2 FreeRTOS.org V5.1.0 - Copyright (C) 2003-2008 Richard Barry.
\r
4 This file is part of the FreeRTOS.org distribution.
\r
6 FreeRTOS.org is free software; you can redistribute it and/or modify
\r
7 it under the terms of the GNU General Public License as published by
\r
8 the Free Software Foundation; either version 2 of the License, or
\r
9 (at your option) any later version.
\r
11 FreeRTOS.org is distributed in the hope that it will be useful,
\r
12 but WITHOUT ANY WARRANTY; without even the implied warranty of
\r
13 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
\r
14 GNU General Public License for more details.
\r
16 You should have received a copy of the GNU General Public License
\r
17 along with FreeRTOS.org; if not, write to the Free Software
\r
18 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
\r
20 A special exception to the GPL can be applied should you wish to distribute
\r
21 a combined work that includes FreeRTOS.org, without being obliged to provide
\r
22 the source code for any proprietary components. See the licensing section
\r
23 of http://www.FreeRTOS.org for full details of how and when the exception
\r
26 ***************************************************************************
\r
27 ***************************************************************************
\r
29 * SAVE TIME AND MONEY! We can port FreeRTOS.org to your own hardware, *
\r
30 * and even write all or part of your application on your behalf. *
\r
31 * See http://www.OpenRTOS.com for details of the services we provide to *
\r
32 * expedite your project. *
\r
34 ***************************************************************************
\r
35 ***************************************************************************
\r
37 Please ensure to read the configuration and relevant port sections of the
\r
38 online documentation.
\r
40 http://www.FreeRTOS.org - Documentation, latest information, license and
\r
43 http://www.SafeRTOS.com - A version that is certified for use in safety
\r
46 http://www.OpenRTOS.com - Commercial support, development, porting,
\r
47 licensing and training services.
\r
51 NOTE : Tasks run in system mode and the scheduler runs in Supervisor mode.
\r
52 The processor MUST be in supervisor mode when vTaskStartScheduler is
\r
53 called. The demo applications included in the FreeRTOS.org download switch
\r
54 to supervisor mode prior to main being called. If you are not using one of
\r
55 these demo application projects then ensure Supervisor mode is used.
\r
59 * Creates all the demo application tasks, then starts the scheduler. The WEB
\r
60 * documentation provides more details of the demo application tasks. The SAM7
\r
61 * includes a sample USB that emulates a Joystick input to a USB host.
\r
63 * Main.c also creates a task called "Check". This only executes every three
\r
64 * seconds but has the highest priority so is guaranteed to get processor time.
\r
65 * Its main function is to check that all the other tasks are still operational.
\r
66 * Each task (other than the "flash" tasks) maintains a unique count that is
\r
67 * incremented each time the task successfully completes its function. Should
\r
68 * any error occur within such a task the count is permanently halted. The
\r
69 * check task inspects the count of each task to ensure it has changed since
\r
70 * the last time the check task executed. If all the count variables have
\r
71 * changed all the tasks are still executing error free, and the check task
\r
72 * toggles the onboard LED. Should any task contain an error at any time
\r
73 * the LED toggle rate will change from 3 seconds to 500ms.
\r
77 /* Standard includes. */
\r
80 /* Scheduler includes. */
\r
81 #include "FreeRTOS.h"
\r
84 /* Demo application includes. */
\r
86 #include "integer.h"
\r
89 #include "semtest.h"
\r
90 #include "dynamic.h"
\r
91 #include "partest.h"
\r
92 #include "comtest2.h"
\r
93 #include "USB/USBSample.h"
\r
95 /* Priorities for the demo application tasks. */
\r
96 #define mainLED_TASK_PRIORITY ( tskIDLE_PRIORITY + 3 )
\r
97 #define mainQUEUE_POLL_PRIORITY ( tskIDLE_PRIORITY + 2 )
\r
98 #define mainCHECK_TASK_PRIORITY ( tskIDLE_PRIORITY + 4 )
\r
99 #define mainSEM_TEST_PRIORITY ( tskIDLE_PRIORITY + 1 )
\r
100 #define mainBLOCK_Q_PRIORITY ( tskIDLE_PRIORITY + 2 )
\r
101 #define mainCOM_TEST_PRIORITY ( tskIDLE_PRIORITY + 2 )
\r
102 #define mainUSB_PRIORITY ( tskIDLE_PRIORITY + 2 )
\r
104 /* Constants required by the 'Check' task. */
\r
105 #define mainNO_ERROR_FLASH_PERIOD ( ( portTickType ) 3000 / portTICK_RATE_MS )
\r
106 #define mainERROR_FLASH_PERIOD ( ( portTickType ) 500 / portTICK_RATE_MS )
\r
107 #define mainCHECK_TASK_LED ( 3 )
\r
109 /* Constants for the ComTest tasks. */
\r
110 #define mainCOM_TEST_BAUD_RATE ( ( unsigned portLONG ) 115200 )
\r
111 #define mainCOM_TEST_LED ( 4 ) /* Off the board. */
\r
114 * The task that executes at the highest priority and calls
\r
115 * prvCheckOtherTasksAreStillRunning(). See the description at the top
\r
118 static void vErrorChecks( void *pvParameters );
\r
121 * Configure the processor for use with the Atmel demo board. Setup is minimal
\r
122 * as the low level init function (called from the startup asm file) takes care
\r
125 static void prvSetupHardware( void );
\r
128 * Checks that all the demo application tasks are still executing without error
\r
129 * - as described at the top of the file.
\r
131 static portLONG prvCheckOtherTasksAreStillRunning( void );
\r
134 /*-----------------------------------------------------------*/
\r
137 * Starts all the other tasks, then starts the scheduler.
\r
141 /* Setup any hardware that has not already been configured by the low
\r
142 level init routines. */
\r
143 prvSetupHardware();
\r
145 /* Initialise the LED outputs for use by the demo application tasks. */
\r
146 vParTestInitialise();
\r
148 /* Start all the standard demo application tasks. */
\r
149 vStartIntegerMathTasks( tskIDLE_PRIORITY );
\r
150 vStartLEDFlashTasks( mainLED_TASK_PRIORITY );
\r
151 vStartPolledQueueTasks( mainQUEUE_POLL_PRIORITY );
\r
152 vStartSemaphoreTasks( mainSEM_TEST_PRIORITY );
\r
153 vStartBlockingQueueTasks( mainBLOCK_Q_PRIORITY );
\r
154 vStartDynamicPriorityTasks();
\r
155 vAltStartComTestTasks( mainCOM_TEST_PRIORITY, mainCOM_TEST_BAUD_RATE, mainCOM_TEST_LED );
\r
157 /* Also start the USB demo which is just for the SAM7. */
\r
158 xTaskCreate( vUSBDemoTask, "USB", configMINIMAL_STACK_SIZE, NULL, mainUSB_PRIORITY, NULL );
\r
160 /* Start the check task - which is defined in this file. */
\r
161 xTaskCreate( vErrorChecks, "Check", configMINIMAL_STACK_SIZE, NULL, mainCHECK_TASK_PRIORITY, NULL );
\r
163 /* Start the scheduler.
\r
165 NOTE : Tasks run in system mode and the scheduler runs in Supervisor mode.
\r
166 The processor MUST be in supervisor mode when vTaskStartScheduler is
\r
167 called. The demo applications included in the FreeRTOS.org download switch
\r
168 to supervisor mode prior to main being called. If you are not using one of
\r
169 these demo application projects then ensure Supervisor mode is used here. */
\r
171 vTaskStartScheduler();
\r
173 /* We should never get here as control is now taken by the scheduler. */
\r
176 /*-----------------------------------------------------------*/
\r
178 static void prvSetupHardware( void )
\r
180 /* When using the JTAG debugger the hardware is not always initialised to
\r
181 the correct default state. This line just ensures that this does not
\r
182 cause all interrupts to be masked at the start. */
\r
183 AT91C_BASE_AIC->AIC_EOICR = 0;
\r
185 /* Most setup is performed by the low level init function called from the
\r
186 startup asm file. */
\r
188 /* Configure the PIO Lines corresponding to LED1 to LED4 to be outputs as
\r
189 well as the UART Tx line. */
\r
190 AT91F_PIO_CfgOutput( AT91C_BASE_PIOA, LED_MASK );
\r
192 /* Enable the peripheral clock. */
\r
193 AT91F_PMC_EnablePeriphClock( AT91C_BASE_PMC, 1 << AT91C_ID_PIOA );
\r
195 /*-----------------------------------------------------------*/
\r
197 static void vErrorChecks( void *pvParameters )
\r
199 portTickType xDelayPeriod = mainNO_ERROR_FLASH_PERIOD;
\r
201 /* The parameters are not used in this task. */
\r
202 ( void ) pvParameters;
\r
204 /* Cycle for ever, delaying then checking all the other tasks are still
\r
205 operating without error. If an error is detected then the delay period
\r
206 is decreased from mainNO_ERROR_FLASH_PERIOD to mainERROR_FLASH_PERIOD so
\r
207 the on board LED flash rate will increase. */
\r
211 /* Delay until it is time to execute again. */
\r
212 vTaskDelay( xDelayPeriod );
\r
214 /* Check all the standard demo application tasks are executing without
\r
216 if( prvCheckOtherTasksAreStillRunning() != pdPASS )
\r
218 /* An error has been detected in one of the tasks - flash faster. */
\r
219 xDelayPeriod = mainERROR_FLASH_PERIOD;
\r
222 vParTestToggleLED( mainCHECK_TASK_LED );
\r
225 /*-----------------------------------------------------------*/
\r
227 static portLONG prvCheckOtherTasksAreStillRunning( void )
\r
229 portLONG lReturn = ( portLONG ) pdPASS;
\r
231 /* Check all the demo tasks (other than the flash tasks) to ensure
\r
232 that they are all still running, and that none of them have detected
\r
235 if( xAreIntegerMathsTaskStillRunning() != pdTRUE )
\r
237 lReturn = ( portLONG ) pdFAIL;
\r
240 if( xArePollingQueuesStillRunning() != pdTRUE )
\r
242 lReturn = ( portLONG ) pdFAIL;
\r
245 if( xAreSemaphoreTasksStillRunning() != pdTRUE )
\r
247 lReturn = ( portLONG ) pdFAIL;
\r
250 if( xAreBlockingQueuesStillRunning() != pdTRUE )
\r
252 lReturn = ( portLONG ) pdFAIL;
\r
255 if( xAreComTestTasksStillRunning() != pdTRUE )
\r
257 lReturn = ( portLONG ) pdFAIL;
\r
260 if( xAreDynamicPriorityTasksStillRunning() != pdTRUE )
\r
262 lReturn = ( portLONG ) pdFAIL;
\r
267 /*-----------------------------------------------------------*/
\r