2 FreeRTOS.org V5.1.0 - Copyright (C) 2003-2008 Richard Barry.
\r
4 This file is part of the FreeRTOS.org distribution.
\r
6 FreeRTOS.org is free software; you can redistribute it and/or modify
\r
7 it under the terms of the GNU General Public License as published by
\r
8 the Free Software Foundation; either version 2 of the License, or
\r
9 (at your option) any later version.
\r
11 FreeRTOS.org is distributed in the hope that it will be useful,
\r
12 but WITHOUT ANY WARRANTY; without even the implied warranty of
\r
13 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
\r
14 GNU General Public License for more details.
\r
16 You should have received a copy of the GNU General Public License
\r
17 along with FreeRTOS.org; if not, write to the Free Software
\r
18 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
\r
20 A special exception to the GPL can be applied should you wish to distribute
\r
21 a combined work that includes FreeRTOS.org, without being obliged to provide
\r
22 the source code for any proprietary components. See the licensing section
\r
23 of http://www.FreeRTOS.org for full details of how and when the exception
\r
26 ***************************************************************************
\r
27 ***************************************************************************
\r
29 * SAVE TIME AND MONEY! We can port FreeRTOS.org to your own hardware, *
\r
30 * and even write all or part of your application on your behalf. *
\r
31 * See http://www.OpenRTOS.com for details of the services we provide to *
\r
32 * expedite your project. *
\r
34 ***************************************************************************
\r
35 ***************************************************************************
\r
37 Please ensure to read the configuration and relevant port sections of the
\r
38 online documentation.
\r
40 http://www.FreeRTOS.org - Documentation, latest information, license and
\r
43 http://www.SafeRTOS.com - A version that is certified for use in safety
\r
46 http://www.OpenRTOS.com - Commercial support, development, porting,
\r
47 licensing and training services.
\r
52 * This project contains an application demonstrating the use of the
\r
53 * FreeRTOS.org mini real time scheduler on the Luminary Micro LM3S811 Eval
\r
54 * board. See http://www.FreeRTOS.org for more information.
\r
56 * main() simply sets up the hardware, creates all the demo application tasks,
\r
57 * then starts the scheduler. http://www.freertos.org/a00102.html provides
\r
58 * more information on the standard demo tasks.
\r
60 * In addition to a subset of the standard demo application tasks, main.c also
\r
61 * defines the following tasks:
\r
63 * + A 'Print' task. The print task is the only task permitted to access the
\r
64 * LCD - thus ensuring mutual exclusion and consistent access to the resource.
\r
65 * Other tasks do not access the LCD directly, but instead send the text they
\r
66 * wish to display to the print task. The print task spends most of its time
\r
67 * blocked - only waking when a message is queued for display.
\r
69 * + A 'Button handler' task. The eval board contains a user push button that
\r
70 * is configured to generate interrupts. The interrupt handler uses a
\r
71 * semaphore to wake the button handler task - demonstrating how the priority
\r
72 * mechanism can be used to defer interrupt processing to the task level. The
\r
73 * button handler task sends a message both to the LCD (via the print task) and
\r
74 * the UART where it can be viewed using a dumb terminal (via the UART to USB
\r
75 * converter on the eval board). NOTES: The dumb terminal must be closed in
\r
76 * order to reflash the microcontroller. A very basic interrupt driven UART
\r
77 * driver is used that does not use the FIFO. 19200 baud is used.
\r
79 * + A 'check' task. The check task only executes every five seconds but has a
\r
80 * high priority so is guaranteed to get processor time. Its function is to
\r
81 * check that all the other tasks are still operational and that no errors have
\r
82 * been detected at any time. If no errors have every been detected 'PASS' is
\r
83 * written to the display (via the print task) - if an error has ever been
\r
84 * detected the message is changed to 'FAIL'. The position of the message is
\r
85 * changed for each write.
\r
90 /* Environment includes. */
\r
91 #include "DriverLib.h"
\r
93 /* Scheduler includes. */
\r
94 #include "FreeRTOS.h"
\r
99 /* Demo app includes. */
\r
100 #include "integer.h"
\r
102 #include "semtest.h"
\r
103 #include "BlockQ.h"
\r
105 /* Delay between cycles of the 'check' task. */
\r
106 #define mainCHECK_DELAY ( ( portTickType ) 5000 / portTICK_RATE_MS )
\r
108 /* UART configuration - note this does not use the FIFO so is not very
\r
110 #define mainBAUD_RATE ( 19200 )
\r
111 #define mainFIFO_SET ( 0x10 )
\r
113 /* Demo task priorities. */
\r
114 #define mainQUEUE_POLL_PRIORITY ( tskIDLE_PRIORITY + 2 )
\r
115 #define mainCHECK_TASK_PRIORITY ( tskIDLE_PRIORITY + 3 )
\r
116 #define mainSEM_TEST_PRIORITY ( tskIDLE_PRIORITY + 1 )
\r
117 #define mainBLOCK_Q_PRIORITY ( tskIDLE_PRIORITY + 2 )
\r
119 /* Demo board specifics. */
\r
120 #define mainPUSH_BUTTON GPIO_PIN_4
\r
123 #define mainQUEUE_SIZE ( 3 )
\r
124 #define mainDEBOUNCE_DELAY ( ( portTickType ) 150 / portTICK_RATE_MS )
\r
125 #define mainNO_DELAY ( ( portTickType ) 0 )
\r
127 * Configure the processor and peripherals for this demo.
\r
129 static void prvSetupHardware( void );
\r
132 * The 'check' task, as described at the top of this file.
\r
134 static void vCheckTask( void *pvParameters );
\r
137 * The task that is woken by the ISR that processes GPIO interrupts originating
\r
138 * from the push button.
\r
140 static void vButtonHandlerTask( void *pvParameters );
\r
143 * The task that controls access to the LCD.
\r
145 static void vPrintTask( void *pvParameter );
\r
147 /* String that is transmitted on the UART. */
\r
148 static portCHAR *cMessage = "Task woken by button interrupt! --- ";
\r
149 static volatile portCHAR *pcNextChar;
\r
151 /* The semaphore used to wake the button handler task from within the GPIO
\r
152 interrupt handler. */
\r
153 xSemaphoreHandle xButtonSemaphore;
\r
155 /* The queue used to send strings to the print task for display on the LCD. */
\r
156 xQueueHandle xPrintQueue;
\r
158 /*-----------------------------------------------------------*/
\r
162 /* Configure the clocks, UART and GPIO. */
\r
163 prvSetupHardware();
\r
165 /* Create the semaphore used to wake the button handler task from the GPIO
\r
167 vSemaphoreCreateBinary( xButtonSemaphore );
\r
168 xSemaphoreTake( xButtonSemaphore, 0 );
\r
170 /* Create the queue used to pass message to vPrintTask. */
\r
171 xPrintQueue = xQueueCreate( mainQUEUE_SIZE, sizeof( portCHAR * ) );
\r
173 /* Start the standard demo tasks. */
\r
174 vStartIntegerMathTasks( tskIDLE_PRIORITY );
\r
175 vStartPolledQueueTasks( mainQUEUE_POLL_PRIORITY );
\r
176 vStartSemaphoreTasks( mainSEM_TEST_PRIORITY );
\r
177 vStartBlockingQueueTasks( mainBLOCK_Q_PRIORITY );
\r
179 /* Start the tasks defined within the file. */
\r
180 xTaskCreate( vCheckTask, "Check", configMINIMAL_STACK_SIZE, NULL, mainCHECK_TASK_PRIORITY, NULL );
\r
181 xTaskCreate( vButtonHandlerTask, "Status", configMINIMAL_STACK_SIZE, NULL, mainCHECK_TASK_PRIORITY + 1, NULL );
\r
182 xTaskCreate( vPrintTask, "Print", configMINIMAL_STACK_SIZE, NULL, mainCHECK_TASK_PRIORITY - 1, NULL );
\r
184 /* Start the scheduler. */
\r
185 vTaskStartScheduler();
\r
187 /* Will only get here if there was insufficient heap to start the
\r
192 /*-----------------------------------------------------------*/
\r
194 static void vCheckTask( void *pvParameters )
\r
196 portBASE_TYPE xErrorOccurred = pdFALSE;
\r
197 portTickType xLastExecutionTime;
\r
198 const portCHAR *pcPassMessage = "PASS";
\r
199 const portCHAR *pcFailMessage = "FAIL";
\r
201 /* Initialise xLastExecutionTime so the first call to vTaskDelayUntil()
\r
202 works correctly. */
\r
203 xLastExecutionTime = xTaskGetTickCount();
\r
207 /* Perform this check every mainCHECK_DELAY milliseconds. */
\r
208 vTaskDelayUntil( &xLastExecutionTime, mainCHECK_DELAY );
\r
210 /* Has an error been found in any task? */
\r
212 if( xAreIntegerMathsTaskStillRunning() != pdTRUE )
\r
214 xErrorOccurred = pdTRUE;
\r
217 if( xArePollingQueuesStillRunning() != pdTRUE )
\r
219 xErrorOccurred = pdTRUE;
\r
222 if( xAreSemaphoreTasksStillRunning() != pdTRUE )
\r
224 xErrorOccurred = pdTRUE;
\r
227 if( xAreBlockingQueuesStillRunning() != pdTRUE )
\r
229 xErrorOccurred = pdTRUE;
\r
232 /* Send either a pass or fail message. If an error is found it is
\r
233 never cleared again. We do not write directly to the LCD, but instead
\r
234 queue a message for display by the print task. */
\r
235 if( xErrorOccurred == pdTRUE )
\r
237 xQueueSend( xPrintQueue, &pcFailMessage, portMAX_DELAY );
\r
241 xQueueSend( xPrintQueue, &pcPassMessage, portMAX_DELAY );
\r
245 /*-----------------------------------------------------------*/
\r
247 static void prvSetupHardware( void )
\r
249 /* Setup the PLL. */
\r
250 SysCtlClockSet( SYSCTL_SYSDIV_10 | SYSCTL_USE_PLL | SYSCTL_OSC_MAIN | SYSCTL_XTAL_6MHZ );
\r
252 /* Setup the push button. */
\r
253 SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOC);
\r
254 GPIODirModeSet(GPIO_PORTC_BASE, mainPUSH_BUTTON, GPIO_DIR_MODE_IN);
\r
255 GPIOIntTypeSet( GPIO_PORTC_BASE, mainPUSH_BUTTON,GPIO_FALLING_EDGE );
\r
256 IntPrioritySet( INT_GPIOC, configKERNEL_INTERRUPT_PRIORITY );
\r
257 GPIOPinIntEnable( GPIO_PORTC_BASE, mainPUSH_BUTTON );
\r
258 IntEnable( INT_GPIOC );
\r
262 /* Enable the UART. */
\r
263 SysCtlPeripheralEnable(SYSCTL_PERIPH_UART0);
\r
264 SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOA);
\r
266 /* Set GPIO A0 and A1 as peripheral function. They are used to output the
\r
268 GPIODirModeSet( GPIO_PORTA_BASE, GPIO_PIN_0 | GPIO_PIN_1, GPIO_DIR_MODE_HW );
\r
270 /* Configure the UART for 8-N-1 operation. */
\r
271 UARTConfigSet( UART0_BASE, mainBAUD_RATE, UART_CONFIG_WLEN_8 | UART_CONFIG_PAR_NONE | UART_CONFIG_STOP_ONE );
\r
273 /* We don't want to use the fifo. This is for test purposes to generate
\r
274 as many interrupts as possible. */
\r
275 HWREG( UART0_BASE + UART_O_LCR_H ) &= ~mainFIFO_SET;
\r
277 /* Enable Tx interrupts. */
\r
278 HWREG( UART0_BASE + UART_O_IM ) |= UART_INT_TX;
\r
279 IntPrioritySet( INT_UART0, configKERNEL_INTERRUPT_PRIORITY );
\r
280 IntEnable( INT_UART0 );
\r
283 /* Initialise the LCD> */
\r
284 OSRAMInit( false );
\r
285 OSRAMStringDraw("www.FreeRTOS.org", 0, 0);
\r
286 OSRAMStringDraw("LM3S811 demo", 16, 1);
\r
288 /*-----------------------------------------------------------*/
\r
290 static void vButtonHandlerTask( void *pvParameters )
\r
292 const portCHAR *pcInterruptMessage = "Int";
\r
296 /* Wait for a GPIO interrupt to wake this task. */
\r
297 while( xSemaphoreTake( xButtonSemaphore, portMAX_DELAY ) != pdPASS );
\r
299 /* Start the Tx of the message on the UART. */
\r
300 UARTIntDisable( UART0_BASE, UART_INT_TX );
\r
302 pcNextChar = cMessage;
\r
304 /* Send the first character. */
\r
305 if( !( HWREG( UART0_BASE + UART_O_FR ) & UART_FR_TXFF ) )
\r
307 HWREG( UART0_BASE + UART_O_DR ) = *pcNextChar;
\r
312 UARTIntEnable(UART0_BASE, UART_INT_TX);
\r
314 /* Queue a message for the print task to display on the LCD. */
\r
315 xQueueSend( xPrintQueue, &pcInterruptMessage, portMAX_DELAY );
\r
317 /* Make sure we don't process bounces. */
\r
318 vTaskDelay( mainDEBOUNCE_DELAY );
\r
319 xSemaphoreTake( xButtonSemaphore, mainNO_DELAY );
\r
323 /*-----------------------------------------------------------*/
\r
325 void vUART_ISR(void)
\r
327 unsigned portLONG ulStatus;
\r
329 /* What caused the interrupt. */
\r
330 ulStatus = UARTIntStatus( UART0_BASE, pdTRUE );
\r
332 /* Clear the interrupt. */
\r
333 UARTIntClear( UART0_BASE, ulStatus );
\r
335 /* Was a Tx interrupt pending? */
\r
336 if( ulStatus & UART_INT_TX )
\r
338 /* Send the next character in the string. We are not using the FIFO. */
\r
339 if( *pcNextChar != 0 )
\r
341 if( !( HWREG( UART0_BASE + UART_O_FR ) & UART_FR_TXFF ) )
\r
343 HWREG( UART0_BASE + UART_O_DR ) = *pcNextChar;
\r
349 /*-----------------------------------------------------------*/
\r
351 void vGPIO_ISR( void )
\r
353 portBASE_TYPE xHigherPriorityTaskWoken = pdFALSE;
\r
355 /* Clear the interrupt. */
\r
356 GPIOPinIntClear(GPIO_PORTC_BASE, mainPUSH_BUTTON);
\r
358 /* Wake the button handler task. */
\r
359 xSemaphoreGiveFromISR( xButtonSemaphore, &xHigherPriorityTaskWoken );
\r
361 portEND_SWITCHING_ISR( xHigherPriorityTaskWoken );
\r
363 /*-----------------------------------------------------------*/
\r
365 static void vPrintTask( void *pvParameters )
\r
367 portCHAR *pcMessage;
\r
368 unsigned portBASE_TYPE uxLine = 0, uxRow = 0;
\r
372 /* Wait for a message to arrive. */
\r
373 xQueueReceive( xPrintQueue, &pcMessage, portMAX_DELAY );
\r
375 /* Write the message to the LCD. */
\r
379 OSRAMStringDraw( pcMessage, uxLine & 0x3f, uxRow & 0x01);
\r