2 FreeRTOS.org V4.7.1 - Copyright (C) 2003-2008 Richard Barry.
\r
4 This file is part of the FreeRTOS.org distribution.
\r
6 FreeRTOS.org is free software; you can redistribute it and/or modify
\r
7 it under the terms of the GNU General Public License as published by
\r
8 the Free Software Foundation; either version 2 of the License, or
\r
9 (at your option) any later version.
\r
11 FreeRTOS.org is distributed in the hope that it will be useful,
\r
12 but WITHOUT ANY WARRANTY; without even the implied warranty of
\r
13 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
\r
14 GNU General Public License for more details.
\r
16 You should have received a copy of the GNU General Public License
\r
17 along with FreeRTOS.org; if not, write to the Free Software
\r
18 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
\r
20 A special exception to the GPL can be applied should you wish to distribute
\r
21 a combined work that includes FreeRTOS.org, without being obliged to provide
\r
22 the source code for any proprietary components. See the licensing section
\r
23 of http://www.FreeRTOS.org for full details of how and when the exception
\r
26 ***************************************************************************
\r
28 Please ensure to read the configuration and relevant port sections of the
\r
29 online documentation.
\r
31 +++ http://www.FreeRTOS.org +++
\r
32 Documentation, latest information, license and contact details.
\r
34 +++ http://www.SafeRTOS.com +++
\r
35 A version that is certified for use in safety critical systems.
\r
37 +++ http://www.OpenRTOS.com +++
\r
38 Commercial support, development, porting, licensing and training services.
\r
40 ***************************************************************************
\r
44 NOTE : Tasks run in system mode and the scheduler runs in Supervisor mode.
\r
45 The processor MUST be in supervisor mode when vTaskStartScheduler is
\r
46 called. The demo applications included in the FreeRTOS.org download switch
\r
47 to supervisor mode prior to main being called. If you are not using one of
\r
48 these demo application projects then ensure Supervisor mode is used.
\r
53 * Creates all the demo application tasks, then starts the scheduler. The WEB
\r
54 * documentation provides more details of the demo application tasks.
\r
56 * Main.c also creates a task called "Check". This only executes every three
\r
57 * seconds but has the highest priority so is guaranteed to get processor time.
\r
58 * Its main function is to check that all the other tasks are still operational.
\r
59 * Each task (other than the "flash" tasks) maintains a unique count that is
\r
60 * incremented each time the task successfully completes its function. Should
\r
61 * any error occur within such a task the count is permanently halted. The
\r
62 * check task inspects the count of each task to ensure it has changed since
\r
63 * the last time the check task executed. If all the count variables have
\r
64 * changed all the tasks are still executing error free, and the check task
\r
65 * toggles the onboard LED. Should any task contain an error at any time
\r
66 * the LED toggle rate will change from 3 seconds to 500ms.
\r
68 * To check the operation of the memory allocator the check task also
\r
69 * dynamically creates a task before delaying, and deletes it again when it
\r
70 * wakes. If memory cannot be allocated for the new task the call to xTaskCreate
\r
71 * will fail and an error is signalled. The dynamically created task itself
\r
72 * allocates and frees memory just to give the allocator a bit more exercise.
\r
79 + The vErrorChecks() task now dynamically creates then deletes a task each
\r
80 cycle. This tests the operation of the memory allocator.
\r
84 + vParTestInitialise() is called during initialisation to ensure all the
\r
89 /* Standard includes. */
\r
93 /* Scheduler includes. */
\r
94 #include "FreeRTOS.h"
\r
97 /* Demo application includes. */
\r
98 #include "partest.h"
\r
100 #include "integer.h"
\r
102 #include "comtest2.h"
\r
103 #include "semtest.h"
\r
105 #include "dynamic.h"
\r
106 #include "BlockQ.h"
\r
107 #include "serial.h"
\r
109 /*-----------------------------------------------------------*/
\r
111 /* Constants to setup I/O. */
\r
112 #define mainTX_ENABLE ( ( unsigned portLONG ) 0x0001 )
\r
113 #define mainRX_ENABLE ( ( unsigned portLONG ) 0x0004 )
\r
114 #define mainP0_14 ( ( unsigned portLONG ) 0x4000 )
\r
115 #define mainJTAG_PORT ( ( unsigned portLONG ) 0x3E0000UL )
\r
117 /* Constants to setup the PLL. */
\r
118 #define mainPLL_MUL_4 ( ( unsigned portCHAR ) 0x0003 )
\r
119 #define mainPLL_DIV_1 ( ( unsigned portCHAR ) 0x0000 )
\r
120 #define mainPLL_ENABLE ( ( unsigned portCHAR ) 0x0001 )
\r
121 #define mainPLL_CONNECT ( ( unsigned portCHAR ) 0x0003 )
\r
122 #define mainPLL_FEED_BYTE1 ( ( unsigned portCHAR ) 0xaa )
\r
123 #define mainPLL_FEED_BYTE2 ( ( unsigned portCHAR ) 0x55 )
\r
124 #define mainPLL_LOCK ( ( unsigned portLONG ) 0x0400 )
\r
126 /* Constants to setup the MAM. */
\r
127 #define mainMAM_TIM_3 ( ( unsigned portCHAR ) 0x03 )
\r
128 #define mainMAM_MODE_FULL ( ( unsigned portCHAR ) 0x02 )
\r
130 /* Constants to setup the peripheral bus. */
\r
131 #define mainBUS_CLK_FULL ( ( unsigned portCHAR ) 0x01 )
\r
133 /* Constants for the ComTest tasks. */
\r
134 #define mainCOM_TEST_BAUD_RATE ( ( unsigned portLONG ) 115200 )
\r
135 #define mainCOM_TEST_LED ( 3 )
\r
137 /* Priorities for the demo application tasks. */
\r
138 #define mainLED_TASK_PRIORITY ( tskIDLE_PRIORITY + 3 )
\r
139 #define mainCOM_TEST_PRIORITY ( tskIDLE_PRIORITY + 2 )
\r
140 #define mainQUEUE_POLL_PRIORITY ( tskIDLE_PRIORITY + 0 )
\r
141 #define mainCHECK_TASK_PRIORITY ( tskIDLE_PRIORITY + 4 )
\r
142 #define mainSEM_TEST_PRIORITY ( tskIDLE_PRIORITY + 0 )
\r
143 #define mainBLOCK_Q_PRIORITY ( tskIDLE_PRIORITY + 2 )
\r
145 /* The rate at which the on board LED will toggle when there is/is not an
\r
147 #define mainNO_ERROR_FLASH_PERIOD ( ( portTickType ) 3000 / portTICK_RATE_MS )
\r
148 #define mainERROR_FLASH_PERIOD ( ( portTickType ) 500 / portTICK_RATE_MS )
\r
149 #define mainON_BOARD_LED_BIT ( ( unsigned portLONG ) 0x80 )
\r
151 /* Constants used by the vMemCheckTask() task. */
\r
152 #define mainCOUNT_INITIAL_VALUE ( ( unsigned portLONG ) 0 )
\r
153 #define mainNO_TASK ( 0 )
\r
155 /* The size of the memory blocks allocated by the vMemCheckTask() task. */
\r
156 #define mainMEM_CHECK_SIZE_1 ( ( size_t ) 51 )
\r
157 #define mainMEM_CHECK_SIZE_2 ( ( size_t ) 52 )
\r
158 #define mainMEM_CHECK_SIZE_3 ( ( size_t ) 151 )
\r
160 /*-----------------------------------------------------------*/
\r
163 * The Olimex demo board has a single built in LED. This function simply
\r
164 * toggles its state.
\r
166 void prvToggleOnBoardLED( void );
\r
169 * Checks that all the demo application tasks are still executing without error
\r
170 * - as described at the top of the file.
\r
172 static portLONG prvCheckOtherTasksAreStillRunning( unsigned portLONG ulMemCheckTaskCount );
\r
175 * The task that executes at the highest priority and calls
\r
176 * prvCheckOtherTasksAreStillRunning(). See the description at the top
\r
179 static void vErrorChecks( void *pvParameters );
\r
182 * Dynamically created and deleted during each cycle of the vErrorChecks()
\r
183 * task. This is done to check the operation of the memory allocator.
\r
184 * See the top of vErrorChecks for more details.
\r
186 static void vMemCheckTask( void *pvParameters );
\r
189 * Configure the processor for use with the Olimex demo board. This includes
\r
190 * setup for the I/O, system clock, and access timings.
\r
192 static void prvSetupHardware( void );
\r
194 /*-----------------------------------------------------------*/
\r
197 * Starts all the other tasks, then starts the scheduler.
\r
201 /* Setup the hardware for use with the Olimex demo board. */
\r
202 prvSetupHardware();
\r
204 /* Start the demo/test application tasks. */
\r
205 vStartIntegerMathTasks( tskIDLE_PRIORITY );
\r
206 vAltStartComTestTasks( mainCOM_TEST_PRIORITY, mainCOM_TEST_BAUD_RATE, mainCOM_TEST_LED );
\r
207 vStartLEDFlashTasks( mainLED_TASK_PRIORITY );
\r
208 vStartPolledQueueTasks( mainQUEUE_POLL_PRIORITY );
\r
209 vStartMathTasks( tskIDLE_PRIORITY );
\r
210 vStartSemaphoreTasks( mainSEM_TEST_PRIORITY );
\r
211 vStartDynamicPriorityTasks();
\r
212 vStartBlockingQueueTasks( mainBLOCK_Q_PRIORITY );
\r
214 /* Start the check task - which is defined in this file. */
\r
215 xTaskCreate( vErrorChecks, ( signed portCHAR * ) "Check", configMINIMAL_STACK_SIZE, NULL, mainCHECK_TASK_PRIORITY, NULL );
\r
217 /* Now all the tasks have been started - start the scheduler.
\r
219 NOTE : Tasks run in system mode and the scheduler runs in Supervisor mode.
\r
220 The processor MUST be in supervisor mode when vTaskStartScheduler is
\r
221 called. The demo applications included in the FreeRTOS.org download switch
\r
222 to supervisor mode prior to main being called. If you are not using one of
\r
223 these demo application projects then ensure Supervisor mode is used here. */
\r
224 vTaskStartScheduler();
\r
226 /* Should never reach here! */
\r
229 /*-----------------------------------------------------------*/
\r
231 static void vErrorChecks( void *pvParameters )
\r
233 portTickType xDelayPeriod = mainNO_ERROR_FLASH_PERIOD;
\r
234 unsigned portLONG ulMemCheckTaskRunningCount;
\r
235 xTaskHandle xCreatedTask;
\r
237 /* The parameters are not used in this function. */
\r
238 ( void ) pvParameters;
\r
240 /* Cycle for ever, delaying then checking all the other tasks are still
\r
241 operating without error. If an error is detected then the delay period
\r
242 is decreased from mainNO_ERROR_FLASH_PERIOD to mainERROR_FLASH_PERIOD so
\r
243 the on board LED flash rate will increase.
\r
245 In addition to the standard tests the memory allocator is tested through
\r
246 the dynamic creation and deletion of a task each cycle. Each time the
\r
247 task is created memory must be allocated for its stack. When the task is
\r
248 deleted this memory is returned to the heap. If the task cannot be created
\r
249 then it is likely that the memory allocation failed. */
\r
253 /* Dynamically create a task - passing ulMemCheckTaskRunningCount as a
\r
255 ulMemCheckTaskRunningCount = mainCOUNT_INITIAL_VALUE;
\r
256 xCreatedTask = mainNO_TASK;
\r
258 if( xTaskCreate( vMemCheckTask, ( signed portCHAR * ) "MEM_CHECK", configMINIMAL_STACK_SIZE, ( void * ) &ulMemCheckTaskRunningCount, tskIDLE_PRIORITY, &xCreatedTask ) != pdPASS )
\r
260 /* Could not create the task - we have probably run out of heap. */
\r
261 xDelayPeriod = mainERROR_FLASH_PERIOD;
\r
264 /* Delay until it is time to execute again. */
\r
265 vTaskDelay( xDelayPeriod );
\r
267 /* Delete the dynamically created task. */
\r
268 if( xCreatedTask != mainNO_TASK )
\r
270 vTaskDelete( xCreatedTask );
\r
273 /* Check all the standard demo application tasks are executing without
\r
274 error. ulMemCheckTaskRunningCount is checked to ensure it was
\r
275 modified by the task just deleted. */
\r
276 if( prvCheckOtherTasksAreStillRunning( ulMemCheckTaskRunningCount ) != pdPASS )
\r
278 /* An error has been detected in one of the tasks - flash faster. */
\r
279 xDelayPeriod = mainERROR_FLASH_PERIOD;
\r
282 prvToggleOnBoardLED();
\r
285 /*-----------------------------------------------------------*/
\r
287 static void prvSetupHardware( void )
\r
289 #ifdef RUN_FROM_RAM
\r
290 /* Remap the interrupt vectors to RAM if we are are running from RAM. */
\r
294 /* Configure the RS2332 pins. All other pins remain at their default of 0. */
\r
295 PCB_PINSEL0 |= mainTX_ENABLE;
\r
296 PCB_PINSEL0 |= mainRX_ENABLE;
\r
298 /* Set all GPIO to output other than the P0.14 (BSL), and the JTAG pins.
\r
299 The JTAG pins are left as input as I'm not sure what will happen if the
\r
300 Wiggler is connected after powerup - not that it would be a good idea to
\r
302 GPIO_IODIR = ~( mainP0_14 + mainJTAG_PORT );
\r
304 /* Setup the PLL to multiply the XTAL input by 4. */
\r
305 SCB_PLLCFG = ( mainPLL_MUL_4 | mainPLL_DIV_1 );
\r
307 /* Activate the PLL by turning it on then feeding the correct sequence of
\r
309 SCB_PLLCON = mainPLL_ENABLE;
\r
310 SCB_PLLFEED = mainPLL_FEED_BYTE1;
\r
311 SCB_PLLFEED = mainPLL_FEED_BYTE2;
\r
313 /* Wait for the PLL to lock... */
\r
314 while( !( SCB_PLLSTAT & mainPLL_LOCK ) );
\r
316 /* ...before connecting it using the feed sequence again. */
\r
317 SCB_PLLCON = mainPLL_CONNECT;
\r
318 SCB_PLLFEED = mainPLL_FEED_BYTE1;
\r
319 SCB_PLLFEED = mainPLL_FEED_BYTE2;
\r
321 /* Setup and turn on the MAM. Three cycle access is used due to the fast
\r
322 PLL used. It is possible faster overall performance could be obtained by
\r
323 tuning the MAM and PLL settings. */
\r
324 MAM_TIM = mainMAM_TIM_3;
\r
325 MAM_CR = mainMAM_MODE_FULL;
\r
327 /* Setup the peripheral bus to be the same as the PLL output. */
\r
328 SCB_VPBDIV = mainBUS_CLK_FULL;
\r
330 /* Initialise LED outputs. */
\r
331 vParTestInitialise();
\r
333 /*-----------------------------------------------------------*/
\r
335 void prvToggleOnBoardLED( void )
\r
337 unsigned portLONG ulState;
\r
339 ulState = GPIO0_IOPIN;
\r
340 if( ulState & mainON_BOARD_LED_BIT )
\r
342 GPIO_IOCLR = mainON_BOARD_LED_BIT;
\r
346 GPIO_IOSET = mainON_BOARD_LED_BIT;
\r
349 /*-----------------------------------------------------------*/
\r
351 static portLONG prvCheckOtherTasksAreStillRunning( unsigned portLONG ulMemCheckTaskCount )
\r
353 portLONG lReturn = ( portLONG ) pdPASS;
\r
355 /* Check all the demo tasks (other than the flash tasks) to ensure
\r
356 that they are all still running, and that none of them have detected
\r
359 if( xAreIntegerMathsTaskStillRunning() != pdTRUE )
\r
361 lReturn = ( portLONG ) pdFAIL;
\r
364 if( xAreComTestTasksStillRunning() != pdTRUE )
\r
366 lReturn = ( portLONG ) pdFAIL;
\r
369 if( xArePollingQueuesStillRunning() != pdTRUE )
\r
371 lReturn = ( portLONG ) pdFAIL;
\r
374 if( xAreMathsTaskStillRunning() != pdTRUE )
\r
376 lReturn = ( portLONG ) pdFAIL;
\r
379 if( xAreSemaphoreTasksStillRunning() != pdTRUE )
\r
381 lReturn = ( portLONG ) pdFAIL;
\r
384 if( xAreDynamicPriorityTasksStillRunning() != pdTRUE )
\r
386 lReturn = ( portLONG ) pdFAIL;
\r
389 if( xAreBlockingQueuesStillRunning() != pdTRUE )
\r
391 lReturn = ( portLONG ) pdFAIL;
\r
394 if( ulMemCheckTaskCount == mainCOUNT_INITIAL_VALUE )
\r
396 /* The vMemCheckTask did not increment the counter - it must
\r
398 lReturn = ( portLONG ) pdFAIL;
\r
403 /*-----------------------------------------------------------*/
\r
405 static void vMemCheckTask( void *pvParameters )
\r
407 unsigned portLONG *pulMemCheckTaskRunningCounter;
\r
408 void *pvMem1, *pvMem2, *pvMem3;
\r
409 static portLONG lErrorOccurred = pdFALSE;
\r
411 /* This task is dynamically created then deleted during each cycle of the
\r
412 vErrorChecks task to check the operation of the memory allocator. Each time
\r
413 the task is created memory is allocated for the stack and TCB. Each time
\r
414 the task is deleted this memory is returned to the heap. This task itself
\r
415 exercises the allocator by allocating and freeing blocks.
\r
417 The task executes at the idle priority so does not require a delay.
\r
419 pulMemCheckTaskRunningCounter is incremented each cycle to indicate to the
\r
420 vErrorChecks() task that this task is still executing without error. */
\r
422 pulMemCheckTaskRunningCounter = ( unsigned portLONG * ) pvParameters;
\r
426 if( lErrorOccurred == pdFALSE )
\r
428 /* We have never seen an error so increment the counter. */
\r
429 ( *pulMemCheckTaskRunningCounter )++;
\r
432 /* Allocate some memory - just to give the allocator some extra
\r
433 exercise. This has to be in a critical section to ensure the
\r
434 task does not get deleted while it has memory allocated. */
\r
437 pvMem1 = pvPortMalloc( mainMEM_CHECK_SIZE_1 );
\r
438 if( pvMem1 == NULL )
\r
440 lErrorOccurred = pdTRUE;
\r
444 memset( pvMem1, 0xaa, mainMEM_CHECK_SIZE_1 );
\r
445 vPortFree( pvMem1 );
\r
450 /* Again - with a different size block. */
\r
453 pvMem2 = pvPortMalloc( mainMEM_CHECK_SIZE_2 );
\r
454 if( pvMem2 == NULL )
\r
456 lErrorOccurred = pdTRUE;
\r
460 memset( pvMem2, 0xaa, mainMEM_CHECK_SIZE_2 );
\r
461 vPortFree( pvMem2 );
\r
466 /* Again - with a different size block. */
\r
469 pvMem3 = pvPortMalloc( mainMEM_CHECK_SIZE_3 );
\r
470 if( pvMem3 == NULL )
\r
472 lErrorOccurred = pdTRUE;
\r
476 memset( pvMem3, 0xaa, mainMEM_CHECK_SIZE_3 );
\r
477 vPortFree( pvMem3 );
\r