2 FreeRTOS.org V4.8.0 - Copyright (C) 2003-2008 Richard Barry.
\r
4 This file is part of the FreeRTOS.org distribution.
\r
6 FreeRTOS.org is free software; you can redistribute it and/or modify
\r
7 it under the terms of the GNU General Public License as published by
\r
8 the Free Software Foundation; either version 2 of the License, or
\r
9 (at your option) any later version.
\r
11 FreeRTOS.org is distributed in the hope that it will be useful,
\r
12 but WITHOUT ANY WARRANTY; without even the implied warranty of
\r
13 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
\r
14 GNU General Public License for more details.
\r
16 You should have received a copy of the GNU General Public License
\r
17 along with FreeRTOS.org; if not, write to the Free Software
\r
18 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
\r
20 A special exception to the GPL can be applied should you wish to distribute
\r
21 a combined work that includes FreeRTOS.org, without being obliged to provide
\r
22 the source code for any proprietary components. See the licensing section
\r
23 of http://www.FreeRTOS.org for full details of how and when the exception
\r
26 ***************************************************************************
\r
27 ***************************************************************************
\r
29 * SAVE TIME AND MONEY! We can port FreeRTOS.org to your own hardware, *
\r
30 * and even write all or part of your application on your behalf. *
\r
31 * See http://www.OpenRTOS.com for details of the services we provide to *
\r
32 * expedite your project. *
\r
34 ***************************************************************************
\r
35 ***************************************************************************
\r
37 Please ensure to read the configuration and relevant port sections of the
\r
38 online documentation.
\r
40 http://www.FreeRTOS.org - Documentation, latest information, license and
\r
43 http://www.SafeRTOS.com - A version that is certified for use in safety
\r
46 http://www.OpenRTOS.com - Commercial support, development, porting,
\r
47 licensing and training services.
\r
51 BASIC INTERRUPT DRIVEN SERIAL PORT DRIVER FOR UART0.
\r
54 /* Library includes. */
\r
59 /* Scheduler includes. */
\r
60 #include "FreeRTOS.h"
\r
63 /* Demo application includes. */
\r
66 #define UART0_Rx_Pin ( 0x0001<< 8 )
\r
67 #define UART0_Tx_Pin ( 0x0001<< 9 )
\r
69 #define serINVALID_QUEUE ( ( xQueueHandle ) 0 )
\r
70 #define serNO_BLOCK ( ( portTickType ) 0 )
\r
72 /* Macros to turn on and off the Tx empty interrupt. */
\r
73 #define serINTERRUPT_ON() UART0->IER |= UART_TxHalfEmpty
\r
74 #define serINTERRUPT_OFF() UART0->IER &= ~UART_TxHalfEmpty
\r
76 /*-----------------------------------------------------------*/
\r
78 /* Queues used to hold received characters, and characters waiting to be
\r
80 static xQueueHandle xRxedChars;
\r
81 static xQueueHandle xCharsForTx;
\r
83 /*-----------------------------------------------------------*/
\r
85 /* Interrupt entry point written in the assembler file serialISR.s79. */
\r
86 extern void vSerialISREntry( void );
\r
88 /* The interrupt service routine - called from the assembly entry point. */
\r
89 __arm void vSerialISR( void );
\r
91 /*-----------------------------------------------------------*/
\r
94 * See the serial2.h header file.
\r
96 xComPortHandle xSerialPortInitMinimal( unsigned portLONG ulWantedBaud, unsigned portBASE_TYPE uxQueueLength )
\r
98 xComPortHandle xReturn;
\r
100 /* Create the queues used to hold Rx and Tx characters. */
\r
101 xRxedChars = xQueueCreate( uxQueueLength, ( unsigned portBASE_TYPE ) sizeof( signed portCHAR ) );
\r
102 xCharsForTx = xQueueCreate( uxQueueLength + 1, ( unsigned portBASE_TYPE ) sizeof( signed portCHAR ) );
\r
104 /* If the queues were created correctly then setup the serial port
\r
106 if( ( xRxedChars != serINVALID_QUEUE ) && ( xCharsForTx != serINVALID_QUEUE ) )
\r
108 portENTER_CRITICAL();
\r
110 /* Setup the UART port pins. */
\r
111 GPIO_Config( GPIO0, UART0_Tx_Pin, GPIO_AF_PP );
\r
112 GPIO_Config( GPIO0, UART0_Rx_Pin, GPIO_IN_TRI_CMOS );
\r
114 /* Configure the UART. */
\r
115 UART_OnOffConfig( UART0, ENABLE );
\r
116 UART_FifoConfig( UART0, DISABLE );
\r
117 UART_FifoReset( UART0, UART_RxFIFO );
\r
118 UART_FifoReset( UART0, UART_TxFIFO );
\r
119 UART_LoopBackConfig(UART0, DISABLE );
\r
120 UART_Config( UART0, ulWantedBaud, UART_NO_PARITY, UART_1_StopBits, UARTM_8D );
\r
121 UART_RxConfig( UART0, ENABLE );
\r
123 /* Configure the IEC for the UART interrupts. */
\r
124 EIC_IRQChannelPriorityConfig( UART0_IRQChannel, 1 );
\r
125 EIC_IRQChannelConfig( UART0_IRQChannel, ENABLE );
\r
126 EIC_IRQConfig( ENABLE );
\r
127 UART_ItConfig( UART0, UART_RxBufFull, ENABLE );
\r
129 portEXIT_CRITICAL();
\r
133 xReturn = ( xComPortHandle ) 0;
\r
136 /* This demo file only supports a single port but we have to return
\r
137 something to comply with the standard demo header file. */
\r
140 /*-----------------------------------------------------------*/
\r
142 signed portBASE_TYPE xSerialGetChar( xComPortHandle pxPort, signed portCHAR *pcRxedChar, portTickType xBlockTime )
\r
144 /* The port handle is not required as this driver only supports one port. */
\r
147 /* Get the next character from the buffer. Return false if no characters
\r
148 are available, or arrive before xBlockTime expires. */
\r
149 if( xQueueReceive( xRxedChars, pcRxedChar, xBlockTime ) )
\r
158 /*-----------------------------------------------------------*/
\r
160 void vSerialPutString( xComPortHandle pxPort, const signed portCHAR * const pcString, unsigned portSHORT usStringLength )
\r
162 signed portCHAR *pxNext;
\r
164 /* A couple of parameters that this port does not use. */
\r
165 ( void ) usStringLength;
\r
168 /* NOTE: This implementation does not handle the queue being full as no
\r
169 block time is used! */
\r
171 /* The port handle is not required as this driver only supports UART0. */
\r
174 /* Send each character in the string, one at a time. */
\r
175 pxNext = ( signed portCHAR * ) pcString;
\r
178 xSerialPutChar( pxPort, *pxNext, serNO_BLOCK );
\r
182 /*-----------------------------------------------------------*/
\r
184 signed portBASE_TYPE xSerialPutChar( xComPortHandle pxPort, signed portCHAR cOutChar, portTickType xBlockTime )
\r
186 /* Place the character in the queue of characters to be transmitted. */
\r
187 if( xQueueSend( xCharsForTx, &cOutChar, xBlockTime ) != pdPASS )
\r
192 /* Turn on the Tx interrupt so the ISR will remove the character from the
\r
193 queue and send it. This does not need to be in a critical section as
\r
194 if the interrupt has already removed the character the next interrupt
\r
195 will simply turn off the Tx interrupt again. */
\r
200 /*-----------------------------------------------------------*/
\r
202 void vSerialClose( xComPortHandle xPort )
\r
204 /* Not supported as not required by the demo application. */
\r
206 /*-----------------------------------------------------------*/
\r
208 /* Serial port ISR. This can cause a context switch so is not defined as a
\r
209 standard ISR using the __irq keyword. Instead a wrapper function is defined
\r
210 within serialISR.s79 which in turn calls this function. See the port
\r
211 documentation on the FreeRTOS.org website for more information. */
\r
212 __arm void vSerialISR( void )
\r
214 unsigned portSHORT usStatus;
\r
215 signed portCHAR cChar;
\r
216 portBASE_TYPE xHigherPriorityTaskWoken = pdFALSE;
\r
218 /* What caused the interrupt? */
\r
219 usStatus = UART_FlagStatus( UART0 );
\r
221 if( usStatus & UART_TxHalfEmpty )
\r
223 /* The interrupt was caused by the THR becoming empty. Are there any
\r
224 more characters to transmit? */
\r
225 if( xQueueReceiveFromISR( xCharsForTx, &cChar, &xHigherPriorityTaskWoken ) == pdTRUE )
\r
227 /* A character was retrieved from the queue so can be sent to the
\r
229 UART0->TxBUFR = cChar;
\r
233 /* Queue empty, nothing to send so turn off the Tx interrupt. */
\r
234 serINTERRUPT_OFF();
\r
238 if( usStatus & UART_RxBufFull )
\r
240 /* The interrupt was caused by a character being received. Grab the
\r
241 character from the RHR and place it in the queue of received
\r
243 cChar = UART0->RxBUFR;
\r
244 xQueueSendFromISR( xRxedChars, &cChar, &xHigherPriorityTaskWoken );
\r
247 /* If a task was woken by either a character being received or a character
\r
248 being transmitted then we may need to switch to another task. */
\r
249 portEND_SWITCHING_ISR( xHigherPriorityTaskWoken );
\r
251 /* End the interrupt in the EIC. */
\r