2 FreeRTOS.org V5.1.1 - Copyright (C) 2003-2008 Richard Barry.
\r
4 This file is part of the FreeRTOS distribution.
\r
6 FreeRTOS is free software; you can redistribute it and/or modify
\r
7 it under the terms of the GNU General Public License as published by
\r
8 the Free Software Foundation; either version 2 of the License, or
\r
9 (at your option) any later version.
\r
11 FreeRTOS is distributed in the hope that it will be useful,
\r
12 but WITHOUT ANY WARRANTY; without even the implied warranty of
\r
13 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
\r
14 GNU General Public License for more details.
\r
16 You should have received a copy of the GNU General Public License
\r
17 along with FreeRTOS; if not, write to the Free Software
\r
18 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
\r
20 A special exception to the GPL can be applied should you wish to distribute
\r
21 a combined work that includes FreeRTOS, without being obliged to provide
\r
22 the source code for any proprietary components. See the licensing section
\r
23 of http://www.FreeRTOS.org for full details of how and when the exception
\r
26 ***************************************************************************
\r
27 ***************************************************************************
\r
29 * SAVE TIME AND MONEY! We can port FreeRTOS.org to your own hardware, *
\r
30 * and even write all or part of your application on your behalf. *
\r
31 * See http://www.OpenRTOS.com for details of the services we provide to *
\r
32 * expedite your project. *
\r
34 ***************************************************************************
\r
35 ***************************************************************************
\r
37 Please ensure to read the configuration and relevant port sections of the
\r
38 online documentation.
\r
40 http://www.FreeRTOS.org - Documentation, latest information, license and
\r
43 http://www.SafeRTOS.com - A version that is certified for use in safety
\r
46 http://www.OpenRTOS.com - Commercial support, development, porting,
\r
47 licensing and training services.
\r
51 BASIC INTERRUPT DRIVEN SERIAL PORT DRIVER FOR UART1.
\r
54 /* Library includes. */
\r
55 #include "91x_lib.h"
\r
57 /* Scheduler includes. */
\r
58 #include "FreeRTOS.h"
\r
62 /* Demo application includes. */
\r
64 /*-----------------------------------------------------------*/
\r
67 #define serINVALID_QUEUE ( ( xQueueHandle ) 0 )
\r
68 #define serNO_BLOCK ( ( portTickType ) 0 )
\r
69 #define serTX_BLOCK_TIME ( 40 / portTICK_RATE_MS )
\r
71 /* Interrupt and status bit definitions. */
\r
72 #define mainTXRIS 0x20
\r
73 #define mainRXRIS 0x50
\r
74 #define serTX_FIFO_FULL 0x20
\r
75 #define serCLEAR_ALL_INTERRUPTS 0x3ff
\r
76 /*-----------------------------------------------------------*/
\r
78 /* The queue used to hold received characters. */
\r
79 static xQueueHandle xRxedChars;
\r
81 /* The semaphore used to wake a task waiting for space to become available
\r
83 static xSemaphoreHandle xTxFIFOSemaphore;
\r
85 /*-----------------------------------------------------------*/
\r
87 /* UART interrupt handler. */
\r
88 void UART1_IRQHandler( void );
\r
90 /* The interrupt service routine - called from the assembly entry point. */
\r
91 __arm void UART1_IRQHandler( void );
\r
93 /*-----------------------------------------------------------*/
\r
95 /* Flag to indicate whether or not a task is blocked waiting for space on
\r
97 static portLONG lTaskWaiting = pdFALSE;
\r
100 * See the serial2.h header file.
\r
102 xComPortHandle xSerialPortInitMinimal( unsigned portLONG ulWantedBaud, unsigned portBASE_TYPE uxQueueLength )
\r
104 xComPortHandle xReturn;
\r
105 UART_InitTypeDef xUART1_Init;
\r
106 GPIO_InitTypeDef GPIO_InitStructure;
\r
108 /* Create the queues used to hold Rx characters. */
\r
109 xRxedChars = xQueueCreate( uxQueueLength, ( unsigned portBASE_TYPE ) sizeof( signed portCHAR ) );
\r
111 /* Create the semaphore used to wake a task waiting for space to become
\r
112 available in the FIFO. */
\r
113 vSemaphoreCreateBinary( xTxFIFOSemaphore );
\r
115 /* If the queue/semaphore was created correctly then setup the serial port
\r
117 if( ( xRxedChars != serINVALID_QUEUE ) && ( xTxFIFOSemaphore != serINVALID_QUEUE ) )
\r
119 /* Pre take the semaphore so a task will block if it tries to access
\r
121 xSemaphoreTake( xTxFIFOSemaphore, 0 );
\r
123 /* Configure the UART. */
\r
124 xUART1_Init.UART_WordLength = UART_WordLength_8D;
\r
125 xUART1_Init.UART_StopBits = UART_StopBits_1;
\r
126 xUART1_Init.UART_Parity = UART_Parity_No;
\r
127 xUART1_Init.UART_BaudRate = ulWantedBaud;
\r
128 xUART1_Init.UART_HardwareFlowControl = UART_HardwareFlowControl_None;
\r
129 xUART1_Init.UART_Mode = UART_Mode_Tx_Rx;
\r
130 xUART1_Init.UART_FIFO = UART_FIFO_Enable;
\r
132 /* Enable the UART1 Clock */
\r
133 SCU_APBPeriphClockConfig( __UART1, ENABLE );
\r
135 /* Enable the GPIO3 Clock */
\r
136 SCU_APBPeriphClockConfig( __GPIO3, ENABLE );
\r
138 /* Configure UART1_Rx pin GPIO3.2 */
\r
139 GPIO_InitStructure.GPIO_Direction = GPIO_PinInput;
\r
140 GPIO_InitStructure.GPIO_Pin = GPIO_Pin_2;
\r
141 GPIO_InitStructure.GPIO_Type = GPIO_Type_PushPull ;
\r
142 GPIO_InitStructure.GPIO_IPConnected = GPIO_IPConnected_Enable;
\r
143 GPIO_InitStructure.GPIO_Alternate = GPIO_InputAlt1 ;
\r
144 GPIO_Init( GPIO3, &GPIO_InitStructure );
\r
146 /* Configure UART1_Tx pin GPIO3.3 */
\r
147 GPIO_InitStructure.GPIO_Direction = GPIO_PinOutput;
\r
148 GPIO_InitStructure.GPIO_Pin = GPIO_Pin_3;
\r
149 GPIO_InitStructure.GPIO_Type = GPIO_Type_PushPull ;
\r
150 GPIO_InitStructure.GPIO_IPConnected = GPIO_IPConnected_Enable;
\r
151 GPIO_InitStructure.GPIO_Alternate = GPIO_OutputAlt2 ;
\r
152 GPIO_Init( GPIO3, &GPIO_InitStructure );
\r
155 portENTER_CRITICAL();
\r
157 /* Configure the UART itself. */
\r
158 UART_DeInit( UART1 );
\r
159 UART_Init( UART1, &xUART1_Init );
\r
160 UART_ITConfig( UART1, UART_IT_Receive | UART_IT_Transmit, ENABLE );
\r
161 UART1->ICR = serCLEAR_ALL_INTERRUPTS;
\r
162 UART_LoopBackConfig( UART1, DISABLE );
\r
163 UART_IrDACmd( IrDA1, DISABLE );
\r
165 /* Configure the VIC for the UART interrupts. */
\r
166 VIC_Config( UART1_ITLine, VIC_IRQ, 9 );
\r
167 VIC_ITCmd( UART1_ITLine, ENABLE );
\r
169 UART_Cmd( UART1, ENABLE );
\r
170 lTaskWaiting = pdFALSE;
\r
172 portEXIT_CRITICAL();
\r
176 xReturn = ( xComPortHandle ) 0;
\r
179 /* This demo file only supports a single port but we have to return
\r
180 something to comply with the standard demo header file. */
\r
183 /*-----------------------------------------------------------*/
\r
185 signed portBASE_TYPE xSerialGetChar( xComPortHandle pxPort, signed portCHAR *pcRxedChar, portTickType xBlockTime )
\r
187 /* The port handle is not required as this driver only supports one port. */
\r
190 /* Get the next character from the buffer. Return false if no characters
\r
191 are available, or arrive before xBlockTime expires. */
\r
192 if( xQueueReceive( xRxedChars, pcRxedChar, xBlockTime ) )
\r
201 /*-----------------------------------------------------------*/
\r
203 void vSerialPutString( xComPortHandle pxPort, const signed portCHAR * const pcString, unsigned portSHORT usStringLength )
\r
205 signed portCHAR *pxNext;
\r
207 /* A couple of parameters that this port does not use. */
\r
208 ( void ) usStringLength;
\r
211 /* NOTE: This implementation does not handle the queue being full as no
\r
212 block time is used! */
\r
214 /* The port handle is not required as this driver only supports UART1. */
\r
217 /* Send each character in the string, one at a time. */
\r
218 pxNext = ( signed portCHAR * ) pcString;
\r
221 xSerialPutChar( pxPort, *pxNext, serNO_BLOCK );
\r
225 /*-----------------------------------------------------------*/
\r
227 signed portBASE_TYPE xSerialPutChar( xComPortHandle pxPort, signed portCHAR cOutChar, portTickType xBlockTime )
\r
229 portBASE_TYPE xReturn;
\r
231 portENTER_CRITICAL();
\r
233 /* Can we write to the FIFO? */
\r
234 if( UART1->FR & serTX_FIFO_FULL )
\r
236 /* Wait for the interrupt letting us know there is space on the
\r
237 FIFO. It is ok to block in a critical section, interrupts will be
\r
238 enabled for other tasks once we force a switch. */
\r
239 lTaskWaiting = pdTRUE;
\r
241 /* Just to be a bit different this driver uses a semaphore to
\r
242 block the sending task when the FIFO is full. The standard COMTest
\r
243 task assumes a queue of adequate length exists so does not use
\r
244 a block time. For this demo the block time is therefore hard
\r
246 xReturn = xSemaphoreTake( xTxFIFOSemaphore, serTX_BLOCK_TIME );
\r
249 UART1->DR = cOutChar;
\r
254 UART1->DR = cOutChar;
\r
258 portEXIT_CRITICAL();
\r
262 /*-----------------------------------------------------------*/
\r
264 void vSerialClose( xComPortHandle xPort )
\r
266 /* Not supported as not required by the demo application. */
\r
268 /*-----------------------------------------------------------*/
\r
270 void UART1_IRQHandler( void )
\r
272 signed portCHAR cChar;
\r
273 portBASE_TYPE xHigherPriorityTaskWoken = pdFALSE;
\r
275 while( UART1->RIS & mainRXRIS )
\r
277 /* The interrupt was caused by a character being received. Grab the
\r
278 character from the DR and place it in the queue of received
\r
281 xQueueSendFromISR( xRxedChars, &cChar, &xHigherPriorityTaskWoken );
\r
284 if( UART1->RIS & mainTXRIS )
\r
286 if( lTaskWaiting == pdTRUE )
\r
288 /* This interrupt was caused by space becoming available on the Tx
\r
289 FIFO, wake any task that is waiting to post (if any). */
\r
290 xSemaphoreGiveFromISR( xTxFIFOSemaphore, &xHigherPriorityTaskWoken );
\r
291 lTaskWaiting = pdFALSE;
\r
294 UART1->ICR = mainTXRIS;
\r
297 /* If a task was woken by either a character being received or a character
\r
298 being transmitted then we may need to switch to another task. */
\r
299 portEND_SWITCHING_ISR( xHigherPriorityTaskWoken );
\r