2 FreeRTOS.org V4.0.5 - Copyright (C) 2003-2006 Richard Barry.
\r
4 This file is part of the FreeRTOS.org distribution.
\r
6 FreeRTOS.org is free software; you can redistribute it and/or modify
\r
7 it under the terms of the GNU General Public License as published by
\r
8 the Free Software Foundation; either version 2 of the License, or
\r
9 (at your option) any later version.
\r
11 FreeRTOS.org is distributed in the hope that it will be useful,
\r
12 but WITHOUT ANY WARRANTY; without even the implied warranty of
\r
13 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
\r
14 GNU General Public License for more details.
\r
16 You should have received a copy of the GNU General Public License
\r
17 along with FreeRTOS.org; if not, write to the Free Software
\r
18 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
\r
20 A special exception to the GPL can be applied should you wish to distribute
\r
21 a combined work that includes FreeRTOS.org, without being obliged to provide
\r
22 the source code for any proprietary components. See the licensing section
\r
23 of http://www.FreeRTOS.org for full details of how and when the exception
\r
26 ***************************************************************************
\r
27 See http://www.FreeRTOS.org for documentation, latest information, license
\r
28 and contact details. Please ensure to read the configuration and relevant
\r
29 port sections of the online documentation.
\r
30 ***************************************************************************
\r
34 * This demo application creates eight co-routines and four tasks (five
\r
35 * including the idle task). The co-routines execute as part of the idle task
\r
36 * hook. The application is limited in size to allow its compilation using
\r
37 * the KickStart version of the IAR compiler.
\r
39 * Six of the created co-routines are the standard 'co-routine flash'
\r
40 * co-routines contained within the Demo/Common/Minimal/crflash.c file and
\r
41 * documented on the FreeRTOS.org WEB site.
\r
43 * The 'LCD Task' waits on a message queue for messages informing it what and
\r
44 * where to display text. This is the only task that accesses the LCD
\r
45 * so mutual exclusion is guaranteed.
\r
47 * The 'LCD Message Task' periodically sends strings to the LCD Task using
\r
48 * the message queue. The strings are rotated to form a short message and
\r
49 * are written to the top row of the LCD.
\r
51 * The 'ADC Co-routine' periodically reads the ADC input that is connected to
\r
52 * the light sensor, forms a short message from the value, and then sends this
\r
53 * message to the LCD Task using the same message queue. The ADC readings are
\r
54 * displayed on the bottom row of the LCD.
\r
56 * The eighth co-routine and final task control the transmission and reception
\r
57 * of a string to UART 0. The co-routine periodically sends the first
\r
58 * character of the string to the UART, with the UART's TxEnd interrupt being
\r
59 * used to transmit the remaining characters. The UART's RxEnd interrupt
\r
60 * receives the characters and places them on a queue to be processed by the
\r
61 * 'COMs Rx' task. An error is latched should an unexpected character be
\r
62 * received, or any character be received out of sequence.
\r
64 * A loopback connector is required to ensure that each character transmitted
\r
65 * on the UART is also received on the same UART. For test purposes the UART
\r
66 * FIFO's are not utalised in order to maximise the interrupt overhead. Also
\r
67 * a pseudo random interval is used between the start of each transmission in
\r
68 * order that the resultant interrupts are more randomly distributed and
\r
69 * therefore more likely to highlight any problems.
\r
71 * The flash co-routines control LED's zero to four. LED five is toggled each
\r
72 * time the string is transmitted on the UART. LED six is toggled each time
\r
73 * the string is CORRECTLY received on the UART. LED seven is latched on
\r
74 * should an error be detected in any task or co-routine.
\r
76 * In addition the idle task makes repetitive calls to
\r
77 * vSetAndCheckRegisters(). This simply loads the general purpose registers
\r
78 * with a known value, then checks each register to ensure the held value is
\r
79 * still correct. As a low priority task this checking routine is likely to
\r
80 * get repeatedly swapped in and out. A register being found to contain an
\r
81 * incorrect value is therefore indicative of an error in the task switching
\r
86 /* standard include files. */
\r
89 /* Scheduler include files. */
\r
90 #include "FreeRTOS.h"
\r
93 #include "croutine.h"
\r
95 /* Demo application include files. */
\r
96 #include "partest.h"
\r
97 #include "crflash.h"
\r
98 #include "commstest.h"
\r
100 /* Library include files. */
\r
101 #include "DriverLib.h"
\r
103 /* The time to delay between writing each character to the LCD. */
\r
104 #define mainCHAR_WRITE_DELAY ( 2 / portTICK_RATE_MS )
\r
106 /* The time to delay between writing each string to the LCD. */
\r
107 #define mainSTRING_WRITE_DELAY ( 400 / portTICK_RATE_MS )
\r
109 #define mainADC_DELAY ( 200 / portTICK_RATE_MS )
\r
111 /* The number of flash co-routines to create. */
\r
112 #define mainNUM_FLASH_CO_ROUTINES ( 5 )
\r
114 /* The length of the queue used to send messages to the LCD task. */
\r
115 #define mainLCD_QUEUE_LEN ( 3 )
\r
117 /* The priority of the co-routine used to initiate the transmission of the
\r
118 string on UART 0. */
\r
119 #define mainTX_CO_ROUTINE_PRIORITY ( 1 )
\r
120 #define mainADC_CO_ROUTINE_PRIORITY ( 2 )
\r
122 /* Only one of each co-routine is created so its index is not important. */
\r
123 #define mainTX_CO_ROUTINE_INDEX ( 0 )
\r
124 #define mainADC_CO_ROUTINE_INDEX ( 0 )
\r
126 /* The task priorities. */
\r
127 #define mainLCD_TASK_PRIORITY ( tskIDLE_PRIORITY + 1 )
\r
128 #define mainMSG_TASK_PRIORITY ( mainLCD_TASK_PRIORITY - 1 )
\r
129 #define mainCOMMS_RX_TASK_PRIORITY ( tskIDLE_PRIORITY + 1 )
\r
131 /* The LCD had two rows. */
\r
132 #define mainTOP_ROW 0
\r
133 #define mainBOTTOM_ROW 1
\r
135 /* Dimension for the buffer into which the ADC value string is written. */
\r
136 #define mainMAX_ADC_STRING_LEN 20
\r
138 /* The LED that is lit should an error be detected in any of the tasks or
\r
140 #define mainFAIL_LED ( 7 )
\r
142 /*-----------------------------------------------------------*/
\r
145 * The task that displays text on the LCD.
\r
147 static void prvLCDTask( void * pvParameters );
\r
150 * The task that sends messages to be displayed on the top row of the LCD.
\r
152 static void prvLCDMessageTask( void * pvParameters );
\r
155 * The co-routine that reads the ADC and sends messages for display on the
\r
156 * bottom row of the LCD.
\r
158 static void prvADCCoRoutine( xCoRoutineHandle xHandle, unsigned portBASE_TYPE uxIndex );
\r
161 * Function to simply set a known value into the general purpose registers
\r
162 * then read them back to ensure they remain set correctly. An incorrect value
\r
163 * being indicative of an error in the task switching mechanism.
\r
165 extern void vSetAndCheckRegisters( void );
\r
168 * Latch the LED that indicates that an error has occurred.
\r
170 void vSetErrorLED( void );
\r
173 * Thread safe write to the PDC.
\r
175 static void prvPDCWrite( portCHAR cAddress, portCHAR cData );
\r
178 * Sets up the hardware used by the demo.
\r
180 static void prvSetupHardware( void );
\r
183 /*-----------------------------------------------------------*/
\r
185 /* The structure that is passed on the LCD message queue. */
\r
188 portCHAR **ppcMessageToDisplay; /*<< Points to a char* pointing to the message to display. */
\r
189 portBASE_TYPE xRow; /*<< The row on which the message should be displayed. */
\r
192 /* Error flag set to pdFAIL if an error is encountered in the tasks/co-routines
\r
193 defined within this file. */
\r
194 unsigned portBASE_TYPE uxErrorStatus = pdPASS;
\r
196 /* The queue used to transmit messages to the LCD task. */
\r
197 static xQueueHandle xLCDQueue;
\r
199 /*-----------------------------------------------------------*/
\r
202 * Setup the hardware, create the tasks/co-routines, then start the scheduler.
\r
206 /* Create the queue used by tasks wanting to write to the LCD. */
\r
207 xLCDQueue = xQueueCreate( mainLCD_QUEUE_LEN, sizeof( xLCDMessage ) );
\r
209 /* Setup the ports used by the demo and the clock. */
\r
210 prvSetupHardware();
\r
212 /* Create the co-routines that flash the LED's. */
\r
213 vStartFlashCoRoutines( mainNUM_FLASH_CO_ROUTINES );
\r
215 /* Create the co-routine that initiates the transmission of characters
\r
216 on the UART and the task that receives them, as described at the top of
\r
218 xCoRoutineCreate( vSerialTxCoRoutine, mainTX_CO_ROUTINE_PRIORITY, mainTX_CO_ROUTINE_INDEX );
\r
219 xTaskCreate( vCommsRxTask, "CMS", configMINIMAL_STACK_SIZE, NULL, mainCOMMS_RX_TASK_PRIORITY, NULL );
\r
221 /* Create the task that waits for messages to display on the LCD, plus the
\r
222 task and co-routine that send messages for display (as described at the top
\r
224 xTaskCreate( prvLCDTask, "LCD", configMINIMAL_STACK_SIZE, ( void * ) &xLCDQueue, mainLCD_TASK_PRIORITY, NULL );
\r
225 xTaskCreate( prvLCDMessageTask, "MSG", configMINIMAL_STACK_SIZE, ( void * ) &xLCDQueue, mainMSG_TASK_PRIORITY, NULL );
\r
226 xCoRoutineCreate( prvADCCoRoutine, mainADC_CO_ROUTINE_PRIORITY, mainADC_CO_ROUTINE_INDEX );
\r
228 /* Start the scheduler running the tasks and co-routines just created. */
\r
229 vTaskStartScheduler();
\r
231 /* Should not get here unless we did not have enough memory to start the
\r
235 /*-----------------------------------------------------------*/
\r
237 static void prvLCDMessageTask( void * pvParameters )
\r
239 /* The strings that are written to the LCD. */
\r
240 portCHAR *pcStringsToDisplay[] = {
\r
244 "www.FreeRTOS.org",
\r
248 xQueueHandle *pxLCDQueue;
\r
249 xLCDMessage xMessageToSend;
\r
250 portBASE_TYPE xIndex = 0;
\r
252 /* To test the parameter passing mechanism, the queue on which messages are
\r
253 posted is passed in as a parameter even though it is available as a file
\r
254 scope variable anyway. */
\r
255 pxLCDQueue = ( xQueueHandle * ) pvParameters;
\r
259 /* Wait until it is time to move onto the next string. */
\r
260 vTaskDelay( mainSTRING_WRITE_DELAY );
\r
262 /* Create the message object to send to the LCD task. */
\r
263 xMessageToSend.ppcMessageToDisplay = &pcStringsToDisplay[ xIndex ];
\r
264 xMessageToSend.xRow = mainTOP_ROW;
\r
266 /* Post the message to be displayed. */
\r
267 if( !xQueueSend( *pxLCDQueue, ( void * ) &xMessageToSend, 0 ) )
\r
269 uxErrorStatus = pdFAIL;
\r
272 /* Move onto the next message, wrapping when necessary. */
\r
274 if( *( pcStringsToDisplay[ xIndex ] ) == 0x00 )
\r
278 /* Delay longer before going back to the start of the messages. */
\r
279 vTaskDelay( mainSTRING_WRITE_DELAY * 2 );
\r
283 /*-----------------------------------------------------------*/
\r
285 void prvLCDTask( void * pvParameters )
\r
287 unsigned portBASE_TYPE uxIndex;
\r
288 xQueueHandle *pxLCDQueue;
\r
289 xLCDMessage xReceivedMessage;
\r
290 portCHAR *pcString;
\r
291 const unsigned portCHAR ucCFGData[] = {
\r
292 0x30, /* Set data bus to 8-bits. */
\r
295 0x3C, /* Number of lines/font. */
\r
296 0x08, /* Display off. */
\r
297 0x01, /* Display clear. */
\r
298 0x06, /* Entry mode [cursor dir][shift]. */
\r
299 0x0C /* Display on [display on][curson on][blinking on]. */
\r
302 /* To test the parameter passing mechanism, the queue on which messages are
\r
303 received is passed in as a parameter even though it is available as a file
\r
304 scope variable anyway. */
\r
305 pxLCDQueue = ( xQueueHandle * ) pvParameters;
\r
307 /* Configure the LCD. */
\r
309 while( uxIndex < sizeof( ucCFGData ) )
\r
311 prvPDCWrite( PDC_LCD_CSR, ucCFGData[ uxIndex ] );
\r
313 vTaskDelay( mainCHAR_WRITE_DELAY );
\r
316 /* Turn the LCD Backlight on. */
\r
317 prvPDCWrite( PDC_CSR, 0x01 );
\r
319 /* Clear display. */
\r
320 vTaskDelay( mainCHAR_WRITE_DELAY );
\r
321 prvPDCWrite( PDC_LCD_CSR, LCD_CLEAR );
\r
326 /* Wait for a message to arrive. */
\r
327 if( xQueueReceive( *pxLCDQueue, &xReceivedMessage, portMAX_DELAY ) )
\r
329 /* Which row does the received message say to write to? */
\r
330 PDCLCDSetPos( 0, xReceivedMessage.xRow );
\r
332 /* Where is the string we are going to display? */
\r
333 pcString = *xReceivedMessage.ppcMessageToDisplay;
\r
337 /* Don't write out the string too quickly as LCD's are usually
\r
338 pretty slow devices. */
\r
339 vTaskDelay( mainCHAR_WRITE_DELAY );
\r
340 prvPDCWrite( PDC_LCD_RAM, *pcString );
\r
346 /*-----------------------------------------------------------*/
\r
348 static void prvADCCoRoutine( xCoRoutineHandle xHandle, unsigned portBASE_TYPE uxIndex )
\r
350 static unsigned portLONG ulADCValue;
\r
351 static portCHAR cMessageBuffer[ mainMAX_ADC_STRING_LEN ];
\r
352 static portCHAR *pcMessage;
\r
353 static xLCDMessage xMessageToSend;
\r
355 /* Co-routines MUST start with a call to crSTART(). */
\r
356 crSTART( xHandle );
\r
360 /* Start an ADC conversion. */
\r
361 ADCProcessorTrigger( ADC_BASE, 0 );
\r
363 /* Simply delay - when we unblock the result should be available */
\r
364 crDELAY( xHandle, mainADC_DELAY );
\r
366 /* Get the ADC result. */
\r
367 ADCSequenceDataGet( ADC_BASE, 0, &ulADCValue );
\r
369 /* Create a string with the result. */
\r
370 sprintf( cMessageBuffer, "ADC = %d ", ulADCValue );
\r
371 pcMessage = cMessageBuffer;
\r
373 /* Configure the message we are going to send for display. */
\r
374 xMessageToSend.ppcMessageToDisplay = ( portCHAR** ) &pcMessage;
\r
375 xMessageToSend.xRow = mainBOTTOM_ROW;
\r
377 /* Send the string to the LCD task for display. We are sending
\r
378 on a task queue so do not have the option to block. */
\r
379 if( !xQueueSend( xLCDQueue, ( void * ) &xMessageToSend, 0 ) )
\r
381 uxErrorStatus = pdFAIL;
\r
385 /* Co-routines MUST end with a call to crEND(). */
\r
388 /*-----------------------------------------------------------*/
\r
390 static void prvSetupHardware( void )
\r
392 /* Setup the PLL. */
\r
393 SysCtlClockSet( SYSCTL_SYSDIV_10 | SYSCTL_USE_PLL | SYSCTL_OSC_MAIN | SYSCTL_XTAL_6MHZ );
\r
395 /* Initialise the hardware used to talk to the LCD, LED's and UART. */
\r
397 vParTestInitialise();
\r
400 /* The ADC is used to read the light sensor. */
\r
401 SysCtlPeripheralEnable( SYSCTL_PERIPH_ADC );
\r
402 ADCSequenceConfigure( ADC_BASE, 3, ADC_TRIGGER_PROCESSOR, 0);
\r
403 ADCSequenceStepConfigure( ADC_BASE, 0, 0, ADC_CTL_CH0 | ADC_CTL_END );
\r
404 ADCSequenceEnable( ADC_BASE, 0 );
\r
407 /*-----------------------------------------------------------*/
\r
409 static void prvPDCWrite( portCHAR cAddress, portCHAR cData )
\r
413 PDCWrite( cAddress, cData );
\r
417 /*-----------------------------------------------------------*/
\r
419 void vSetErrorLED( void )
\r
421 vParTestSetLED( mainFAIL_LED, pdTRUE );
\r
423 /*-----------------------------------------------------------*/
\r
425 void vApplicationIdleHook( void )
\r
427 /* The co-routines are executed in the idle task using the idle task
\r
431 /* Schedule the co-routines. */
\r
432 vCoRoutineSchedule();
\r
434 /* Run the register check function between each co-routine. */
\r
435 vSetAndCheckRegisters();
\r
437 /* See if the comms task and co-routine has found any errors. */
\r
438 if( uxGetCommsStatus() != pdPASS )
\r
440 vParTestSetLED( mainFAIL_LED, pdTRUE );
\r
444 /*-----------------------------------------------------------*/
\r