2 FreeRTOS V6.0.3 - Copyright (C) 2010 Real Time Engineers Ltd.
\r
4 ***************************************************************************
\r
8 * + New to FreeRTOS, *
\r
9 * + Wanting to learn FreeRTOS or multitasking in general quickly *
\r
10 * + Looking for basic training, *
\r
11 * + Wanting to improve your FreeRTOS skills and productivity *
\r
13 * then take a look at the FreeRTOS eBook *
\r
15 * "Using the FreeRTOS Real Time Kernel - a Practical Guide" *
\r
16 * http://www.FreeRTOS.org/Documentation *
\r
18 * A pdf reference manual is also available. Both are usually delivered *
\r
19 * to your inbox within 20 minutes to two hours when purchased between 8am *
\r
20 * and 8pm GMT (although please allow up to 24 hours in case of *
\r
21 * exceptional circumstances). Thank you for your support! *
\r
23 ***************************************************************************
\r
25 This file is part of the FreeRTOS distribution.
\r
27 FreeRTOS is free software; you can redistribute it and/or modify it under
\r
28 the terms of the GNU General Public License (version 2) as published by the
\r
29 Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
\r
30 ***NOTE*** The exception to the GPL is included to allow you to distribute
\r
31 a combined work that includes FreeRTOS without being obliged to provide the
\r
32 source code for proprietary components outside of the FreeRTOS kernel.
\r
33 FreeRTOS is distributed in the hope that it will be useful, but WITHOUT
\r
34 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
\r
35 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
\r
36 more details. You should have received a copy of the GNU General Public
\r
37 License and the FreeRTOS license exception along with FreeRTOS; if not it
\r
38 can be viewed here: http://www.freertos.org/a00114.html and also obtained
\r
39 by writing to Richard Barry, contact details for whom are available on the
\r
44 http://www.FreeRTOS.org - Documentation, latest information, license and
\r
47 http://www.SafeRTOS.com - A version that is certified for use in safety
\r
50 http://www.OpenRTOS.com - Commercial support, development, porting,
\r
51 licensing and training services.
\r
55 * This demo application creates six co-routines and two tasks (three including
\r
56 * the idle task). The co-routines execute as part of the idle task hook.
\r
58 * Five of the created co-routines are the standard 'co-routine flash'
\r
59 * co-routines contained within the Demo/Common/Minimal/crflash.c file and
\r
60 * documented on the FreeRTOS.org WEB site.
\r
62 * The 'LCD Task' rotates a string on the LCD, delaying between each character
\r
63 * as necessitated by the slow interface, and delaying between each string just
\r
64 * long enough to enable the text to be read.
\r
66 * The sixth co-routine and final task control the transmission and reception
\r
67 * of a string to UART 0. The co-routine periodically sends the first
\r
68 * character of the string to the UART, with the UART's TxEnd interrupt being
\r
69 * used to transmit the remaining characters. The UART's RxEnd interrupt
\r
70 * receives the characters and places them on a queue to be processed by the
\r
71 * 'COMs Rx' task. An error is latched should an unexpected character be
\r
72 * received, or any character be received out of sequence.
\r
74 * A loopback connector is required to ensure that each character transmitted
\r
75 * on the UART is also received on the same UART. For test purposes the UART
\r
76 * FIFO's are not utalised in order to maximise the interrupt overhead. Also
\r
77 * a pseudo random interval is used between the start of each transmission in
\r
78 * order that the resultant interrupts are more randomly distributed and
\r
79 * therefore more likely to highlight any problems.
\r
81 * The flash co-routines control LED's zero to four. LED five is toggled each
\r
82 * time the string is transmitted on the UART. LED six is toggled each time
\r
83 * the string is CORRECTLY received on the UART. LED seven is latched on should
\r
84 * an error be detected in any task or co-routine.
\r
86 * In addition the idle task makes repetative calls to
\r
87 * prvSetAndCheckRegisters(). This simply loads the general purpose registers
\r
88 * with a known value, then checks each register to ensure the held value is
\r
89 * still correct. As a low priority task this checking routine is likely to
\r
90 * get repeatedly swapped in and out. A register being found to contain an
\r
91 * incorrect value is therefore indicative of an error in the task switching
\r
96 /* Scheduler include files. */
\r
97 #include "FreeRTOS.h"
\r
100 #include "croutine.h"
\r
102 /* Demo application include files. */
\r
103 #include "partest.h"
\r
104 #include "crflash.h"
\r
106 /* Library include files. */
\r
107 #include "LM3Sxxx.h"
\r
110 /* The time to delay between writing each character to the LCD. */
\r
111 #define mainCHAR_WRITE_DELAY ( 2 / portTICK_RATE_MS )
\r
113 /* The time to delay between writing each string to the LCD. */
\r
114 #define mainSTRING_WRITE_DELAY ( 400 / portTICK_RATE_MS )
\r
116 /* The number of flash co-routines to create. */
\r
117 #define mainNUM_FLASH_CO_ROUTINES ( 5 )
\r
119 /* The length of the queue used to pass received characters to the Comms Rx
\r
121 #define mainRX_QUEUE_LEN ( 5 )
\r
123 /* The priority of the co-routine used to initiate the transmission of the
\r
124 string on UART 0. */
\r
125 #define mainTX_CO_ROUTINE_PRIORITY ( 1 )
\r
127 /* Only one co-routine is created so its index is not important. */
\r
128 #define mainTX_CO_ROUTINE_INDEX ( 0 )
\r
130 /* The time between transmissions of the string on UART 0. This is pseudo
\r
131 random in order to generate a bit or randomness to when the interrupts occur.*/
\r
132 #define mainMIN_TX_DELAY ( 40 / portTICK_RATE_MS )
\r
133 #define mainMAX_TX_DELAY ( ( portTickType ) 0x7f )
\r
134 #define mainOFFSET_TIME ( ( portTickType ) 3 )
\r
136 /* The time the Comms Rx task should wait to receive a character. This should
\r
137 be slightly longer than the time between transmissions. If we do not receive
\r
138 a character after this time then there must be an error in the transmission or
\r
139 the timing of the transmission. */
\r
140 #define mainCOMMS_RX_DELAY ( mainMAX_TX_DELAY + 20 )
\r
142 /* The task priorites. */
\r
143 #define mainLCD_TASK_PRIORITY ( tskIDLE_PRIORITY )
\r
144 #define mainCOMMS_RX_TASK_PRIORITY ( tskIDLE_PRIORITY + 1 )
\r
146 /* The LED's toggled by the various tasks. */
\r
147 #define mainCOMMS_FAIL_LED ( 7 )
\r
148 #define mainCOMMS_RX_LED ( 6 )
\r
149 #define mainCOMMS_TX_LED ( 5 )
\r
151 /* The baud rate used by the UART comms tasks/co-routine. */
\r
152 #define mainBAUD_RATE ( 57600 )
\r
154 /* FIFO setting for the UART. The FIFO is not used to create a better test. */
\r
155 #define mainFIFO_SET ( 0x10 )
\r
157 /* The string that is transmitted on the UART contains sequentially the
\r
158 characters from mainFIRST_TX_CHAR to mainLAST_TX_CHAR. */
\r
159 #define mainFIRST_TX_CHAR '0'
\r
160 #define mainLAST_TX_CHAR 'z'
\r
162 /* Just used to walk through the program memory in order that some random data
\r
163 can be generated. */
\r
164 #define mainTOTAL_PROGRAM_MEMORY ( ( unsigned long * ) ( 8 * 1024 ) )
\r
165 #define mainFIRST_PROGRAM_BYTES ( ( unsigned long * ) 4 )
\r
167 /*-----------------------------------------------------------*/
\r
170 * The task that rotates text on the LCD.
\r
172 static void vLCDTask( void * pvParameters );
\r
175 * The task that receives the characters from UART 0.
\r
177 static void vCommsRxTask( void * pvParameters );
\r
180 * The co-routine that periodically initiates the transmission of the string on
\r
183 static void vSerialTxCoRoutine( xCoRoutineHandle xHandle, unsigned portBASE_TYPE uxIndex );
\r
186 * Writes a string the the LCD.
\r
188 static void prvWriteString( const char *pcString );
\r
191 * Initialisation routine for the UART.
\r
193 static void vSerialInit( void );
\r
196 * Thread safe write to the PDC.
\r
198 static void prvPDCWrite( char cAddress, char cData );
\r
201 * Function to simply set a known value into the general purpose registers
\r
202 * then read them back to ensure they remain set correctly. An incorrect value
\r
203 * being indicative of an error in the task switching mechanism.
\r
205 void prvSetAndCheckRegisters( void );
\r
208 * Latch the LED that indicates that an error has occurred.
\r
210 void vSetErrorLED( void );
\r
213 * Sets up the PLL and ports used by the demo.
\r
215 static void prvSetupHardware( void );
\r
217 /*-----------------------------------------------------------*/
\r
219 /* Error flag set to pdFAIL if an error is encountered in the tasks/co-routines
\r
220 defined within this file. */
\r
221 unsigned portBASE_TYPE uxErrorStatus = pdPASS;
\r
223 /* The next character to transmit. */
\r
224 static char cNextChar;
\r
226 /* The queue used to transmit characters from the interrupt to the Comms Rx
\r
228 static xQueueHandle xCommsQueue;
\r
230 /*-----------------------------------------------------------*/
\r
234 /* Create the queue used to communicate between the UART ISR and the Comms
\r
236 xCommsQueue = xQueueCreate( mainRX_QUEUE_LEN, sizeof( char ) );
\r
238 /* Setup the ports used by the demo and the clock. */
\r
239 prvSetupHardware();
\r
241 /* Create the co-routines that flash the LED's. */
\r
242 vStartFlashCoRoutines( mainNUM_FLASH_CO_ROUTINES );
\r
244 /* Create the co-routine that initiates the transmission of characters
\r
246 xCoRoutineCreate( vSerialTxCoRoutine, mainTX_CO_ROUTINE_PRIORITY, mainTX_CO_ROUTINE_INDEX );
\r
248 /* Create the LCD and Comms Rx tasks. */
\r
249 xTaskCreate( vLCDTask, "LCD", configMINIMAL_STACK_SIZE, NULL, mainLCD_TASK_PRIORITY, NULL );
\r
250 xTaskCreate( vCommsRxTask, "CMS", configMINIMAL_STACK_SIZE, NULL, mainCOMMS_RX_TASK_PRIORITY, NULL );
\r
252 /* Start the scheduler running the tasks and co-routines just created. */
\r
253 vTaskStartScheduler();
\r
255 /* Should not get here unless we did not have enough memory to start the
\r
259 /*-----------------------------------------------------------*/
\r
261 static void prvSetupHardware( void )
\r
263 /* Setup the PLL. */
\r
264 SysCtlClockSet( SYSCTL_SYSDIV_10 | SYSCTL_USE_PLL | SYSCTL_OSC_MAIN | SYSCTL_XTAL_6MHZ );
\r
266 /* Initialise the hardware used to talk to the LCD, LED's and UART. */
\r
268 vParTestInitialise();
\r
271 /*-----------------------------------------------------------*/
\r
273 void vApplicationIdleHook( void )
\r
275 /* The co-routines are executed in the idle task using the idle task
\r
279 /* Schedule the co-routines. */
\r
280 vCoRoutineSchedule();
\r
282 /* Run the register check function between each co-routine. */
\r
283 prvSetAndCheckRegisters();
\r
286 /*-----------------------------------------------------------*/
\r
288 static void prvWriteString( const char *pcString )
\r
290 /* Write pcString to the LED, pausing between each character. */
\r
291 prvPDCWrite(PDC_LCD_CSR, LCD_CLEAR);
\r
294 vTaskDelay( mainCHAR_WRITE_DELAY );
\r
295 prvPDCWrite( PDC_LCD_RAM, *pcString );
\r
299 /*-----------------------------------------------------------*/
\r
301 void vLCDTask( void * pvParameters )
\r
303 unsigned portBASE_TYPE uxIndex;
\r
304 const unsigned char ucCFGData[] = {
\r
305 0x30, /* Set data bus to 8-bits. */
\r
308 0x3C, /* Number of lines/font. */
\r
309 0x08, /* Display off. */
\r
310 0x01, /* Display clear. */
\r
311 0x06, /* Entry mode [cursor dir][shift]. */
\r
312 0x0C /* Display on [display on][curson on][blinking on]. */
\r
315 /* The strings that are written to the LCD. */
\r
316 const char *pcStringsToDisplay[] = {
\r
320 "www.FreeRTOS.org",
\r
324 /* Configure the LCD. */
\r
326 while( uxIndex < sizeof( ucCFGData ) )
\r
328 prvPDCWrite( PDC_LCD_CSR, ucCFGData[ uxIndex ] );
\r
330 vTaskDelay( mainCHAR_WRITE_DELAY );
\r
333 /* Turn the LCD Backlight on. */
\r
334 prvPDCWrite( PDC_CSR, 0x01 );
\r
336 /* Clear display. */
\r
337 vTaskDelay( mainCHAR_WRITE_DELAY );
\r
338 prvPDCWrite( PDC_LCD_CSR, LCD_CLEAR );
\r
343 /* Display the string on the LCD. */
\r
344 prvWriteString( pcStringsToDisplay[ uxIndex ] );
\r
346 /* Move on to the next string - wrapping if necessary. */
\r
348 if( *( pcStringsToDisplay[ uxIndex ] ) == 0x00 )
\r
351 /* Longer pause on the last string to be sent. */
\r
352 vTaskDelay( mainSTRING_WRITE_DELAY * 2 );
\r
355 /* Wait until it is time to move onto the next string. */
\r
356 vTaskDelay( mainSTRING_WRITE_DELAY );
\r
359 /*-----------------------------------------------------------*/
\r
361 static void vCommsRxTask( void * pvParameters )
\r
363 static char cRxedChar, cExpectedChar;
\r
365 /* Set the char we expect to receive to the start of the string. */
\r
366 cExpectedChar = mainFIRST_TX_CHAR;
\r
370 /* Wait for a character to be received. */
\r
371 xQueueReceive( xCommsQueue, ( void * ) &cRxedChar, mainCOMMS_RX_DELAY );
\r
373 /* Was the character recived (if any) the expected character. */
\r
374 if( cRxedChar != cExpectedChar )
\r
376 /* Got an unexpected character. This can sometimes occur when
\r
377 reseting the system using the debugger leaving characters already
\r
378 in the UART regsters. */
\r
379 uxErrorStatus = pdFAIL;
\r
381 /* Resync by waiting for the end of the current string. */
\r
382 while( cRxedChar != mainLAST_TX_CHAR )
\r
384 while( !xQueueReceive( xCommsQueue, ( void * ) &cRxedChar, portMAX_DELAY ) );
\r
387 /* The next expected character is the start of the string again. */
\r
388 cExpectedChar = mainFIRST_TX_CHAR;
\r
392 if( cExpectedChar == mainLAST_TX_CHAR )
\r
394 /* We have reached the end of the string - we now expect to
\r
395 receive the first character in the string again. The LED is
\r
396 toggled to indicate that the entire string was received without
\r
398 vParTestToggleLED( mainCOMMS_RX_LED );
\r
399 cExpectedChar = mainFIRST_TX_CHAR;
\r
403 /* We got the expected character, we now expect to receive the
\r
404 next character in the string. */
\r
410 /*-----------------------------------------------------------*/
\r
412 static void vSerialTxCoRoutine( xCoRoutineHandle xHandle, unsigned portBASE_TYPE uxIndex )
\r
414 portTickType xDelayPeriod;
\r
415 static unsigned long *pulRandomBytes = mainFIRST_PROGRAM_BYTES;
\r
417 /* Co-routine MUST start with a call to crSTART. */
\r
418 crSTART( xHandle );
\r
422 /* Was the previously transmitted string received correctly? */
\r
423 if( uxErrorStatus != pdPASS )
\r
425 /* An error was encountered so set the error LED. */
\r
429 /* The next character to Tx is the first in the string. */
\r
430 cNextChar = mainFIRST_TX_CHAR;
\r
432 UARTIntDisable( UART0_BASE, UART_INT_TX );
\r
434 /* Send the first character. */
\r
435 if( !( HWREG( UART0_BASE + UART_O_FR ) & UART_FR_TXFF ) )
\r
437 HWREG( UART0_BASE + UART_O_DR ) = cNextChar;
\r
440 /* Move the variable to the char to Tx on so the ISR transmits
\r
441 the next character in the string once this one has completed. */
\r
444 UARTIntEnable(UART0_BASE, UART_INT_TX);
\r
446 /* Toggle the LED to show a new string is being transmitted. */
\r
447 vParTestToggleLED( mainCOMMS_TX_LED );
\r
449 /* Delay before we start the string off again. A pseudo-random delay
\r
450 is used as this will provide a better test. */
\r
451 xDelayPeriod = xTaskGetTickCount() + ( *pulRandomBytes );
\r
454 if( pulRandomBytes > mainTOTAL_PROGRAM_MEMORY )
\r
456 pulRandomBytes = mainFIRST_PROGRAM_BYTES;
\r
459 /* Make sure we don't wait too long... */
\r
460 xDelayPeriod &= mainMAX_TX_DELAY;
\r
462 /* ...but we do want to wait. */
\r
463 if( xDelayPeriod < mainMIN_TX_DELAY )
\r
465 xDelayPeriod = mainMIN_TX_DELAY;
\r
468 /* Block for the random(ish) time. */
\r
469 crDELAY( xHandle, xDelayPeriod );
\r
472 /* Co-routine MUST end with a call to crEND. */
\r
475 /*-----------------------------------------------------------*/
\r
477 static void vSerialInit( void )
\r
479 /* Enable the UART. GPIOA has already been initialised. */
\r
480 SysCtlPeripheralEnable(SYSCTL_PERIPH_UART0);
\r
482 /* Set GPIO A0 and A1 as peripheral function. They are used to output the
\r
484 GPIODirModeSet( GPIO_PORTA_BASE, GPIO_PIN_0 | GPIO_PIN_1, GPIO_DIR_MODE_HW );
\r
486 /* Configure the UART for 8-N-1 operation. */
\r
487 UARTConfigSet( UART0_BASE, mainBAUD_RATE, UART_CONFIG_WLEN_8 | UART_CONFIG_PAR_NONE | UART_CONFIG_STOP_ONE );
\r
489 /* We dont want to use the fifo. This is for test purposes to generate
\r
490 as many interrupts as possible. */
\r
491 HWREG( UART0_BASE + UART_O_LCR_H ) &= ~mainFIFO_SET;
\r
493 /* Enable both Rx and Tx interrupts. */
\r
494 HWREG( UART0_BASE + UART_O_IM ) |= ( UART_INT_TX | UART_INT_RX );
\r
495 IntEnable( INT_UART0 );
\r
497 /*-----------------------------------------------------------*/
\r
499 void vUART_ISR(void)
\r
501 unsigned long ulStatus;
\r
503 portBASE_TYPE xHigherPriorityTaskWoken = pdFALSE;
\r
505 /* What caused the interrupt. */
\r
506 ulStatus = UARTIntStatus( UART0_BASE, pdTRUE );
\r
508 /* Clear the interrupt. */
\r
509 UARTIntClear( UART0_BASE, ulStatus );
\r
511 /* Was an Rx interrpt pending? */
\r
512 if( ulStatus & UART_INT_RX )
\r
514 if( ( HWREG(UART0_BASE + UART_O_FR ) & UART_FR_RXFF ) )
\r
516 /* Get the char from the buffer and post it onto the queue of
\r
517 Rxed chars. Posting the character should wake the task that is
\r
518 blocked on the queue waiting for characters. */
\r
519 cRxedChar = ( char ) HWREG( UART0_BASE + UART_O_DR );
\r
520 xQueueSendFromISR( xCommsQueue, &cRxedChar, &xHigherPriorityTaskWoken );
\r
524 /* Was a Tx interrupt pending? */
\r
525 if( ulStatus & UART_INT_TX )
\r
527 /* Send the next character in the string. We are not using the FIFO. */
\r
528 if( cNextChar <= mainLAST_TX_CHAR )
\r
530 if( !( HWREG( UART0_BASE + UART_O_FR ) & UART_FR_TXFF ) )
\r
532 HWREG( UART0_BASE + UART_O_DR ) = cNextChar;
\r
538 /* If a task was woken by the character being received then we force
\r
539 a context switch to occur in case the task is of higher priority than
\r
540 the currently executing task (i.e. the task that this interrupt
\r
542 portEND_SWITCHING_ISR( xHigherPriorityTaskWoken );
\r
544 /*-----------------------------------------------------------*/
\r
546 static void prvPDCWrite( char cAddress, char cData )
\r
550 PDCWrite( cAddress, cData );
\r
554 /*-----------------------------------------------------------*/
\r
556 void vSetErrorLED( void )
\r
558 vParTestSetLED( mainCOMMS_FAIL_LED, pdTRUE );
\r
560 /*-----------------------------------------------------------*/
\r
562 __asm void prvSetAndCheckRegisters( void )
\r
564 extern vSetErrorLED
\r
566 /* Fill the general purpose registers with known values. */
\r
581 /* Check the values are as expected. */
\r
612 ldr r1, =vSetErrorLED
\r
617 /*-----------------------------------------------------------*/
\r