2 FreeRTOS.org V4.7.0 - Copyright (C) 2003-2007 Richard Barry.
\r
4 This file is part of the FreeRTOS.org distribution.
\r
6 FreeRTOS.org is free software; you can redistribute it and/or modify
\r
7 it under the terms of the GNU General Public License as published by
\r
8 the Free Software Foundation; either version 2 of the License, or
\r
9 (at your option) any later version.
\r
11 FreeRTOS.org is distributed in the hope that it will be useful,
\r
12 but WITHOUT ANY WARRANTY; without even the implied warranty of
\r
13 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
\r
14 GNU General Public License for more details.
\r
16 You should have received a copy of the GNU General Public License
\r
17 along with FreeRTOS.org; if not, write to the Free Software
\r
18 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
\r
20 A special exception to the GPL can be applied should you wish to distribute
\r
21 a combined work that includes FreeRTOS.org, without being obliged to provide
\r
22 the source code for any proprietary components. See the licensing section
\r
23 of http://www.FreeRTOS.org for full details of how and when the exception
\r
26 ***************************************************************************
\r
27 See http://www.FreeRTOS.org for documentation, latest information, license
\r
28 and contact details. Please ensure to read the configuration and relevant
\r
29 port sections of the online documentation.
\r
31 Also see http://www.SafeRTOS.com a version that has been certified for use
\r
32 in safety critical systems, plus commercial licensing, development and
\r
34 ***************************************************************************
\r
39 * This project contains an application demonstrating the use of the
\r
40 * FreeRTOS.org mini real time scheduler on the Luminary Micro LM3S811 Eval
\r
41 * board. See http://www.FreeRTOS.org for more information.
\r
43 * main() simply sets up the hardware, creates all the demo application tasks,
\r
44 * then starts the scheduler. http://www.freertos.org/a00102.html provides
\r
45 * more information on the standard demo tasks.
\r
47 * In addition to a subset of the standard demo application tasks, main.c also
\r
48 * defines the following tasks:
\r
50 * + A 'Print' task. The print task is the only task permitted to access the
\r
51 * LCD - thus ensuring mutual exclusion and consistent access to the resource.
\r
52 * Other tasks do not access the LCD directly, but instead send the text they
\r
53 * wish to display to the print task. The print task spends most of its time
\r
54 * blocked - only waking when a message is queued for display.
\r
56 * + A 'Button handler' task. The eval board contains a user push button that
\r
57 * is configured to generate interrupts. The interrupt handler uses a
\r
58 * semaphore to wake the button handler task - demonstrating how the priority
\r
59 * mechanism can be used to defer interrupt processing to the task level. The
\r
60 * button handler task sends a message both to the LCD (via the print task) and
\r
61 * the UART where it can be viewed using a dumb terminal (via the UART to USB
\r
62 * converter on the eval board). NOTES: The dumb terminal must be closed in
\r
63 * order to reflash the microcontroller. A very basic interrupt driven UART
\r
64 * driver is used that does not use the FIFO. 19200 baud is used.
\r
66 * + A 'check' task. The check task only executes every five seconds but has a
\r
67 * high priority so is guaranteed to get processor time. Its function is to
\r
68 * check that all the other tasks are still operational and that no errors have
\r
69 * been detected at any time. If no errors have every been detected 'PASS' is
\r
70 * written to the display (via the print task) - if an error has ever been
\r
71 * detected the message is changed to 'FAIL'. The position of the message is
\r
72 * changed for each write.
\r
77 /* Environment includes. */
\r
78 #include "DriverLib.h"
\r
80 /* Scheduler includes. */
\r
81 #include "FreeRTOS.h"
\r
86 /* Demo app includes. */
\r
87 #include "integer.h"
\r
89 #include "semtest.h"
\r
92 /* Delay between cycles of the 'check' task. */
\r
93 #define mainCHECK_DELAY ( ( portTickType ) 5000 / portTICK_RATE_MS )
\r
95 /* UART configuration - note this does not use the FIFO so is not very
\r
97 #define mainBAUD_RATE ( 19200 )
\r
98 #define mainFIFO_SET ( 0x10 )
\r
100 /* Demo task priorities. */
\r
101 #define mainQUEUE_POLL_PRIORITY ( tskIDLE_PRIORITY + 2 )
\r
102 #define mainCHECK_TASK_PRIORITY ( tskIDLE_PRIORITY + 3 )
\r
103 #define mainSEM_TEST_PRIORITY ( tskIDLE_PRIORITY + 1 )
\r
104 #define mainBLOCK_Q_PRIORITY ( tskIDLE_PRIORITY + 2 )
\r
106 /* Demo board specifics. */
\r
107 #define mainPUSH_BUTTON GPIO_PIN_4
\r
110 #define mainQUEUE_SIZE ( 3 )
\r
111 #define mainDEBOUNCE_DELAY ( ( portTickType ) 150 / portTICK_RATE_MS )
\r
112 #define mainNO_DELAY ( ( portTickType ) 0 )
\r
114 * Configure the processor and peripherals for this demo.
\r
116 static void prvSetupHardware( void );
\r
119 * The 'check' task, as described at the top of this file.
\r
121 static void vCheckTask( void *pvParameters );
\r
124 * The task that is woken by the ISR that processes GPIO interrupts originating
\r
125 * from the push button.
\r
127 static void vButtonHandlerTask( void *pvParameters );
\r
130 * The task that controls access to the LCD.
\r
132 static void vPrintTask( void *pvParameter );
\r
134 /* String that is transmitted on the UART. */
\r
135 static portCHAR *cMessage = "Task woken by button interrupt! --- ";
\r
136 static volatile portCHAR *pcNextChar;
\r
138 /* The semaphore used to wake the button handler task from within the GPIO
\r
139 interrupt handler. */
\r
140 xSemaphoreHandle xButtonSemaphore;
\r
142 /* The queue used to send strings to the print task for display on the LCD. */
\r
143 xQueueHandle xPrintQueue;
\r
145 /*-----------------------------------------------------------*/
\r
149 /* Configure the clocks, UART and GPIO. */
\r
150 prvSetupHardware();
\r
152 /* Create the semaphore used to wake the button handler task from the GPIO
\r
154 vSemaphoreCreateBinary( xButtonSemaphore );
\r
155 xSemaphoreTake( xButtonSemaphore, 0 );
\r
157 /* Create the queue used to pass message to vPrintTask. */
\r
158 xPrintQueue = xQueueCreate( mainQUEUE_SIZE, sizeof( portCHAR * ) );
\r
160 /* Start the standard demo tasks. */
\r
161 vStartIntegerMathTasks( tskIDLE_PRIORITY );
\r
162 vStartPolledQueueTasks( mainQUEUE_POLL_PRIORITY );
\r
163 vStartSemaphoreTasks( mainSEM_TEST_PRIORITY );
\r
164 vStartBlockingQueueTasks( mainBLOCK_Q_PRIORITY );
\r
166 /* Start the tasks defined within the file. */
\r
167 xTaskCreate( vCheckTask, "Check", configMINIMAL_STACK_SIZE, NULL, mainCHECK_TASK_PRIORITY, NULL );
\r
168 xTaskCreate( vButtonHandlerTask, "Status", configMINIMAL_STACK_SIZE, NULL, mainCHECK_TASK_PRIORITY + 1, NULL );
\r
169 xTaskCreate( vPrintTask, "Print", configMINIMAL_STACK_SIZE, NULL, mainCHECK_TASK_PRIORITY - 1, NULL );
\r
171 /* Start the scheduler. */
\r
172 vTaskStartScheduler();
\r
174 /* Will only get here if there was insufficient heap to start the
\r
179 /*-----------------------------------------------------------*/
\r
181 static void vCheckTask( void *pvParameters )
\r
183 portBASE_TYPE xErrorOccurred = pdFALSE;
\r
184 portTickType xLastExecutionTime;
\r
185 const portCHAR *pcPassMessage = "PASS";
\r
186 const portCHAR *pcFailMessage = "FAIL";
\r
188 /* Initialise xLastExecutionTime so the first call to vTaskDelayUntil()
\r
189 works correctly. */
\r
190 xLastExecutionTime = xTaskGetTickCount();
\r
194 /* Perform this check every mainCHECK_DELAY milliseconds. */
\r
195 vTaskDelayUntil( &xLastExecutionTime, mainCHECK_DELAY );
\r
197 /* Has an error been found in any task? */
\r
199 if( xAreIntegerMathsTaskStillRunning() != pdTRUE )
\r
201 xErrorOccurred = pdTRUE;
\r
204 if( xArePollingQueuesStillRunning() != pdTRUE )
\r
206 xErrorOccurred = pdTRUE;
\r
209 if( xAreSemaphoreTasksStillRunning() != pdTRUE )
\r
211 xErrorOccurred = pdTRUE;
\r
214 if( xAreBlockingQueuesStillRunning() != pdTRUE )
\r
216 xErrorOccurred = pdTRUE;
\r
219 /* Send either a pass or fail message. If an error is found it is
\r
220 never cleared again. We do not write directly to the LCD, but instead
\r
221 queue a message for display by the print task. */
\r
222 if( xErrorOccurred == pdTRUE )
\r
224 xQueueSend( xPrintQueue, &pcFailMessage, portMAX_DELAY );
\r
228 xQueueSend( xPrintQueue, &pcPassMessage, portMAX_DELAY );
\r
232 /*-----------------------------------------------------------*/
\r
234 static void prvSetupHardware( void )
\r
236 /* Setup the PLL. */
\r
237 SysCtlClockSet( SYSCTL_SYSDIV_10 | SYSCTL_USE_PLL | SYSCTL_OSC_MAIN | SYSCTL_XTAL_6MHZ );
\r
239 /* Setup the push button. */
\r
240 SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOC);
\r
241 GPIODirModeSet(GPIO_PORTC_BASE, mainPUSH_BUTTON, GPIO_DIR_MODE_IN);
\r
242 GPIOIntTypeSet( GPIO_PORTC_BASE, mainPUSH_BUTTON,GPIO_FALLING_EDGE );
\r
243 IntPrioritySet( INT_GPIOC, configKERNEL_INTERRUPT_PRIORITY );
\r
244 GPIOPinIntEnable( GPIO_PORTC_BASE, mainPUSH_BUTTON );
\r
245 IntEnable( INT_GPIOC );
\r
249 /* Enable the UART. */
\r
250 SysCtlPeripheralEnable(SYSCTL_PERIPH_UART0);
\r
251 SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOA);
\r
253 /* Set GPIO A0 and A1 as peripheral function. They are used to output the
\r
255 GPIODirModeSet( GPIO_PORTA_BASE, GPIO_PIN_0 | GPIO_PIN_1, GPIO_DIR_MODE_HW );
\r
257 /* Configure the UART for 8-N-1 operation. */
\r
258 UARTConfigSetExpClk( UART0_BASE, SysCtlClockGet(), mainBAUD_RATE, UART_CONFIG_WLEN_8 | UART_CONFIG_PAR_NONE | UART_CONFIG_STOP_ONE );
\r
260 /* We don't want to use the fifo. This is for test purposes to generate
\r
261 as many interrupts as possible. */
\r
262 HWREG( UART0_BASE + UART_O_LCR_H ) &= ~mainFIFO_SET;
\r
264 /* Enable Tx interrupts. */
\r
265 HWREG( UART0_BASE + UART_O_IM ) |= UART_INT_TX;
\r
266 IntPrioritySet( INT_UART0, configKERNEL_INTERRUPT_PRIORITY );
\r
267 IntEnable( INT_UART0 );
\r
270 /* Initialise the LCD> */
\r
271 OSRAMInit( false );
\r
272 OSRAMStringDraw("www.FreeRTOS.org", 0, 0);
\r
273 OSRAMStringDraw("LM3S811 demo", 16, 1);
\r
275 /*-----------------------------------------------------------*/
\r
277 static void vButtonHandlerTask( void *pvParameters )
\r
279 const portCHAR *pcInterruptMessage = "Int";
\r
283 /* Wait for a GPIO interrupt to wake this task. */
\r
284 while( xSemaphoreTake( xButtonSemaphore, portMAX_DELAY ) != pdPASS );
\r
286 /* Start the Tx of the message on the UART. */
\r
287 UARTIntDisable( UART0_BASE, UART_INT_TX );
\r
289 pcNextChar = cMessage;
\r
291 /* Send the first character. */
\r
292 if( !( HWREG( UART0_BASE + UART_O_FR ) & UART_FR_TXFF ) )
\r
294 HWREG( UART0_BASE + UART_O_DR ) = *pcNextChar;
\r
299 UARTIntEnable(UART0_BASE, UART_INT_TX);
\r
301 /* Queue a message for the print task to display on the LCD. */
\r
302 xQueueSend( xPrintQueue, &pcInterruptMessage, portMAX_DELAY );
\r
304 /* Make sure we don't process bounces. */
\r
305 vTaskDelay( mainDEBOUNCE_DELAY );
\r
306 xSemaphoreTake( xButtonSemaphore, mainNO_DELAY );
\r
310 /*-----------------------------------------------------------*/
\r
312 void vUART_ISR(void)
\r
314 unsigned portLONG ulStatus;
\r
316 /* What caused the interrupt. */
\r
317 ulStatus = UARTIntStatus( UART0_BASE, pdTRUE );
\r
319 /* Clear the interrupt. */
\r
320 UARTIntClear( UART0_BASE, ulStatus );
\r
322 /* Was a Tx interrupt pending? */
\r
323 if( ulStatus & UART_INT_TX )
\r
325 /* Send the next character in the string. We are not using the FIFO. */
\r
326 if( *pcNextChar != NULL )
\r
328 if( !( HWREG( UART0_BASE + UART_O_FR ) & UART_FR_TXFF ) )
\r
330 HWREG( UART0_BASE + UART_O_DR ) = *pcNextChar;
\r
336 /*-----------------------------------------------------------*/
\r
338 void vGPIO_ISR( void )
\r
340 /* Clear the interrupt. */
\r
341 GPIOPinIntClear(GPIO_PORTC_BASE, mainPUSH_BUTTON);
\r
343 /* Wake the button handler task. */
\r
344 if( xSemaphoreGiveFromISR( xButtonSemaphore, pdFALSE ) )
\r
346 portEND_SWITCHING_ISR( pdTRUE );
\r
349 /*-----------------------------------------------------------*/
\r
351 static void vPrintTask( void *pvParameters )
\r
353 portCHAR *pcMessage;
\r
354 unsigned portBASE_TYPE uxLine = 0, uxRow = 0;
\r
358 /* Wait for a message to arrive. */
\r
359 xQueueReceive( xPrintQueue, &pcMessage, portMAX_DELAY );
\r
361 /* Write the message to the LCD. */
\r
365 OSRAMStringDraw( pcMessage, uxLine & 0x3f, uxRow & 0x01);
\r