1 /* This source file is part of the ATMEL FREERTOS-0.9.0 Release */
\r
3 /*This file has been prepared for Doxygen automatic documentation generation.*/
\r
4 /*! \file *********************************************************************
\r
6 * \brief FreeRTOS Real Time Kernel example.
\r
8 * Creates all the demo application tasks, then starts the scheduler. The WEB
\r
9 * documentation provides more details of the demo application tasks.
\r
11 * Main. c also creates a task called "Check". This only executes every three
\r
12 * seconds but has the highest priority so is guaranteed to get processor time.
\r
13 * Its main function is to check that all the other tasks are still operational.
\r
14 * Each task that does not flash an LED maintains a unique count that is
\r
15 * incremented each time the task successfully completes its function. Should
\r
16 * any error occur within such a task the count is permanently halted. The
\r
17 * check task inspects the count of each task to ensure it has changed since
\r
18 * the last time the check task executed. If all the count variables have
\r
19 * changed all the tasks are still executing error free, and the check task
\r
20 * toggles an LED. Should any task contain an error at any time the LED toggle
\r
23 * The LED flash and communications test tasks do not maintain a count.
\r
25 * - Compiler: IAR EWAVR32 and GNU GCC for AVR32
\r
26 * - Supported devices: All AVR32 devices with GPIO.
\r
29 * \author Atmel Corporation: http://www.atmel.com \n
\r
30 * Support email: avr32@atmel.com
\r
32 *****************************************************************************/
\r
35 FreeRTOS.org V4.4.0 - Copyright (C) 2003-2007 Richard Barry.
\r
37 This file is part of the FreeRTOS.org distribution.
\r
39 FreeRTOS.org is free software; you can redistribute it and/or modify
\r
40 it under the terms of the GNU General Public License as published by
\r
41 the Free Software Foundation; either version 2 of the License, or
\r
42 (at your option) any later version.
\r
44 FreeRTOS.org is distributed in the hope that it will be useful,
\r
45 but WITHOUT ANY WARRANTY; without even the implied warranty of
\r
46 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
\r
47 GNU General Public License for more details.
\r
49 You should have received a copy of the GNU General Public License
\r
50 along with FreeRTOS.org; if not, write to the Free Software
\r
51 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
\r
53 A special exception to the GPL can be applied should you wish to distribute
\r
54 a combined work that includes FreeRTOS.org, without being obliged to provide
\r
55 the source code for any proprietary components. See the licensing section
\r
56 of http://www.FreeRTOS.org for full details of how and when the exception
\r
59 ***************************************************************************
\r
60 See http://www.FreeRTOS.org for documentation, latest information, license
\r
61 and contact details. Please ensure to read the configuration and relevant
\r
62 port sections of the online documentation.
\r
64 Also see http://www.SafeRTOS.com for an IEC 61508 compliant version along
\r
65 with commercial development and support options.
\r
66 ***************************************************************************
\r
74 /* Environment header files. */
\r
77 /* Scheduler header files. */
\r
78 #include "FreeRTOS.h"
\r
81 /* Demo file headers. */
\r
82 #include "partest.h"
\r
84 #include "integer.h"
\r
85 #include "comtest.h"
\r
88 #include "semtest.h"
\r
89 #include "dynamic.h"
\r
94 /*! \name Priority definitions for most of the tasks in the demo application.
\r
95 * Some tasks just use the idle priority.
\r
98 #define mainLED_TASK_PRIORITY ( tskIDLE_PRIORITY + 1 )
\r
99 #define mainCOM_TEST_PRIORITY ( tskIDLE_PRIORITY + 2 )
\r
100 #define mainQUEUE_POLL_PRIORITY ( tskIDLE_PRIORITY + 2 )
\r
101 #define mainSEM_TEST_PRIORITY ( tskIDLE_PRIORITY + 1 )
\r
102 #define mainBLOCK_Q_PRIORITY ( tskIDLE_PRIORITY + 3 )
\r
103 #define mainCHECK_TASK_PRIORITY ( tskIDLE_PRIORITY + 4 )
\r
104 #define mainCREATOR_TASK_PRIORITY ( tskIDLE_PRIORITY + 3 )
\r
107 //! Baud rate used by the serial port tasks.
\r
108 #define mainCOM_TEST_BAUD_RATE ( ( unsigned portLONG ) 57600 )
\r
110 //! LED used by the serial port tasks. This is toggled on each character Tx,
\r
111 //! and mainCOM_TEST_LED + 1 is toggled on each character Rx.
\r
112 #define mainCOM_TEST_LED ( 3 )
\r
114 //! LED that is toggled by the check task. The check task periodically checks
\r
115 //! that all the other tasks are operating without error. If no errors are found
\r
116 //! the LED is toggled. If an error is found at any time the LED toggles faster.
\r
117 #define mainCHECK_TASK_LED ( 6 )
\r
119 //! LED that is set upon error.
\r
120 #define mainERROR_LED ( 7 )
\r
122 //! The period between executions of the check task.
\r
123 #define mainCHECK_PERIOD ( ( portTickType ) 3000 / portTICK_RATE_MS )
\r
125 //! If an error is detected in a task, the vErrorChecks task will enter in an
\r
126 //! infinite loop flashing the LED at this rate.
\r
127 #define mainERROR_FLASH_RATE ( (portTickType) 500 / portTICK_RATE_MS )
\r
129 /*! \name Constants used by the vMemCheckTask() task.
\r
132 #define mainCOUNT_INITIAL_VALUE ( ( unsigned portLONG ) 0 )
\r
133 #define mainNO_TASK ( 0 )
\r
136 /*! \name The size of the memory blocks allocated by the vMemCheckTask() task.
\r
139 #define mainMEM_CHECK_SIZE_1 ( ( size_t ) 51 )
\r
140 #define mainMEM_CHECK_SIZE_2 ( ( size_t ) 52 )
\r
141 #define mainMEM_CHECK_SIZE_3 ( ( size_t ) 15 )
\r
145 /*-----------------------------------------------------------*/
\r
148 * The task that executes at the highest priority and calls
\r
149 * prvCheckOtherTasksAreStillRunning(). See the description at the top
\r
152 static void vErrorChecks( void *pvParameters );
\r
155 * Checks that all the demo application tasks are still executing without error
\r
156 * - as described at the top of the file.
\r
158 static portBASE_TYPE prvCheckOtherTasksAreStillRunning( void );
\r
161 * A task that exercises the memory allocator.
\r
163 static void vMemCheckTask( void *pvParameters );
\r
166 * Called by the check task following the detection of an error to set the
\r
167 * LEDs into a state that shows an error has beeen found.
\r
169 static void prvIndicateError( void );
\r
171 /*-----------------------------------------------------------*/
\r
175 /* Start the crystal oscillator 0 and switch the main clock to it. */
\r
176 pm_switch_to_osc0(&AVR32_PM, FOSC0, OSC0_STARTUP);
\r
178 portDBG_TRACE("Starting the FreeRTOS AVR32 UC3 Demo...");
\r
180 /* Setup the LED's for output. */
\r
181 vParTestInitialise();
\r
183 /* Start the standard demo tasks. See the WEB documentation for more
\r
185 vStartLEDFlashTasks( mainLED_TASK_PRIORITY );
\r
186 vAltStartComTestTasks( mainCOM_TEST_PRIORITY, mainCOM_TEST_BAUD_RATE, mainCOM_TEST_LED );
\r
187 vStartPolledQueueTasks( mainQUEUE_POLL_PRIORITY );
\r
188 vStartIntegerMathTasks( tskIDLE_PRIORITY );
\r
189 vStartSemaphoreTasks( mainSEM_TEST_PRIORITY );
\r
190 vStartDynamicPriorityTasks();
\r
191 vStartBlockingQueueTasks( mainBLOCK_Q_PRIORITY );
\r
192 vStartMathTasks( tskIDLE_PRIORITY );
\r
194 /* Start the demo tasks defined within this file, specifically the check
\r
195 task as described at the top of this file. */
\r
198 , (const signed portCHAR *)"ErrCheck"
\r
199 , configMINIMAL_STACK_SIZE
\r
201 , mainCHECK_TASK_PRIORITY
\r
204 /* Start the scheduler. */
\r
205 vTaskStartScheduler();
\r
207 /* Will only get here if there was insufficient memory to create the idle
\r
212 /*-----------------------------------------------------------*/
\r
215 * \brief The task function for the "Check" task.
\r
217 static void vErrorChecks( void *pvParameters )
\r
219 static volatile unsigned portLONG ulDummyVariable = 3UL;
\r
220 unsigned portLONG ulMemCheckTaskRunningCount;
\r
221 xTaskHandle xCreatedTask;
\r
222 portBASE_TYPE bSuicidalTask = 0;
\r
224 /* The parameters are not used. Prevent compiler warnings. */
\r
225 ( void ) pvParameters;
\r
227 /* Cycle for ever, delaying then checking all the other tasks are still
\r
228 operating without error.
\r
230 In addition to the standard tests the memory allocator is tested through
\r
231 the dynamic creation and deletion of a task each cycle. Each time the
\r
232 task is created memory must be allocated for its stack. When the task is
\r
233 deleted this memory is returned to the heap. If the task cannot be created
\r
234 then it is likely that the memory allocation failed. */
\r
238 /* Do this only once. */
\r
239 if( bSuicidalTask == 0 )
\r
243 /* This task has to be created last as it keeps account of the number of
\r
244 tasks it expects to see running. However its implementation expects
\r
245 to be called before vTaskStartScheduler(). We're in the case here where
\r
246 vTaskStartScheduler() has already been called (thus the hidden IDLE task
\r
247 has already been spawned). Since vCreateSuicidalTask() supposes that the
\r
248 IDLE task isn't included in the response from uxTaskGetNumberOfTasks(),
\r
249 let the MEM_CHECK task play that role. => this is why vCreateSuicidalTasks()
\r
250 is not called as the last task. */
\r
251 vCreateSuicidalTasks( mainCREATOR_TASK_PRIORITY );
\r
254 /* Reset xCreatedTask. This is modified by the task about to be
\r
255 created so we can tell if it is executing correctly or not. */
\r
256 xCreatedTask = mainNO_TASK;
\r
258 /* Dynamically create a task - passing ulMemCheckTaskRunningCount as a
\r
260 ulMemCheckTaskRunningCount = mainCOUNT_INITIAL_VALUE;
\r
262 if( xTaskCreate( vMemCheckTask,
\r
263 ( signed portCHAR * ) "MEM_CHECK",
\r
264 configMINIMAL_STACK_SIZE,
\r
265 ( void * ) &ulMemCheckTaskRunningCount,
\r
266 tskIDLE_PRIORITY, &xCreatedTask ) != pdPASS )
\r
268 /* Could not create the task - we have probably run out of heap.
\r
269 Don't go any further and flash the LED faster to provide visual
\r
270 feedback of the error. */
\r
271 prvIndicateError();
\r
274 /* Delay until it is time to execute again. */
\r
275 vTaskDelay( mainCHECK_PERIOD );
\r
277 /* Delete the dynamically created task. */
\r
278 if( xCreatedTask != mainNO_TASK )
\r
280 vTaskDelete( xCreatedTask );
\r
283 /* Perform a bit of 32bit maths to ensure the registers used by the
\r
284 integer tasks get some exercise. The result here is not important -
\r
285 see the demo application documentation for more info. */
\r
286 ulDummyVariable *= 3;
\r
288 /* Check all other tasks are still operating without error.
\r
289 Check that vMemCheckTask did increment the counter. */
\r
290 if( ( prvCheckOtherTasksAreStillRunning() != pdFALSE )
\r
291 || ( ulMemCheckTaskRunningCount == mainCOUNT_INITIAL_VALUE ) )
\r
293 /* An error has occurred in one of the tasks.
\r
294 Don't go any further and flash the LED faster to give visual
\r
295 feedback of the error. */
\r
296 prvIndicateError();
\r
300 /* Toggle the LED if everything is okay. */
\r
301 vParTestToggleLED( mainCHECK_TASK_LED );
\r
305 /*-----------------------------------------------------------*/
\r
309 * \brief Checks that all the demo application tasks are still executing without error.
\r
311 static portBASE_TYPE prvCheckOtherTasksAreStillRunning( void )
\r
313 static portBASE_TYPE xErrorHasOccurred = pdFALSE;
\r
315 if( xAreComTestTasksStillRunning() != pdTRUE )
\r
317 xErrorHasOccurred = pdTRUE;
\r
320 if( xArePollingQueuesStillRunning() != pdTRUE )
\r
322 xErrorHasOccurred = pdTRUE;
\r
325 if( xAreIntegerMathsTaskStillRunning() != pdTRUE )
\r
327 xErrorHasOccurred = pdTRUE;
\r
330 if( xAreSemaphoreTasksStillRunning() != pdTRUE )
\r
332 xErrorHasOccurred = pdTRUE;
\r
335 if( xAreBlockingQueuesStillRunning() != pdTRUE )
\r
337 xErrorHasOccurred = pdTRUE;
\r
340 if( xAreDynamicPriorityTasksStillRunning() != pdTRUE )
\r
342 xErrorHasOccurred = pdTRUE;
\r
345 if( xAreMathsTaskStillRunning() != pdTRUE )
\r
347 xErrorHasOccurred = pdTRUE;
\r
350 if( xIsCreateTaskStillRunning() != pdTRUE )
\r
352 xErrorHasOccurred = pdTRUE;
\r
355 return ( xErrorHasOccurred );
\r
357 /*-----------------------------------------------------------*/
\r
361 * \brief Dynamically created and deleted during each cycle of the vErrorChecks()
\r
362 * task. This is done to check the operation of the memory allocator.
\r
363 * See the top of vErrorChecks for more details.
\r
365 * \param *pvParameters Parameters for the task (can be of any kind)
\r
367 static void vMemCheckTask( void *pvParameters )
\r
369 unsigned portLONG *pulMemCheckTaskRunningCounter;
\r
370 void *pvMem1, *pvMem2, *pvMem3;
\r
371 static portLONG lErrorOccurred = pdFALSE;
\r
373 /* This task is dynamically created then deleted during each cycle of the
\r
374 vErrorChecks task to check the operation of the memory allocator. Each time
\r
375 the task is created memory is allocated for the stack and TCB. Each time
\r
376 the task is deleted this memory is returned to the heap. This task itself
\r
377 exercises the allocator by allocating and freeing blocks.
\r
379 The task executes at the idle priority so does not require a delay.
\r
381 pulMemCheckTaskRunningCounter is incremented each cycle to indicate to the
\r
382 vErrorChecks() task that this task is still executing without error. */
\r
384 pulMemCheckTaskRunningCounter = ( unsigned portLONG * ) pvParameters;
\r
388 if( lErrorOccurred == pdFALSE )
\r
390 /* We have never seen an error so increment the counter. */
\r
391 ( *pulMemCheckTaskRunningCounter )++;
\r
395 /* There has been an error so reset the counter so the check task
\r
396 can tell that an error occurred. */
\r
397 *pulMemCheckTaskRunningCounter = mainCOUNT_INITIAL_VALUE;
\r
400 /* Allocate some memory - just to give the allocator some extra
\r
401 exercise. This has to be in a critical section to ensure the
\r
402 task does not get deleted while it has memory allocated. */
\r
406 pvMem1 = pvPortMalloc( mainMEM_CHECK_SIZE_1 );
\r
408 if( pvMem1 == NULL )
\r
410 lErrorOccurred = pdTRUE;
\r
414 memset( pvMem1, 0xaa, mainMEM_CHECK_SIZE_1 );
\r
415 vPortFree( pvMem1 );
\r
420 /* Again - with a different size block. */
\r
423 pvMem2 = pvPortMalloc( mainMEM_CHECK_SIZE_2 );
\r
425 if( pvMem2 == NULL )
\r
427 lErrorOccurred = pdTRUE;
\r
431 memset( pvMem2, 0xaa, mainMEM_CHECK_SIZE_2 );
\r
432 vPortFree( pvMem2 );
\r
437 /* Again - with a different size block. */
\r
440 pvMem3 = pvPortMalloc( mainMEM_CHECK_SIZE_3 );
\r
441 if( pvMem3 == NULL )
\r
443 lErrorOccurred = pdTRUE;
\r
447 memset( pvMem3, 0xaa, mainMEM_CHECK_SIZE_3 );
\r
448 vPortFree( pvMem3 );
\r
454 /*-----------------------------------------------------------*/
\r
456 static void prvIndicateError( void )
\r
458 /* The check task has found an error in one of the other tasks.
\r
459 Set the LEDs to a state that indicates this. */
\r
460 vParTestSetLED(mainERROR_LED,pdTRUE);
\r
464 #if( BOARD==EVK1100 )
\r
465 vParTestToggleLED( mainCHECK_TASK_LED );
\r
466 vTaskDelay( mainERROR_FLASH_RATE );
\r
468 #if ( BOARD==EVK1101 )
\r
469 vParTestSetLED( 0, pdTRUE );
\r
470 vParTestSetLED( 1, pdTRUE );
\r
471 vParTestSetLED( 2, pdTRUE );
\r
472 vParTestSetLED( 3, pdTRUE );
\r