2 FreeRTOS.org V5.1.1 - Copyright (C) 2003-2008 Richard Barry.
\r
4 This file is part of the FreeRTOS.org distribution.
\r
6 FreeRTOS.org is free software; you can redistribute it and/or modify
\r
7 it under the terms of the GNU General Public License as published by
\r
8 the Free Software Foundation; either version 2 of the License, or
\r
9 (at your option) any later version.
\r
11 FreeRTOS.org is distributed in the hope that it will be useful,
\r
12 but WITHOUT ANY WARRANTY; without even the implied warranty of
\r
13 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
\r
14 GNU General Public License for more details.
\r
16 You should have received a copy of the GNU General Public License
\r
17 along with FreeRTOS.org; if not, write to the Free Software
\r
18 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
\r
20 A special exception to the GPL can be applied should you wish to distribute
\r
21 a combined work that includes FreeRTOS.org, without being obliged to provide
\r
22 the source code for any proprietary components. See the licensing section
\r
23 of http://www.FreeRTOS.org for full details of how and when the exception
\r
26 ***************************************************************************
\r
27 ***************************************************************************
\r
29 * SAVE TIME AND MONEY! We can port FreeRTOS.org to your own hardware, *
\r
30 * and even write all or part of your application on your behalf. *
\r
31 * See http://www.OpenRTOS.com for details of the services we provide to *
\r
32 * expedite your project. *
\r
34 ***************************************************************************
\r
35 ***************************************************************************
\r
37 Please ensure to read the configuration and relevant port sections of the
\r
38 online documentation.
\r
40 http://www.FreeRTOS.org - Documentation, latest information, license and
\r
43 http://www.SafeRTOS.com - A version that is certified for use in safety
\r
46 http://www.OpenRTOS.com - Commercial support, development, porting,
\r
47 licensing and training services.
\r
51 * Creates all the demo application tasks, then starts the scheduler. The WEB
\r
52 * documentation provides more details of the standard demo application tasks.
\r
53 * In addition to the standard demo tasks, the following tasks and tests are
\r
54 * defined and/or created within this file:
\r
56 * "LCD" task - the LCD task is a 'gatekeeper' task. It is the only task that
\r
57 * is permitted to access the display directly. Other tasks wishing to write a
\r
58 * message to the LCD send the message on a queue to the LCD task instead of
\r
59 * accessing the LCD themselves. The LCD task just blocks on the queue waiting
\r
60 * for messages - waking and displaying the messages as they arrive.
\r
62 * "Check" hook - This only executes every five seconds from the tick hook.
\r
63 * Its main function is to check that all the standard demo tasks are still
\r
64 * operational. Should any unexpected behaviour within a demo task be discovered
\r
65 * the tick hook will write an error to the LCD (via the LCD task). If all the
\r
66 * demo tasks are executing with their expected behaviour then the check task
\r
67 * writes PASS to the LCD (again via the LCD task), as described above.
\r
69 * "uIP" task - This is the task that handles the uIP stack. All TCP/IP
\r
70 * processing is performed in this task.
\r
73 /* Scheduler includes. */
\r
74 #include "FreeRTOS.h"
\r
79 /* Demo app includes. */
\r
82 #include "blocktim.h"
\r
83 #include "LCD/portlcd.h"
\r
85 #include "partest.h"
\r
86 #include "GenQTest.h"
\r
88 #include "dynamic.h"
\r
90 /* Demo application definitions. */
\r
91 #define mainQUEUE_SIZE ( 3 )
\r
92 #define mainCHECK_DELAY ( ( portTickType ) 5000 / portTICK_RATE_MS )
\r
93 #define mainBASIC_WEB_STACK_SIZE ( configMINIMAL_STACK_SIZE * 6 )
\r
95 /* Task priorities. */
\r
96 #define mainQUEUE_POLL_PRIORITY ( tskIDLE_PRIORITY + 2 )
\r
97 #define mainCHECK_TASK_PRIORITY ( tskIDLE_PRIORITY + 3 )
\r
98 #define mainBLOCK_Q_PRIORITY ( tskIDLE_PRIORITY + 2 )
\r
99 #define mainFLASH_PRIORITY ( tskIDLE_PRIORITY + 2 )
\r
100 #define mainCREATOR_TASK_PRIORITY ( tskIDLE_PRIORITY + 3 )
\r
101 #define mainGEN_QUEUE_TASK_PRIORITY ( tskIDLE_PRIORITY )
\r
103 /* Constants to setup the PLL. */
\r
104 #define mainPLL_MUL ( ( unsigned portLONG ) ( 8 - 1 ) )
\r
105 #define mainPLL_DIV ( ( unsigned portLONG ) 0x0000 )
\r
106 #define mainCPU_CLK_DIV ( ( unsigned portLONG ) 0x0003 )
\r
107 #define mainPLL_ENABLE ( ( unsigned portLONG ) 0x0001 )
\r
108 #define mainPLL_CONNECT ( ( ( unsigned portLONG ) 0x0002 ) | mainPLL_ENABLE )
\r
109 #define mainPLL_FEED_BYTE1 ( ( unsigned portLONG ) 0xaa )
\r
110 #define mainPLL_FEED_BYTE2 ( ( unsigned portLONG ) 0x55 )
\r
111 #define mainPLL_LOCK ( ( unsigned portLONG ) 0x4000000 )
\r
112 #define mainPLL_CONNECTED ( ( unsigned portLONG ) 0x2000000 )
\r
113 #define mainOSC_ENABLE ( ( unsigned portLONG ) 0x20 )
\r
114 #define mainOSC_STAT ( ( unsigned portLONG ) 0x40 )
\r
115 #define mainOSC_SELECT ( ( unsigned portLONG ) 0x01 )
\r
117 /* Constants to setup the MAM. */
\r
118 #define mainMAM_TIM_3 ( ( unsigned portCHAR ) 0x03 )
\r
119 #define mainMAM_MODE_FULL ( ( unsigned portCHAR ) 0x02 )
\r
122 * The task that handles the uIP stack. All TCP/IP processing is performed in
\r
125 extern void vuIP_Task( void *pvParameters );
\r
128 * The LCD is written two by more than one task so is controlled by a
\r
129 * 'gatekeeper' task. This is the only task that is actually permitted to
\r
130 * access the LCD directly. Other tasks wanting to display a message send
\r
131 * the message to the gatekeeper.
\r
133 static void vLCDTask( void *pvParameters );
\r
135 /* Configure the hardware as required by the demo. */
\r
136 static void prvSetupHardware( void );
\r
138 /* The queue used to send messages to the LCD task. */
\r
139 xQueueHandle xLCDQueue;
\r
141 /*-----------------------------------------------------------*/
\r
145 prvSetupHardware();
\r
147 /* Create the queue used by the LCD task. Messages for display on the LCD
\r
148 are received via this queue. */
\r
149 xLCDQueue = xQueueCreate( mainQUEUE_SIZE, sizeof( xLCDMessage ) );
\r
151 /* Create the uIP task. This uses the lwIP RTOS abstraction layer.*/
\r
152 xTaskCreate( vuIP_Task, ( signed portCHAR * ) "uIP", mainBASIC_WEB_STACK_SIZE, NULL, mainCHECK_TASK_PRIORITY - 1, NULL );
\r
154 /* Start the standard demo tasks. */
\r
155 vStartBlockingQueueTasks( mainBLOCK_Q_PRIORITY );
\r
156 vCreateBlockTimeTasks();
\r
157 vStartLEDFlashTasks( mainFLASH_PRIORITY );
\r
158 vStartGenericQueueTasks( mainGEN_QUEUE_TASK_PRIORITY );
\r
159 vStartQueuePeekTasks();
\r
160 vStartDynamicPriorityTasks();
\r
162 /* Start the tasks defined within this file/specific to this demo. */
\r
163 xTaskCreate( vLCDTask, ( signed portCHAR * ) "LCD", configMINIMAL_STACK_SIZE, NULL, mainCHECK_TASK_PRIORITY - 1, NULL );
\r
165 /* Start the scheduler. */
\r
166 vTaskStartScheduler();
\r
168 /* Will only get here if there was insufficient memory to create the idle
\r
172 /*-----------------------------------------------------------*/
\r
174 void vApplicationTickHook( void )
\r
176 unsigned portBASE_TYPE uxColumn = 0;
\r
177 static xLCDMessage xMessage = { 0, "PASS" };
\r
178 static unsigned portLONG ulTicksSinceLastDisplay = 0;
\r
179 static portBASE_TYPE xHigherPriorityTaskWoken = pdFALSE;
\r
181 /* Called from every tick interrupt. Have enough ticks passed to make it
\r
182 time to perform our health status check again? */
\r
183 ulTicksSinceLastDisplay++;
\r
184 if( ulTicksSinceLastDisplay >= mainCHECK_DELAY )
\r
186 ulTicksSinceLastDisplay = 0;
\r
188 /* Has an error been found in any task? */
\r
190 if( xAreBlockingQueuesStillRunning() != pdTRUE )
\r
192 xMessage.pcMessage = "ERROR - BLOCKQ";
\r
195 if( xAreBlockTimeTestTasksStillRunning() != pdTRUE )
\r
197 xMessage.pcMessage = "ERROR - BLOCKTIM";
\r
200 if( xAreGenericQueueTasksStillRunning() != pdTRUE )
\r
202 xMessage.pcMessage = "ERROR - GENQ";
\r
205 if( xAreQueuePeekTasksStillRunning() != pdTRUE )
\r
207 xMessage.pcMessage = "ERROR - PEEKQ";
\r
210 if( xAreDynamicPriorityTasksStillRunning() != pdTRUE )
\r
212 xMessage.pcMessage = "ERROR - DYNAMIC";
\r
215 xMessage.xColumn++;
\r
217 /* Send the message to the LCD gatekeeper for display. */
\r
218 xHigherPriorityTaskWoken = pdFALSE;
\r
219 xQueueSendToBackFromISR( xLCDQueue, &xMessage, &xHigherPriorityTaskWoken );
\r
222 /*-----------------------------------------------------------*/
\r
224 void vLCDTask( void *pvParameters )
\r
226 xLCDMessage xMessage;
\r
228 /* Initialise the LCD and display a startup message. */
\r
232 LCD_gotoxy( 1, 1 );
\r
233 LCD_puts( "www.FreeRTOS.org" );
\r
237 /* Wait for a message to arrive that requires displaying. */
\r
238 while( xQueueReceive( xLCDQueue, &xMessage, portMAX_DELAY ) != pdPASS );
\r
240 /* Display the message. Print each message to a different position. */
\r
242 LCD_gotoxy( ( xMessage.xColumn & 0x07 ) + 1, ( xMessage.xColumn & 0x01 ) + 1 );
\r
243 LCD_puts( xMessage.pcMessage );
\r
247 /*-----------------------------------------------------------*/
\r
249 static void prvSetupHardware( void )
\r
251 #ifdef RUN_FROM_RAM
\r
252 /* Remap the interrupt vectors to RAM if we are are running from RAM. */
\r
256 /* Disable the PLL. */
\r
258 PLLFEED = mainPLL_FEED_BYTE1;
\r
259 PLLFEED = mainPLL_FEED_BYTE2;
\r
261 /* Configure clock source. */
\r
262 SCS |= mainOSC_ENABLE;
\r
263 while( !( SCS & mainOSC_STAT ) );
\r
264 CLKSRCSEL = mainOSC_SELECT;
\r
266 /* Setup the PLL to multiply the XTAL input by 4. */
\r
267 PLLCFG = ( mainPLL_MUL | mainPLL_DIV );
\r
268 PLLFEED = mainPLL_FEED_BYTE1;
\r
269 PLLFEED = mainPLL_FEED_BYTE2;
\r
271 /* Turn on and wait for the PLL to lock... */
\r
272 PLLCON = mainPLL_ENABLE;
\r
273 PLLFEED = mainPLL_FEED_BYTE1;
\r
274 PLLFEED = mainPLL_FEED_BYTE2;
\r
275 CCLKCFG = mainCPU_CLK_DIV;
\r
276 while( !( PLLSTAT & mainPLL_LOCK ) );
\r
278 /* Connecting the clock. */
\r
279 PLLCON = mainPLL_CONNECT;
\r
280 PLLFEED = mainPLL_FEED_BYTE1;
\r
281 PLLFEED = mainPLL_FEED_BYTE2;
\r
282 while( !( PLLSTAT & mainPLL_CONNECTED ) );
\r
285 This code is commented out as the MAM does not work on the original revision
\r
286 LPC2368 chips. If using Rev B chips then you can increase the speed though
\r
287 the use of the MAM.
\r
289 Setup and turn on the MAM. Three cycle access is used due to the fast
\r
290 PLL used. It is possible faster overall performance could be obtained by
\r
291 tuning the MAM and PLL settings.
\r
293 MAMTIM = mainMAM_TIM_3;
\r
294 MAMCR = mainMAM_MODE_FULL;
\r
297 /* Setup the led's on the MCB2300 board */
\r
298 vParTestInitialise();
\r