2 FreeRTOS.org V4.7.0 - Copyright (C) 2003-2007 Richard Barry.
\r
4 This file is part of the FreeRTOS.org distribution.
\r
6 FreeRTOS.org is free software; you can redistribute it and/or modify
\r
7 it under the terms of the GNU General Public License as published by
\r
8 the Free Software Foundation; either version 2 of the License, or
\r
9 (at your option) any later version.
\r
11 FreeRTOS.org is distributed in the hope that it will be useful,
\r
12 but WITHOUT ANY WARRANTY; without even the implied warranty of
\r
13 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
\r
14 GNU General Public License for more details.
\r
16 You should have received a copy of the GNU General Public License
\r
17 along with FreeRTOS.org; if not, write to the Free Software
\r
18 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
\r
20 A special exception to the GPL can be applied should you wish to distribute
\r
21 a combined work that includes FreeRTOS.org, without being obliged to provide
\r
22 the source code for any proprietary components. See the licensing section
\r
23 of http://www.FreeRTOS.org for full details of how and when the exception
\r
26 ***************************************************************************
\r
27 See http://www.FreeRTOS.org for documentation, latest information, license
\r
28 and contact details. Please ensure to read the configuration and relevant
\r
29 port sections of the online documentation.
\r
31 Also see http://www.SafeRTOS.com a version that has been certified for use
\r
32 in safety critical systems, plus commercial licensing, development and
\r
34 ***************************************************************************
\r
40 + The function xPortInitMinimal() has been renamed to
\r
41 xSerialPortInitMinimal() and the function xPortInit() has been renamed
\r
42 to xSerialPortInit().
\r
46 + Delay periods are now specified using variables and constants of
\r
47 portTickType rather than unsigned portLONG.
\r
48 + xQueueReceiveFromISR() used in place of xQueueReceive() within the ISR.
\r
52 + Replaced the inb() and outb() functions with direct memory
\r
53 access. This allows the port to be built with the 20050414 build of
\r
57 /* BASIC INTERRUPT DRIVEN SERIAL PORT DRIVER. */
\r
61 #include <avr/interrupt.h>
\r
62 #include "FreeRTOS.h"
\r
67 #define serBAUD_DIV_CONSTANT ( ( unsigned portLONG ) 16 )
\r
69 /* Constants for writing to UCSRB. */
\r
70 #define serRX_INT_ENABLE ( ( unsigned portCHAR ) 0x80 )
\r
71 #define serRX_ENABLE ( ( unsigned portCHAR ) 0x10 )
\r
72 #define serTX_ENABLE ( ( unsigned portCHAR ) 0x08 )
\r
73 #define serTX_INT_ENABLE ( ( unsigned portCHAR ) 0x20 )
\r
75 /* Constants for writing to UCSRC. */
\r
76 #define serUCSRC_SELECT ( ( unsigned portCHAR ) 0x80 )
\r
77 #define serEIGHT_DATA_BITS ( ( unsigned portCHAR ) 0x06 )
\r
79 static xQueueHandle xRxedChars;
\r
80 static xQueueHandle xCharsForTx;
\r
82 #define vInterruptOn() \
\r
84 unsigned portCHAR ucByte; \
\r
87 ucByte |= serTX_INT_ENABLE; \
\r
90 /*-----------------------------------------------------------*/
\r
92 #define vInterruptOff() \
\r
94 unsigned portCHAR ucInByte; \
\r
97 ucInByte &= ~serTX_INT_ENABLE; \
\r
100 /*-----------------------------------------------------------*/
\r
102 xComPortHandle xSerialPortInitMinimal( unsigned portLONG ulWantedBaud, unsigned portBASE_TYPE uxQueueLength )
\r
104 unsigned portLONG ulBaudRateCounter;
\r
105 unsigned portCHAR ucByte;
\r
107 portENTER_CRITICAL();
\r
109 /* Create the queues used by the com test task. */
\r
110 xRxedChars = xQueueCreate( uxQueueLength, ( unsigned portBASE_TYPE ) sizeof( signed portCHAR ) );
\r
111 xCharsForTx = xQueueCreate( uxQueueLength, ( unsigned portBASE_TYPE ) sizeof( signed portCHAR ) );
\r
113 /* Calculate the baud rate register value from the equation in the
\r
115 ulBaudRateCounter = ( configCPU_CLOCK_HZ / ( serBAUD_DIV_CONSTANT * ulWantedBaud ) ) - ( unsigned portLONG ) 1;
\r
117 /* Set the baud rate. */
\r
118 ucByte = ( unsigned portCHAR ) ( ulBaudRateCounter & ( unsigned portLONG ) 0xff );
\r
121 ulBaudRateCounter >>= ( unsigned portLONG ) 8;
\r
122 ucByte = ( unsigned portCHAR ) ( ulBaudRateCounter & ( unsigned portLONG ) 0xff );
\r
125 /* Enable the Rx interrupt. The Tx interrupt will get enabled
\r
126 later. Also enable the Rx and Tx. */
\r
127 UCSRB = ( serRX_INT_ENABLE | serRX_ENABLE | serTX_ENABLE );
\r
129 /* Set the data bits to 8. */
\r
130 UCSRC = ( serUCSRC_SELECT | serEIGHT_DATA_BITS );
\r
132 portEXIT_CRITICAL();
\r
134 /* Unlike other ports, this serial code does not allow for more than one
\r
135 com port. We therefore don't return a pointer to a port structure and can
\r
136 instead just return NULL. */
\r
139 /*-----------------------------------------------------------*/
\r
141 signed portBASE_TYPE xSerialGetChar( xComPortHandle pxPort, signed portCHAR *pcRxedChar, portTickType xBlockTime )
\r
143 /* Only one port is supported. */
\r
146 /* Get the next character from the buffer. Return false if no characters
\r
147 are available, or arrive before xBlockTime expires. */
\r
148 if( xQueueReceive( xRxedChars, pcRxedChar, xBlockTime ) )
\r
157 /*-----------------------------------------------------------*/
\r
159 signed portBASE_TYPE xSerialPutChar( xComPortHandle pxPort, signed portCHAR cOutChar, portTickType xBlockTime )
\r
161 /* Only one port is supported. */
\r
164 /* Return false if after the block time there is no room on the Tx queue. */
\r
165 if( xQueueSend( xCharsForTx, &cOutChar, xBlockTime ) != pdPASS )
\r
174 /*-----------------------------------------------------------*/
\r
176 void vSerialClose( xComPortHandle xPort )
\r
178 unsigned portCHAR ucByte;
\r
180 /* The parameter is not used. */
\r
183 /* Turn off the interrupts. We may also want to delete the queues and/or
\r
184 re-install the original ISR. */
\r
186 portENTER_CRITICAL();
\r
190 ucByte &= ~serRX_INT_ENABLE;
\r
193 portEXIT_CRITICAL();
\r
195 /*-----------------------------------------------------------*/
\r
197 SIGNAL( SIG_UART_RECV )
\r
199 signed portCHAR cChar;
\r
201 /* Get the character and post it on the queue of Rxed characters.
\r
202 If the post causes a task to wake force a context switch as the woken task
\r
203 may have a higher priority than the task we have interrupted. */
\r
206 if( xQueueSendFromISR( xRxedChars, &cChar, pdFALSE ) )
\r
211 /*-----------------------------------------------------------*/
\r
213 SIGNAL( SIG_UART_DATA )
\r
215 signed portCHAR cChar, cTaskWoken;
\r
217 if( xQueueReceiveFromISR( xCharsForTx, &cChar, &cTaskWoken ) == pdTRUE )
\r
219 /* Send the next character queued for Tx. */
\r
224 /* Queue empty, nothing to send. */
\r