2 FreeRTOS.org V4.8.0 - Copyright (C) 2003-2008 Richard Barry.
\r
4 This file is part of the FreeRTOS.org distribution.
\r
6 FreeRTOS.org is free software; you can redistribute it and/or modify
\r
7 it under the terms of the GNU General Public License as published by
\r
8 the Free Software Foundation; either version 2 of the License, or
\r
9 (at your option) any later version.
\r
11 FreeRTOS.org is distributed in the hope that it will be useful,
\r
12 but WITHOUT ANY WARRANTY; without even the implied warranty of
\r
13 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
\r
14 GNU General Public License for more details.
\r
16 You should have received a copy of the GNU General Public License
\r
17 along with FreeRTOS.org; if not, write to the Free Software
\r
18 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
\r
20 A special exception to the GPL can be applied should you wish to distribute
\r
21 a combined work that includes FreeRTOS.org, without being obliged to provide
\r
22 the source code for any proprietary components. See the licensing section
\r
23 of http://www.FreeRTOS.org for full details of how and when the exception
\r
26 ***************************************************************************
\r
27 ***************************************************************************
\r
29 * SAVE TIME AND MONEY! Why not get us to quote to get FreeRTOS.org *
\r
30 * running on your hardware - or even write all or part of your application*
\r
31 * for you? See http://www.OpenRTOS.com for details. *
\r
33 ***************************************************************************
\r
34 ***************************************************************************
\r
36 Please ensure to read the configuration and relevant port sections of the
\r
37 online documentation.
\r
39 http://www.FreeRTOS.org - Documentation, latest information, license and
\r
42 http://www.SafeRTOS.com - A version that is certified for use in safety
\r
45 http://www.OpenRTOS.com - Commercial support, development, porting,
\r
46 licensing and training services.
\r
52 + Made serial ISR handling more complete and robust.
\r
56 + Split serial.c into serial.c and serialISR.c. serial.c can be
\r
57 compiled using ARM or THUMB modes. serialISR.c must always be
\r
58 compiled in ARM mode.
\r
59 + Another small change to cSerialPutChar().
\r
63 + In cSerialPutChar() an extra check is made to ensure the post to
\r
64 the queue was successful if then attempting to retrieve the posted
\r
70 BASIC INTERRUPT DRIVEN SERIAL PORT DRIVER FOR UART0.
\r
72 This file contains all the serial port components that can be compiled to
\r
73 either ARM or THUMB mode. Components that must be compiled to ARM mode are
\r
74 contained in serialISR.c.
\r
77 /* Standard includes. */
\r
80 /* Scheduler includes. */
\r
81 #include "FreeRTOS.h"
\r
85 /* Demo application includes. */
\r
88 /*-----------------------------------------------------------*/
\r
90 /* Constants to setup and access the UART. */
\r
91 #define serDLAB ( ( unsigned portCHAR ) 0x80 )
\r
92 #define serENABLE_INTERRUPTS ( ( unsigned portCHAR ) 0x03 )
\r
93 #define serNO_PARITY ( ( unsigned portCHAR ) 0x00 )
\r
94 #define ser1_STOP_BIT ( ( unsigned portCHAR ) 0x00 )
\r
95 #define ser8_BIT_CHARS ( ( unsigned portCHAR ) 0x03 )
\r
96 #define serFIFO_ON ( ( unsigned portCHAR ) 0x01 )
\r
97 #define serCLEAR_FIFO ( ( unsigned portCHAR ) 0x06 )
\r
98 #define serWANTED_CLOCK_SCALING ( ( unsigned portLONG ) 16 )
\r
100 /* Constants to setup and access the VIC. */
\r
101 #define serUART0_VIC_CHANNEL ( ( unsigned portLONG ) 0x0006 )
\r
102 #define serUART0_VIC_CHANNEL_BIT ( ( unsigned portLONG ) 0x0040 )
\r
103 #define serUART0_VIC_ENABLE ( ( unsigned portLONG ) 0x0020 )
\r
104 #define serCLEAR_VIC_INTERRUPT ( ( unsigned portLONG ) 0 )
\r
106 #define serINVALID_QUEUE ( ( xQueueHandle ) 0 )
\r
107 #define serHANDLE ( ( xComPortHandle ) 1 )
\r
108 #define serNO_BLOCK ( ( portTickType ) 0 )
\r
110 /*-----------------------------------------------------------*/
\r
112 /* Queues used to hold received characters, and characters waiting to be
\r
114 static xQueueHandle xRxedChars;
\r
115 static xQueueHandle xCharsForTx;
\r
117 /*-----------------------------------------------------------*/
\r
119 /* Communication flag between the interrupt service routine and serial API. */
\r
120 static volatile portLONG *plTHREEmpty;
\r
123 * The queues are created in serialISR.c as they are used from the ISR.
\r
124 * Obtain references to the queues and THRE Empty flag.
\r
126 extern void vSerialISRCreateQueues( unsigned portBASE_TYPE uxQueueLength, xQueueHandle *pxRxedChars, xQueueHandle *pxCharsForTx, portLONG volatile **pplTHREEmptyFlag );
\r
128 /*-----------------------------------------------------------*/
\r
130 xComPortHandle xSerialPortInitMinimal( unsigned portLONG ulWantedBaud, unsigned portBASE_TYPE uxQueueLength )
\r
132 unsigned portLONG ulDivisor, ulWantedClock;
\r
133 xComPortHandle xReturn = serHANDLE;
\r
134 extern void ( vUART_ISR_Wrapper )( void );
\r
136 /* The queues are used in the serial ISR routine, so are created from
\r
137 serialISR.c (which is always compiled to ARM mode. */
\r
138 vSerialISRCreateQueues( uxQueueLength, &xRxedChars, &xCharsForTx, &plTHREEmpty );
\r
141 ( xRxedChars != serINVALID_QUEUE ) &&
\r
142 ( xCharsForTx != serINVALID_QUEUE ) &&
\r
143 ( ulWantedBaud != ( unsigned portLONG ) 0 )
\r
146 portENTER_CRITICAL();
\r
148 /* Setup the baud rate: Calculate the divisor value. */
\r
149 ulWantedClock = ulWantedBaud * serWANTED_CLOCK_SCALING;
\r
150 ulDivisor = configCPU_CLOCK_HZ / ulWantedClock;
\r
152 /* Set the DLAB bit so we can access the divisor. */
\r
153 UART0_LCR |= serDLAB;
\r
155 /* Setup the divisor. */
\r
156 UART0_DLL = ( unsigned portCHAR ) ( ulDivisor & ( unsigned portLONG ) 0xff );
\r
158 UART0_DLM = ( unsigned portCHAR ) ( ulDivisor & ( unsigned portLONG ) 0xff );
\r
160 /* Turn on the FIFO's and clear the buffers. */
\r
161 UART0_FCR = ( serFIFO_ON | serCLEAR_FIFO );
\r
163 /* Setup transmission format. */
\r
164 UART0_LCR = serNO_PARITY | ser1_STOP_BIT | ser8_BIT_CHARS;
\r
166 /* Setup the VIC for the UART. */
\r
167 VICIntSelect &= ~( serUART0_VIC_CHANNEL_BIT );
\r
168 VICIntEnable |= serUART0_VIC_CHANNEL_BIT;
\r
169 VICVectAddr1 = ( portLONG ) vUART_ISR_Wrapper;
\r
170 VICVectCntl1 = serUART0_VIC_CHANNEL | serUART0_VIC_ENABLE;
\r
172 /* Enable UART0 interrupts. */
\r
173 UART0_IER |= serENABLE_INTERRUPTS;
\r
175 portEXIT_CRITICAL();
\r
179 xReturn = ( xComPortHandle ) 0;
\r
184 /*-----------------------------------------------------------*/
\r
186 signed portBASE_TYPE xSerialGetChar( xComPortHandle pxPort, signed portCHAR *pcRxedChar, portTickType xBlockTime )
\r
188 /* The port handle is not required as this driver only supports UART0. */
\r
191 /* Get the next character from the buffer. Return false if no characters
\r
192 are available, or arrive before xBlockTime expires. */
\r
193 if( xQueueReceive( xRxedChars, pcRxedChar, xBlockTime ) )
\r
202 /*-----------------------------------------------------------*/
\r
204 void vSerialPutString( xComPortHandle pxPort, const signed portCHAR * const pcString, unsigned portSHORT usStringLength )
\r
206 signed portCHAR *pxNext;
\r
208 /* NOTE: This implementation does not handle the queue being full as no
\r
209 block time is used! */
\r
211 /* The port handle is not required as this driver only supports UART0. */
\r
213 ( void ) usStringLength;
\r
215 /* Send each character in the string, one at a time. */
\r
216 pxNext = ( signed portCHAR * ) pcString;
\r
219 xSerialPutChar( pxPort, *pxNext, serNO_BLOCK );
\r
223 /*-----------------------------------------------------------*/
\r
225 signed portBASE_TYPE xSerialPutChar( xComPortHandle pxPort, signed portCHAR cOutChar, portTickType xBlockTime )
\r
227 signed portBASE_TYPE xReturn;
\r
229 /* This demo driver only supports one port so the parameter is not used. */
\r
232 portENTER_CRITICAL();
\r
234 /* Is there space to write directly to the UART? */
\r
235 if( *plTHREEmpty == ( portLONG ) pdTRUE )
\r
237 /* We wrote the character directly to the UART, so was
\r
239 *plTHREEmpty = pdFALSE;
\r
240 UART0_THR = cOutChar;
\r
245 /* We cannot write directly to the UART, so queue the character.
\r
246 Block for a maximum of xBlockTime if there is no space in the
\r
248 xReturn = xQueueSend( xCharsForTx, &cOutChar, xBlockTime );
\r
250 /* Depending on queue sizing and task prioritisation: While we
\r
251 were blocked waiting to post interrupts were not disabled. It is
\r
252 possible that the serial ISR has emptied the Tx queue, in which
\r
253 case we need to start the Tx off again. */
\r
254 if( ( *plTHREEmpty == ( portLONG ) pdTRUE ) && ( xReturn == pdPASS ) )
\r
256 xQueueReceive( xCharsForTx, &cOutChar, serNO_BLOCK );
\r
257 *plTHREEmpty = pdFALSE;
\r
258 UART0_THR = cOutChar;
\r
262 portEXIT_CRITICAL();
\r
266 /*-----------------------------------------------------------*/
\r
268 void vSerialClose( xComPortHandle xPort )
\r
270 /* Not supported as not required by the demo application. */
\r
273 /*-----------------------------------------------------------*/
\r