2 FreeRTOS V7.0.1 - Copyright (C) 2011 Real Time Engineers Ltd.
\r
5 ***************************************************************************
\r
7 * FreeRTOS tutorial books are available in pdf and paperback. *
\r
8 * Complete, revised, and edited pdf reference manuals are also *
\r
11 * Purchasing FreeRTOS documentation will not only help you, by *
\r
12 * ensuring you get running as quickly as possible and with an *
\r
13 * in-depth knowledge of how to use FreeRTOS, it will also help *
\r
14 * the FreeRTOS project to continue with its mission of providing *
\r
15 * professional grade, cross platform, de facto standard solutions *
\r
16 * for microcontrollers - completely free of charge! *
\r
18 * >>> See http://www.FreeRTOS.org/Documentation for details. <<< *
\r
20 * Thank you for using FreeRTOS, and thank you for your support! *
\r
22 ***************************************************************************
\r
25 This file is part of the FreeRTOS distribution.
\r
27 FreeRTOS is free software; you can redistribute it and/or modify it under
\r
28 the terms of the GNU General Public License (version 2) as published by the
\r
29 Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
\r
30 >>>NOTE<<< The modification to the GPL is included to allow you to
\r
31 distribute a combined work that includes FreeRTOS without being obliged to
\r
32 provide the source code for proprietary components outside of the FreeRTOS
\r
33 kernel. FreeRTOS is distributed in the hope that it will be useful, but
\r
34 WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
\r
35 or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
\r
36 more details. You should have received a copy of the GNU General Public
\r
37 License and the FreeRTOS license exception along with FreeRTOS; if not it
\r
38 can be viewed here: http://www.freertos.org/a00114.html and also obtained
\r
39 by writing to Richard Barry, contact details for whom are available on the
\r
44 http://www.FreeRTOS.org - Documentation, latest information, license and
\r
47 http://www.SafeRTOS.com - A version that is certified for use in safety
\r
50 http://www.OpenRTOS.com - Commercial support, development, porting,
\r
51 licensing and training services.
\r
55 BASIC INTERRUPT DRIVEN SERIAL PORT DRIVER FOR UART0.
\r
59 /*-----------------------------------------------------------
\r
60 * Components that can be compiled to either ARM or THUMB mode are
\r
61 * contained in this file.c The ISR routines, which can only be compiled
\r
62 * to ARM mode, are contained in serialISR.c.
\r
63 *----------------------------------------------------------*/
\r
67 /* Library includes. */
\r
68 #include "75x_uart.h"
\r
69 #include "75x_gpio.h"
\r
70 #include "75x_eic.h"
\r
71 #include "75x_mrcc.h"
\r
73 /* Scheduler includes. */
\r
74 #include "FreeRTOS.h"
\r
77 /* Demo application includes. */
\r
80 #define serINVALID_QUEUE ( ( xQueueHandle ) 0 )
\r
81 #define serNO_BLOCK ( ( portTickType ) 0 )
\r
83 /*-----------------------------------------------------------*/
\r
85 /* Queues used to hold received characters, and characters waiting to be
\r
87 static xQueueHandle xRxedChars;
\r
88 static xQueueHandle xCharsForTx;
\r
90 static volatile portBASE_TYPE xQueueEmpty = pdTRUE;
\r
92 /*-----------------------------------------------------------*/
\r
94 /* The interrupt service routine - called from the assembly entry point. */
\r
95 void vSerialISR( void );
\r
96 void vConfigureQueues( xQueueHandle xQForRx, xQueueHandle xQForTx, volatile portBASE_TYPE *pxEmptyFlag );
\r
98 /*-----------------------------------------------------------*/
\r
101 * See the serial2.h header file.
\r
103 xComPortHandle xSerialPortInitMinimal( unsigned long ulWantedBaud, unsigned portBASE_TYPE uxQueueLength )
\r
105 xComPortHandle xReturn;
\r
106 UART_InitTypeDef UART_InitStructure;
\r
107 GPIO_InitTypeDef GPIO_InitStructure;
\r
108 EIC_IRQInitTypeDef EIC_IRQInitStructure;
\r
110 /* Create the queues used to hold Rx and Tx characters. */
\r
111 xRxedChars = xQueueCreate( uxQueueLength, ( unsigned portBASE_TYPE ) sizeof( signed char ) );
\r
112 xCharsForTx = xQueueCreate( uxQueueLength + 1, ( unsigned portBASE_TYPE ) sizeof( signed char ) );
\r
114 /* If the queues were created correctly then setup the serial port
\r
116 if( ( xRxedChars != serINVALID_QUEUE ) && ( xCharsForTx != serINVALID_QUEUE ) )
\r
119 vConfigureQueues( xRxedChars, xCharsForTx, &xQueueEmpty );
\r
121 portENTER_CRITICAL();
\r
123 /* Enable the UART0 Clock. */
\r
124 MRCC_PeripheralClockConfig( MRCC_Peripheral_UART0, ENABLE );
\r
126 /* Configure the UART0_Tx as alternate function */
\r
127 GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
\r
128 GPIO_InitStructure.GPIO_Pin = GPIO_Pin_11;
\r
129 GPIO_Init(GPIO0, &GPIO_InitStructure);
\r
131 /* Configure the UART0_Rx as input floating */
\r
132 GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
\r
133 GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10;
\r
134 GPIO_Init(GPIO0, &GPIO_InitStructure);
\r
136 /* Configure UART0. */
\r
137 UART_InitStructure.UART_WordLength = UART_WordLength_8D;
\r
138 UART_InitStructure.UART_StopBits = UART_StopBits_1;
\r
139 UART_InitStructure.UART_Parity = UART_Parity_No;
\r
140 UART_InitStructure.UART_BaudRate = ulWantedBaud;
\r
141 UART_InitStructure.UART_HardwareFlowControl = UART_HardwareFlowControl_None;
\r
142 UART_InitStructure.UART_Mode = UART_Mode_Tx_Rx;
\r
143 UART_InitStructure.UART_TxFIFOLevel = UART_FIFOLevel_1_2; /* FIFO size 16 bytes, FIFO level 8 bytes */
\r
144 UART_InitStructure.UART_RxFIFOLevel = UART_FIFOLevel_1_2; /* FIFO size 16 bytes, FIFO level 8 bytes */
\r
145 UART_Init(UART0, &UART_InitStructure);
\r
147 /* Enable the UART0 */
\r
148 UART_Cmd(UART0, ENABLE);
\r
150 /* Configure the IEC for the UART interrupts. */
\r
151 EIC_IRQInitStructure.EIC_IRQChannelCmd = ENABLE;
\r
152 EIC_IRQInitStructure.EIC_IRQChannel = UART0_IRQChannel;
\r
153 EIC_IRQInitStructure.EIC_IRQChannelPriority = 1;
\r
154 EIC_IRQInit(&EIC_IRQInitStructure);
\r
156 xQueueEmpty = pdTRUE;
\r
157 UART_ITConfig( UART0, UART_IT_Transmit | UART_IT_Receive, ENABLE );
\r
159 portEXIT_CRITICAL();
\r
163 xReturn = ( xComPortHandle ) 0;
\r
166 /* This demo file only supports a single port but we have to return
\r
167 something to comply with the standard demo header file. */
\r
170 /*-----------------------------------------------------------*/
\r
172 signed portBASE_TYPE xSerialGetChar( xComPortHandle pxPort, signed char *pcRxedChar, portTickType xBlockTime )
\r
174 /* The port handle is not required as this driver only supports one port. */
\r
177 /* Get the next character from the buffer. Return false if no characters
\r
178 are available, or arrive before xBlockTime expires. */
\r
179 if( xQueueReceive( xRxedChars, pcRxedChar, xBlockTime ) )
\r
188 /*-----------------------------------------------------------*/
\r
190 void vSerialPutString( xComPortHandle pxPort, const signed char * const pcString, unsigned short usStringLength )
\r
192 signed char *pxNext;
\r
194 /* A couple of parameters that this port does not use. */
\r
195 ( void ) usStringLength;
\r
198 /* NOTE: This implementation does not handle the queue being full as no
\r
199 block time is used! */
\r
201 /* The port handle is not required as this driver only supports UART0. */
\r
204 /* Send each character in the string, one at a time. */
\r
205 pxNext = ( signed char * ) pcString;
\r
208 xSerialPutChar( pxPort, *pxNext, serNO_BLOCK );
\r
212 /*-----------------------------------------------------------*/
\r
214 signed portBASE_TYPE xSerialPutChar( xComPortHandle pxPort, signed char cOutChar, portTickType xBlockTime )
\r
216 portBASE_TYPE xReturn;
\r
218 /* Place the character in the queue of characters to be transmitted. */
\r
219 portENTER_CRITICAL();
\r
221 if( xQueueEmpty == pdTRUE )
\r
223 UART0->DR = cOutChar;
\r
228 if( xQueueSend( xCharsForTx, &cOutChar, xBlockTime ) != pdPASS )
\r
238 xQueueEmpty = pdFALSE;
\r
240 portEXIT_CRITICAL();
\r
244 /*-----------------------------------------------------------*/
\r
246 void vSerialClose( xComPortHandle xPort )
\r
248 /* Not supported as not required by the demo application. */
\r
250 /*-----------------------------------------------------------*/
\r