2 FreeRTOS.org V5.0.4 - Copyright (C) 2003-2008 Richard Barry.
\r
4 This file is part of the FreeRTOS.org distribution.
\r
6 FreeRTOS.org is free software; you can redistribute it and/or modify
\r
7 it under the terms of the GNU General Public License as published by
\r
8 the Free Software Foundation; either version 2 of the License, or
\r
9 (at your option) any later version.
\r
11 FreeRTOS.org is distributed in the hope that it will be useful,
\r
12 but WITHOUT ANY WARRANTY; without even the implied warranty of
\r
13 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
\r
14 GNU General Public License for more details.
\r
16 You should have received a copy of the GNU General Public License
\r
17 along with FreeRTOS.org; if not, write to the Free Software
\r
18 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
\r
20 A special exception to the GPL can be applied should you wish to distribute
\r
21 a combined work that includes FreeRTOS.org, without being obliged to provide
\r
22 the source code for any proprietary components. See the licensing section
\r
23 of http://www.FreeRTOS.org for full details of how and when the exception
\r
26 ***************************************************************************
\r
27 ***************************************************************************
\r
29 * SAVE TIME AND MONEY! We can port FreeRTOS.org to your own hardware, *
\r
30 * and even write all or part of your application on your behalf. *
\r
31 * See http://www.OpenRTOS.com for details of the services we provide to *
\r
32 * expedite your project. *
\r
34 ***************************************************************************
\r
35 ***************************************************************************
\r
37 Please ensure to read the configuration and relevant port sections of the
\r
38 online documentation.
\r
40 http://www.FreeRTOS.org - Documentation, latest information, license and
\r
43 http://www.SafeRTOS.com - A version that is certified for use in safety
\r
46 http://www.OpenRTOS.com - Commercial support, development, porting,
\r
47 licensing and training services.
\r
51 BASIC INTERRUPT DRIVEN SERIAL PORT DRIVER FOR UART0.
\r
54 /* Standard includes. */
\r
57 /* Scheduler includes. */
\r
58 #include "FreeRTOS.h"
\r
61 /* Demo application includes. */
\r
64 /*-----------------------------------------------------------*/
\r
66 /* Location of the COM0 registers. */
\r
67 #define serCOM0 ( ( AT91PS_USART ) AT91C_BASE_US0 )
\r
69 /* Interrupt control macros. */
\r
70 #define serINTERRUPT_LEVEL ( 5 )
\r
71 #define vInterruptOn() AT91F_US_EnableIt( serCOM0, AT91C_US_TXRDY | AT91C_US_RXRDY )
\r
72 #define vInterruptOff() AT91F_US_DisableIt( serCOM0, AT91C_US_TXRDY )
\r
74 /* Misc constants. */
\r
75 #define serINVALID_QUEUE ( ( xQueueHandle ) 0 )
\r
76 #define serHANDLE ( ( xComPortHandle ) 1 )
\r
77 #define serNO_BLOCK ( ( portTickType ) 0 )
\r
78 #define serNO_TIMEGUARD ( ( unsigned portLONG ) 0 )
\r
79 #define serNO_PERIPHERAL_B_SETUP ( ( unsigned portLONG ) 0 )
\r
82 /* Queues used to hold received characters, and characters waiting to be
\r
84 static xQueueHandle xRxedChars;
\r
85 static xQueueHandle xCharsForTx;
\r
87 /*-----------------------------------------------------------*/
\r
89 /* Interrupt entry point written in the assembler file serialISR.s79. */
\r
90 extern void vSerialISREntry( void );
\r
92 /* The interrupt service routine - called from the assembly entry point. */
\r
93 __arm void vSerialISR( void );
\r
95 /*-----------------------------------------------------------*/
\r
98 * See the serial2.h header file.
\r
100 xComPortHandle xSerialPortInitMinimal( unsigned portLONG ulWantedBaud, unsigned portBASE_TYPE uxQueueLength )
\r
102 xComPortHandle xReturn = serHANDLE;
\r
103 extern void ( vUART_ISR )( void );
\r
105 /* Create the queues used to hold Rx and Tx characters. */
\r
106 xRxedChars = xQueueCreate( uxQueueLength, ( unsigned portBASE_TYPE ) sizeof( signed portCHAR ) );
\r
107 xCharsForTx = xQueueCreate( uxQueueLength + 1, ( unsigned portBASE_TYPE ) sizeof( signed portCHAR ) );
\r
109 /* If the queues were created correctly then setup the serial port
\r
111 if( ( xRxedChars != serINVALID_QUEUE ) && ( xCharsForTx != serINVALID_QUEUE ) )
\r
113 portENTER_CRITICAL();
\r
115 /* Enable the USART clock. */
\r
116 AT91F_PMC_EnablePeriphClock( AT91C_BASE_PMC, 1 << AT91C_ID_US0 );
\r
118 AT91F_PIO_CfgPeriph( AT91C_BASE_PIOA, ( ( unsigned portLONG ) AT91C_PA5_RXD0 ) | ( ( unsigned portLONG ) AT91C_PA6_TXD0 ), serNO_PERIPHERAL_B_SETUP );
\r
120 /* Set the required protocol. */
\r
121 AT91F_US_Configure( serCOM0, configCPU_CLOCK_HZ, AT91C_US_ASYNC_MODE, ulWantedBaud, serNO_TIMEGUARD );
\r
123 /* Enable Rx and Tx. */
\r
124 serCOM0->US_CR = AT91C_US_RXEN | AT91C_US_TXEN;
\r
126 /* Enable the Rx interrupts. The Tx interrupts are not enabled
\r
127 until there are characters to be transmitted. */
\r
128 AT91F_US_EnableIt( serCOM0, AT91C_US_RXRDY );
\r
130 /* Enable the interrupts in the AIC. */
\r
131 AT91F_AIC_ConfigureIt( AT91C_BASE_AIC, AT91C_ID_US0, serINTERRUPT_LEVEL, AT91C_AIC_SRCTYPE_INT_LEVEL_SENSITIVE, ( void (*)( void ) ) vSerialISREntry );
\r
132 AT91F_AIC_EnableIt( AT91C_BASE_AIC, AT91C_ID_US0 );
\r
134 portEXIT_CRITICAL();
\r
138 xReturn = ( xComPortHandle ) 0;
\r
141 /* This demo file only supports a single port but we have to return
\r
142 something to comply with the standard demo header file. */
\r
145 /*-----------------------------------------------------------*/
\r
147 signed portBASE_TYPE xSerialGetChar( xComPortHandle pxPort, signed portCHAR *pcRxedChar, portTickType xBlockTime )
\r
149 /* The port handle is not required as this driver only supports one port. */
\r
152 /* Get the next character from the buffer. Return false if no characters
\r
153 are available, or arrive before xBlockTime expires. */
\r
154 if( xQueueReceive( xRxedChars, pcRxedChar, xBlockTime ) )
\r
163 /*-----------------------------------------------------------*/
\r
165 void vSerialPutString( xComPortHandle pxPort, const signed portCHAR * const pcString, unsigned portSHORT usStringLength )
\r
167 signed portCHAR *pxNext;
\r
169 /* A couple of parameters that this port does not use. */
\r
170 ( void ) usStringLength;
\r
173 /* NOTE: This implementation does not handle the queue being full as no
\r
174 block time is used! */
\r
176 /* The port handle is not required as this driver only supports UART0. */
\r
179 /* Send each character in the string, one at a time. */
\r
180 pxNext = ( signed portCHAR * ) pcString;
\r
183 xSerialPutChar( pxPort, *pxNext, serNO_BLOCK );
\r
187 /*-----------------------------------------------------------*/
\r
189 signed portBASE_TYPE xSerialPutChar( xComPortHandle pxPort, signed portCHAR cOutChar, portTickType xBlockTime )
\r
191 /* Place the character in the queue of characters to be transmitted. */
\r
192 if( xQueueSend( xCharsForTx, &cOutChar, xBlockTime ) != pdPASS )
\r
197 /* Turn on the Tx interrupt so the ISR will remove the character from the
\r
198 queue and send it. This does not need to be in a critical section as
\r
199 if the interrupt has already removed the character the next interrupt
\r
200 will simply turn off the Tx interrupt again. */
\r
205 /*-----------------------------------------------------------*/
\r
207 void vSerialClose( xComPortHandle xPort )
\r
209 /* Not supported as not required by the demo application. */
\r
211 /*-----------------------------------------------------------*/
\r
213 /* Serial port ISR. This can cause a context switch so is not defined as a
\r
214 standard ISR using the __irq keyword. Instead a wrapper function is defined
\r
215 within serialISR.s79 which in turn calls this function. See the port
\r
216 documentation on the FreeRTOS.org website for more information. */
\r
217 __arm void vSerialISR( void )
\r
219 unsigned portLONG ulStatus;
\r
220 signed portCHAR cChar;
\r
221 portBASE_TYPE xHigherPriorityTaskWoken = pdFALSE;
\r
223 /* What caused the interrupt? */
\r
224 ulStatus = serCOM0->US_CSR &= serCOM0->US_IMR;
\r
226 if( ulStatus & AT91C_US_TXRDY )
\r
228 /* The interrupt was caused by the THR becoming empty. Are there any
\r
229 more characters to transmit? */
\r
230 if( xQueueReceiveFromISR( xCharsForTx, &cChar, &xHigherPriorityTaskWoken ) == pdTRUE )
\r
232 /* A character was retrieved from the queue so can be sent to the
\r
234 serCOM0->US_THR = cChar;
\r
238 /* Queue empty, nothing to send so turn off the Tx interrupt. */
\r
243 if( ulStatus & AT91C_US_RXRDY )
\r
245 /* The interrupt was caused by a character being received. Grab the
\r
246 character from the RHR and place it in the queue or received
\r
248 cChar = serCOM0->US_RHR;
\r
249 xQueueSendFromISR( xRxedChars, &cChar, &xHigherPriorityTaskWoken );
\r
252 /* If a task was woken by either a character being received or a character
\r
253 being transmitted then we may need to switch to another task. */
\r
254 portEND_SWITCHING_ISR( xHigherPriorityTaskWoken );
\r
256 /* End the interrupt in the AIC. */
\r
257 AT91C_BASE_AIC->AIC_EOICR = 0;
\r