUs, boards, etc.
6220 commit a5284efd125967675b2e9c6ef7b95832268ad360
6221 Author: Wolfgang Denk <wd@pollux.denx.de>
6222 Date: Tue Mar 6 18:01:47 2007 +0100
6224 Fix HOSTARCH handling.
6225 Patch by Mike Frysinger, Mar 05 2007
6227 commit 07b7b0037aac5102939917d7cbe561b5c0d5aa44
6228 Author: Stefan Roese <sr@denx.de>
6229 Date: Tue Mar 6 07:47:04 2007 +0100
6231 [PATCH] Speed optimization of AMCC Sequoia/Rainier DDR2 setup
6233 As provided by the AMCC applications team, this patch optimizes the
6234 DDR2 setup for 166MHz bus speed. The values provided are also save
6235 to use on a "normal" 133MHz PLB bus system. Only the refresh counter
6236 setup has to be adjusted as done in this patch.
6238 For this the NAND booting version had to include the "speed.c" file
6239 from the cpu/ppc4xx directory. With this addition the NAND SPL image
6240 will just fit into the 4kbytes of program space. gcc version 4.x as
6241 provided with ELDK 4.x is needed to generate this optimized code.
6243 Signed-off-by: Stefan Roese <sr@denx.de>
6245 commit 647d3c3eed0da1d1505eecabe0b0fab96f956e68
6246 Author: Wolfgang Denk <wd@pollux.denx.de>
6247 Date: Sun Mar 4 01:36:05 2007 +0100
6251 commit 781e026c8aa6f7e9eb5f0e72cc4d20971219b148
6252 Author: Kim Phillips <kim.phillips@freescale.com>
6253 Date: Wed Feb 28 00:02:04 2007 -0600
6255 mpc83xx: fix implicit declaration of function 'ft_get_prop' warnings
6257 (cherry picked from c5bf13b02284c3204a723566a9bab700e5059659 commit)
6259 commit 4feab4de7bfc2cb2fed36ad76f93c3a69659bbaf
6260 Author: Kumar Gala <galak@kernel.crashing.org>
6261 Date: Tue Feb 27 23:51:42 2007 -0600
6263 mpc83xx: Fix config of Arbiter, System Priority, and Clock Mode
6265 The config value for:
6273 Were not being used when setting the appropriate register
6281 To allow full config of the SCCR.
6283 Also removed random CFG_SCCR settings in MPC8349EMDS, TQM834x, and sbc8349
6284 that were just bogus.
6286 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6288 commit d51b3cf371cd441030460ef19d36b2924c361b1a
6289 Author: Kim Phillips <kim.phillips@freescale.com>
6290 Date: Thu Feb 22 20:06:57 2007 -0600
6292 mpc83xx: update [local-]mac-address properties on UEC based devices
6294 8360 and 832x weren't updating their [local-]mac-address
6295 properties. This patch fixes that.
6297 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
6299 commit 61f4f912acbe60776c5e00df1ec94094ce672957
6300 Author: Timur Tabi <timur@freescale.com>
6301 Date: Tue Feb 13 10:41:42 2007 -0600
6303 mpc83xx: write MAC address to mac-address and local-mac-address
6305 Some device trees have a mac-address property, some have local-mac-address,
6306 and some have both. To support all of these device trees, this patch
6307 updates ftp_cpu_setup() to write the MAC address to mac-address if it exists.
6308 This function already updates local-mac-address.
6310 Signed-off-by: Timur Tabi <timur@freescale.com>
6312 commit 22d71a71f57fd5d38b27ac3848e50d790360a598
6313 Author: Kim Phillips <kim.phillips@freescale.com>
6314 Date: Tue Feb 27 18:41:08 2007 -0600
6316 mpc83xx: add command line editing by default
6318 commit 3fc0bd159103b536e1c54c6f4457a09b3aba66ca
6319 Author: Kim Phillips <kim.phillips@freescale.com>
6320 Date: Wed Feb 14 19:50:53 2007 -0600
6322 mpc83xx: Disable G1TXCLK, G2TXCLK h/w buffers
6324 Disable G1TXCLK, G2TXCLK h/w buffers. This patch
6325 fixes a networking timeout issue with MPC8360EA (Rev.2) PBs.
6327 Verified on Rev. 1.1, Rev. 1.2, and Rev. 2.0 boards.
6329 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
6330 Signed-off-by: Emilian Medve <Emilian.Medve@freescale.com>
6332 commit d61853cf2472e0b8bcbd131461a93d1c49ff0c1f
6333 Author: Xie Xiaobo <r63061@freescale.com>
6334 Date: Wed Feb 14 18:27:17 2007 +0800
6336 mpc83xx: Add DDR2 controller fixed/SPD Init for MPC83xx
6338 The code supply fixed and SPD initialization for MPC83xx DDR2 Controller.
6339 it pass DDR/DDR2 compliance tests.
6341 Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
6343 commit b110f40bd180c6b560276589beedf753e97c46ce
6344 Author: Xie Xiaobo <r63061@freescale.com>
6345 Date: Wed Feb 14 18:27:06 2007 +0800
6347 mpc83xx: Add the cpu specific code for MPC8360E rev2.0 MDS
6349 MPC8360E rev2.0 have new spridr,and PVR value,
6350 The MDS board for MPC8360E rev2.0 has 32M bytes Flash and 256M DDR2 DIMM.
6352 Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
6354 commit 8d172c0f0d85998a256a95b7459a5403a30380ed
6355 Author: Xie Xiaobo <r63061@freescale.com>
6356 Date: Wed Feb 14 18:26:44 2007 +0800
6358 mpc83xx: Add the cpu and board specific code for MPC8349E rev3.1 MDS
6360 MPC8349E rev3.1 have new spridr,and PVR value,
6361 The MDS board for MPC8349E rev3.1 has 32M bytes Flash and 256M DDR2 DIMM.
6363 Signed-off-by: Xie Xiaobo<X.Xie@freescale.com>
6365 commit f6f5f709e5c8e4564c4dfeecfdf2279244f9c83b
6366 Author: Joakim Tjernlund <joakim.tjernlund@transmode.se>
6367 Date: Wed Jan 31 11:04:19 2007 +0100
6369 mpc83xx: Fix empty i2c reads/writes in fsl_i2c.c
6371 Fix empty i2c reads/writes, i2c_write(0x50, 0x00, 0, NULL, 0)
6372 which is used to se if an slave will ACK after receiving its address.
6374 Correct i2c probing to use this method as the old method could upset
6375 a slave as it wrote a data byte to it.
6377 Add a small delay in i2c_init() to let the controller
6378 shutdown any ongoing I2C activity.
6380 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
6382 commit 7a78f148d6a7298e4fface680dc7eacd877b1aba
6383 Author: Timur Tabi <timur@freescale.com>
6384 Date: Wed Jan 31 15:54:29 2007 -0600
6386 mpc83xx: Add support for the MPC8349E-mITX-GP
6388 Add support for the MPC8349E-mITX-GP, a stripped-down version of the
6389 MPC8349E-mITX. Bonus features include support for low-boot (BMS bit in
6390 HRCW is 0) for the ITX and a README for the ITX and the ITX-GP.
6392 Signed-off-by: Timur Tabi <timur@freescale.com>
6394 commit fab16807adad350f618024350c6950165c247c72
6395 Author: Timur Tabi <timur@freescale.com>
6396 Date: Wed Jan 31 15:54:20 2007 -0600
6398 mpc83xx: Delete sdram_init() for MPC8349E-mITX
6400 There is no SDRAM on any of the 8349 ITX variants, so function sdram_init()
6401 never does anything. This patch deletes it.
6403 Signed-off-by: Timur Tabi <timur@freescale.com>
6405 commit a87c856eb411b9365937d0d4b9c21e46adbe1c14
6406 Author: Dave Liu <daveliu@freescale.com>
6407 Date: Fri Jan 19 10:43:26 2007 +0800
6409 mpc83xx: Fix the LAW1/3 bug
6411 The patch solves the alignment problem of the local bus access windows to
6412 render accessible the memory bank and PHY registers of UPC 1 (starting at
6413 0xf801 0000). What we actually did was to adjust the sizes of the bus
6414 access windows so that the base address alignment requirement would be met.
6416 Signed-off-by: Chereji Marian <marian.chereji@freescale.com>
6417 Signed-off-by: Gridish Shlomi <gridish@freescale.com>
6418 Signed-off-by: Dave Liu <daveliu@freescale.com>
6420 commit 97c4b397dce236a7318b304667bf89e59d08b17c
6421 Author: Kim Phillips <kim.phillips@freescale.com>
6422 Date: Tue Jan 30 16:15:31 2007 -0600
6424 mpc83xx: don't hang if watchdog configured on 8360, 832x
6426 don't hang if watchdog configured on 8360, 832x
6428 The watchdog programming model is the same across all 83xx devices;
6429 make the code reflect that.
6431 commit b70047478570e371ce7223be342ce98afea0f7d6
6432 Author: Kim Phillips <kim.phillips@freescale.com>
6433 Date: Tue Jan 30 16:15:21 2007 -0600
6435 mpc83xx: protect memcpy to bad address if a local-mac-address is missing from dt
6437 protect memcpy to bad address if a local-mac-address is missing from dt
6439 commit 6752ed088c75c26a89b70c46b7326a4cd6015f29
6440 Author: Kim Phillips <kim.phillips@freescale.com>
6441 Date: Tue Jan 30 16:15:04 2007 -0600
6443 mpc83xx: make 8360 default environment fdt be 8360 (not 8349)
6445 make 8360 default environment fdt be 8360 (not 8349)
6447 commit a28899c910024a0226331df07207b1038c300c93
6448 Author: Emilian Medve <Emilian.Medve@freescale.com>
6449 Date: Tue Jan 30 16:14:50 2007 -0600
6451 mpc83xx: Fix alternating tx error / tx buffer not ready bug in QE UEC
6453 The problem is not gcc4 but the code itself. The BD_STATUS() macro can't
6454 be used for busy-waiting since it strips the 'volatile' property from
6455 the bd variable. gcc3 was working by pure luck.
6457 This is a follow on patch to "Fix the UEC driver bug of QE"
6459 commit 3e78a31cfe3d3022f46f67eb88e1281d5cc2eb89
6460 Author: Kumar Gala <galak@kernel.crashing.org>
6461 Date: Tue Jan 30 14:08:30 2007 -0600
6463 mpc83xx: Replace CONFIG_MPC8349 and use CONFIG_MPC834X instead
6465 The code that is ifdef'd with CONFIG_MPC8349 is actually applicable to all
6466 MPC834X class processors. Change the protections from CONFIG_MPC8349 to
6467 CONFIG_MPC834X so they are more generic.
6469 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6471 commit ae246dc6c1937c291014eadd90b6d48c438c7cb0
6472 Author: Kim Phillips <kim.phillips@freescale.com>
6473 Date: Thu Jan 25 13:40:55 2007 -0600
6475 mpc83xx: add MPC832XEMDS and sbc8349 to MAKEALL
6477 commit 4decd84e8f04279c5cfff7f8e907465ef8d8a3fb
6478 Author: Kim Phillips <kim.phillips@freescale.com>
6479 Date: Wed Jan 24 17:18:37 2007 -0600
6481 mpc83xx: sort Makefile targets
6483 reordered targets alphabetically
6485 commit 91e25769771c1164ed63ffca0add49f934ae3343
6486 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
6487 Date: Tue Jan 16 11:38:14 2007 -0500
6489 mpc83xx: U-Boot support for Wind River SBC8349
6491 I've redone the SBC8349 support to match git-current, which
6492 incorporates all the MPC834x updates from Freescale since the 1.1.6
6493 release, including the DDR changes.
6495 I've kept all the SBC8349 files as parallel as possible to the
6496 MPC8349EMDS ones for ease of maintenance and to allow for easy
6497 inspection of what was changed to support this board. Hence the SBC8349
6498 U-Boot has FDT support and everything else that the MPC8349EMDS has.
6500 Fortunately the Freescale updates added support for boards using CS0,
6501 but I had to change spd_sdram.c to allow for board specific settings for
6502 the sdram_clk_cntl (it is/was hard coded to zero, and that remains the
6503 default if the board doesn't specify a value.)
6505 Hopefully this should be mergeable as-is and require no whitespace
6506 cleanups or similar, but if something doesn't measure up then let me
6507 know and I'll fix it.
6512 commit 05031db456ab227f3e3752f37b9b812b65bb83ad
6513 Author: Sam Song <samsongshu@yahoo.com.cn>
6514 Date: Thu Dec 14 19:03:21 2006 +0800
6516 mpc83xx: Remove a redundant semicolon in mpc8349itx.c
6518 A redundant semicolon existed in mpc8349itx.c
6521 Signed-off-by: Sam Song <samsongshu@yahoo.com.cn>
6523 commit f35f358241c549be3f75cfe2eaa642914275b7ba
6524 Author: Jerry Van Baren <gerald.vanbaren@comcast.net>
6525 Date: Wed Dec 6 21:23:55 2006 -0500
6527 mpc83xx: Put the version (and magic) after the HRCW.
6529 Put the version (and magic) after the HRCW. This puts it in a fixed
6530 location in flash, not at the start of flash but as close as we can get.
6532 Signed-off-by: Jerry Van Baren <vanbaren@cideas.com>
6534 commit 48aecd969171a6e99a55fae04933857787f9a5bd
6535 Author: Dave Liu <r63238@freescale.com>
6536 Date: Thu Dec 7 21:14:51 2006 +0800
6538 mpc83xx: Add the MPC832XEMDS board readme
6540 Add the MPC832XEMDS board readme
6542 Signed-off-by: Dave Liu <daveliu@freescale.com>
6544 commit 24c3aca3f1358b113d3215adb5433b156e99f72b
6545 Author: Dave Liu <r63238@freescale.com>
6546 Date: Thu Dec 7 21:13:15 2006 +0800
6548 mpc83xx: Add support for the MPC832XEMDS board
6550 This patch supports DUART, ETH3/4 and PCI etc.
6552 Signed-off-by: Dave Liu <daveliu@freescale.com>
6554 commit e080313c32322e15ab5a18eb896a252858c57284
6555 Author: Dave Liu <r63238@freescale.com>
6556 Date: Thu Dec 7 21:11:58 2006 +0800
6558 mpc83xx: streamline the 83xx immr head file
6560 For better format and style, I streamlined the 83xx head files,
6561 including immap_83xx.h and mpc83xx.h. In the old head files, 1)
6562 duplicated macro definition appear in the both files; 2) the structure
6563 of QE immr is duplicated in the immap_83xx.h and immap_qe.h; 3) The
6564 macro definition put inside the each structure. So, I cleaned up the
6565 structure of QE immr from immap_83xx.h, deleted the duplicated stuff and
6566 moved the macro definition to mpc83xx.h, Just like MPC8260.
6570 *streamline the 83xx immr head file
6572 Signed-off-by: Dave Liu <daveliu@freescale.com>
6574 commit ddd02492f43db5408f5ab9f823b0ba5796e28ef0
6575 Author: Dave Liu <r63238@freescale.com>
6576 Date: Wed Dec 6 11:38:17 2006 +0800
6578 mpc83xx: Fix the UEC driver bug of QE
6580 The patch prevents the GCC tool chain from striping useful code for
6581 optimization. It will make UEC ethernet driver workable, Otherwise the
6582 UEC will fail in tx when you are using gcc4.x. but the driver can work
6583 when using gcc3.4.3.
6587 *Prevent the GCC from striping code for optimization, Otherwise the UEC
6588 will tx failed when you are using gcc4.x.
6590 Signed-off-by: Dave Liu <daveliu@freescale.com>
6592 commit ba58e4c9a9a917ce795dd16d4ec8d515f9f7aa35
6593 Author: Stefan Roese <sr@denx.de>
6594 Date: Thu Mar 1 21:11:36 2007 +0100
6596 [PATCH] Update AMCC Katmai 440SPe eval board support
6598 This patch updates the recently added Katmai board support. The biggest
6599 change is the support of ECC DIMM modules in the 440SP(e) SPD DDR2
6602 Please note, that still some problems are left with some memory
6603 configurations. See the driver for more details.
6605 Signed-off-by: Stefan Roese <sr@denx.de>
6607 commit 8c12045a3b06c5b6675d3fe02fbc9f545988129a
6608 Author: Stefan Roese <sr@denx.de>
6609 Date: Thu Mar 1 07:03:25 2007 +0100
6611 [PATCH] I2C: Add missing default CFG_RTC_BUS_NUM & CFG_DTT_BUS_NUM
6613 Signed-off-by: Stefan Roese <sr@denx.de>
6615 commit ccbc7036648e465697ca298ba51e0e76dda352a0
6616 Author: Wolfgang Denk <wd@pollux.denx.de>
6617 Date: Wed Feb 28 01:28:53 2007 +0100
6619 SC3: fix typo in default environment
6621 commit e344568b1b46af85ec32d815586f91bc115d6223
6622 Author: Sergei Poselenov <sposelenov@emcraft.com>
6623 Date: Tue Feb 27 20:15:30 2007 +0300
6625 MCC200: Fixes for update procedure
6627 - fix logic error in image type handling
6628 - make sure file system images (cramfs etc.) get stored in flash
6629 with image header stripped so they can be mounted through MTD
6631 commit 743571145b37182757d4e688a77860b36ee77573
6632 Author: Wolfgang Denk <wd@pollux.denx.de>
6633 Date: Tue Feb 27 14:26:04 2007 +0100
6637 commit 638dd1458bbdc2a55d4b9e25c5c4e1f838a5dc72
6638 Author: Sergei Poselenov <sposelenov@emcraft.com>
6639 Date: Tue Feb 27 12:40:16 2007 +0300
6641 MCC200 update - add LCD Progress Indicator
6643 commit 6c7cac8c4fce0ea2bf8e15ed8658d87974155b44
6644 Author: Stefan Roese <sr@denx.de>
6645 Date: Thu Feb 22 07:43:34 2007 +0100
6647 [PATCH] get_dev() now unconditionally uses manual relocation
6649 Since the relocation fix is not included yet and we're not sure how
6650 it will be added, this patch removes code that required relocation
6651 to be fixed for now.
6653 Signed-off-by: Stefan Roese <sr@denx.de>
6655 commit 8274ec0bd01d2feb2c7f095eba78d42ea009798b
6656 Author: Stefan Roese <sr@denx.de>
6657 Date: Thu Feb 22 07:40:23 2007 +0100
6659 [PATCH] Change systemace driver to select 8 & 16bit mode
6661 As suggested by Grant Likely this patch enables the Xilinx SystemACE
6662 driver to select 8 or 16bit mode upon startup.
6664 Signed-off-by: Stefan Roese <sr@denx.de>
6666 commit 3a197b2fe49d6fa03978e60af2394efe9c70b527
6667 Author: Haiying Wang <Haiying.Wang@freescale.com>
6668 Date: Wed Feb 21 16:52:31 2007 +0100
6670 [PATCH v3] Add sync to ensure flash_write_cmd is fully finished
6672 Some CPUs like PPC, BLACKFIN need sync() to ensure cfi flash write command
6673 is fully finished. The sync() is defined in each CPU's io.h file. For
6674 those CPUs which do not need sync for now, a dummy sync() is defined in
6677 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
6679 commit da04995c7dc6772013a9a0dc5c767f190c402478
6680 Author: Stefan Roese <sr@denx.de>
6681 Date: Wed Feb 21 13:44:34 2007 +0100
6683 [PATCH] Fix problem in systemace driver (ace_writew instead of ace_write)
6685 Signed-off-by: Stefan Roese <sr@denx.de>
6687 commit 751bb57107d78978ae08e697c3deba816f5be091
6688 Author: Stefan Roese <sr@denx.de>
6689 Date: Tue Feb 20 13:21:57 2007 +0100
6691 [PATCH] Fix relocation problem with "new" get_dev() function
6693 This patch enables the "new" get_dev() function for block devices
6694 introduced by Grant Likely to be used on systems that still suffer
6695 from the relocation problems (manual relocation neede because of
6696 problems with linker script).
6698 Hopefully we can resolve this relocation issue soon for all platform
6699 so we don't need this additional code anymore.
6701 Signed-off-by: Stefan Roese <sr@denx.de>
6703 commit d93e2212f962668b3dce091ff5edc33f2347fe37
6704 Author: Stefan Roese <sr@denx.de>
6705 Date: Tue Feb 20 13:17:42 2007 +0100
6707 [PATCH] Update SystemACE driver for 16bit access
6709 This patch removes some problems when the Xilinx SystemACE driver
6710 is used with 16bit access on an big endian platform (like the
6713 Signed-off-by: Stefan Roese <sr@denx.de>
6715 commit 874bb7b88fe9b4648e1288a387af2e31014a72f3
6716 Author: Stefan Roese <sr@denx.de>
6717 Date: Tue Feb 20 13:15:40 2007 +0100
6719 [PATCH] Clean up Katmai (440SPe) linker script
6721 Signed-off-by: Stefan Roese <sr@denx.de>
6723 commit 4745acaa1a603b67f6b9b7970365ebadd7d6586f
6724 Author: Stefan Roese <sr@denx.de>
6725 Date: Tue Feb 20 10:57:08 2007 +0100
6727 [PATCH] Add support for the AMCC Katmai (440SPe) eval board
6729 Signed-off-by: Stefan Roese <sr@denx.de>
6731 commit 0dc018ece13effc689e47479ea9ebf1c98a507f5
6732 Author: Stefan Roese <sr@denx.de>
6733 Date: Tue Feb 20 10:51:26 2007 +0100
6735 [PATCH] I2C: Add support for multiple I2C busses for RTC & DTT
6737 This patch switches to the desired I2C bus when the date/dtt
6738 commands are called. This can be configured using the
6739 CFG_RTC_BUS_NUM and/or CFG_DTT_BUS_NUM defines.
6741 Signed-off-by: Stefan Roese <sr@denx.de>
6743 commit 4037ed3b63923cfcec27f784a89057c3cbabcedb
6744 Author: Stefan Roese <sr@denx.de>
6745 Date: Tue Feb 20 10:43:34 2007 +0100
6747 [PATCH] PPC4xx: Add 440SP(e) DDR2 SPD DIMM support
6749 This patch adds support for the DDR2 controller used on the
6750 440SP and 440SPe. It is tested on the Katmai (440SPe) eval
6751 board and works fine with the following DIMM modules:
6753 - Corsair CM2X512-5400C4 (512MByte per DIMM)
6754 - Kingston ValueRAM KVR667D2N5/512 (512MByte per DIMM)
6755 - Kingston ValueRAM KVR667D2N5K2/2G (1GByte per DIMM)
6757 This patch also adds the nice functionality to dynamically
6758 create the TLB entries for the SDRAM (tlb.c). So we should
6759 never run into such problems with wrong (too short) TLB
6760 initialization again on these platforms.
6762 Signed-off-by: Stefan Roese <sr@denx.de>
6764 commit 36d830c9830379045f5daa9f542ac1c990c70068
6765 Author: Stefan Roese <sr@denx.de>
6766 Date: Tue Feb 20 10:35:42 2007 +0100
6768 [PATCH] PPC4xx: Split 4xx SPD SDRAM init routines into 2 files
6770 Since the existing 4xx SPD SDRAM initialization routines for the
6771 405 SDRAM controller and the 440 DDR controller don't have much in
6772 common this patch splits both drivers into different files.
6774 This is in preparation for the 440 DDR2 controller support (440SP/e).
6776 Signed-off-by: Stefan Roese <sr@denx.de>
6778 commit 79b2d0bb2eae09602448f7a7cb56530d2f31e6c6
6779 Author: Stefan Roese <sr@denx.de>
6780 Date: Tue Feb 20 10:27:08 2007 +0100
6782 [PATCH] PPC4xx: Add support for multiple I2C busses
6784 This patch adds support for multiple I2C busses on the PPC4xx
6785 platforms. Define CONFIG_I2C_MULTI_BUS in the board config file
6786 to make use of this feature.
6788 It also merges the 405 and 440 i2c header files into one common
6791 Also the 4xx i2c reset procedure is reworked since I experienced
6792 some problems with the first access on the 440SPe Katmai board.
6794 Signed-off-by: Stefan Roese <sr@denx.de>
6796 commit eb867a76238fb38e952c37871b16d0d7fd61c95f
6797 Author: Grant Likely <grant.likely@secretlab.ca>
6798 Date: Tue Feb 20 09:05:45 2007 +0100
6800 [PATCH 9_9] Use "void *" not "unsigned long *" for block dev read_write buffer pointers
6802 Block device read/write is anonymous data; there is no need to use a
6803 typed pointer. void * is fine. Also add a hook for block_read functions
6805 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
6807 commit 53758fa20e935cc87eeb0519ed365df753a6f289
6808 Author: Grant Likely <grant.likely@secretlab.ca>
6809 Date: Tue Feb 20 09:05:38 2007 +0100
6811 [PATCH 8_9] Add block_write hook to block_dev_desc_t
6813 Preparation for future patches which support block device writing
6815 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
6817 commit f4852ebe6ca946a509667eb68be42026f837be76
6818 Author: Grant Likely <grant.likely@secretlab.ca>
6819 Date: Tue Feb 20 09:05:31 2007 +0100
6821 [PATCH 7_9] Replace ace_readw_ace_writeb functions with macros
6823 Register read/write does not need to be wrapped in a full function. The
6824 patch replaces them with macros.
6826 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
6828 commit 3a8ce9af6fcb5744a7851b4440c07688acc40844
6829 Author: Grant Likely <grant.likely@secretlab.ca>
6830 Date: Tue Feb 20 09:05:23 2007 +0100
6832 [PATCH 6_9] Move common_cmd_ace.c to drivers_systemace.c
6834 The code in this file is not a command; it is a device driver. Put it in
6835 the correct place. There are zero functional changes in this patch, it
6836 only moves the file.
6838 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
6840 commit 984618f3e7794c783ec8d1511e74c6ee2d69bfe4
6841 Author: Grant Likely <grant.likely@secretlab.ca>
6842 Date: Tue Feb 20 09:05:16 2007 +0100
6844 [PATCH 5_9] Whitespace fixup on common_cmd_ace.c (using Lindent)
6846 This patch is in preparation of additional changes to the sysace driver.
6847 May as well take this opportunity to fixup the inconsistent whitespace since
6848 this file is about to undergo major changes anyway.
6850 There are zero functional changes in this patch. It only cleans up the
6853 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
6855 commit 80ba981d940471fe7e539e64fa3d2bd80002beda
6856 Author: Grant Likely <grant.likely@secretlab.ca>
6857 Date: Tue Feb 20 09:05:07 2007 +0100
6859 [PATCH 4_4] Remove local implementation of isprint() in ft_build.c
6861 isprint is already defined in ctype.c
6863 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
6865 commit c95c4280d751ca078c2ff58228d2f2b44ccf0600
6866 Author: Grant Likely <grant.likely@secretlab.ca>
6867 Date: Tue Feb 20 09:05:00 2007 +0100
6869 [PATCH 3_9] Move buffer print code from md command to common function
6871 Printing a buffer is a darn useful thing. Move the buffer print code
6872 into print_buffer() in lib_generic/
6874 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
6876 commit 99b0f0fd3fbf2572ae1a7723dd90cffc8e85130a
6877 Author: Grant Likely <grant.likely@secretlab.ca>
6878 Date: Tue Feb 20 09:04:52 2007 +0100
6880 [PATCH 2_4] Use config.h, not xparameters.h, for xilinx targets
6882 Change the xilinx device drivers and board code to include config.h
6883 instead of xparameters.h directly. config.h always includes the
6884 correct xparameters file. This change reduces the posibility of
6885 including the wrong file when adding a new xilinx board port
6887 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
6889 commit 735dd97b1b20e777d059c7b389fe9d70cd3f80c7
6890 Author: Grant Likely <grant.likely@secretlab.ca>
6891 Date: Tue Feb 20 09:04:34 2007 +0100
6893 [PATCH 1_4] Merge common get_dev() routines for block devices
6895 Each of the filesystem drivers duplicate the get_dev routine. This change
6896 merges them into a single function in part.c
6898 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
6900 commit f5fcc3c20b65554e98a165542c36ee0c610a2d81
6901 Author: Wolfgang Denk <wd@pollux.denx.de>
6902 Date: Mon Feb 19 23:09:51 2007 +0100
6904 MCC200: Software Updater: allow both "ramdisk" and "filesystem" types
6905 as root file system images.
6907 commit 489c696ae7211218961d159e43e722d74c36fcbc
6908 Author: Sergei Poselenov <sposelenov@emcraft.com>
6909 Date: Wed Feb 14 14:30:28 2007 +0300
6911 MCC200: Extensions to Software Update Mechanism
6913 Update / extend Software Update Mechanism for MCC200 board:
6915 - Add support for rootfs image added. The environment variables
6916 "rootfs_st" and "rootfs_nd" can be used to override the default
6917 values of the image start and end.
6918 - Remove excessive key check code.
6921 commit 4be23a12f23f1372634edc3215137b09768b7949
6922 Author: Stefan Roese <sr@denx.de>
6923 Date: Mon Feb 19 08:23:15 2007 +0100
6925 [PATCH] Update Sequoia EBC configuration (NOR FLASH)
6927 As spotted by Matthias Fuchs, the READY input should not be
6928 enabled for the NOR FLASH on the Sequoia board.
6930 Signed-off-by: Stefan Roese <sr@denx.de>
6932 commit 2605e90bf676d48123afe5719a846d2b52b24aac
6933 Author: Heiko Schocher <hs@pollux.denx.de>
6934 Date: Fri Feb 16 07:57:42 2007 +0100
6936 [PATCH] Added support for the jupiter board.
6938 Signed-off-by: Heiko Schocher <hs@denx.de>
6940 commit 497d012e5be0194e1084073d0081eb1a844796b2
6941 Author: Gary Jennejohn <garyj@pollux.denx.de>
6942 Date: Mon Feb 12 13:11:50 2007 +0100
6944 LPC2292: patch from Siemens.
6946 commit b0b1a920aebead0d44146e73676ae9d80fffc8e2
6947 Author: Stefan Roese <sr@denx.de>
6948 Date: Sat Feb 10 08:49:31 2007 +0100
6950 [PATCH] Add missing p3mx.h file to repository (ups)
6952 Signed-off-by: Stefan Roese <sr@denx.de>
6954 commit 53d4a4983fb9b3ae5f7b2f10c599aca2b1b4034a
6955 Author: Bartlomiej Sieka <tur@semihalf.com>
6956 Date: Fri Feb 9 10:45:42 2007 +0100
6958 [Motion-PRO] Preliminary support for the Motion-PRO board.
6960 commit 5a753f98c6a01bd1c61a9a3f95e8329a35f62994
6961 Author: Stefan Roese <sr@denx.de>
6962 Date: Wed Feb 7 16:51:08 2007 +0100
6964 [PATCH] Update some AMCC 4xx board config files (set initrd_high)
6966 Some boards that can have more than 768MBytes of SDRAM need to
6967 set "initrd_high", so that the initrd can be accessed by the
6970 Signed-off-by: Stefan Roese <sr@denx.de>
6972 commit 7372ca68227930d03cffa548310524cad5b96733
6973 Author: Stefan Roese <sr@denx.de>
6974 Date: Fri Feb 2 12:44:22 2007 +0100
6976 [PATCH] Correctly display PCI arbiter en-/disabled on some 4xx boards
6978 Previously the strapping DCR/SDR was read to determine if the internal PCI
6979 arbiter is enabled or not. This strapping bit can be overridden, so now
6980 the current status is read from the correct DCR/SDR register.
6982 Signed-off-by: Stefan Roese <sr@denx.de>
6984 commit 2aa54f651a42d198673318f07a20c89a43e4d197
6985 Author: Stefan Roese <sr@denx.de>
6986 Date: Fri Feb 2 12:42:08 2007 +0100
6988 [PATCH] Change configuration output of Sycamore, Yellowstone & Rainier
6990 Signed-off-by: Stefan Roese <sr@denx.de>
6992 commit 23744d6b5bf17592eb6a0ef4f318f6089f55993b
6993 Author: Stefan Roese <sr@denx.de>
6994 Date: Thu Feb 1 13:22:41 2007 +0100
6996 [PATCH] Remove PCI-PNP configuration from Sequoia/Rainier config file
6998 When PCI PNP is enabled the pci pnp configuration routine is called
6999 which sets the PCI_CACHE_SIZE_LINE to 8. This seems to generate some
7000 problems with some PCI cards. For now disable the PCI PNP configuration.
7002 Signed-off-by: Stefan Roese <sr@denx.de>
7004 commit 2902fadade3be7659467e8d074048c6b7068f5c0
7005 Author: Stefan Roese <sr@denx.de>
7006 Date: Wed Jan 31 16:56:10 2007 +0100
7008 [PATCH] Update 440EPx/440GRx cpu detection
7010 Signed-off-by: Stefan Roese <sr@denx.de>
7012 commit d5ea287b02a6945c3977410e364a879dd1a555c8
7013 Author: Stefan Roese <sr@denx.de>
7014 Date: Wed Jan 31 16:38:04 2007 +0100
7016 [PATCH] Update esd cpci5200 files
7018 Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
7020 commit 8b7d1f0ab7d7c4fe3160bbf74a7e9690d9f3a3ab
7021 Author: Stefan Roese <sr@denx.de>
7022 Date: Wed Jan 31 16:37:34 2007 +0100
7024 [PATCH] Add support for esd mecp5200 board
7026 Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
7028 commit 71a4e5fda8b60044ab9f46069fa1cfa26bdd07ff
7029 Author: Stefan Roese <sr@denx.de>
7030 Date: Wed Jan 31 12:38:50 2007 +0100
7032 [PATCH] Remove unneccessary yellowstone board config file
7034 Signed-off-by: Stefan Roese <sr@denx.de>
7036 commit e802594b6fa1b166308820c276b96dc0d7cc731c
7037 Author: Stefan Roese <sr@denx.de>
7038 Date: Tue Jan 30 17:06:10 2007 +0100
7040 [PATCH] Update Sequoia (440EPx) config file
7042 The config file now handles the 2nd target, the Rainier (440GRx)
7043 evaluation board better. Additionally the PPC input clock was
7044 adjusted to match the correct value of 33.0 MHz.
7046 Signed-off-by: Stefan Roese <sr@denx.de>
7048 commit 700200c67e73b83751418abe7815840dca8fd6cb
7049 Author: Stefan Roese <sr@denx.de>
7050 Date: Tue Jan 30 17:04:19 2007 +0100
7052 [PATCH] Merge Yosemite & Yellowstone board ports
7054 Now the AMCC eval boards Yosemite (440EP) and Yellowstone (440GR)
7055 share one config file and all board specific files. This way we
7056 don't have to maintain two different sets of files for nearly
7059 Signed-off-by: Stefan Roese <sr@denx.de>
7061 commit 1bbf5eae322f5f1f6427ecc3ac13a0cb7dba8ad6
7062 Author: Stefan Roese <sr@denx.de>
7063 Date: Tue Jan 30 15:01:49 2007 +0100
7065 [PATCH] Update Prodrive SCPU (PDNB3 variant) board
7067 SCPU doesn't use redundant environment in flash.
7069 Signed-off-by: Stefan Roese <sr@denx.de>
7071 commit 6304430ed642ea8fa15c9e5af965ac2e033eec45
7072 Author: Stefan Roese <sr@denx.de>
7073 Date: Tue Jan 30 12:51:07 2007 +0100
7075 [PATCH] alpr: Update alpr board config file
7077 Signed-off-by: Stefan Roese <sr@denx.de>
7079 commit f8db84f132b1e335f20f96138a1f09ed97b08664
7080 Author: Wolfgang Denk <wd@pollux.denx.de>
7081 Date: Tue Jan 30 00:50:40 2007 +0100
7083 LPC2292 SODIMM port coding style cleanup.
7085 commit 6bd2447ee47ee23c18d2b3c7ccd5a20f7626f5b3
7086 Author: Gary Jennejohn <garyj@pollux.denx.de>
7087 Date: Wed Jan 24 12:16:56 2007 +0100
7089 Add port for the lpc2292sodimm evaluation board from EmbeddedArtists
7091 commit 2daf046ba627f85f44195815778140039636244e
7092 Author: Bartlomiej Sieka <tur@semihalf.com>
7093 Date: Tue Jan 23 17:22:06 2007 +0100
7095 [iDMR] Add MTD and JFFS2 support, also add default partition definition.
7097 commit f7db33101fbc9c8f0a10738ce87034875a17aeb9
7098 Author: Bartlomiej Sieka <tur@semihalf.com>
7099 Date: Tue Jan 23 14:21:14 2007 +0100
7101 [iDMR] Flash driver on initialisation write-protects some sectors,
7102 currently sectors 0-3. Sector 3 does not need to be protected, though
7103 (U-boot occupies sectors 0-1 and the environment sector 2). This commit
7104 fixes this, i.e., only sectors 0-2 are protected.
7106 commit 0ed47bb119cd2c4c16edb2548789148f9e6dc9de
7107 Author: Bartlomiej Sieka <tur@semihalf.com>
7108 Date: Tue Jan 23 14:11:22 2007 +0100
7110 [iDMR] Using MII-related commands on iDRM board doesn't work now (e.g.,
7111 "mii device" results in "Unexpected exception"). Fixing this properly
7112 requires some clean-up in the FEC drivers infrastructure for ColdFire, so
7113 this commit disables MII commads for now.
7115 commit 363d1d8f9c99b63daef81f5985cab3fc00edde5c
7116 Author: Bartlomiej Sieka <tur@semihalf.com>
7117 Date: Tue Jan 23 13:25:22 2007 +0100
7119 [ColdFire MCF5271 family] Add CPU detection based on the value of Chip
7120 Identification Register (CIR).
7122 commit fdef388758506765d4d6a7155c8f1584c63ff581
7123 Author: roy zang <tie-fei.zang@freescale.com>
7124 Date: Mon Jan 22 13:19:21 2007 +0800
7126 use CFG_WRITE_SWAPPED_DATA define instead of define CFG_FLASH_CFI_SWAP
7127 The patch by Heiko Schocher <hs@pollux.denx.de> on Jan, 19, 2007
7128 fixes cfi_driver bug for mpc7448hpc2 board. The default cfi_driver can support
7131 commit a4012396645533aef218354eeba754dff0deace8
7132 Author: Wolfgang Denk <wd@pollux.denx.de>
7133 Date: Fri Jan 19 23:08:39 2007 +0100
7137 commit f539b7ba7d7ef6dd187c8209609001cb1cd95e39
7138 Author: Heiko Schocher <hs@pollux.denx.de>
7139 Date: Fri Jan 19 19:57:10 2007 +0100
7141 [PATCH] SC3 board: added CFG_CMD_AUTOSCRIPT.
7143 Signed-off-by: Heiko Schocher <hs@denx.de>
7145 commit d0b6e14087ddd8789f224a48e1d33f2a5df4d167
7146 Author: Heiko Schocher <hs@pollux.denx.de>
7147 Date: Fri Jan 19 18:05:26 2007 +0100
7149 [PATCH] CFI: define CFG_WRITE_SWAPPED_DATA for the CFI-Flash driver
7150 if you must swap the bytes between reading/writing.
7151 (Needed for the SC3 board)
7153 Signed-off-by: Heiko Schocher <hs@denx.de>
7155 commit 9d8d5a5bfb64768f29a0cb47fc37cd6f4c40e276
7156 Author: Stefan Roese <sr@denx.de>
7157 Date: Thu Jan 18 16:05:47 2007 +0100
7159 [PATCH] Add support for Prodrive SCPU (PDNB3 variant) board
7161 Signed-off-by: Stefan Roese <sr@denx.de>
7163 commit 0057d758e3e874cbe7f24745d0cce8c1cb6c207e
7164 Author: Stefan Roese <sr@denx.de>
7165 Date: Thu Jan 18 11:54:52 2007 +0100
7167 [PATCH] Update Prodrive P3Mx support
7169 Signed-off-by: Stefan Roese <sr@denx.de>
7171 commit 34167a36c29ee946b727465db5c014746a08e978
7172 Author: Stefan Roese <sr@denx.de>
7173 Date: Thu Jan 18 11:48:10 2007 +0100
7175 [PATCH] Add missing Taishan config file
7177 Signed-off-by: Stefan Roese <sr@denx.de>
7179 commit cb4820725e9fc409c5cbc8e83054a6ed522d2111
7180 Author: Heiko Schocher <hs@pollux.denx.de>
7181 Date: Thu Jan 18 11:28:51 2007 +0100
7183 [PATCH] Fix: Compilerwarnings for SC3 board.
7184 The EBC Configuration Register is now by CFG_EBC_CFG definable
7185 Added JFFS2 support for the SC3 board.
7187 Signed-off-by: Heiko Schocher <hs@denx.de>
7189 commit 5fb692cae57d1710c8f52a427cf7f39a37383fcd
7190 Author: Stefan Roese <sr@denx.de>
7191 Date: Thu Jan 18 10:25:34 2007 +0100
7193 [PATCH] Add support for AMCC Taishan PPC440GX eval board
7195 Signed-off-by: Stefan Roese <sr@denx.de>
7197 commit 6d3e0107235aa0e6a6dcb77f9884497280bf85ad
7198 Author: Wolfgang Denk <wd@pollux.denx.de>
7199 Date: Tue Jan 16 18:30:50 2007 +0100
7201 Raname solidcard3 into sc3; add redundant env for sc3
7203 commit 1bbbbdd20fcec9933697000dcf55ff7972622596
7204 Author: Wolfgang Denk <wd@pollux.denx.de>
7205 Date: Tue Jan 16 12:46:35 2007 +0100
7207 Update default environment for Solidcard3
7209 commit 5a5c56986a9ccf71642c8b6374eb18487b15fecd
7210 Author: Stefan Roese <sr@denx.de>
7211 Date: Mon Jan 15 09:46:29 2007 +0100
7213 [PATCH] Fix 440SPe rev B detection from previous patch
7215 Signed-off-by: Stefan Roese <sr@denx.de>
7217 commit a443d31410c571ee8f970da819a44d698fdd6b1f
7218 Author: Heiko Schocher <hs@pollux.denx.de>
7219 Date: Sun Jan 14 13:35:31 2007 +0100
7221 [FIX] correct I2C Writes for the LM81 Sensor.
7223 Signed-off-by: Heiko Schocher <hs@denx.de>
7225 commit 0bba5452835f19a61204edcda3a58112fd8e2208
7226 Author: Wolfgang Denk <wd@pollux.denx.de>
7227 Date: Sat Jan 13 11:17:10 2007 +0100
7229 Undo commit 3033ebb2: reset command does not take any arguments
7231 Haiying Wang's modification to the reset command was broken, undo it.
7233 Signed-off-by: Wolfgang Denk <wd@denx.de>
7235 commit 95981778cff0038fd9941044d6a3eda810e33258
7236 Author: Stefan Roese <sr@denx.de>
7237 Date: Sat Jan 13 08:01:03 2007 +0100
7239 [PATCH] Update 440SP(e) cpu revisions
7241 Also display enabled/disabled RAID 6 support for 440SP/440SPe PPC's.
7243 Signed-off-by: Stefan Roese <sr@denx.de>
7245 commit 77ddc5b9afb325262fd88752ba430a1dded1f0c7
7246 Author: Stefan Roese <sr@denx.de>
7247 Date: Sat Jan 13 07:59:56 2007 +0100
7249 [PATCH] Update Yellowstone (440GR) to display board rev and PCI bus speed
7251 Now the board revision and the current PCI bus speed are printed after
7254 Also the EBC initialising is now done via defines in the board config
7257 Signed-off-by: Stefan Roese <sr@denx.de>
7259 commit 36adff362c2c0141ff8a810d42a7e478f779130f
7260 Author: Stefan Roese <sr@denx.de>
7261 Date: Sat Jan 13 07:59:19 2007 +0100
7263 [PATCH] Update Yosemite (440EP) to display board rev and PCI bus speed
7265 Now the board revision and the current PCI bus speed are printed after
7268 Also the EBC initialising is now done via defines in the board config
7271 Signed-off-by: Stefan Roese <sr@denx.de>
7273 commit e0b9ea8c8a294de6a5350ae638879d24b5b709d6
7274 Author: Stefan Roese <sr@denx.de>
7275 Date: Sat Jan 13 07:57:51 2007 +0100
7277 [PATCH] Update Sequoia (440EPx) to display board rev and PCI bus speed
7279 Now the board revision and the current PCI bus speed are printed after
7282 Signed-off-by: Stefan Roese <sr@denx.de>
7284 commit ca43ba18e910206ef8063e4b22d282630bff3fd2
7285 Author: Heiko Schocher <hs@pollux.denx.de>
7286 Date: Thu Jan 11 15:44:44 2007 +0100
7288 Added support for the SOLIDCARD III board from Eurodesign
7290 Signed-off-by: Heiko Schocher <hs@denx.de>
7292 commit 6abaee42621c07e81a2cd189ad4368b5e8c50280
7293 Author: Reinhard Thies <Reinhard.Thies@web.de>
7294 Date: Wed Jan 10 14:41:14 2007 +0100
7296 Adjusted default environment for cam5200 board.
7298 commit bab5a90d4ccc1a46a8127b867fa59028cc623ad9
7299 Author: Wolfgang Denk <wd@pollux.denx.de>
7300 Date: Wed Jan 10 15:35:52 2007 +0100
7304 commit 787fa15860a57833e50bd30555079a9cd4e519b8
7305 Author: Wolfgang Denk <wd@pollux.denx.de>
7306 Date: Wed Jan 10 01:28:39 2007 +0100
7308 Fix auto_update for MCC200 board.
7310 The invocation of do_auto_update() is moved to the end of the
7311 misc_init_r() function, after the flash mappings have been
7312 initialized. Please find attached a patch that implements that
7315 Also correct the decoding of the keypad status. With this update, the
7316 key that will trigger the update is Column 2, Row 2.
7318 commit d9384de2f571046e71081bae22b49e3d5ca2e3d5
7319 Author: Marian Balakowicz <m8@semihalf.com>
7320 Date: Wed Jan 10 00:26:15 2007 +0100
7322 CAM5200 flash driver modifications:
7323 - use CFI driver (replaces custom flash driver) for main 'cam5200' target
7324 - add second build target 'cam5200_niosflash' which still uses custom driver
7326 commit 67fea022fa957f59653b5238c7496f80a6b70432
7327 Author: Markus Klotzbuecher <mk@denx.de>
7328 Date: Tue Jan 9 16:02:48 2007 +0100
7330 SPC1920: cleanup memory contoller setup
7332 commit 8fc2102faa23593c80381437c09f7745a14deb40
7333 Author: Markus Klotzbuecher <mk@denx.de>
7334 Date: Tue Jan 9 14:57:14 2007 +0100
7336 Fix the cpu speed setup to work with all boards.
7338 commit 9295acb77481cf099ef9b40e1fa2d145b3c7490c
7339 Author: Markus Klotzbuecher <mk@denx.de>
7340 Date: Tue Jan 9 14:57:13 2007 +0100
7342 SPC1920: add support for the FM18L08 Ramtron FRAM
7344 commit 38ccd2fdf3364a53fe80e9b365303ecdafc9e223
7345 Author: Markus Klotzbuecher <mk@denx.de>
7346 Date: Tue Jan 9 14:57:13 2007 +0100
7348 SPC1920: update the HPI register addresses to work with the second
7349 generation of hardware
7351 commit 5921e5313fc3eadd42770c2b99badd7fae5ecf1e
7352 Author: Markus Klotzbuecher <mk@creamnet.de>
7353 Date: Tue Jan 9 14:57:13 2007 +0100
7355 Miscellanious spc1920 related cleanups
7357 commit e4c2d37adc8bb1bf69dcf600cbc6c75f916a6120
7358 Author: Markus Klotzbuecher <mk@denx.de>
7359 Date: Tue Jan 9 14:57:12 2007 +0100
7361 SPC1920 GO/NOGO led should be set to color red in U-Boot
7363 commit 0be62728aac459ba268d6d752ed49ec0e2bc7348
7364 Author: Markus Klotzbuecher <mk@creamnet.de>
7365 Date: Tue Jan 9 14:57:12 2007 +0100
7367 Add support for the DS3231 RTC
7369 commit 8139567b60d678584b05f0718a681f2047c5e14f
7370 Author: Markus Klotzbuecher <mk@creamnet.de>
7371 Date: Tue Jan 9 14:57:11 2007 +0100
7373 SMC1 uses external CLK4 instead of BRG on spc1920
7375 commit d8d9de1a02fbd880b613d607143d1f57342affc7
7376 Author: Markus Klotzbuecher <mk@creamnet.de>
7377 Date: Tue Jan 9 14:57:10 2007 +0100
7379 Update the SPC1920 CMB PLD driver
7381 commit 3f34f869162750e5e999fd140f884f5de952bcfe
7382 Author: Markus Klotzbuecher <mk@creamnet.de>
7383 Date: Tue Jan 9 14:57:10 2007 +0100
7385 Add / enable I2C support on the spc1920 board
7387 commit d28707dbce1e9ac2017ad051da4133bf22b4204f
7388 Author: Markus Klotzbuecher <mk@creamnet.de>
7389 Date: Tue Jan 9 14:57:10 2007 +0100
7391 Add support for the tms320671x host port interface (HPI)
7393 commit f4eb54529bb3664c3a562e488b460fe075f79d67
7394 Author: Wolfgang Denk <wd@pollux.denx.de>
7395 Date: Sun Jan 7 00:13:11 2007 +0100
7397 Prepare for release 1.2.0
7399 commit f07ae7a9daef27a3d0213a4f3fe39d5342173c02
7400 Author: Stefan Roese <sr@denx.de>
7401 Date: Sat Jan 6 15:58:09 2007 +0100
7403 [PATCH] 44x: Fix problem with DDR controller setup (refresh rate)
7405 This patch fixes a problem with an incorrect setup for the refresh
7406 timer of the 44x DDR controller in the file cpu/ppc4xx/sdram.c
7408 Signed-off-by: Stefan Roese <sr@denx.de>
7410 commit f16c1da9577f06c5fc08651a4065537407de4635
7411 Author: Stefan Roese <sr@denx.de>
7412 Date: Sat Jan 6 15:56:13 2007 +0100
7414 [PATCH] Update ALPR board files
7416 This update brings the ALPR board support to the newest version.
7417 It also fixes a problem with the NAND driver.
7419 Signed-off-by: Stefan Roese <sr@denx.de>
7421 commit cd1d937f90250a32988c37b2b4af8364d25de8ed
7422 Author: Stefan Roese <sr@denx.de>
7423 Date: Fri Jan 5 11:46:05 2007 +0100
7425 [PATCH] nand: Fix problem with oobsize calculation
7427 Here the description from Brian Brelsford <Brian_Brelsford@dell.com>:
7429 The Hynix part returns a 0x1d in the 4th ID byte. The Samsung part
7430 returns a 0x15. In the code fragment below bits [1:0] determine the
7431 page size, it is ANDed via "(extid & 0x3)" then shifted out. The
7432 next field is also ANDed with 0x3. However this is a one bit field
7433 as defined in the Hynix and Samsung parts in the 4th ID byte that
7434 determins the oobsize, not a two bit field. It works on Samsung as
7435 bits[3:2] are 01. However for the Hynix there is a 11 in these two
7436 bits, so the oob size gets messed up.
7438 I checked the correct linux code and the suggested fix from Brian is
7439 also available in the linux nand mtd driver.
7441 Signed-off-by: Stefan Roese <sr@denx.de>
7443 commit a78bc443ae5a4a8ba87590587d5e35bf5a787b2e
7444 Author: Stefan Roese <sr@denx.de>
7445 Date: Fri Jan 5 10:40:36 2007 +0100
7447 [PATCH] Clear PLB4A0_ACR[WRP] on Sequoia (440EPx)
7449 This fix will make the MAL burst disabling patch for the Linux
7450 EMAC driver obsolete.
7452 Signed-off-by: Stefan Roese <sr@denx.de>
7454 commit 023889838282b6237b401664f22dd22dfba2c066
7455 Author: Stefan Roese <sr@denx.de>
7456 Date: Fri Jan 5 10:38:05 2007 +0100
7458 [PATCH] Add DDR2 optimization code for Sequoia (440EPx) board
7460 This code will optimize the DDR2 controller setup on a board specific
7463 Note: This code doesn't work right now on the NAND booting image for the
7464 Sequoia board, since it doesn't fit into the 4kBytes for the SPL image.
7466 Signed-off-by: Stefan Roese <sr@denx.de>
7468 commit cce4acbb68398634b8d011ed7bb0d12269c84230
7469 Author: Bartlomiej Sieka <tur@semihalf.com>
7470 Date: Thu Dec 28 19:08:21 2006 +0100
7473 - fix a typo in V38B config file
7474 - move watchdog initialisation earlier in the boot process
7475 - add "wdt=off" to default kernel command line (disables kernel watchdog)
7477 commit 92eb729bad876725aeea908d2addba0800620840
7478 Author: Wolfgang Denk <wd@pollux.denx.de>
7479 Date: Wed Dec 27 01:26:13 2006 +0100
7481 Fix bug in adaption of Stefano Babic's CFI driver patch.
7483 commit 9c0f42ecfe25f7ffce8ec7a815f03864d723ffe3
7484 Author: Wolfgang Denk <wd@pollux.denx.de>
7485 Date: Sun Dec 24 01:42:57 2006 +0100
7489 commit d784fdb05900ada3686d5778783e1fb328e9fb66
7490 Author: Stefano Babic <sbabic@denx.de>
7491 Date: Tue Dec 12 00:22:42 2006 +0100
7493 Fix cfi failure with Spansion Flash (Spansion Flash Devices have a different offset to go into CFI mode)
7495 commit 1b3c360c235dc684ec06c2d5f183f0a282ce45e2
7496 Author: Stefan Roese <sr@denx.de>
7497 Date: Fri Dec 22 14:29:40 2006 +0100
7499 [PATCH] Fix sequoia flash autodetection (finally correct)
7501 Now 32MByte and 64MByte FLASH is know to work and other
7502 configurations should work too.
7504 Signed-off-by: Stefan Roese <sr@denx.de>
7506 commit 82e5236a8b719543643fd26d5827938ab2b94818
7507 Author: Wolfgang Denk <wd@pollux.denx.de>
7508 Date: Fri Dec 22 10:30:26 2006 +0100
7510 Minor code cleanup; update CHANGELOG.
7512 commit fa23044564091f05d9695beb7b5b9a931e7f41a4
7513 Author: Heiko Schocher <hs@pollux.denx.de>
7514 Date: Thu Dec 21 17:17:02 2006 +0100
7516 Added support for the TQM8272 board from TQ
7518 Signed-off-by: Heiko Schocher <hs@denx.de>
7520 commit 6dedf3d49dd14c3bf541c8ecee7ffaac5f0e1d6c
7521 Author: Heiko Schocher <hs@pollux.denx.de>
7522 Date: Thu Dec 21 16:14:48 2006 +0100
7524 [PATCH] Add support for the UC101 board from MAN.
7526 Signed-off-by: Heiko Schocher <hs@denx.de>
7528 commit c84bad0ef60e7055ab0bd49b93069509cecc382a
7529 Author: Bartlomiej Sieka <tur@semihalf.com>
7530 Date: Wed Dec 20 00:29:43 2006 +0100
7532 Fix to make the baudrate changes immediate for the MCF52x2 family.
7534 commit daa6e418bcc0c717752e8de939c213c790286096
7535 Author: Bartlomiej Sieka <tur@semihalf.com>
7536 Date: Wed Dec 20 00:27:32 2006 +0100
7538 Preliminary support for the iDMR board (ColdFire).
7540 commit cdb97a6678826f85e7c69eae6a1c113d034c9b10
7541 Author: Andrei Safronov <safronov@pollux.denx.de>
7542 Date: Fri Dec 8 16:23:08 2006 +0100
7544 automatic update mechanism
7546 commit 9d27b3a0685ff99fc477983f315c04d49f657a8a
7547 Author: roy zang <tie-fei.zang@freescale.com>
7548 Date: Mon Dec 4 17:56:59 2006 +0800
7550 Slight code clean up.
7551 Add comments, delete duplicate define and remove spaces.
7552 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
7554 commit 4dbcd69e3e2776ea334590d5768e3692c5fae5c1
7555 Author: roy zang <tie-fei.zang@freescale.com>
7556 Date: Mon Dec 4 17:54:21 2006 +0800
7558 Introduce PLL_CFG[0:4] table for processor 7448/7447A/7455/7457. The original
7559 multiplier table can not refect the real PLL clock behavior of these
7560 processors. Please refer to the hardware specification for detailed
7561 information of the corresponding processors.
7562 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
7564 commit 4efe20c9579011d9987f62ed7d35ee8cdc1cf0e0
7565 Author: roy zang <tie-fei.zang@freescale.com>
7566 Date: Mon Dec 4 14:46:23 2006 +0800
7568 Remove the static MAC address, ip address, server ip, netmask and
7569 gateway ip for network setting.
7570 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
7572 commit 6f12c61cf31ed73d72ddfcfc712a854a3a177aaf
7573 Author: roy zang <tie-fei.zang@freescale.com>
7574 Date: Mon Dec 4 14:33:08 2006 +0800
7576 Remove the duplicate memory test code for mpc744ihpc2 board.
7577 If a memory test is needed, please use the functions in
7578 post/memory.c or memtest command.
7579 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
7581 commit c9c1eeed7dd193fa65fb194654132040d49d4d3a
7582 Author: roy zang <tie-fei.zang@freescale.com>
7583 Date: Fri Dec 1 19:01:25 2006 +0800
7585 Fix the exception occuring in RAM table search issue.
7586 The original search_one_table() function code can only processes the search
7587 for the exception occurring in FLASH/ROM, because the exception and fixup
7588 table usually locate in FLASH. If the exception address is also in
7589 FLASH, it will be OK.
7590 If the exception occurs in RAM, after the u-boot relocation, a
7591 relocation offset should be added.
7593 clean up the code in cpu/74xx_7xx/cpu.c
7595 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
7597 commit ee311214e0d216f904feea269599d0934bf71f23
7598 Author: roy zang <tie-fei.zang@freescale.com>
7599 Date: Fri Dec 1 11:47:36 2006 +0800
7601 Clean up the code according to codestyle:
7602 (1) remove some C++ comments.
7603 (2) remove trailing white space.
7604 (3) remove trailing empty line.
7605 (4) Indentation by table.
7606 (5) remove {} in one line condition.
7607 (6) add space before '(' in function call.
7608 Remove some weird printf () output.
7609 Add necessary comments.
7610 Modified Makefile to support building in a separate directory.
7612 commit dd520bf314c7add4183c5191692180f576f96b60
7613 Author: Wolfgang Denk <wd@pollux.denx.de>
7614 Date: Thu Nov 30 18:02:20 2006 +0100
7618 commit 8d9a8610b8256331132227e9e6585c6bd5742787
7619 Author: Wolfgang Denk <wd@pollux.denx.de>
7620 Date: Thu Nov 30 01:54:07 2006 +0100
7622 Code cleanup. Update CHANGELOG.
7624 commit 726e90aacf0b1ecb0e7055be574622fbe3e450ba
7625 Author: Grant Likely <grant.likely@secretlab.ca>
7626 Date: Wed Nov 29 16:23:42 2006 +0100
7628 [PATCH] [MPC52xx] Use IPB bus frequency for SOC peripherals
7630 The soc node of the mpc52xx needs to be loaded with the IPB bus frequency,
7631 not the XLB frequency.
7633 This patch depends on the previous patches for MPC52xx device tree support
7635 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
7636 Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
7638 commit 1eac2a71417b6675b11aace72102a2e7fde8f5c6
7639 Author: Stefan Roese <sr@denx.de>
7640 Date: Wed Nov 29 15:42:37 2006 +0100
7642 [PATCH] Add support for Prodrive P3M750 & P3M7448 (P3Mx) boards
7644 This patch adds support for the Prodrive P3M750 (PPC750 & MV64460)
7645 and the P3M7448 (MPC7448 & MV64460) PMC modules. Both modules are
7646 quite similar and share the same board directory "prodrive/p3mx"
7647 and the same config file "p3mx.h".
7649 Signed-off-by: Stefan Roese <sr@denx.de>
7651 commit 1bdd46832aeb569f5e04b1f20f64318525b6525a
7652 Author: Stefan Roese <sr@denx.de>
7653 Date: Wed Nov 29 12:53:15 2006 +0100
7655 [PATCH] common/cmd_elf.c: Enable loadaddr as parameter in bootvx command
7657 In the bootvx command the load address was only read from the env
7658 variable "loadaddr" and not optionally passed as paramter as described
7659 in the help. This is fixed with this patch. The behaviour is now the
7660 same as in the bootelf command.
7662 Signed-off-by: Stefan Roese <sr@denx.de>
7664 commit 4e26f1074c3ac1bd8fd094f0dc4a1c4a0b15a592
7665 Author: Stefan Roese <sr@denx.de>
7666 Date: Wed Nov 29 12:03:57 2006 +0100
7668 [PATCH] include/ppc440.h minor error affecting interrupts
7670 Fixed include/ppc440.c for UIC address Bug
7672 Corrects bug affecting the addresses for the universal interrupt
7673 controller UIC2 and UIC3 on the PPC440 Epx, GRx, and SPE chips.
7675 Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
7676 Signed-off-by: Stefan Roese <sr@denx.de>
7678 commit 1939d969443ccf316cab2bf32ab1027d4db5ba1a
7679 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
7680 Date: Tue Nov 28 16:17:27 2006 -0600
7682 Make fsl-i2c not conflict with SOFT I2C
7684 Signed-off-by: Timur Tabi <timur@freescale.com>
7686 commit 14198bf768fdc958e3c1afd2404e5262208e98d7
7687 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
7688 Date: Tue Nov 28 16:17:18 2006 -0600
7690 Fix I2C master address initialization.
7692 Signed-off-by: Timur Tabi <timur@freescale.com>
7694 commit cf3d045e51ca8dcc6cf759827140861d6ac25c04
7695 Author: Kim Phillips <kim.phillips@freescale.com>
7696 Date: Tue Nov 28 23:31:19 2006 -0600
7698 Assign maintainers for mpc8349emds and mpc8360emds
7700 Dave for mpc8360emds, and me for mpc8349emds.
7702 commit 1aa934c81b77f2080d3ca4b226eab67b17a33961
7703 Author: Kim Phillips <kim.phillips@freescale.com>
7704 Date: Tue Nov 28 23:28:33 2006 -0600
7706 Eliminate gcc 4 'used uninitialized' warnings in drivers/qe/uccf.c
7708 give initial values for reg_num, shift, p_cmxucr in ucc_set_clk_src
7709 since they are passed by reference to ucc_get_cmxucr_reg and assigned.
7711 commit e857a5bdb3954b896c0920cb9d8d2b1b9c107ce5
7712 Author: Timur Tabi <timur@freescale.com>
7713 Date: Tue Nov 28 12:09:35 2006 -0600
7715 mpc83xx: Miscellaneous code style fixes
7717 Implement various code style fixes and similar changes.
7719 Signed-off-by: Timur Tabi <timur@freescale.com>
7721 commit e59581c56ab5d6e0207ddac3b2c1d55cb36ec706
7722 Author: Stefan Roese <sr@denx.de>
7723 Date: Tue Nov 28 17:55:49 2006 +0100
7725 [PATCH] Enable the IceCube/lite5200 variants to pass a device tree to Linux.
7727 This patch adds the code and configuration necessary to boot with an
7728 arch/powerpc Linux kernel.
7730 Signed-off-by: Grant Likely <grant.likely@gmail.com>
7731 Acked-by: Jon Loeliger <jdl@freescale.com>
7733 commit e732faec95a83cb468b4850ae807c8301dde8f6a
7734 Author: Stefan Roese <sr@denx.de>
7735 Date: Tue Nov 28 16:09:24 2006 +0100
7737 [PATCH] PPC4xx: 440SP Rev. C detection added
7739 Signed-off-by: Stefan Roese <sr@denx.de>
7741 commit e7f3e9ff01fbd7fa72eb42a9675fbed6bc4736b0
7742 Author: Stefan Roese <sr@denx.de>
7743 Date: Tue Nov 28 11:04:45 2006 +0100
7745 [PATCH] nand: Fix patch merge problem
7747 Signed-off-by: Stefan Roese <sr@denx.de>
7749 commit 58e3b14c18ed3288ceef8d086946dbf3df64ccf2
7750 Author: Stefan Roese <sr@denx.de>
7751 Date: Tue Nov 28 11:04:45 2006 +0100
7753 [PATCH] nand: Fix patch merge problem
7755 Signed-off-by: Stefan Roese <sr@denx.de>
7757 commit 4f4b602ec7524a032bdf3c6d28c7f525a4a67eaa
7758 Author: Wolfgang Denk <wd@pollux.denx.de>
7759 Date: Mon Nov 27 22:53:53 2006 +0100
7763 commit f6e495f54cdb8fe340b9c03deab40ad746d52fae
7764 Author: Stefan Roese <sr@denx.de>
7765 Date: Mon Nov 27 17:43:25 2006 +0100
7767 [PATCH] 4xx_enet.c: Correct the setting of zmiifer register
7769 Patch below corrects the setting of the zmiifer register, it was
7770 overwritting the register rather than ORing the settings.
7772 Signed-off-by: Neil Wilson <NWilson@airspan.com>
7773 Signed-off-by: Stefan Roese <sr@denx.de>
7775 commit d1a72545296800b7e219f93104ad5836f0003d66
7776 Author: Stefan Roese <sr@denx.de>
7777 Date: Mon Nov 27 17:34:10 2006 +0100
7779 [PATCH] Select NAND embedded environment from board configuration
7781 The current NAND Bootloader setup forces the environment
7782 variables to be in line with the bootloader. This change
7783 enables the configuration to be made in the board include
7784 file instead so that it can be individually enabled.
7786 Signed-off-by: Nick Spence <nick.spence@freescale.com>
7787 Signed-off-by: Stefan Roese <sr@denx.de>
7789 commit 15784862857c3c2214498defcfed84ff137fb81e
7790 Author: Stefan Roese <sr@denx.de>
7791 Date: Mon Nov 27 17:22:19 2006 +0100
7793 [PATCH] nand_wait() timeout fixes
7795 Two fixes for the nand_wait() function in
7796 drivers/nand/nand_base.c:
7798 1. Use correct timeouts. The original timeouts in Linux
7799 source are 400ms and 20ms not 40s and 20s
7801 2. Return correct error value in case of timeout. 0 is
7804 Signed-off-by: Rui Sousa <rui.sousa@laposte.net>
7805 Signed-off-by: Stefan Roese <sr@denx.de>
7807 commit da5553b095bf04f4f109ad7e565dae3aba47b230
7808 Author: Stefan Roese <sr@denx.de>
7809 Date: Mon Nov 27 17:04:06 2006 +0100
7811 [PATCH] Allow CONFIG_OF_FLAT_TREE to boot a non-arch/powerpc kernel
7813 This patch allows an arch/ppc kernel to be booted by just passing 1 or 2
7814 arguments to bootm. It removes the getenv("disable_of") test that used
7815 to be used for this purpose.
7817 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
7818 Acked-by: Jon Loeliger <jdl@freescale.com>
7820 commit a9398e018593782c5fa7d0741955fc1256b34c1e
7821 Author: Wolfgang Denk <wd@pollux.denx.de>
7822 Date: Mon Nov 27 15:32:42 2006 +0100
7824 Minor code cleanup. Update CHANGELOG.
7826 commit 1729b92cde575476684bffe819d0b7791b57bff2
7827 Author: Stefan Roese <sr@denx.de>
7828 Date: Mon Nov 27 14:52:04 2006 +0100
7830 [PATCH] 4xx: Fix problem with board specific reset code (now for real)
7832 Signed-off-by: Stefan Roese <sr@denx.de>
7834 commit cc5ee8a92a0e3ca6f727af71b8fd206460c7afd7
7835 Author: Stefan Roese <sr@denx.de>
7836 Date: Mon Nov 27 14:49:51 2006 +0100
7838 [PATCH] alpr: remove unused board specific flash driver
7840 Signed-off-by: Stefan Roese <sr@denx.de>
7842 commit 1f94d162e2b5f0edc28d9fb11482502c44d218e1
7843 Author: Stefan Roese <sr@denx.de>
7844 Date: Mon Nov 27 14:48:41 2006 +0100
7846 [PATCH] 4xx: Fix problem with board specific reset code
7848 Signed-off-by: Stefan Roese <sr@denx.de>
7850 commit ec0c2ec725aec9524a177a77ce75559e644a931a
7851 Author: Stefan Roese <sr@denx.de>
7852 Date: Mon Nov 27 14:46:06 2006 +0100
7854 [PATCH] Remove testing 4xx enet PHY setup
7856 Signed-off-by: Stefan Roese <sr@denx.de>
7858 commit 1c2ce2262069510f31c7d3fd7efd3d58b8c0c148
7859 Author: Stefan Roese <sr@denx.de>
7860 Date: Mon Nov 27 14:12:17 2006 +0100
7862 [PATCH] Update Prodrive ALPR board support (440GX)
7864 Signed-off-by: Stefan Roese <sr@denx.de>
7866 commit 58b485776698c3d71ec5a215e392123b4c15afa3
7867 Author: Markus Klotzbuecher <mk@denx.de>
7868 Date: Mon Nov 27 11:51:21 2006 +0100
7870 Add a small README with information on the generic ohci driver.
7872 commit ae3b770e4eae8e98b6e9e29662e18c47fdf0171f
7873 Author: Markus Klotzbuecher <mk@denx.de>
7874 Date: Mon Nov 27 11:46:46 2006 +0100
7876 Fix some endianness issues related to the generic ohci driver
7878 commit 7b59b3c7a8ce2e4b567abf99c1cd667bf35b9418
7879 Author: Markus Klotzbuecher <mk@denx.de>
7880 Date: Mon Nov 27 11:44:58 2006 +0100
7882 Introduced the configuration option CONFIG_USB_OHCI_NEW in order to be able
7883 to choose between the old and the generic OHCI drivers.
7885 commit 53e336e9ffc51035bdc4e5867631b3378761b4df
7886 Author: Markus Klotzbuecher <mk@denx.de>
7887 Date: Mon Nov 27 11:43:09 2006 +0100
7889 Modified the mpc5xxx and the ppc4xx cpu to use the generic OHCI driver
7890 and adapted board configs TQM5200 and yosemite accordingly. This commit
7891 also makes the maximum number of root hub ports configurable
7892 (CFG_USB_OHCI_MAX_ROOT_PORTS).
7894 commit 78d620ebb5871d252270dedfad60c6568993b780
7895 Author: Wolfgang Denk <wd@atlas.denx.de>
7896 Date: Thu Nov 23 22:58:58 2006 +0100
7898 Updates for TQM5200 modules:
7899 - fix off-by-one error in board/tqm5200/cam5200_flash.c error message
7900 - simplify "udate" definitions
7902 commit 2053283304eeddf250d109e6791eb6fa4cad14f7
7903 Author: Stefan Roese <sr@denx.de>
7904 Date: Wed Nov 22 13:20:50 2006 +0100
7906 [PATCH] PPC4xx start.S: Fix for processor errata
7908 Fixed cpu/ppc4xx/start.S for 440EPx Errata: further corrects PPC440EPx
7909 errata 1.12: 440_33 by moving patch up in code.
7911 Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
7912 Signed-off-by: Stefan Roese <sr@denx.de>
7914 commit 4ef6251403f637841000e0fef9e832aa01339822
7915 Author: Stefan Roese <sr@denx.de>
7916 Date: Mon Nov 20 20:39:52 2006 +0100
7918 [PATCH] Update AMCC Sequoia config file to support 64MByte NOR FLASH
7920 Signed-off-by: Stefan Roese <sr@denx.de>
7922 commit e4bbd8da164b976d38616bd9c69c5e86e193cdf0
7923 Author: Wolfgang Denk <wd@pollux.denx.de>
7924 Date: Mon Nov 20 10:28:30 2006 +0100
7928 commit 260421a21e934a68d31fb6125b0fbd2631a8ca20
7929 Author: Stefan Roese <sr@denx.de>
7930 Date: Mon Nov 13 13:55:24 2006 +0100
7932 [PATCH] CFI driver AMD Command Set Top boot geometry reversal, etc. [Updated]
7934 * Adds support for AMD command set Top Boot flash geometry reversal
7935 * Adds support for reading JEDEC Manufacturer ID and Device ID
7936 * Adds support for displaying command set, manufacturer id and
7938 * Makes flinfo output to be consistent when CFG_FLASH_EMPTY_INFO defined
7939 * Removes outdated change history (refer to git log instead)
7941 Signed-off-by: Tolunay Orkun <listmember@orkun.us>
7942 Signed-off-by: Stefan Roese <sr@denx.de>
7944 commit b21b511d4c50408f4853f46f06b601272196223f
7945 Author: Wolfgang Denk <wd@pollux.denx.de>
7946 Date: Sun Nov 12 21:13:23 2006 +0100
7950 commit ce3f1a40c507afbab06c5eb58ccdc6713eda3245
7951 Author: Bartlomiej Sieka <tur@semihalf.com>
7952 Date: Sat Nov 11 22:48:22 2006 +0100
7954 Disable the watchdog in the default config for the V38B board.
7956 commit 44a47e6db2694841211f1c8fdbafd36992e9cd1a
7957 Author: Bartlomiej Sieka <tur@semihalf.com>
7958 Date: Sat Nov 11 22:43:00 2006 +0100
7960 Change the GPIO pin multiplexing configuration for V38B. The USB GPIO pin
7961 group is enabled for USB earlier (in cpu_init_f() instead of
7962 usb_lowlevel_init()).
7964 commit 91650b3e4de688038d4f71279c44858e3e2c6870
7965 Author: Wolfgang Denk <wd@pollux.denx.de>
7966 Date: Mon Nov 6 17:06:36 2006 +0100
7968 Sequential accesses to non-existent memory must be synchronized,
7969 at least on G2 cores.
7971 This fixes get_ram_size() problems on MPC5200 Rev. B boards.
7973 commit be5e61815d5a1fac290ce9c0ef09cb6a8e4288fa
7974 Author: Timur Tabi <timur@freescale.com>
7975 Date: Fri Nov 3 19:15:00 2006 -0600
7977 mpc83xx: Update 83xx to use fsl_i2c.c
7979 Update the 83xx tree to use I2C support in drivers/fsl_i2c.c. Delete
7980 cpu/mpc83xx/i2c.c, include/asm-ppc/i2c.h, and all references to those files.
7981 Added multiple I2C bus support to fsl_i2c.c.
7983 Signed-off-by: Timur Tabi <timur@freescale.com>
7985 commit d239d74b1c937984bc519083a8e7de373a390f06
7986 Author: Timur Tabi <timur@freescale.com>
7987 Date: Fri Nov 3 12:00:28 2006 -0600
7989 mpc83xx: Replace CFG_IMMRBAR with CFG_IMMR
7991 Replace all instances of CFG_IMMRBAR with CFG_IMMR, so that the 83xx
7992 tree matches the other 8xxx trees.
7994 Signed-off-by: Timur Tabi <timur@freescale.com>
7996 commit f7fb2e703ec9688541416962724adff70a7322cb
7997 Author: Kim Phillips <kim.phillips@freescale.com>
7998 Date: Thu Nov 2 19:47:11 2006 -0600
8000 mpc83xx: Lindent and clean up cpu/mpc83xx/speed.c
8002 commit 90f30a710a3c619b5405860a686c4ddfc495d4b6
8003 Author: Dave Liu <daveliu@freescale.com>
8004 Date: Thu Nov 2 18:05:50 2006 -0600
8006 mpc83xx: Fix the incorrect dcbz operation
8008 The 834x rev1.x silicon has one CPU5 errata.
8010 The issue is when the data cache locked with
8011 HID0[DLOCK], the dcbz instruction looks like no-op inst.
8013 The right behavior of the data cache is when the data cache
8014 Locked with HID0[DLOCK], the dcbz instruction allocates
8017 The 834x rev3.0 and later and 8360 have not this bug inside.
8019 So, when 834x rev3.0/8360 are working with ECC, the dcbz
8020 instruction will corrupt the stack in cache, the processor will
8023 However, the 834x rev1.x can work with ECC with these code,
8024 because the sillicon has this cache bug. The dcbz will not
8025 corrupt the stack in cache.
8026 Really, it is the fault code running on fault sillicon.
8028 This patch fix the incorrect dcbz operation. Instead of
8029 CPU FP writing to initialise the ECC.
8032 * Fix the incorrect dcbz operation instead of CPU FP
8033 writing to initialise the ECC memory. Otherwise, it
8034 will corrupt the stack in cache, The processor will checkstop
8037 Signed-off-by: Dave Liu <daveliu@freescale.com>
8039 commit bf0b542d6773a5a1cbce77691f009b06d9aeb57d
8040 Author: Kim Phillips <kim.phillips@freescale.com>
8041 Date: Wed Nov 1 00:10:40 2006 -0600
8043 mpc83xx: add OF_FLAT_TREE bits to 83xx boards
8045 add ft_pci_setup, OF_CPU, OF_SOC, OF_TBCLK, and
8046 STDOUT_PATH configuration bits to mpc8349emds,
8047 mpc8349itx, and mpc8360emds board code.
8049 redo environment to use bootm with the fdtaddr
8050 for booting ARCH=powerpc kernels by default,
8051 and provide default fdtaddr values.
8053 commit 48041365b3420589ad464ebc7752e0053538b729
8054 Author: Kim Phillips <kim.phillips@freescale.com>
8055 Date: Wed Nov 1 00:07:25 2006 -0600
8057 mpc83xx: change ft code to modify local-mac-address property
8059 Update 83xx OF code to update local-mac-address properties
8060 for ethernet instead of the obsolete 'address' property.
8062 commit 9ca880a250870a7d55754291b5591d2b5fe89b54
8063 Author: Timur Tabi <timur@freescale.com>
8064 Date: Tue Oct 31 21:23:16 2006 -0600
8066 mpc83xx: Fix dual I2C support for the MPC8349ITX, MPC8349EMDS, TQM834x, and MPC8360EMDS
8068 This patch also adds an improved I2C set_speed(), which handles all clock
8071 Signed-off-by: Timur Tabi <timur@freescale.com>
8073 commit ac4b5622ce050b5ee1e154b98df630d778661632
8074 Author: Dave Liu <daveliu@freescale.com>
8075 Date: Tue Oct 31 19:54:59 2006 -0600
8077 mpc83xx: add the README.mpc8360emds
8079 add doc/README.mpc8360emds to accompany the new board support
8081 commit 7737d5c658c606f999dfbe3e86b0fed49e5c50ef
8082 Author: Dave Liu <daveliu@freescale.com>
8083 Date: Fri Nov 3 12:11:15 2006 -0600
8085 mpc83xx: add QE ethernet support
8087 this patch adds support for the QUICC Engine based UCC gigabit ethernet device.
8089 commit 5f8204394e39bbe8cd9f08b8f8d145b6c01f7c73
8090 Author: Dave Liu <daveliu@freescale.com>
8091 Date: Fri Nov 3 19:33:44 2006 -0600
8093 mpc83xx: Add MPC8360EMDS basic board support
8095 Add support for the Freescale MPC8360EMDS board.
8096 Includes DDR, DUART, Local Bus, PCI.
8098 commit 23892e49352de74f7fac36ff90bb1be143d195e3
8099 Author: Dave Liu <daveliu@freescale.com>
8100 Date: Tue Oct 31 19:30:40 2006 -0600
8102 mpc83xx: add the QUICC Engine (QE) immap file
8104 common QE immap file. Also required for 8360.
8106 commit b701652a4992bdcc62fb1a6038a85beef9e55da4
8107 Author: Dave Liu <daveliu@freescale.com>
8108 Date: Tue Oct 31 19:25:38 2006 -0600
8110 mpc83xx: Add 8360 specifics to 83xx immap
8112 Mainly add QE device dependencies, with appropriate 8360 protection.
8115 commit 988833324a7fda482c8ac3ca23eb539f8232e404
8116 Author: Timur Tabi <timur@freescale.com>
8117 Date: Tue Oct 31 19:14:41 2006 -0600
8119 mpc83xx: Fix PCI, USB, bootargs for MPC8349E-mITX
8121 PREREQUISITE PATCHES:
8123 * This patch can only be applied after the following patches have been applied:
8125 1) DNX#2006092142000015 "Add support for the MPC8349E-mITX 1/2"
8126 2) DNX#2006092142000024 "Add support for the MPC8349E-mITX 2/2"
8130 * For the 8349E-mITX, fix some size values in pci_init_board(), enable
8131 the clock for the 2nd USB board (Linux kernel will hang otherwise),
8132 and fix the CONFIG_BOOTARGS macro.
8134 Signed-off-by: Timur Tabi <timur@freescale.com>
8136 commit 2ad6b513b31070bd0c003792ed1c3e7f5d740357
8137 Author: Timur Tabi <timur@freescale.com>
8138 Date: Tue Oct 31 18:44:42 2006 -0600
8140 mpc83xx: Add support for the MPC8349E-mITX
8142 PREREQUISITE PATCHES:
8144 * This patch can only be applied after the following patches have been applied:
8146 1) DNX#2006090742000024 "Add support for multiple I2C buses"
8147 2) DNX#2006090742000033 "Multi-bus I2C implementation of MPC834x"
8148 3) DNX#2006091242000041 "Additional MPC8349 support for multibus i2c"
8149 4) DNX#2006091242000078 "Add support for variable flash memory sizes on 83xx systems"
8150 5) DNX#2006091242000069 "Add support for Errata DDR6 on MPC 834x systems"
8154 * Add support for the Freescale MPC8349E-mITX reference design platform.
8155 The second TSEC (Vitesse 7385 switch) is not supported at this time.
8157 Signed-off-by: Timur Tabi <timur@freescale.com>
8159 commit 183da6d9b446cc12123455844ad1187e2375626f
8160 Author: Ben Warren <bwarren@qstreams.com>
8161 Date: Tue Sep 12 10:15:53 2006 -0400
8163 Additional MPC8349 support for multibus i2c
8167 Here is a patch for a file that was accidentally left out of a previous
8170 It accompanies the patch with ticket DNX#2006090742000024
8173 Change PCI initialization to use new multi-bus I2C API.
8178 commit b24f119d672b709d153ff2ac091d4aa63ec6877d
8179 Author: Ben Warren <bwarren@qstreams.com>
8180 Date: Thu Sep 7 16:51:04 2006 -0400
8182 Multi-bus I2C implementation of MPC834x
8186 Attached is a patch implementing multiple I2C buses on the MPC834x CPU
8187 family and the MPC8349EMDS board in particular.
8188 This patch requires Patch 1 (Add support for multiple I2C buses).
8189 Testing was performed on a 533MHz board.
8191 /*** Note: This patch replaces ticket DNX#2006083042000027 ***/
8193 Signed-off-by: Ben Warren <bwarren@qstreams.com>
8196 Implemented driver-level code to support two I2C buses on the
8197 MPC834x CPU family and the MPC8349EMDS board. Available I2C bus speeds
8198 are 50kHz, 100kHz and 400kHz on each bus.
8203 commit bb99ad6d8257bf828f150d40f507b30d80a4a7ae
8204 Author: Ben Warren <bwarren@qstreams.com>
8205 Date: Thu Sep 7 16:50:54 2006 -0400
8207 Add support for multiple I2C buses
8211 Attached is a patch providing support for multiple I2C buses at the
8212 command level. The second part of the patch includes an implementation
8213 for the MPC834x CPU and MPC8349EMDS board.
8215 /*** Note: This patch replaces ticket DNX#2006083042000018 ***/
8217 Signed-off-by: Ben Warren <bwarren@qstreams.com>
8221 1. Include new 'i2c' command (based on USB implementation) using
8222 CONFIG_I2C_CMD_TREE.
8224 2. Allow multiple buses by defining CONFIG_I2C_MULTI_BUS. Note that
8225 the commands to change bus number and speed are only available under the
8226 new 'i2c' command mentioned in the first bullet.
8228 3. The option CFG_I2C_NOPROBES has been expanded to work in multi-bus
8229 systems. When CONFIG_I2C_MULTI_BUS is used, this option takes the form
8230 of an array of bus-device pairs. Otherwise, it is an array of uchar.
8233 Added new 'i2c' master command for all I2C interaction. This is
8234 conditionally compiled with CONFIG_I2C_CMD_TREE. New commands added for
8235 setting I2C bus speed as well as changing the active bus if the board
8236 has more than one (conditionally compiled with
8237 CONFIG_I2C_MULTI_BUS). Updated NOPROBE logic to handle multiple buses.
8243 commit bed85caf872714ebf53013967a695c9d63acfc68
8244 Author: Timur Tabi <timur@freescale.com>
8245 Date: Tue Oct 31 18:13:36 2006 -0600
8247 mpc83xx: Add support for Errata DDR6 on MPC 834x systems
8251 * Errata DDR6, which affects all current MPC 834x processors, lists changes
8252 required to maintain compatibility with various types of DDR memory. This
8253 patch implements those changes.
8255 Signed-off-by: Timur Tabi <timur@freescale.com>
8257 commit afd6e470f639883002c7c59d562690a5cb0f4865
8258 Author: Timur Tabi <timur@freescale.com>
8259 Date: Wed Oct 25 18:45:23 2006 -0500
8261 mpc83xx: fix TQM build by defining a CFG_FLASH_SIZE for it
8263 commit 31068b7c4abeefcb2c8fd4fbeccc8ec6c6d0475a
8264 Author: Timur Tabi <timur@freescale.com>
8265 Date: Tue Aug 22 17:07:00 2006 -0500
8267 mpc83xx: Add support for variable flash memory sizes on 83xx systems
8271 * On 83xx systems, use the CFG_FLASH_SIZE macro to program the LBC local access
8272 window registers, instead of using a hard-coded value of 8MB.
8274 Signed-off-by: Timur Tabi <timur@freescale.com>
8276 commit 2fc34ae66e73fa7841d1a006dc1b5dcbc1f78965
8277 Author: Tanya Jiang <tanya.jiang@freescale.com>
8278 Date: Thu Aug 3 18:38:13 2006 +0800
8280 mpc83xx: Unified TQM834x variable names with 83xx and consolidated macros
8282 Unified TQM834x variable names with 83xx and consolidated macro
8283 in preparation for the 8360 and other upcoming 83xx devices.
8285 Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
8287 commit f6eda7f80ccc13d658020268c507d7173cf2e8aa
8288 Author: Dave Liu <daveliu@freescale.com>
8289 Date: Wed Oct 25 14:41:21 2006 -0500
8291 mpc83xx: Changed to unified mpx83xx names and added common 83xx changes
8293 Incorporated the common unified variable names and the changes in preparation
8294 for releasing mpc8360 patches.
8296 Signed-off-by: Dave Liu <daveliu@freescale.com>
8298 commit 3894c46c27c64891f93ac04edde86a9fa9758d92
8299 Author: Tanya Jiang <tanya.jiang@freescale.com>
8300 Date: Thu Aug 3 18:36:02 2006 +0800
8302 mpc83xx: Fix missing build for mpc8349emds pci.c
8304 Make pci build for mpc8349emds
8306 Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
8308 commit 09a81ff740b29deea1e2ab08a3c2ac136c2e6219
8309 Author: Tanya Jiang <tanya.jiang@freescale.com>
8310 Date: Thu Aug 3 18:39:49 2006 +0800
8312 mpc83xx: Removed unused file resetvec.S for mpc83xx cpu
8314 Removed unused file resetvec.S for mpc83xx cpu
8316 Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
8318 commit 04f899fc465c3e44f2b55ecc70618f5696fc0ddf
8319 Author: Nick Spence <Nick.Spence@freescale.com>
8320 Date: Sat Sep 30 00:32:59 2006 -0700
8322 NAND Flash verify across block boundaries
8324 This patch addresses a problem when CONFIG_MTD_NAND_VERIFY_WRITE is
8326 and the write crosses a block boundary. The pointer to the verification
8327 buffer (bufstart) is not being updated to reflect the starting of the
8329 block so the verification of the second block fails.
8333 * Fix NAND FLASH page verification across block boundaries
8335 commit f484dc791a3932537213c43c654cc1295c64b84c
8336 Author: Nick Spence <nick.spence@freescale.com>
8337 Date: Thu Sep 7 07:39:46 2006 -0700
8339 Added RGMII support to the TSECs and Marvell 881111 Phy
8341 Added a phy initialization to adjust the RGMII RX and TX timing
8342 Always set the R100 bit in 100 BaseT mode regardless of the TSEC mode
8344 Signed-off-by: Nick Spence <nick.spence@freescale.com>
8346 commit 4831c8b8a97799da77923d6bbb4c260c0d45521c
8347 Author: roy zang <tie-fei.zang@freescale.com>
8348 Date: Fri Nov 3 13:10:00 2006 +0800
8350 Remove some unused CFG define.
8353 commit 99c09c4dec34f77c243bf51bea532e3f339410ad
8354 Author: roy zang <tie-fei.zang@freescale.com>
8355 Date: Fri Nov 3 13:07:36 2006 +0800
8357 Change the TEXT_BASE from 0xFFF00000 to 0xFF000000.
8358 Both work. 0xFF000000 seems more reasonable.
8360 commit c59200443072353044aa4bf737a5a60f9a9af231
8361 Author: Wolfgang Denk <wd@pollux.denx.de>
8362 Date: Thu Nov 2 15:15:01 2006 +0100
8364 Release U-Boot 1.1.6
8366 commit c1fbe4103a0d6c8957f912af902d705ba67836f2
8367 Author: roy zang <tie-fei.zang@freescale.com>
8368 Date: Thu Nov 2 19:14:48 2006 +0800
8370 This patch comes from Yuli's posted patch on 8/8/2006
8371 titled "CFI Driver Little-Endian write Issue".
8373 http://sourceforge.net/mailarchive/message.php?msg_id=36311999
8375 If that patch applied, please discard this one.
8376 Until now , I do not see his patch is applied. So please apply this one.
8378 Signed-off-by: Yuli Barcohen <yuli@arabellasw.com>
8379 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
8381 commit b825f158e449e1e9cf74c08e572955e122394c96
8382 Author: roy zang <tie-fei.zang@freescale.com>
8383 Date: Thu Nov 2 19:12:31 2006 +0800
8385 Tsi108 on chip i2c support.
8387 The i2c Interface provides a master-only, serial interface that can be
8388 used for initializing Tsi108/Tsi109 registers from an EEPROM after a
8391 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
8392 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
8394 commit 9226e7d6f09b9a1ac074cd918c81225a4689bba8
8395 Author: roy zang <tie-fei.zang@freescale.com>
8396 Date: Thu Nov 2 19:11:06 2006 +0800
8398 Tsi108 on chip pci controller support.
8400 If there is no pci card, the tsi108/109 pci configure read will
8401 cause a machine check exception to the processor. PCI error should
8402 also be cleared after the read.
8404 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
8405 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
8407 commit d1927cee977126e547ceeba23e4f978f377cfb8f
8408 Author: roy zang <tie-fei.zang@freescale.com>
8409 Date: Thu Nov 2 19:08:55 2006 +0800
8411 Tundra tsi108 on chip Ethernet controller support.
8413 The following is a brief description of the Ethernet controller:
8414 The Tsi108/9 Ethernet Controller connects Switch Fabric to two independent
8415 Gigabit Ethernet ports,E0 and E1. It uses a single Management interface
8416 to manage the two physical connection devices (PHYs). Each Ethernet port
8417 has its own statistics monitor that tracks and reports key interface
8418 statistics. Each port supports a 256-entry hash table for address
8419 filtering. In addition, each port is bridged to the Switch Fabric
8420 through a 2-Kbyte transmit FIFO and a 4-Kbyte Receive FIFO.
8422 Each Ethernet port also has a pair of internal Ethernet DMA channels to
8423 support the transmit and receive data flows. The Ethernet DMA channels
8424 use descriptors set up in memory, the memory map of the device, and
8425 access via the Switch Fabric. The Ethernet Controller?s DMA arbiter
8426 handles arbitration for the Switch Fabric. The Controller also
8427 has a register businterface for register accesses and status monitor
8430 The PMD (Physical Media Device) interface operates in MII, GMII, or TBI
8431 modes. The MII mode is used for connecting with 10 or 100 Mbit/s PMDs.
8432 The GMII and TBI modes are used to connect with Gigabit PMDs. Internal
8433 data flows to and from the Ethernet Controller through the Switch Fabric.
8435 Each Ethernet port uses its transmit and receive DMA channels to manage
8436 data flows through buffer descriptors that are predefined by the
8437 system (the descriptors can exist anywhere in the system memory map).
8438 These descriptors are data structures that point to buffers filled
8439 with data ready to transmit over Ethernet, or they point to empty
8440 buffers ready to receive data from Ethernet.
8442 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
8443 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
8445 commit 78aa0c3427f3ecdeb34aabfbbe2dd23b6ad8f40e
8446 Author: roy zang <tie-fei.zang@freescale.com>
8447 Date: Thu Nov 2 19:01:33 2006 +0800
8449 Tundra tsi108 header file.
8451 The Tundra Semiconductor Corporation (Tundra) Tsi108 is a host bridge for
8452 PowerPC processors that offers numerous system interconnect options for
8453 embedded application designers. The Tsi108 can interconnect 60x or
8454 MPX processors to PCI/X peripherals, DDR2-400 memory, Gigabit Ethernet,
8455 and Flash. Provided the macro define for tsi108 chip.
8457 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
8458 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
8460 commit 87c4db09699c6b89176b31004afcb83eb1585d47
8461 Author: roy zang <tie-fei.zang@freescale.com>
8462 Date: Thu Nov 2 18:59:15 2006 +0800
8464 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
8465 mpc7448hpc2 board support high level code:tsi108 init + mpc7448hpc2.
8467 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
8468 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
8470 commit 27801b8ab11c61b577e45742a515bb3b23b80241
8471 Author: roy zang <tie-fei.zang@freescale.com>
8472 Date: Thu Nov 2 18:57:21 2006 +0800
8474 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
8475 Make ,config.mk and link file for the mpc7448hpc2 board.
8477 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
8478 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
8480 commit c6411c0c3bbc79f9ba8aef58296a42d8f9d8a0a6
8481 Author: roy zang <tie-fei.zang@freescale.com>
8482 Date: Thu Nov 2 18:55:04 2006 +0800
8484 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
8485 The mpc7448hpc2 board support header file.
8487 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
8488 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
8490 commit 625bb5ddb50b243f931262ca8c46956409471917
8491 Author: roy zang <tie-fei.zang@freescale.com>
8492 Date: Thu Nov 2 18:52:21 2006 +0800
8494 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
8495 The mpc7448hpc2 board support low level assemble language init code.
8497 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
8498 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
8500 commit 4c52783b3d024e153c4972b97332e314bc3bdc46
8501 Author: roy zang <tie-fei.zang@freescale.com>
8502 Date: Thu Nov 2 18:49:51 2006 +0800
8504 General code modification for mpc7448hpc2 board support.
8505 1. Add 7447A and 7448 processor support.
8506 2. Add the following flags.
8508 CFG_CONFIG_BUS_CLK : If the 74xx bus frequency can be configured dynamically
8509 (such as by switch on board), this flag should be set.
8511 CFG_EXCEPTION_AFTER_RELOCATE: If an exception occurs after the u-boot
8512 relocates to RAM, this flag should be set.
8514 CFG_SERIAL_HANG_IN_EXCEPTION: If the print out function will cause the
8515 system hang in exception, this flag should be set.
8517 There is a design issue for tsi108/109 pci configure read. When pci scan
8518 the slots, if there is no pci card, the tsi108/9 will cause a machine
8519 check exception for mpc7448 processor.
8521 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
8522 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
8524 commit 69366bf42f22d67efce8da3f8c40a43d4a3c2695
8525 Author: roy zang <tie-fei.zang@freescale.com>
8526 Date: Thu Nov 2 18:34:47 2006 +0800
8528 Add README file for mpc7448hpc2 board.
8529 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
8531 commit 25721b5cec2be4bce79cfade17ec8f6aa1e67526
8532 Author: Bartlomiej Sieka <tur@semihalf.com>
8533 Date: Wed Nov 1 02:04:38 2006 +0100
8535 Finish up support for MarelV38B board
8536 - add watchdog support
8537 - enable GPIO_WKUP_7 pin for input
8540 commit ffa150bc90c943ca265170bd1be3f293674dd5c7
8541 Author: Bartlomiej Sieka <tur@semihalf.com>
8542 Date: Wed Nov 1 01:45:46 2006 +0100
8544 - Fix issues related to the use of ELDK 4 when compiling for MarelV38B:
8545 * remove warnings when compiling ethaddr.c
8546 * adjust linker script (fixes a crash resulting from incorrect
8547 definition of __u_boot_cmd_start)
8548 - Some MarelV38B code cleanup.
8550 commit dae80f3caf9754a6dd3ddf3cf903d0c46cbd4385
8551 Author: Bartlomiej Sieka <tur@semihalf.com>
8552 Date: Wed Nov 1 01:38:16 2006 +0100
8554 - Add MPC5XXX register definition MPC5XXX_WU_GPIO_DATA_I and change the
8555 MPC5XXX_WU_GPIO_DATA macro to MPC5XXX_WU_GPIO_DATA_O (per MPC5200 User's
8556 Manual). Replace the uses of MPC5XXX_WU_GPIO_DATA with
8557 MPC5XXX_WU_GPIO_DATA_O for affected boards.
8559 - Add defintions for some MPC5XXX GPIO pins.
8561 commit 82d9c9ec29a1bec1b03ba616425ebaed231072c8
8562 Author: Bartlomiej Sieka <tur@semihalf.com>
8563 Date: Wed Nov 1 01:34:29 2006 +0100
8565 Changed MarelV38B board make target to lowercase. Config file cleanup.
8567 commit 1954be6e9c9421b45d0a9d05b10356acc7563150
8568 Author: Wolfgang Denk <wd@pollux.denx.de>
8569 Date: Sun Oct 29 01:03:51 2006 +0200
8571 Automatically adjust ARFLAGS so "make -s" is really silent.
8573 commit fae684e89844856383bdf101440889557df3e6b1
8574 Author: Stefan Roese <sr@denx.de>
8575 Date: Sat Oct 28 16:45:00 2006 +0200
8577 [PATCH] omap925.c: Remove unused functions
8579 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
8580 Signed-off-by: Stefan Roese <sr@denx.de>
8582 commit 1265581502ab8ea8c08e8edbe9bf64fbd62fd776
8583 Author: Stefan Roese <sr@denx.de>
8584 Date: Sat Oct 28 17:12:58 2006 +0200
8586 [PATCH] Add some missing machtypes for netstar & voiceblue boards
8588 Use MACH_TYPE_NETSTAR and MACH_TYPE_VOICEBLUE defines instead of
8591 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
8592 Signed-off-by: Stefan Roese <sr@denx.de>
8594 commit 856f054410cef52d868feb330168b2a4c4091328
8595 Author: Stefan Roese <sr@denx.de>
8596 Date: Sat Oct 28 15:55:52 2006 +0200
8598 [PATCH] NAND: Partition name support added to NAND subsystem
8600 chpart, nboot and NAND subsystem related commands now accept also partition
8601 name to specify offset.
8603 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
8604 Signed-off-by: Stefan Roese <sr@denx.de>
8606 commit 07a69a18c2ecfda904231fdf23e2523ea7792eb6
8607 Author: Wolfgang Denk <wd@pollux.denx.de>
8608 Date: Sat Oct 28 02:29:44 2006 +0200
8612 commit 2751a95abd1b96911081c357e96a12fa97b40dee
8613 Author: Wolfgang Denk <wd@pollux.denx.de>
8614 Date: Sat Oct 28 02:29:14 2006 +0200
8616 Enable commandline editing and hush shell on all TQM boards.
8618 commit 8078f1a5f63a739b8533478f6c2b62fb1e2f79d7
8619 Author: Wolfgang Denk <wd@pollux.denx.de>
8620 Date: Sat Oct 28 02:28:02 2006 +0200
8622 README says CFG_AUTO_COMPLETE, but ocde uses CONFIG_AUTO_COMPLETE
8624 commit 471a7be7a042e95e440f5de969c9765214ae8d6e
8625 Author: Wolfgang Denk <wd@denx.de>
8626 Date: Sat Oct 28 01:14:32 2006 +0200
8628 Check for illegal character '=' in environment variable names.
8630 Make sure the string passed as variable name does not contain a '='
8631 character. This not only prevents the common error or typing
8632 "setenv foo=bar" instead of "setenv foo bar", but (more importantly)
8633 also closes a backdoor which allowed to delete write-protected
8634 environment variables, for example by using "setenv ethaddr=".
8636 commit 19973b6ad9863a56f5c5fbcfd90e20ab2490a2c2
8637 Author: Wolfgang Denk <wd@pollux.denx.de>
8638 Date: Sat Oct 28 00:38:39 2006 +0200
8642 commit e11887a77d81077416a2d1c5e0354916fee8c034
8643 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
8644 Date: Thu Oct 26 17:55:31 2006 +0200
8646 Don't pass any debug options directly to the assembler
8648 When passing the -g option to gcc, gcc automatically selects a
8649 suitable --g<format> option to pass on to the assembler.
8650 Thus, there's no point in forcing a specific debug option on the
8651 assembler using the -Wa mechanism.
8653 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
8655 commit ea08ff6e14f9ebb8c07cfa79c51ef540eb087393
8656 Author: Jon Loeliger <jdl@freescale.com>
8657 Date: Fri Oct 27 07:47:22 2006 -0500
8659 MPC86xx: Cleaned up unused and conditionally used local variables.
8661 Signed-off-by: Jon Loeliger <jdl@freescale.com>
8663 commit d38936cdae46bfd2623ff83f6ce9b616d36ab0f9
8664 Author: Wolfgang Denk <wd@pollux.denx.de>
8665 Date: Fri Oct 27 11:55:21 2006 +0200
8667 Fix "ar" flags in some Makefiles to allow for silent "make -s"
8669 commit 4653f91c13ed51c21cc4c3855745d69a3fb1817f
8670 Author: Ben Warren <bwarren@qstreams.com>
8671 Date: Thu Oct 26 14:38:25 2006 -0400
8673 Fix TSEC driver (now for real): avoid crashes if PHY is not attached
8674 to a TSEC (e.g. a switch is connected via RMII) or
8675 if the PHY is defective/incorrectly configured.
8677 Signed-off-by: Ben Warren <bwarren@qstreams.com>
8679 commit b985b5d6e4fb88f508f7aa0f126c2e27ada2b999
8680 Author: Ben Warren <bwarren@qstreams.com>
8681 Date: Thu Oct 26 14:38:25 2006 -0400
8683 Fix TSEC driver: avoid crashes if PHY is not attached
8684 to a TSEC (e.g. a switch is connected via RMII) or
8685 if the PHY is defective/incorrectly configured.
8687 Signed-off-by: Ben Warren <bwarren@qstreams.com>
8689 commit 2b2a40bebbf1822506e80e631d7253e60f0e0fe6
8690 Author: Wolfgang Denk <wd@pollux.denx.de>
8691 Date: Thu Oct 26 16:24:31 2006 +0200
8695 commit 5e3b0bc19f07ed277d85324ad0427642c8981baf
8696 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
8697 Date: Wed Oct 25 15:48:59 2006 +0200
8699 Finish up support for the ATSTK1000/ATSTK1002 boards
8701 Add atstk1002_config target to Makefile and move the AVR32 section
8702 down below Blackfin so that it doesn't end up in the middle of
8705 Drop the autogenerated linker script thing for now. Will have to
8706 revisit how to handle chips with different flash and RAM layout
8709 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
8711 commit c76f951a747cfb87ba826ef45b5aea82d5b5dbb4
8712 Author: Kumar Gala <galak@kernel.crashing.org>
8713 Date: Tue Oct 24 23:47:37 2006 -0500
8715 Added support for Multi-Image files that contain a device tree
8717 If a Multi-Image file contains a third image we try to use it as a
8718 device tree. The device tree image is assumed to be uncompressed in the
8719 image file. We automatically allocate space for the device tree in memory
8720 and provide an 8k pad to allow more than a reasonable amount of growth.
8722 Additionally, a device tree that was contained in flash will now automatically
8723 get copied to system memory as part of boot. Previously an error was
8724 reported if one tried to boot a device tree that was in flash.
8726 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
8728 commit 7c52c4b943ff52bbe8796a7e2d3e476ceaf3f512
8729 Author: Wolfgang Denk <wd@denx.de>
8730 Date: Tue Oct 24 21:35:55 2006 +0200
8732 Switch to automatically generated CHANGELOG file.
8733 (use "make CHANGELOG" to update it from time to time)
8735 commit 7ade0c634a979c32fa91a74e8f5775f24651fbe6
8736 Author: Stefan Roese <sr@denx.de>
8737 Date: Tue Oct 24 18:06:48 2006 +0200
8739 Fix bug in PPC440 NAND driver cpu/ppc4xx/ndfc.c
8740 Patch by Stefan Roese, 24 Oct 2006
8742 commit 8ae3b713b2286e0c3213b7802062e4c1599010de
8743 Author: Wolfgang Denk <wd@pollux.denx.de>
8744 Date: Tue Oct 24 17:24:55 2006 +0200
8746 Merge with /home/wd/git/u-boot/master
8748 commit 47a6989c10685d2ab3efcf95228ce50d2a496d3e
8749 Author: Wolfgang Denk <wd@pollux.denx.de>
8750 Date: Tue Oct 24 15:32:57 2006 +0200
8754 commit 3a78e3e75b633ecb6413114ffd11e2f000c4f11e
8755 Author: Wolfgang Denk <wd@pollux.denx.de>
8756 Date: Tue Oct 24 14:51:36 2006 +0200
8758 Move atstk1000 files into vendor specific directory.
8759 Patch by Haavard Skinnemoen, 12 Sep 2006
8761 commit 6ccec4492e77428fd6eafd3dfe94fbdf08e91d37
8762 Author: Wolfgang Denk <wd@pollux.denx.de>
8763 Date: Tue Oct 24 14:42:37 2006 +0200
8765 Add ATSTK1000 and ATSTK1002 board support
8766 Patch by Haavard Skinnemoen, 06 Sep 2006
8768 This patch adds support for the ATSTK1000 with the ATSTK1002 CPU
8771 ATSTK1000 is a full-featured development board for AT32AP CPUs. It
8772 has two ethernet ports, a high quality QVGA LCD panel, a loudspeaker,
8773 and connectors for USART, PS/2, VGA, USB, MMC/SD cards and
8774 CompactFlash cards. For more information, please see this page:
8776 http://www.atmel.com/dyn/products/tools.asp?family_id=682
8778 The ATSTK1002 is a daughterboard for the ATSTK1000 supporting the
8781 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
8783 commit f93ae788c3640fcde5db383471d45548ff4060d0
8784 Author: Wolfgang Denk <wd@pollux.denx.de>
8785 Date: Tue Oct 24 14:31:24 2006 +0200
8787 Add common serial driver for Atmel AT32 and AT91 chips
8788 Patch by Haavard Skinnemoen, 06 Sep 2006
8790 This is a first attempt at creating a common serial driver for Atmel
8791 chips. For now, it supports the AT32AP7000 AVR32 chip, but it should
8792 be possible to support AT91RM9200 and other ARM-based chips with some
8793 minor modifications.
8795 There's nothing fundamentally AVR32-specific in this driver, but it
8796 does use some features which are currently only defined for the
8798 * pm_get_clock_freq: Obtain the clock frequency of a given domain
8799 * gd->console_uart: A "struct device" containing information about
8800 register mappings, gpio resources and clocks associated with the
8803 For more information about these features, please see the "AT32AP
8806 commit 72a087e04705c26cad982879ebd06b5281bf825a
8807 Author: Wolfgang Denk <wd@pollux.denx.de>
8808 Date: Tue Oct 24 14:27:35 2006 +0200
8810 Add AT32AP CPU and AT32AP7000 SoC support
8811 Patch by Haavard Skinnemoen, 06 Sep 2006
8813 This patch adds support for the AT32AP CPU family and the AT32AP7000
8814 chip, which is the first chip implementing the AVR32 architecture.
8816 The AT32AP CPU core is a high-performance implementation featuring a
8817 7-stage pipeline, separate instruction- and data caches, and a MMU.
8818 For more information, please see the "AVR32 AP Technical Reference":
8820 http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
8822 In addition to this, the AT32AP7000 chip comes with a large set of
8823 integrated peripherals, many of which are shared with the AT91 series
8824 of ARM-based microcontrollers from Atmel. Full data sheet is
8827 http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
8829 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
8831 commit 7b64fef33c66be648826c0ff9758298ef13d0604
8832 Author: Wolfgang Denk <wd@pollux.denx.de>
8833 Date: Tue Oct 24 14:21:16 2006 +0200
8835 Add AVR32 architecture support
8836 Patch by Haavard Skinnemoen, 6 Sep 2006 16:23:02 +0200
8838 This patch adds common infrastructure code for the Atmel AVR32
8839 architecture. See doc/README.AVR32 for details.
8841 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
8843 commit 2da2d9a4766063b9848f3a35ad6025499cf87265
8844 Author: Wolfgang Denk <wd@pollux.denx.de>
8845 Date: Tue Oct 24 13:57:33 2006 +0200
8847 Use -g instead of -gstabs in AFLAGS_DEBUG
8848 Patch by Haavard Skinnemoen, 30 Aug 2006
8850 In config.mk, -Wa,-gstabs is unconditionally appended to AFLAGS no
8851 matter what the target's preferred debugging format is. This patch
8852 simply replaces -gstabs with -g, so that the default debugging format
8853 for the architecture is used.
8855 commit 965829872169c2996023840d98e1d85ad148d629
8856 Author: Wolfgang Denk <wd@pollux.denx.de>
8857 Date: Tue Oct 24 13:55:18 2006 +0200
8859 Fix/workaround broken dependency handling with make 3.81
8860 Based on patch by Haavard Skinnemoen, 29 Aug 2006 11:20:39 +0200
8862 commit 8318fbf8cc30418b621ea9f39b84b4c1a08f003a
8863 Author: Marian Balakowicz <m8@semihalf.com>
8864 Date: Mon Oct 23 22:17:05 2006 +0200
8866 Fix sequoia separate object direcory building problems.
8868 commit 3dfa9cfdcee78b30da3432318b32821ffabe974b
8869 Author: Jon Loeliger <jdl@freescale.com>
8870 Date: Fri Oct 20 17:16:35 2006 -0500
8872 Use generic I2C register block on 85xx and 86xx.
8874 Replace private IMMAP I2C structures with generic reg block
8875 and allow 86xx to have multiple I2C device busses.
8877 Signed-off-by: Jon Loeliger <jdl@freescale.com>
8879 commit f5012827df11ca0c9be1df5f8b153e188dc2fa7c
8880 Author: Jon Loeliger <jdl@freescale.com>
8881 Date: Fri Oct 20 15:54:34 2006 -0500
8883 Fix compilation warnings on a few 85xx boards.
8885 Signed-off-by: Jon Loeliger <jdl@freescale.com>
8887 commit 2047672684cf85cb6f96a1fbc993180aaaf19a99
8888 Author: Jon Loeliger <jdl@freescale.com>
8889 Date: Fri Oct 20 15:50:15 2006 -0500
8891 Converted all 85xx boards to use a common FSL I2C driver.
8892 Introduced COFIG_FSL_I2C to select the common FSL I2C driver.
8893 And removed hard i2c path from a few u-boot.lds scipts too.
8894 Minor whitespace cleanups along the way.
8896 Signed-off-by: Jon Loeliger <jdl@freescale.com>
8898 commit 4d45f69e362b05892c9e92a7907e5820995612aa
8899 Author: Jon Loeliger <jdl@freescale.com>
8900 Date: Thu Oct 19 12:02:24 2006 -0500
8902 Rewrite a series of goto statements as a sequences of
8903 conditional expressions instead.
8905 Use consistent return code 0/-1 for good/bad indicators.
8907 Include one fewer file if the driver isn't used at all.
8909 Signed-off-by: Jon Loeliger <jdl@freescale.com>
8911 commit 7237c033b02fe295880435f1eb80819a0c987532
8912 Author: Jon Loeliger <jdl@freescale.com>
8913 Date: Thu Oct 19 11:02:16 2006 -0500
8915 Moved i2c driver out of cpu/mpc86xx/i2c.c into drivers/fsl_i2c.c
8917 in an effort to begin to unify the umpteen FSL I2C drivers that
8918 are all otherwise very similar.
8920 Signed-off-by: Jon Loeliger <jdl@freescale.com>
8922 commit 13a7fcdf37f6ea9429ae04c9df67f893364cfe4b
8923 Author: Jon Loeliger <jdl@freescale.com>
8924 Date: Thu Oct 19 11:33:52 2006 -0500
8926 * Fix a bunch of compiler warnings for gcc 4.0
8928 Signed-off-by: Matthew McClintock <msm@freescale.com>
8930 commit af9e1f5b9e6f9ce810f5e8bf2961c9542a5865c2
8931 Author: Stefan Roese <sr@denx.de>
8932 Date: Tue Oct 17 06:14:31 2006 +0200
8934 Add monitor functions for indirect access to PPC440 DCR's
8935 Patch by Leonid Baryudin, 12 Oct 2006
8937 commit 5f3249a0a168e446a4cc9669b2bce0bc456f0a09
8938 Author: Jon Loeliger <jdl@freescale.com>
8939 Date: Fri Oct 13 16:47:53 2006 -0500
8941 Fixed leading whitespace issues.
8942 Removed spurious LAWAR thing.
8944 Signed-off-by: Jon Loeliger <jdl@freescale.com>
8946 commit 0ee90cb77e01d6e8ccd37e1bd96678597875c391
8947 Author: Jon Loeliger <jdl@freescale.com>
8948 Date: Thu Oct 12 10:42:36 2006 -0500
8950 Remove unneeded include files and local variable.
8952 Signed-off-by: Jon Loeliger <jdl@freescale.com>
8954 commit 1eaf3a5ff4960a46f3a9063568ba2af7883f07c5
8955 Author: Grant Likely <grant.likely@secretlab.ca>
8956 Date: Tue Oct 10 00:23:32 2006 -0600
8958 Fix possible uninitialized variable compiler warning.
8960 When CONFIG_OF_FLAG_TREE is set, the compiler complains that 'len' in
8961 do_bootm_linux() may be uninitialized. There is no possibility in the
8962 current code that len will get used uninitialized, but this fix follows
8963 the existing convention of setting both len and data to zero at the same
8966 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
8968 commit 7376eb87aaa601f728f9b8e5e9cd2711a67f529e
8969 Author: Matthew McClintock <msm@freescale.com>
8970 Date: Wed Oct 11 15:13:01 2006 -0500
8972 * Fix a bunch of compiler warnings for gcc 4.0
8974 Signed-off-by: Matthew McClintock <msm@freescale.com>
8976 commit bf651baa365e5447246aad6a633ccd667cf24a39
8977 Author: Jon Loeliger <jdl@freescale.com>
8978 Date: Wed Oct 11 10:10:43 2006 -0500
8980 Move "ar" flags to config.mk to allow for silent "make -s"
8982 commit 1fd5699a4a24f5c1dab1b32f480bace1ebb9fc3e
8983 Author: Jon Loeliger <jdl@freescale.com>
8984 Date: Tue Oct 10 17:19:03 2006 -0500
8986 Coding style changes to remove local varible blocks
8987 and reformat a bit nicer.
8989 commit 8b283dbb3a08d1b8d406bc15f119e081b3e2606a
8990 Author: Jon Loeliger <jdl@freescale.com>
8991 Date: Tue Oct 10 17:16:04 2006 -0500
8993 Fix whitespace issues.
8995 commit 7b382b7125f2397cce63253df62f183e3dfa2770
8996 Author: Jon Loeliger <jdl@freescale.com>
8997 Date: Tue Oct 10 17:14:45 2006 -0500
8999 Fix whitespace issues.
9001 commit e10390ddd736b0dad1528eec4b0fe35c0827139a
9002 Author: Jon Loeliger <jdl@freescale.com>
9003 Date: Tue Oct 10 17:06:53 2006 -0500
9005 Fix whitespace issues.
9007 commit 89875e96ba3f023157bf50d5f8e33bf254964a76
9008 Author: Jon Loeliger <jdl@freescale.com>
9009 Date: Tue Oct 10 17:03:43 2006 -0500
9011 Ran lindent and cleaned up whitespace issues.
9012 Format for 80-columns too.
9014 commit 333961ae7095fc66d8a041fce1ac9ee873b09d86
9015 Author: Jon Loeliger <jdl@freescale.com>
9016 Date: Tue Oct 10 17:02:22 2006 -0500
9018 Fix whitespace and 80-col issues.
9020 commit 5c912cb1c31266c66ca59b36f9b6f87296421d75
9021 Author: Stefan Roese <sr@denx.de>
9022 Date: Sat Oct 7 11:36:51 2006 +0200
9024 CFG_NAND_QUIET_TEST added to not warn upon missing NAND device
9025 Patch by Stefan Roese, 07 Oct 2006
9027 commit 5bc528fa4da751d472397b308137238a6465afd2
9028 Author: Stefan Roese <sr@denx.de>
9029 Date: Sat Oct 7 11:35:25 2006 +0200
9031 Update ALPR code (NAND support working now)
9032 Patch by Stefan Roese, 07 Oct 2006
9034 commit 77d5034847d328753b80c46b83f960a14a26f40e
9035 Author: Stefan Roese <sr@denx.de>
9036 Date: Sat Oct 7 11:33:03 2006 +0200
9038 Remove compile warnings in fpga code
9039 Patch by Stefan Roese, 07 Oct 2006
9041 commit f3443867e90d2979a7dd1c65b0d537777e1f9850
9042 Author: Stefan Roese <sr@denx.de>
9043 Date: Sat Oct 7 11:30:52 2006 +0200
9045 Add CONFIG_BOARD_RESET to configure board specific reset function
9046 Patch by Stefan Roese, 07 Oct 2006
9048 commit f55df18187e7a45cb73fec4370d12135e6691ae1
9049 Author: John Traill <john.traill@freescale.com>
9050 Date: Fri Sep 29 08:23:12 2006 +0100
9052 Fix missing tCycle/modfreq calculation.
9054 Signed-off-by: John Traill <john.traill@freescale.com>
9056 commit 8272dc2f58f2473d8995fcc9b916440cfba080f0
9057 Author: Andy Fleming <afleming@freescale.com>
9058 Date: Wed Sep 13 10:33:35 2006 -0500
9060 Updated config headers to add default FDT-based booting
9062 commit 09f3e09e9ebcfa7919ca8931a4b5504fadd1f1d3
9063 Author: Andy Fleming <afleming@freescale.com>
9064 Date: Wed Sep 13 10:34:18 2006 -0500
9066 Add support for eTSEC 3 & 4 on 8548 CDS
9068 * Added support for using eTSEC 3 and eTSEC 4 on the 8548 CDS.
9069 This will only work on rev 1.3 boards (but doesn't break older boards)
9070 * Cleaned up some comments to reflect the expanded role of tsec
9073 commit 084d648b109c8984f83674043c1a7fa3885ef801
9074 Author: Andy Fleming <afleming@freescale.com>
9075 Date: Wed Sep 13 10:33:56 2006 -0500
9077 Added code to support 2.6.18 PCI changes in u-boot
9079 * Added code to swizzle the IRQ map for the PCI
9081 commit afbdc649f8751e4f4f1a6f527edfe139773f2c15
9082 Author: Jon Loeliger <jdl@freescale.com>
9083 Date: Tue Sep 19 09:34:10 2006 -0500
9085 Modified makefile for new build mechanism.
9087 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9089 commit d14ba6a798beb753e7a864500414fcc2d198b8bc
9090 Author: Jon Loeliger <jdl@freescale.com>
9091 Date: Thu Sep 14 08:40:36 2006 -0500
9093 Handle 86xx SVR values according to the new Reference Manual.
9094 Both 8641 and 8641D have SVR == 0x8090, and are distinguished
9095 by the byte in bits 16-23 instead.
9096 Thanks to Jason Jin for noticing.
9098 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9100 commit 88c8f4921fc47fb0eb2384b16586f1bd7f275be7
9101 Author: Zhang Wei <wei.zhang@freescale.com>
9102 Date: Mon Aug 28 14:25:31 2006 +0800
9104 Fixed an OF-tree off-by-one bug when adding a new property name.
9105 This bug will cause the kernel booting to pause a long time.
9107 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
9108 (cherry picked from 2f15776ccc6dc32377d8ba9652b8f58059c27c6d commit)
9110 commit 9bff7a69a885adebbd2bd45990494ec4cf998a30
9111 Author: Jon Loeliger <jdl@freescale.com>
9112 Date: Tue Aug 29 11:05:09 2006 -0500
9114 Remove trailing empty lines.
9116 commit cd6d73d5b895a5935ac4fde0a356288142a584e0
9117 Author: Jon Loeliger <jdl@freescale.com>
9118 Date: Tue Aug 29 09:48:49 2006 -0500
9120 Remove bogus msync and use volatile asm.
9122 commit 778d45049ce5927b65b3ff1d8e6692b654bdd49e
9123 Author: Jon Loeliger <jdl@freescale.com>
9124 Date: Tue Aug 29 08:17:14 2006 -0500
9126 Add myself as maintainer for MPC8641HPCN.
9128 commit 2f15776ccc6dc32377d8ba9652b8f58059c27c6d
9129 Author: Zhang Wei <wei.zhang@freescale.com>
9130 Date: Mon Aug 28 14:25:31 2006 +0800
9132 Fixed an OF-tree off-by-one bug when adding a new property name.
9133 This bug will cause the kernel booting to pause a long time.
9135 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
9137 commit 5567806b67d0ae83493aa8823ad3b6c914f581d7
9138 Author: Haiying Wang <haiying.wang@freescale.com>
9139 Date: Fri Aug 25 14:38:34 2006 -0400
9141 Change ramdiskaddr and dtbaddr
9142 Remove PEX fluff commands.
9144 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
9145 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9147 commit b2b78421d9db49c21a821af8a19c21c1f7dfb29e
9148 Author: Matthew McClintock <msm@freescale.com>
9149 Date: Wed Aug 23 13:32:45 2006 -0500
9151 * Another small fix for booting with disable_of
9153 Signed-off-by: Matthew McClintock <msm@freescale.com>
9155 commit 4a7cc0f21918e6ecf07ed57075d67df2c4a1299c
9156 Author: Jon Loeliger <jdl@freescale.com>
9157 Date: Wed Aug 23 11:04:43 2006 -0500
9159 Cleanup and lindent new AHCI driver.
9161 commit dabf9ef8c10b4dead5ef2106ef742b1c06b542de
9162 Author: Jin Zhengxiong <jason@bus.ap.freescale.net>
9163 Date: Wed Aug 23 19:15:12 2006 +0800
9165 Add AHCI define and sata support for MPC8641HPCN board.
9167 Signed-off-by:Jason Jin<jason.jin@freescale.com>
9169 commit 4782ac80b02f0d01afd309e2200dd3c7037f2ba4
9170 Author: Jin Zhengxiong <jason@bus.ap.freescale.net>
9171 Date: Wed Aug 23 19:10:44 2006 +0800
9173 Add AHCI support to u-boot
9175 Add AHCI support in u-boot, enable the sata disk controllers which
9176 following the AHCI protocol.
9178 Signed-off-by:Jason Jin<jason.jin@freescale.com>
9180 commit d8ea2acf5f137cae99417df4f573d036ee384668
9181 Author: Zhang Wei <wei.zhang@freescale.com>
9182 Date: Wed Aug 23 17:54:32 2006 +0800
9184 Add dtb boot-up parameter to default boot commands.
9186 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
9188 commit b93775c2036b99baa390ea425c4771895bbc63c4
9189 Author: Jon Loeliger <jdl@freescale.com>
9190 Date: Tue Aug 22 18:26:08 2006 -0500
9192 Cleanup even more poorly introduced whitespace.
9194 commit ae6241685cbcf0c79a3636530d2ceab1fb291a94
9195 Author: Jon Loeliger <jdl@freescale.com>
9196 Date: Tue Aug 22 18:07:00 2006 -0500
9198 Cleanup more poorly introduced whitespace.
9200 commit 2c33e8a1c535b3ae91cf0b284480600bf3f57c57
9201 Author: Jon Loeliger <jdl@freescale.com>
9202 Date: Tue Aug 22 17:54:05 2006 -0500
9204 Cleanup poorly introduced whitespace.
9206 commit 80e955c7dd98f4b4fd23c2113caf75ed2b77b5b3
9207 Author: Jon Loeliger <jdl@freescale.com>
9208 Date: Tue Aug 22 12:25:27 2006 -0500
9210 General indent and whitespace cleanups.
9212 commit ffff3ae56f5842ca3679e4ce7922b819a87aad9f
9213 Author: Jon Loeliger <jdl@freescale.com>
9214 Date: Tue Aug 22 12:06:18 2006 -0500
9216 General indent and whitespace cleanups.
9218 commit 41a0e8b304d3ff55fe27a230507aac79684016ac
9219 Author: Jon Loeliger <jdl@freescale.com>
9220 Date: Tue Aug 22 10:42:21 2006 -0500
9222 Cleanup compiler warnings.
9224 commit 5de62c47a8628b3da4d73f7c07027f32a3342d40
9225 Author: Matthew McClintock <msm@freescale.com>
9226 Date: Tue Aug 22 09:31:59 2006 -0500
9228 Fix disable_of booting
9230 Signed-off-by: Matthew McClintock <msm@freescale.com>
9232 commit 87a449c8ac396420cb24260f717ea9e6faa82047
9233 Author: Matthew McClintock <msm@freescale.com>
9234 Date: Tue Aug 22 09:23:55 2006 -0500
9236 Support for FDT in uImage format, error when using FDT from flash
9238 Signed-off-by: Matthew McClintock <msm@freescale.com>
9240 commit 75c299c38369d01addd5e054b8a16217b70f4a86
9241 Author: Haiying Wang <haiying.wang@freescale.com>
9242 Date: Tue Aug 15 15:12:55 2006 -0400
9244 Unlock cache before kernel starts up for MPC86xx
9246 commit 67256678f00c09b0a7f19e862e5c1847553d31bc
9247 Author: Haiying Wang <haiying.wang@freescale.com>
9248 Date: Tue Aug 15 15:13:15 2006 -0400
9250 Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
9252 commit 1c8f6d8fb028f156094d05f2d14298e6479364ac
9253 Author: Haiying Wang <haiying.wang@freescale.com>
9254 Date: Tue Aug 15 15:12:55 2006 -0400
9256 Unlock cache before kernel starts up for MPC86xx
9258 commit 0d9ccc55edf9a7f3c5b2b6263580a6ea8d702a04
9259 Author: Haiying Wang <haiying.wang@freescale.com>
9260 Date: Tue Aug 15 15:13:15 2006 -0400
9262 Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
9264 commit 86c8e17f25e972a7e272950a0735fad84e082b88
9265 Author: Matthew McClintock <msm@freescale.com>
9266 Date: Wed Aug 16 13:59:47 2006 -0500
9268 * Fix disable_of booting
9270 Signed-off-by: Matthew McClintock <msm@freescale.com>
9272 commit 25c751e9adc86e22fe3b5b47cf2806379b575db7
9273 Author: Matthew McClintock <msm@freescale.com>
9274 Date: Wed Aug 16 10:54:09 2006 -0500
9276 * Support for FDT in uImage format, error when using FDT from flash
9278 Signed-off-by: Matthew McClintock <msm@freescale.com>
9280 commit 899620c2d66d4eef3b2a0034d062e71d45d886c9
9281 Author: Stefan Roese <sr@denx.de>
9282 Date: Tue Aug 15 14:22:35 2006 +0200
9284 Add initial support for the ALPR board from Prodrive
9285 NAND needs some additional testing
9286 Patch by Heiko Schocher, 15 Aug 2006
9288 commit f0ff4692ff3372dec55074a8eb444943ab095abb
9289 Author: Stefan Roese <sr@denx.de>
9290 Date: Tue Aug 15 14:15:51 2006 +0200
9292 Add FPGA Altera Cyclone 2 support
9293 Patch by Heiko Schocher, 15 Aug 2006
9295 commit fecf1c7e4de1b2779edc18742b91c22bdc32b68b
9296 Author: Jon Loeliger <jdl@freescale.com>
9297 Date: Mon Aug 14 15:33:38 2006 -0500
9299 Fix BAT0 to actually be cacheable, non-guarded as documented.
9301 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9303 commit 40bc83559db5745681909fd7382ae509567e116d
9304 Author: Jon Loeliger <jdl@freescale.com>
9305 Date: Wed Aug 9 15:32:16 2006 -0500
9307 Removed MPC8641HPCN DTS source file from build.
9308 It is no longer linked into U-Boot; its sources are
9309 now located in the kernel tree.
9311 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9313 commit 34c3c0e01dbf1f8cc2bd08de92f2b89ba84921eb
9314 Author: Matthew McClintock <msm@freescale.com>
9315 Date: Wed Jun 28 10:47:03 2006 -0500
9317 * Switched default PCI speed for 8540 ADS back to 33MHz
9319 * Added comments and a printf to warn that PCI-X won't
9321 Patch by Andy Fleming 17-Mar-2006
9323 Signed-off-by: Andy Fleming <afleming@freescale.com>
9325 commit b6c5e1373b6ea0bb37a18e4aeecec00613d1cd39
9326 Author: Matthew McClintock <msm@freescale.com>
9327 Date: Wed Jun 28 10:46:35 2006 -0500
9329 * Fixed a bug where 8555 PCI code used the old variable and function names Patch by Andy Fleming 17-Mar-2006
9331 Signed-off-by: Andy Fleming <afleming@freescale.com>
9333 commit bf1dfffd8c26f8ecdd630a0ae4c834e751e4e452
9334 Author: Matthew McClintock <msm@freescale.com>
9335 Date: Wed Jun 28 10:46:13 2006 -0500
9337 * Added VIA configuration table
9339 * Added support for PCI2 on CDS
9340 Patch by Andy Fleming 17-Mar-2006
9342 Signed-off-by: Andy Fleming <afleming@freescale.com>
9344 commit c88f9fe66b64247e5b6a38410ba315ca25596d16
9345 Author: Matthew McClintock <msm@freescale.com>
9346 Date: Wed Jun 28 10:45:41 2006 -0500
9348 * Fixed PCI memory definitions Patch by Andy Fleming 17-Mar-2006
9350 Signed-off-by: Andy Fleming <afleming@freescale.com>
9352 commit 97074ed9655309b64231bc2cee69fe85399f8055
9353 Author: Matthew McClintock <msm@freescale.com>
9354 Date: Wed Jun 28 10:45:17 2006 -0500
9356 * Added support for initializing second PCI bus on 85xx Patch by Andy Fleming 17-Mar-2006
9358 Signed-off-by: Andy Fleming <afleming@freescale.com>
9360 commit f0e6f57f71b3c4fdd13028eb03c3f3e91926dda2
9361 Author: Matthew McClintock <msm@freescale.com>
9362 Date: Wed Jun 28 10:44:49 2006 -0500
9364 * Added PCI-X #defines for PCI-X initialization Patch by Andy Fleming on 17-Mar-2006
9366 Signed-off-by: Andy Fleming <afleming@freescale.com>
9368 commit a4e11558b810ef2cddffdf7b9d86bc1130441960
9369 Author: Matthew McClintock <msm@freescale.com>
9370 Date: Wed Jun 28 10:44:23 2006 -0500
9372 * Made sure the code which disables prefetch for PCI devices sets the size of the prefetch region to 0 Patch by Andy Fleming on 17-Mar-2006
9374 Signed-off-by: Andy Fleming <afleming@freescale.com>
9376 commit 0e16387db1d4aacd5bf35cb6d7c1942765c0347b
9377 Author: Matthew McClintock <msm@freescale.com>
9378 Date: Wed Jun 28 10:43:36 2006 -0500
9380 * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards Patch by Jon Loeliger 17-Jan-2006
9382 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9384 commit 855e6fb073f9d04fe4a7f06c107ecbac6344ddd4
9385 Author: Matthew McClintock <msm@freescale.com>
9386 Date: Wed Jun 28 10:43:00 2006 -0500
9388 * Removed the oftree.dts for stxxtx in light of the changes to the flat device tree handling code Patch by Matthew McClintock 26-June-2006
9390 commit 5498d90312aad9f6bdbf047986027c35b03cd163
9391 Author: Matthew McClintock <msm@freescale.com>
9392 Date: Wed Jun 28 10:42:24 2006 -0500
9394 * Patch to modify ft_build.c to update flat device trees in place Patch by Matthew McClintock 26-June-2006
9396 commit 0267768eddc5ca7bc1865bc40c866829ac5efbfe
9397 Author: Matthew McClintock <msm@freescale.com>
9398 Date: Wed Jun 28 10:41:37 2006 -0500
9400 * Modify bootm command to support booting with flat device trees Patch by Matthew McClintock 26-June-2006
9402 commit 8fc8bd2cc479b6cd188fdede4010e0e052970b8a
9403 Author: John Traill <john.traill@freescale.com>
9404 Date: Wed Aug 9 14:33:50 2006 +0100
9406 Add Rapidio support for the MPC8641HPCN
9408 Signed-off-by: John Traill <john.traill@freescale.com>
9410 commit 91a414c7d1fb0eac912592cd995b30c9f23045c9
9411 Author: John Traill <john.traill@freescale.com>
9412 Date: Tue Aug 8 11:32:43 2006 +0100
9414 Fix caslat calculation
9416 Signed-off-by: John Traill <john.traill@freescale.com>
9418 commit 709d3073e74153278e7904a70819bbef7df50e1a
9419 Author: Jon Loeliger <jdl@freescale.com>
9420 Date: Thu Aug 3 16:17:56 2006 -0500
9422 Convert to mac-address in ethernet nodes.
9424 commit 71748af833ca1017edf1415be376366ff2937d17
9425 Author: Haiying Wang <haiying.wang@freescale.com>
9426 Date: Fri Jul 28 12:41:35 2006 -0400
9428 Correct the irq value of DUART2
9430 commit 9cb3e8816ae4d854e7dc22128c3eea3d70bb982c
9431 Author: Haiying Wang <haiying.wang@freescale.com>
9432 Date: Fri Jul 28 12:41:41 2006 -0400
9434 Change the space size of PEX IO in README
9436 commit 239db37c94f7a92941c4465feceb867c609241c5
9437 Author: Haiying Wang <haiying.wang@freescale.com>
9438 Date: Fri Jul 28 12:41:18 2006 -0400
9440 Move get_board_sys_clk to board directory
9442 commit 492900b985439fbce1a118afde1e35def870db03
9443 Author: John Traill <john.traill@freescale.com>
9444 Date: Fri Jul 28 09:03:54 2006 +0100
9446 Fix 8641HPCN pollution
9448 commit 515ab8a62e8574e2babc6e8dcc43544ad221c5b2
9449 Author: John Traill <john.traill@freescale.com>
9450 Date: Fri Jul 28 08:16:06 2006 +0100
9452 Fix 8641HPCN timebase
9454 commit c86360b830f1eecd7a72208575dde4f57879faea
9455 Author: Zhang Wei <wei.zhang@freescale.com>
9456 Date: Fri Jul 28 00:01:34 2006 +0800
9458 Fixed OF device tree of mpc86xxhpcn board.
9460 The changes works in with kernel irq mapping rework.
9462 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
9464 commit bea3f28d285942bf3f7ab339ce85178ded544225
9465 Author: Haiying Wang <haiying.wang@freescale.com>
9466 Date: Wed Jul 12 10:48:05 2006 -0400
9468 Add support for reading and writing mac addresses to or from ID EEPROM.
9470 Added code for reading and writing Mac addresses to/from ID EEPROM(0x57).
9471 With attached patch, we can use command "mac/mac read/mac save/"
9472 to read and write EEPROM under u-boot prompt.
9474 U-boot will calculate the checksum of EEPROM while bootup,
9475 if it is right, then u-boot will check whether the mac address
9476 of eTSEC0/1/2/3 is availalbe (non-zero).
9478 If there is mac address availabe in EEPROM, u-boot will use it,
9479 otherewise, u-boot will use the mac address defined in
9480 MPC8641HPCN.h. This matches the requirement to set unique mac address
9483 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
9484 Signed-off-by: York Sun <yorksun@freescale.com>
9486 commit fcb28e763415e0e4e66b0f45842d1557ae198e5e
9487 Author: Jin Zhengxiong <Jason.Jin@freescale.com>
9488 Date: Thu Jul 13 10:35:10 2006 -0500
9490 Fixed initrd issue by define big RAM
9492 Signed-off-by:Jason Jin <Jason.jin@freescale.com>
9494 commit e6cd2a1785d74ec3d30a86f1cb360be8de478151
9495 Author: Jason Jin <Jason.jin@freescale.com>
9496 Date: Fri Jul 7 10:01:45 2006 -0500
9498 We made a u-boot patch to fix the hang up issue
9499 when booting filesystem from ramdisk.
9501 Signed-off-by:Jason Jin <Jason.jin@freescale.com>
9503 commit 38433ccc5850ee70549af0b2bc5b920355ef5388
9504 Author: Matthew McClintock <msm@freescale.com>
9505 Date: Wed Jun 28 10:47:03 2006 -0500
9507 * Switched default PCI speed for 8540 ADS back to 33MHz
9508 * Added comments and a printf to warn that PCI-X won't
9510 Patch by Andy Fleming 17-Mar-2006
9512 Signed-off-by: Andy Fleming <afleming@freescale.com>
9514 commit e4c2a0eb0c3e3ffbf824800184ee42bdc99d5b19
9515 Author: Matthew McClintock <msm@freescale.com>
9516 Date: Wed Jun 28 10:46:35 2006 -0500
9518 * Fixed a bug where 8555 PCI code used the old variable and
9520 Patch by Andy Fleming 17-Mar-2006
9522 Signed-off-by: Andy Fleming <afleming@freescale.com>
9524 commit cbfc7ce756b88eb26e5537bc7b625c445c6dcfac
9525 Author: Matthew McClintock <msm@freescale.com>
9526 Date: Wed Jun 28 10:46:13 2006 -0500
9528 * Added VIA configuration table
9529 * Added support for PCI2 on CDS
9530 Patch by Andy Fleming 17-Mar-2006
9532 Signed-off-by: Andy Fleming <afleming@freescale.com>
9534 commit 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc
9535 Author: Matthew McClintock <msm@freescale.com>
9536 Date: Wed Jun 28 10:45:41 2006 -0500
9538 * Fixed PCI memory definitions
9539 Patch by Andy Fleming 17-Mar-2006
9541 Signed-off-by: Andy Fleming <afleming@freescale.com>
9543 commit 087454609e47295443af793a282cddcd91a5f49c
9544 Author: Matthew McClintock <msm@freescale.com>
9545 Date: Wed Jun 28 10:45:17 2006 -0500
9547 * Added support for initializing second PCI bus on 85xx
9548 Patch by Andy Fleming 17-Mar-2006
9550 Signed-off-by: Andy Fleming <afleming@freescale.com>
9552 commit b636aaeb6fd516a442fb611bbeeddf3077a687fb
9553 Author: Matthew McClintock <msm@freescale.com>
9554 Date: Wed Jun 28 10:44:49 2006 -0500
9556 * Added PCI-X #defines for PCI-X initialization
9557 Patch by Andy Fleming on 17-Mar-2006
9559 Signed-off-by: Andy Fleming <afleming@freescale.com>
9561 commit 20abbc6fffa115690107cc942c7abf84bdc03a1b
9562 Author: Matthew McClintock <msm@freescale.com>
9563 Date: Wed Jun 28 10:44:23 2006 -0500
9565 * Made sure the code which disables prefetch for PCI devices
9566 sets the size of the prefetch region to 0
9567 Patch by Andy Fleming on 17-Mar-2006
9569 Signed-off-by: Andy Fleming <afleming@freescale.com>
9571 commit 40d5fa35d02df22580593bf0039ab173367e8ef0
9572 Author: Matthew McClintock <msm@freescale.com>
9573 Date: Wed Jun 28 10:43:36 2006 -0500
9575 * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards
9576 Patch by Jon Loeliger 17-Jan-2006
9578 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9580 commit be7e8b0cb5a0c49dc180075b96df296a893bf146
9581 Author: Matthew McClintock <msm@freescale.com>
9582 Date: Wed Jun 28 10:43:00 2006 -0500
9584 * Removed the oftree.dts for stxxtx in light of the changes
9585 to the flat device tree handling code
9586 Patch by Matthew McClintock 26-June-2006
9588 commit 1b380ec225665e73959677f3893dc658c5925e05
9589 Author: Matthew McClintock <msm@freescale.com>
9590 Date: Wed Jun 28 10:42:24 2006 -0500
9592 * Patch to modify ft_build.c to update flat device trees in place
9593 Patch by Matthew McClintock 26-June-2006
9595 commit 98a9c4d468a942a09ebe8979bec508017f3e4462
9596 Author: Matthew McClintock <msm@freescale.com>
9597 Date: Wed Jun 28 10:41:37 2006 -0500
9599 * Modify bootm command to support booting with flat device trees
9600 Patch by Matthew McClintock 26-June-2006
9602 commit da012ab661fd4ab169dd7b9b32201a4df62cf34a
9603 Author: Jin Zhengxiong <Jason.Jin@freescale.com>
9604 Date: Wed Jun 28 08:43:56 2006 -0500
9606 Change Id to symbolic name for RTL8139
9608 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
9610 commit bc09cf3c2bfb8d54c659cbb332f79d0950982fd0
9611 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
9612 Date: Tue Jun 27 18:12:10 2006 +0800
9614 Fix RTL8139 in big endian
9616 signed-off-by: Jason Jin <Jason.Jin@freescale.com>
9617 signed-off-by: Wei Zhang <wei.zhang@freescale.com>
9619 commit fcfb9a57947fc203b99fe81ab0578f7286261f9f
9620 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
9621 Date: Tue Jun 27 18:12:23 2006 +0800
9623 Fix Tsec bug when no link
9625 When tftp a non-exist file from the tftp server, u-boot will check
9626 the link of all eth port. The original file will return wrong link
9627 state on the no link ports.
9629 signed-off-by: Jason Jin <Jason.Jin@freescale.com>
9631 commit bd22c2b97514fbfb0e03bd9c72b3445e4dbd57e2
9632 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
9633 Date: Tue Jun 27 18:12:02 2006 +0800
9635 Fix bug for io_bar size during pci scan
9637 During the pci scan process, Some devices return bar_reponse with the
9638 highest bytes 0, such as the pci bridge in uli1575 return bar_response
9639 with 0xffffff, So the bar_size should be manually set under 64K.
9641 Signed-off-by: Jason Jin <jason.jin@freescale.com>
9643 commit fa7db9c377bc2353a17bf1d381d65a6c418728f0
9644 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
9645 Date: Tue Jun 27 18:11:54 2006 +0800
9647 Enable PCIE1 for MPC8641HPCN board
9649 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
9651 commit 99d70e3a47affb9bae041a2caece7cd516e213b3
9652 Author: Wolfgang Denk <wd@pollux.denx.de>
9653 Date: Mon Jun 26 11:06:00 2006 +0200
9657 commit 684623ce92c5fd32e7db2d6e016945a67c5ffaba
9658 Author: Jon Loeliger <jdl@freescale.com>
9659 Date: Thu Jun 22 08:51:46 2006 -0500
9661 Fix bug in 8641hpcn reset command with no args.
9663 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
9664 Acked-by: Jon Loeliger <jdl@freescale.com>
9666 commit 8be429a5ddbf0ebe2d94174ba58fcfc7a24285dc
9667 Author: Zhang Wei <wei.zhang@freescale.com>
9668 Date: Tue Jun 20 17:47:15 2006 +0800
9670 Reworked IRQ mapping in OF-tree.
9672 commit 0e4c2a17ca34001ed36d259f13cb88ada4611a8c
9673 Author: Jon Loeliger <jdl@freescale.com>
9674 Date: Thu Jun 15 21:33:37 2006 -0500
9676 Do not enable address translation on secondary CPUs.
9677 Do not set up BATs on secondary CPUs. Let Linux do the nasty.
9679 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9681 commit 386eda022473394ad8f36b86f2bdc9b4cb816291
9682 Author: Wolfgang Denk <wd@pollux.denx.de>
9683 Date: Wed Jun 14 18:14:56 2006 +0200
9687 commit 16c8d5e76ae0f78f39a60608574adfe0feb9cc70
9688 Author: Wolfgang Denk <wd@pollux.denx.de>
9689 Date: Wed Jun 14 17:45:53 2006 +0200
9691 Various USB related patches
9692 - Add support for mpc8xx USB device.
9693 - Add support for Common Device Class - Abstract Control Model USB console.
9694 - Add support for flow control in USB slave devices.
9695 - Add support for switching between gserial and cdc_acm using environment.
9696 - Minor changes to usbdcore_omap1510.c usbdcore_omap1510.h
9697 - Update usbcore slightly to ease host enumeration.
9698 - Fix non-portable endian problems in usbdcore and usbdcore_ep0.
9699 - Add AdderUSB_config as a defconfig to enable usage of the USB console
9700 by default with the Adder87x U-Boot port.
9701 Patches by Bryan O'Donoghue <bodonoghue@codehermit.ie>, 29 May 2006
9703 commit 8ecc971618f56029ad99d3516f8b297a6ed58971
9704 Author: Jon Loeliger <jdl@jdl.com>
9705 Date: Wed Jun 7 10:53:55 2006 -0500
9707 Fix a get_board_sys_clk() use-before-def warning.
9709 Signed-off-by: Jon Loeliger <jdl@jdl.com>
9711 commit d9bf4858fca5aa4d651b283270f77da72ebadfd5
9712 Author: Jon Loeliger <jdl@jdl.com>
9713 Date: Wed Jun 7 10:52:49 2006 -0500
9715 Allow DTC path to be passed in.
9717 Signed-off-by: Jon Loeliger <jdl@jdl.com>
9719 commit c83ae9ea6d93abbe751bf8a3396236a084e56f87
9720 Author: Haiying Wang <haiying.wang@freescale.com>
9721 Date: Tue Jun 6 16:54:29 2006 -0400
9723 Modify the IRQ of DUART2
9725 commit c934f655f9aeca70a5c5f88b465d9e9d57a8d22e
9726 Author: Jon Loeliger <jdl@jdl.com>
9727 Date: Wed May 31 13:55:35 2006 -0500
9731 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9733 commit cb5965fb95b77a49f4e6af95248e0c849f4af03e
9734 Author: Jon Loeliger <jdl@jdl.com>
9735 Date: Wed May 31 12:44:44 2006 -0500
9737 White space cleanup.
9738 Some 80-column cleanups.
9739 Convert printf() to puts() where possible.
9740 Use #include "spd_sdram.h" as needed.
9741 Enhanced reset command usage message a bit.
9743 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9745 commit 3d5c5be547445dd3bd2eb7368d80df03ea437970
9746 Author: Jon Loeliger <jdl@jdl.com>
9747 Date: Wed May 31 11:39:34 2006 -0500
9749 Removed unneeded local_bus_init() from 8641HPCN board.
9751 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9753 commit 4d3d729c16c392d2982d3266b659d333c927697d
9754 Author: Jon Loeliger <jdl@jdl.com>
9755 Date: Wed May 31 11:24:28 2006 -0500
9757 Moved mpc8641hpcn_board_reset() out of cpu/ into board/.
9759 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9761 commit b2a941de060350ad15878d8219825f4950e9bb8e
9762 Author: Jon Loeliger <jdl@jdl.com>
9763 Date: Wed May 31 10:07:28 2006 -0500
9765 Remove dead debug code.
9767 Signed-off-by: Jon Loeliger <jdl@jdl.com>
9769 commit 126aa70f10ba3d20e0a6f4d32328250513b77770
9770 Author: Jon Loeliger <jdl@freescale.com>
9771 Date: Tue May 30 17:47:00 2006 -0500
9773 Move mpc86xx PIXIS code to board directory
9775 First cut at moving the PIXIS platform code out of
9776 the 86xx cpu directory and into board/mpc8641hpcn
9779 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9781 commit ddf83a2fcef1a670c45fc585119dcc1fe062c4a9
9782 Author: Markus Klotzbuecher <mk@denx.de>
9783 Date: Tue May 30 16:56:14 2006 +0200
9785 Support generic OHCI support for the s3c24x0 cpu.
9787 commit 38cee12dcfcc257371c901c7e13e58ecab0a35d8
9788 Author: Haiying Wang <Haiying.Wang@freescale.com>
9789 Date: Tue May 30 09:10:32 2006 -0500
9791 Improve "reset" command's interaction with watchdog.
9793 "reset altbank" will reset another bank WITHOUT watch dog timer enabled
9794 "reset altbank wd" will reset another bank WITH watch dog enabled
9795 "diswd" will disable watch dog after u-boot boots up successfully
9797 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
9799 commit 70205e5a6ddc8528b11db9eb4d3fa0209d9fce2a
9800 Author: Haiying Wang <Haiying.Wang@freescale.com>
9801 Date: Tue May 30 08:51:19 2006 -0500
9803 Fix two SDRAM setup bugs.
9806 Enable 1T/2T based on number of DIMMs present.
9808 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
9810 commit d11fec5015334deb2010e36ce00bb118cc5429a5
9811 Author: Haiying Wang <Haiying.Wang@freescale.com>
9812 Date: Fri May 26 10:24:48 2006 -0500
9814 Add first draft of the MPC8641HPCN doc/README.
9816 Signed-off-by: Jon Loeliger <jdl@jdl.com>
9818 commit ed45d6c930b5939718a87ee12e25cf9a05978d4a
9819 Author: Haiying Wang <Haiying.Wang@freescale.com>
9820 Date: Fri May 26 10:13:04 2006 -0500
9822 Added pci@8000 block.
9823 Updated ethernet interrupt mappings (moved up 48).
9824 Cleaned up a few comments.
9826 Signed-off-by: Jon Loeliger <jdl@jdl.com>
9828 commit 3033ebb20fd7c372c7bca3c9955a4692bb2240b7
9829 Author: Haiying Wang <Haiying.Wang@freescale.com>
9830 Date: Fri May 26 10:01:16 2006 -0500
9832 Allow args on reset command.
9834 Signed-off-by: Jon Loeliger <jdl@jdl.com>
9836 commit 301f1aa384d0edcae6a22fd9adb933ad71695ecc
9837 Author: Markus Klotzbuecher <mk@denx.de>
9838 Date: Tue May 23 13:38:35 2006 +0200
9840 Changed the mp2usb (at91rm9200) board to use the generic OHCI driver. Some
9841 fixes to the latter.
9843 commit 24e37645e7378b20fa8f20e2996c8fb8e90c70c9
9844 Author: Markus Klotzbuecher <mk@denx.de>
9845 Date: Tue May 23 10:33:11 2006 +0200
9847 More cleanup for the delta board and the generic usb_ohci driver. Added
9848 CFG_USB_BOARD_INIT and CFG_USB_CPU_INIT for enabling board and cpu specific
9849 initialization and cleanup hooks respectively.
9851 commit 3e326ece9eba8184f5d48aa4fb87760a8f6f0f10
9852 Author: Markus Klotzbuecher <mk@denx.de>
9853 Date: Mon May 22 16:33:54 2006 +0200
9855 This patch adds USB storage support for the delta board. This is the first
9856 board to make use of a generic OHCI driver, that calls hooks for board
9857 dependant initialization.
9859 commit 14e37081ff3cac7ebe6e93836523429853b6b292
9860 Author: Jon Loeliger <jdl@jdl.com>
9861 Date: Fri May 19 13:28:39 2006 -0500
9863 Change arbitration to round-robin for SMP linux.
9865 commit 9a655876e5995be80f49054e2509500e871e4d3a
9866 Author: Jon Loeliger <jdl@jdl.com>
9867 Date: Fri May 19 13:26:34 2006 -0500
9869 Enable dual DDR controllers and interleaving.
9871 commit 586d1d5abd3e525f1e1d9b81e5a61a4da6b2fa3c
9872 Author: Jon Loeliger <jdl@jdl.com>
9873 Date: Fri May 19 13:22:44 2006 -0500
9875 Update 86xx address map and LAWBARs.
9877 commit cccce5d0581bb0ba4602799a4b5112e58d1579cb
9878 Author: Jon Loeliger <jdl@jdl.com>
9879 Date: Fri May 19 13:14:15 2006 -0500
9881 Remove L2 Cache invalidate polling.
9883 commit f35ec68fb066cec0e36294bfe07dec2d4e8ad3a8
9884 Author: Jon Loeliger <jdl@jdl.com>
9885 Date: Fri May 19 12:33:09 2006 -0500
9887 Enable 2nd CPU and I2C.
9889 commit bf690dcb512d34c4fceec0eb1e5c0e88a9db5d54
9890 Author: Jon Loeliger <jdl@freescale.com>
9891 Date: Mon May 15 07:26:56 2006 -0500
9893 Update interrupt mapping.
9895 commit 6cfea33477b04b63ed47386ed1629529484c33ba
9896 Author: Haiying Wang <Haiying.Wang@freescale.com>
9897 Date: Wed May 10 09:38:06 2006 -0500
9899 Remove unneeded INIT_RAM_LOCK cache twiddling.
9900 Correctly tracks r29 as global data pointer now.
9902 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
9904 commit d4dd317b58c126a2a7e73f4764ecc1a7c97f876c
9905 Author: Jon Loeliger <jdl@freescale.com>
9906 Date: Wed May 10 09:33:07 2006 -0500
9908 Remove unnecessary flash.c file.
9910 commit 18b6c8cd8af6cc7f35180cedc4adb3236cc1a1b8
9911 Author: Jon Loeliger <jdl@freescale.com>
9912 Date: Tue May 9 08:23:49 2006 -0500
9914 Get MPC8641HPCN flash images working.
9916 Enable the CFI driver.
9917 Remove bogus LAWBAR7 cruft.
9918 Use correct TEXT_BASE, Fixup load script.
9919 Enable SPD EEPROM during DDR setup.
9920 Use generic RFC 1918 IP addresses by default.
9922 commit 5c9efb36a6b5431423f52888a0e3b4b515fe7eca
9923 Author: Jon Loeliger <jdl@freescale.com>
9924 Date: Thu Apr 27 10:15:16 2006 -0500
9926 Cleanup whitespaces and style issues.
9927 Removed //-style comments.
9928 Use 80-column lines.
9929 Remove trailing whitespace.
9930 Remove dead code and debug cruft.
9932 commit a2320a6bf8113a09544c42d160d10ac69d049a03
9933 Author: Jon Loeliger <jdl@freescale.com>
9934 Date: Thu Apr 27 08:22:39 2006 -0500
9936 Revert bad PCI prefetch limit change.
9938 commit debb7354d1ea4f694154818df5e5b523f5c1cc1d
9939 Author: Jon Loeliger <jdl@freescale.com>
9940 Date: Wed Apr 26 17:58:56 2006 -0500
9942 Initial support for MPC8641 HPCN board.