2 FreeRTOS.org V4.3.0 - Copyright (C) 2003-2007 Richard Barry.
\r
4 This file is part of the FreeRTOS.org distribution.
\r
6 FreeRTOS.org is free software; you can redistribute it and/or modify
\r
7 it under the terms of the GNU General Public License as published by
\r
8 the Free Software Foundation; either version 2 of the License, or
\r
9 (at your option) any later version.
\r
11 FreeRTOS.org is distributed in the hope that it will be useful,
\r
12 but WITHOUT ANY WARRANTY; without even the implied warranty of
\r
13 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
\r
14 GNU General Public License for more details.
\r
16 You should have received a copy of the GNU General Public License
\r
17 along with FreeRTOS.org; if not, write to the Free Software
\r
18 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
\r
20 A special exception to the GPL can be applied should you wish to distribute
\r
21 a combined work that includes FreeRTOS.org, without being obliged to provide
\r
22 the source code for any proprietary components. See the licensing section
\r
23 of http://www.FreeRTOS.org for full details of how and when the exception
\r
26 ***************************************************************************
\r
27 See http://www.FreeRTOS.org for documentation, latest information, license
\r
28 and contact details. Please ensure to read the configuration and relevant
\r
29 port sections of the online documentation.
\r
31 Also see http://www.SafeRTOS.com for an IEC 61508 compliant version along
\r
32 with commercial development and support options.
\r
33 ***************************************************************************
\r
37 BASIC INTERRUPT DRIVEN SERIAL PORT DRIVER FOR UART0.
\r
41 /*-----------------------------------------------------------
\r
42 * Components that can be compiled to either ARM or THUMB mode are
\r
43 * contained in this file.c The ISR routines, which can only be compiled
\r
44 * to ARM mode, are contained in serialISR.c.
\r
45 *----------------------------------------------------------*/
\r
49 /* Library includes. */
\r
50 #include "75x_uart.h"
\r
51 #include "75x_gpio.h"
\r
52 #include "75x_eic.h"
\r
53 #include "75x_mrcc.h"
\r
55 /* Scheduler includes. */
\r
56 #include "FreeRTOS.h"
\r
59 /* Demo application includes. */
\r
62 #define serINVALID_QUEUE ( ( xQueueHandle ) 0 )
\r
63 #define serNO_BLOCK ( ( portTickType ) 0 )
\r
65 /*-----------------------------------------------------------*/
\r
67 /* Queues used to hold received characters, and characters waiting to be
\r
69 static xQueueHandle xRxedChars;
\r
70 static xQueueHandle xCharsForTx;
\r
72 static volatile portBASE_TYPE xQueueEmpty = pdTRUE;
\r
74 /*-----------------------------------------------------------*/
\r
76 /* The interrupt service routine - called from the assembly entry point. */
\r
77 void vSerialISR( void );
\r
78 void vConfigureQueues( xQueueHandle xQForRx, xQueueHandle xQForTx, volatile portBASE_TYPE *pxEmptyFlag );
\r
80 /*-----------------------------------------------------------*/
\r
83 * See the serial2.h header file.
\r
85 xComPortHandle xSerialPortInitMinimal( unsigned portLONG ulWantedBaud, unsigned portBASE_TYPE uxQueueLength )
\r
87 xComPortHandle xReturn;
\r
88 UART_InitTypeDef UART_InitStructure;
\r
89 GPIO_InitTypeDef GPIO_InitStructure;
\r
90 EIC_IRQInitTypeDef EIC_IRQInitStructure;
\r
92 /* Create the queues used to hold Rx and Tx characters. */
\r
93 xRxedChars = xQueueCreate( uxQueueLength, ( unsigned portBASE_TYPE ) sizeof( signed portCHAR ) );
\r
94 xCharsForTx = xQueueCreate( uxQueueLength + 1, ( unsigned portBASE_TYPE ) sizeof( signed portCHAR ) );
\r
96 /* If the queues were created correctly then setup the serial port
\r
98 if( ( xRxedChars != serINVALID_QUEUE ) && ( xCharsForTx != serINVALID_QUEUE ) )
\r
101 vConfigureQueues( xRxedChars, xCharsForTx, &xQueueEmpty );
\r
103 portENTER_CRITICAL();
\r
105 /* Enable the UART0 Clock. */
\r
106 MRCC_PeripheralClockConfig( MRCC_Peripheral_UART0, ENABLE );
\r
108 /* Configure the UART0_Tx as alternate function */
\r
109 GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
\r
110 GPIO_InitStructure.GPIO_Pin = GPIO_Pin_11;
\r
111 GPIO_Init(GPIO0, &GPIO_InitStructure);
\r
113 /* Configure the UART0_Rx as input floating */
\r
114 GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
\r
115 GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10;
\r
116 GPIO_Init(GPIO0, &GPIO_InitStructure);
\r
118 /* Configure UART0. */
\r
119 UART_InitStructure.UART_WordLength = UART_WordLength_8D;
\r
120 UART_InitStructure.UART_StopBits = UART_StopBits_1;
\r
121 UART_InitStructure.UART_Parity = UART_Parity_No;
\r
122 UART_InitStructure.UART_BaudRate = ulWantedBaud;
\r
123 UART_InitStructure.UART_HardwareFlowControl = UART_HardwareFlowControl_None;
\r
124 UART_InitStructure.UART_Mode = UART_Mode_Tx_Rx;
\r
125 UART_InitStructure.UART_TxFIFOLevel = UART_FIFOLevel_1_2; /* FIFO size 16 bytes, FIFO level 8 bytes */
\r
126 UART_InitStructure.UART_RxFIFOLevel = UART_FIFOLevel_1_2; /* FIFO size 16 bytes, FIFO level 8 bytes */
\r
127 UART_Init(UART0, &UART_InitStructure);
\r
129 /* Enable the UART0 */
\r
130 UART_Cmd(UART0, ENABLE);
\r
132 /* Configure the IEC for the UART interrupts. */
\r
133 EIC_IRQInitStructure.EIC_IRQChannelCmd = ENABLE;
\r
134 EIC_IRQInitStructure.EIC_IRQChannel = UART0_IRQChannel;
\r
135 EIC_IRQInitStructure.EIC_IRQChannelPriority = 1;
\r
136 EIC_IRQInit(&EIC_IRQInitStructure);
\r
138 xQueueEmpty = pdTRUE;
\r
139 UART_ITConfig( UART0, UART_IT_Transmit | UART_IT_Receive, ENABLE );
\r
141 portEXIT_CRITICAL();
\r
145 xReturn = ( xComPortHandle ) 0;
\r
148 /* This demo file only supports a single port but we have to return
\r
149 something to comply with the standard demo header file. */
\r
152 /*-----------------------------------------------------------*/
\r
154 signed portBASE_TYPE xSerialGetChar( xComPortHandle pxPort, signed portCHAR *pcRxedChar, portTickType xBlockTime )
\r
156 /* The port handle is not required as this driver only supports one port. */
\r
159 /* Get the next character from the buffer. Return false if no characters
\r
160 are available, or arrive before xBlockTime expires. */
\r
161 if( xQueueReceive( xRxedChars, pcRxedChar, xBlockTime ) )
\r
170 /*-----------------------------------------------------------*/
\r
172 void vSerialPutString( xComPortHandle pxPort, const signed portCHAR * const pcString, unsigned portSHORT usStringLength )
\r
174 signed portCHAR *pxNext;
\r
176 /* A couple of parameters that this port does not use. */
\r
177 ( void ) usStringLength;
\r
180 /* NOTE: This implementation does not handle the queue being full as no
\r
181 block time is used! */
\r
183 /* The port handle is not required as this driver only supports UART0. */
\r
186 /* Send each character in the string, one at a time. */
\r
187 pxNext = ( signed portCHAR * ) pcString;
\r
190 xSerialPutChar( pxPort, *pxNext, serNO_BLOCK );
\r
194 /*-----------------------------------------------------------*/
\r
196 signed portBASE_TYPE xSerialPutChar( xComPortHandle pxPort, signed portCHAR cOutChar, portTickType xBlockTime )
\r
198 portBASE_TYPE xReturn;
\r
200 /* Place the character in the queue of characters to be transmitted. */
\r
201 portENTER_CRITICAL();
\r
203 if( xQueueEmpty == pdTRUE )
\r
205 UART0->DR = cOutChar;
\r
210 if( xQueueSend( xCharsForTx, &cOutChar, xBlockTime ) != pdPASS )
\r
220 xQueueEmpty = pdFALSE;
\r
222 portEXIT_CRITICAL();
\r
226 /*-----------------------------------------------------------*/
\r
228 void vSerialClose( xComPortHandle xPort )
\r
230 /* Not supported as not required by the demo application. */
\r
232 /*-----------------------------------------------------------*/
\r