2 FreeRTOS.org V5.3.0 - Copyright (C) 2003-2009 Richard Barry.
\r
4 This file is part of the FreeRTOS.org distribution.
\r
6 FreeRTOS.org is free software; you can redistribute it and/or modify it
\r
7 under the terms of the GNU General Public License (version 2) as published
\r
8 by the Free Software Foundation and modified by the FreeRTOS exception.
\r
9 **NOTE** The exception to the GPL is included to allow you to distribute a
\r
10 combined work that includes FreeRTOS.org without being obliged to provide
\r
11 the source code for any proprietary components. Alternative commercial
\r
12 license and support terms are also available upon request. See the
\r
13 licensing section of http://www.FreeRTOS.org for full details.
\r
15 FreeRTOS.org is distributed in the hope that it will be useful, but WITHOUT
\r
16 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
\r
17 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
\r
20 You should have received a copy of the GNU General Public License along
\r
21 with FreeRTOS.org; if not, write to the Free Software Foundation, Inc., 59
\r
22 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
\r
25 ***************************************************************************
\r
27 * Get the FreeRTOS eBook! See http://www.FreeRTOS.org/Documentation *
\r
29 * This is a concise, step by step, 'hands on' guide that describes both *
\r
30 * general multitasking concepts and FreeRTOS specifics. It presents and *
\r
31 * explains numerous examples that are written using the FreeRTOS API. *
\r
32 * Full source code for all the examples is provided in an accompanying *
\r
35 ***************************************************************************
\r
39 Please ensure to read the configuration and relevant port sections of the
\r
40 online documentation.
\r
42 http://www.FreeRTOS.org - Documentation, latest information, license and
\r
45 http://www.SafeRTOS.com - A version that is certified for use in safety
\r
48 http://www.OpenRTOS.com - Commercial support, development, porting,
\r
49 licensing and training services.
\r
53 NOTE : Tasks run in system mode and the scheduler runs in Supervisor mode.
\r
54 The processor MUST be in supervisor mode when vTaskStartScheduler is
\r
55 called. The demo applications included in the FreeRTOS.org download switch
\r
56 to supervisor mode prior to main being called. If you are not using one of
\r
57 these demo application projects then ensure Supervisor mode is used.
\r
62 * Creates all the demo application tasks, then starts the scheduler. The WEB
\r
63 * documentation provides more details of the demo application tasks.
\r
65 * Main.c also creates a task called "Check". This only executes every three
\r
66 * seconds but has the highest priority so is guaranteed to get processor time.
\r
67 * Its main function is to check that all the other tasks are still operational.
\r
68 * Each task (other than the "flash" tasks) maintains a unique count that is
\r
69 * incremented each time the task successfully completes its function. Should
\r
70 * any error occur within such a task the count is permanently halted. The
\r
71 * check task inspects the count of each task to ensure it has changed since
\r
72 * the last time the check task executed. If all the count variables have
\r
73 * changed all the tasks are still executing error free, and the check task
\r
74 * toggles the onboard LED. Should any task contain an error at any time
\r
75 * the LED toggle rate will change from 3 seconds to 500ms.
\r
77 * To check the operation of the memory allocator the check task also
\r
78 * dynamically creates a task before delaying, and deletes it again when it
\r
79 * wakes. If memory cannot be allocated for the new task the call to xTaskCreate
\r
80 * will fail and an error is signalled. The dynamically created task itself
\r
81 * allocates and frees memory just to give the allocator a bit more exercise.
\r
85 /* Standard includes. */
\r
89 /* Scheduler includes. */
\r
90 #include "FreeRTOS.h"
\r
93 /* Demo application includes. */
\r
94 #include "partest.h"
\r
96 #include "integer.h"
\r
98 #include "comtest2.h"
\r
99 #include "semtest.h"
\r
101 #include "dynamic.h"
\r
102 #include "BlockQ.h"
\r
103 #include "serial.h"
\r
105 /* Hardware specific definitions. */
\r
109 /*-----------------------------------------------------------*/
\r
111 /* Constants for the ComTest tasks. */
\r
112 #define mainCOM_TEST_BAUD_RATE ( ( unsigned portLONG ) 115200 )
\r
113 #define mainCOM_TEST_LED ( 5 )
\r
115 /* Priorities for the demo application tasks. */
\r
116 #define mainLED_TASK_PRIORITY ( tskIDLE_PRIORITY + 3 )
\r
117 #define mainCOM_TEST_PRIORITY ( tskIDLE_PRIORITY + 2 )
\r
118 #define mainQUEUE_POLL_PRIORITY ( tskIDLE_PRIORITY + 2 )
\r
119 #define mainCHECK_TASK_PRIORITY ( tskIDLE_PRIORITY + 4 )
\r
120 #define mainSEM_TEST_PRIORITY ( tskIDLE_PRIORITY + 1 )
\r
121 #define mainBLOCK_Q_PRIORITY ( tskIDLE_PRIORITY + 2 )
\r
123 /* The rate at which the on board LED will toggle when there is/is not an
\r
125 #define mainNO_ERROR_FLASH_PERIOD ( ( portTickType ) 3000 / portTICK_RATE_MS )
\r
126 #define mainERROR_FLASH_PERIOD ( ( portTickType ) 500 / portTICK_RATE_MS )
\r
127 #define mainON_BOARD_LED_BIT ( ( unsigned portLONG ) 7 )
\r
129 /* Constants used by the vMemCheckTask() task. */
\r
130 #define mainCOUNT_INITIAL_VALUE ( ( unsigned portLONG ) 0 )
\r
131 #define mainNO_TASK ( 0 )
\r
133 /* The size of the memory blocks allocated by the vMemCheckTask() task. */
\r
134 #define mainMEM_CHECK_SIZE_1 ( ( size_t ) 51 )
\r
135 #define mainMEM_CHECK_SIZE_2 ( ( size_t ) 52 )
\r
136 #define mainMEM_CHECK_SIZE_3 ( ( size_t ) 151 )
\r
138 #define MAX_WAIT_STATES 8
\r
139 static const unsigned portLONG ululCSRWaitValues[ MAX_WAIT_STATES + 1 ] =
\r
141 WaitState1,/* There is no "zero wait state" value, so use one wait state */
\r
151 /*-----------------------------------------------------------*/
\r
154 * Checks that all the demo application tasks are still executing without error
\r
155 * - as described at the top of the file.
\r
157 static portLONG prvCheckOtherTasksAreStillRunning( unsigned portLONG ulMemCheckTaskCount );
\r
160 * The task that executes at the highest priority and calls
\r
161 * prvCheckOtherTasksAreStillRunning(). See the description at the top
\r
164 static void vErrorChecks( void *pvParameters );
\r
167 * Dynamically created and deleted during each cycle of the vErrorChecks()
\r
168 * task. This is done to check the operation of the memory allocator.
\r
169 * See the top of vErrorChecks for more details.
\r
171 static void vMemCheckTask( void *pvParameters );
\r
174 * Configure the processor for use with the Olimex demo board. This includes
\r
175 * setup for the I/O, system clock, and access timings.
\r
177 static void prvSetupHardware( void );
\r
179 /*-----------------------------------------------------------*/
\r
182 * Starts all the other tasks, then starts the scheduler.
\r
186 /* Setup the hardware for use with the Olimex demo board. */
\r
187 prvSetupHardware();
\r
189 /* Start the demo/test application tasks. */
\r
190 vStartIntegerMathTasks( tskIDLE_PRIORITY );
\r
191 vAltStartComTestTasks( mainCOM_TEST_PRIORITY, mainCOM_TEST_BAUD_RATE, mainCOM_TEST_LED );
\r
192 vStartLEDFlashTasks( mainLED_TASK_PRIORITY );
\r
193 vStartPolledQueueTasks( mainQUEUE_POLL_PRIORITY );
\r
194 vStartMathTasks( tskIDLE_PRIORITY );
\r
195 vStartSemaphoreTasks( mainSEM_TEST_PRIORITY );
\r
196 vStartDynamicPriorityTasks();
\r
197 vStartBlockingQueueTasks( mainBLOCK_Q_PRIORITY );
\r
199 /* Start the check task - which is defined in this file. */
\r
200 xTaskCreate( vErrorChecks, ( signed portCHAR * ) "Check", configMINIMAL_STACK_SIZE, NULL, mainCHECK_TASK_PRIORITY, NULL );
\r
202 /* Now all the tasks have been started - start the scheduler.
\r
204 NOTE : Tasks run in system mode and the scheduler runs in Supervisor mode.
\r
205 The processor MUST be in supervisor mode when vTaskStartScheduler is
\r
206 called. The demo applications included in the FreeRTOS.org download switch
\r
207 to supervisor mode prior to main being called. If you are not using one of
\r
208 these demo application projects then ensure Supervisor mode is used here. */
\r
209 vTaskStartScheduler();
\r
211 /* Should never reach here! */
\r
214 /*-----------------------------------------------------------*/
\r
216 static void vErrorChecks( void *pvParameters )
\r
218 portTickType xDelayPeriod = mainNO_ERROR_FLASH_PERIOD;
\r
219 unsigned portLONG ulMemCheckTaskRunningCount;
\r
220 xTaskHandle xCreatedTask;
\r
222 /* Cycle for ever, delaying then checking all the other tasks are still
\r
223 operating without error. If an error is detected then the delay period
\r
224 is decreased from mainNO_ERROR_FLASH_PERIOD to mainERROR_FLASH_PERIOD so
\r
225 the on board LED flash rate will increase.
\r
227 In addition to the standard tests the memory allocator is tested through
\r
228 the dynamic creation and deletion of a task each cycle. Each time the
\r
229 task is created memory must be allocated for its stack. When the task is
\r
230 deleted this memory is returned to the heap. If the task cannot be created
\r
231 then it is likely that the memory allocation failed. */
\r
235 /* Reset xCreatedTask. This is modified by the task about to be
\r
236 created so we can tell if it is executing correctly or not. */
\r
237 xCreatedTask = mainNO_TASK;
\r
239 /* Dynamically create a task - passing ulMemCheckTaskRunningCount as a
\r
241 ulMemCheckTaskRunningCount = mainCOUNT_INITIAL_VALUE;
\r
242 if( xTaskCreate( vMemCheckTask, ( signed portCHAR * ) "MEM_CHECK", configMINIMAL_STACK_SIZE, ( void * ) &ulMemCheckTaskRunningCount, tskIDLE_PRIORITY, &xCreatedTask ) != pdPASS )
\r
244 /* Could not create the task - we have probably run out of heap. */
\r
245 xDelayPeriod = mainERROR_FLASH_PERIOD;
\r
248 /* Delay until it is time to execute again. */
\r
249 vTaskDelay( xDelayPeriod );
\r
251 /* Delete the dynamically created task. */
\r
252 if( xCreatedTask != mainNO_TASK )
\r
254 vTaskDelete( xCreatedTask );
\r
257 /* Check all the standard demo application tasks are executing without
\r
258 error. ulMemCheckTaskRunningCount is checked to ensure it was
\r
259 modified by the task just deleted. */
\r
260 if( prvCheckOtherTasksAreStillRunning( ulMemCheckTaskRunningCount ) != pdPASS )
\r
262 /* An error has been detected in one of the tasks - flash faster. */
\r
263 xDelayPeriod = mainERROR_FLASH_PERIOD;
\r
266 /* The toggle rate of the LED depends on how long this task delays for.
\r
267 An error reduces the delay period and so increases the toggle rate. */
\r
268 vParTestToggleLED( mainON_BOARD_LED_BIT );
\r
271 /*-----------------------------------------------------------*/
\r
273 static void prvSetupHardware( void )
\r
277 #ifdef RUN_FROM_ROM
\r
279 portFLOAT nsecsPerClockTick;
\r
280 portLONG lNumWaitStates;
\r
281 unsigned portLONG ulCSRWaitValue;
\r
283 /* We are compiling to run from ROM (either on-chip or off-chip flash).
\r
284 Leave the RAM/flash mapped the way they are on reset
\r
285 (flash @ 0x00000000, RAM @ 0x00300000), and set up the
\r
286 proper flash wait states (starts out at the maximum number
\r
287 of wait states on reset, so we should be able to reduce it).
\r
288 Most of this code will probably get removed by the compiler
\r
289 if optimization is enabled, since these calculations are
\r
290 based on constants. But the compiler should still produce
\r
291 a correct wait state register value. */
\r
292 nsecsPerClockTick = ( portFLOAT ) 1000000000 / configCPU_CLOCK_HZ;
\r
293 lNumWaitStates = ( portLONG )( ( configFLASH_SPEED_NSEC / nsecsPerClockTick ) + 0.5 ) - 1;
\r
295 if( lNumWaitStates < 0 )
\r
297 lNumWaitStates = 0;
\r
300 if( lNumWaitStates > MAX_WAIT_STATES )
\r
302 lNumWaitStates = MAX_WAIT_STATES;
\r
305 ulCSRWaitValue = ululCSRWaitValues[ lNumWaitStates ];
\r
306 ulCSRWaitValue = WaitState5;
\r
308 AT91C_BASE_EBI->EBI_CSR[ 0 ] = ulCSRWaitValue | DataBus16 | WaitStateEnable
\r
309 | PageSize1M | tDF_0cycle
\r
310 | ByteWriteAccessType | CSEnable
\r
311 | 0x00000000 /* Base Address */;
\r
313 #else /* else we are compiling to run from on-chip RAM */
\r
315 /* If compiling to run from RAM, we expect the on-chip RAM to already
\r
316 be mapped at 0x00000000. This is typically done with an initialization
\r
317 script for the JTAG emulator you are using to download and run the
\r
318 demo application. So there is nothing to do here in this case. */
\r
322 /* Disable all interrupts at the AIC level initially... */
\r
323 AT91C_BASE_AIC->AIC_IDCR = 0xFFFFFFFF;
\r
325 /* Set all SVR and SMR entries to default values (start with a clean slate)... */
\r
326 for( lCount = 0; lCount < 32; lCount++ )
\r
328 AT91C_BASE_AIC->AIC_SVR[ lCount ] = (unsigned long) 0;
\r
329 AT91C_BASE_AIC->AIC_SMR[ lCount ] = AIC_SRCTYPE_INT_EDGE_TRIGGERED;
\r
332 /* Disable clocks to all peripherals initially... */
\r
333 AT91C_BASE_PS->PS_PCDR = 0xFFFFFFFF;
\r
335 /* Clear all interrupts at the AIC level initially... */
\r
336 AT91C_BASE_AIC->AIC_ICCR = 0xFFFFFFFF;
\r
338 /* Perform 8 "End Of Interrupt" cmds to make sure AIC will not Lock out
\r
340 for( lCount = 0; lCount < 8; lCount++ )
\r
342 AT91C_BASE_AIC->AIC_EOICR = 0;
\r
345 /* Initialise LED outputs. */
\r
346 vParTestInitialise();
\r
348 /*-----------------------------------------------------------*/
\r
350 static portLONG prvCheckOtherTasksAreStillRunning( unsigned portLONG ulMemCheckTaskCount )
\r
352 portLONG lReturn = ( portLONG ) pdPASS;
\r
354 /* Check all the demo tasks (other than the flash tasks) to ensure
\r
355 that they are all still running, and that none of them have detected
\r
358 if( xAreIntegerMathsTaskStillRunning() != pdTRUE )
\r
360 lReturn = ( portLONG ) pdFAIL;
\r
363 if( xAreComTestTasksStillRunning() != pdTRUE )
\r
365 lReturn = ( portLONG ) pdFAIL;
\r
368 if( xArePollingQueuesStillRunning() != pdTRUE )
\r
370 lReturn = ( portLONG ) pdFAIL;
\r
373 if( xAreMathsTaskStillRunning() != pdTRUE )
\r
375 lReturn = ( portLONG ) pdFAIL;
\r
378 if( xAreSemaphoreTasksStillRunning() != pdTRUE )
\r
380 lReturn = ( portLONG ) pdFAIL;
\r
383 if( xAreDynamicPriorityTasksStillRunning() != pdTRUE )
\r
385 lReturn = ( portLONG ) pdFAIL;
\r
388 if( xAreBlockingQueuesStillRunning() != pdTRUE )
\r
390 lReturn = ( portLONG ) pdFAIL;
\r
393 if( ulMemCheckTaskCount == mainCOUNT_INITIAL_VALUE )
\r
395 /* The vMemCheckTask did not increment the counter - it must
\r
397 lReturn = ( portLONG ) pdFAIL;
\r
402 /*-----------------------------------------------------------*/
\r
404 static void vMemCheckTask( void *pvParameters )
\r
406 unsigned portLONG *pulMemCheckTaskRunningCounter;
\r
407 void *pvMem1, *pvMem2, *pvMem3;
\r
408 static portLONG lErrorOccurred = pdFALSE;
\r
410 /* This task is dynamically created then deleted during each cycle of the
\r
411 vErrorChecks task to check the operation of the memory allocator. Each time
\r
412 the task is created memory is allocated for the stack and TCB. Each time
\r
413 the task is deleted this memory is returned to the heap. This task itself
\r
414 exercises the allocator by allocating and freeing blocks.
\r
416 The task executes at the idle priority so does not require a delay.
\r
418 pulMemCheckTaskRunningCounter is incremented each cycle to indicate to the
\r
419 vErrorChecks() task that this task is still executing without error. */
\r
421 pulMemCheckTaskRunningCounter = ( unsigned portLONG * ) pvParameters;
\r
425 if( lErrorOccurred == pdFALSE )
\r
427 /* We have never seen an error so increment the counter. */
\r
428 ( *pulMemCheckTaskRunningCounter )++;
\r
432 /* There has been an error so reset the counter so the check task
\r
433 can tell that an error occurred. */
\r
434 *pulMemCheckTaskRunningCounter = mainCOUNT_INITIAL_VALUE;
\r
437 /* Allocate some memory - just to give the allocator some extra
\r
438 exercise. This has to be in a critical section to ensure the
\r
439 task does not get deleted while it has memory allocated. */
\r
442 pvMem1 = pvPortMalloc( mainMEM_CHECK_SIZE_1 );
\r
443 if( pvMem1 == NULL )
\r
445 lErrorOccurred = pdTRUE;
\r
449 memset( pvMem1, 0xaa, mainMEM_CHECK_SIZE_1 );
\r
450 vPortFree( pvMem1 );
\r
455 /* Again - with a different size block. */
\r
458 pvMem2 = pvPortMalloc( mainMEM_CHECK_SIZE_2 );
\r
459 if( pvMem2 == NULL )
\r
461 lErrorOccurred = pdTRUE;
\r
465 memset( pvMem2, 0xaa, mainMEM_CHECK_SIZE_2 );
\r
466 vPortFree( pvMem2 );
\r
471 /* Again - with a different size block. */
\r
474 pvMem3 = pvPortMalloc( mainMEM_CHECK_SIZE_3 );
\r
475 if( pvMem3 == NULL )
\r
477 lErrorOccurred = pdTRUE;
\r
481 memset( pvMem3, 0xaa, mainMEM_CHECK_SIZE_3 );
\r
482 vPortFree( pvMem3 );
\r