2 FreeRTOS.org V5.1.1 - Copyright (C) 2003-2008 Richard Barry.
\r
4 This file is part of the FreeRTOS.org distribution.
\r
6 FreeRTOS.org is free software; you can redistribute it and/or modify
\r
7 it under the terms of the GNU General Public License as published by
\r
8 the Free Software Foundation; either version 2 of the License, or
\r
9 (at your option) any later version.
\r
11 FreeRTOS.org is distributed in the hope that it will be useful,
\r
12 but WITHOUT ANY WARRANTY; without even the implied warranty of
\r
13 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
\r
14 GNU General Public License for more details.
\r
16 You should have received a copy of the GNU General Public License
\r
17 along with FreeRTOS.org; if not, write to the Free Software
\r
18 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
\r
20 A special exception to the GPL can be applied should you wish to distribute
\r
21 a combined work that includes FreeRTOS.org, without being obliged to provide
\r
22 the source code for any proprietary components. See the licensing section
\r
23 of http://www.FreeRTOS.org for full details of how and when the exception
\r
26 ***************************************************************************
\r
27 ***************************************************************************
\r
29 * SAVE TIME AND MONEY! We can port FreeRTOS.org to your own hardware, *
\r
30 * and even write all or part of your application on your behalf. *
\r
31 * See http://www.OpenRTOS.com for details of the services we provide to *
\r
32 * expedite your project. *
\r
34 ***************************************************************************
\r
35 ***************************************************************************
\r
37 Please ensure to read the configuration and relevant port sections of the
\r
38 online documentation.
\r
40 http://www.FreeRTOS.org - Documentation, latest information, license and
\r
43 http://www.SafeRTOS.com - A version that is certified for use in safety
\r
46 http://www.OpenRTOS.com - Commercial support, development, porting,
\r
47 licensing and training services.
\r
51 * Creates all the demo application tasks, then starts the scheduler. The WEB
\r
52 * documentation provides more details of the standard demo application tasks.
\r
53 * In addition to the standard demo tasks, the following tasks and tests are
\r
54 * defined and/or created within this file:
\r
56 * "Fast Interrupt Test" - A high frequency periodic interrupt is generated
\r
57 * using a free running timer to demonstrate the use of the
\r
58 * configKERNEL_INTERRUPT_PRIORITY configuration constant. The interrupt
\r
59 * service routine measures the number of processor clocks that occur between
\r
60 * each interrupt - and in so doing measures the jitter in the interrupt timing.
\r
61 * The maximum measured jitter time is latched in the ulMaxJitter variable, and
\r
62 * displayed on the LCD by the 'Check' task as described below. The
\r
63 * fast interrupt is configured and handled in the timertest.c source file.
\r
65 * "LCD" task - the LCD task is a 'gatekeeper' task. It is the only task that
\r
66 * is permitted to access the display directly. Other tasks wishing to write a
\r
67 * message to the LCD send the message on a queue to the LCD task instead of
\r
68 * accessing the LCD themselves. The LCD task just blocks on the queue waiting
\r
69 * for messages - waking and displaying the messages as they arrive.
\r
71 * "Check" task - This only executes every five seconds but has the highest
\r
72 * priority so is guaranteed to get processor time. Its main function is to
\r
73 * check that all the standard demo tasks are still operational. Should any
\r
74 * unexpected behaviour within a demo task be discovered the 'check' task will
\r
75 * write an error to the LCD (via the LCD task). If all the demo tasks are
\r
76 * executing with their expected behaviour then the check task writes PASS
\r
77 * along with the max jitter time to the LCD (again via the LCD task), as
\r
82 /* Standard includes. */
\r
85 /* Scheduler includes. */
\r
86 #include "FreeRTOS.h"
\r
90 /* Library includes. */
\r
91 #include "stm32f10x_it.h"
\r
93 /* Demo app includes. */
\r
95 #include "LCD_Message.h"
\r
98 #include "integer.h"
\r
99 #include "blocktim.h"
\r
100 #include "partest.h"
\r
101 #include "semtest.h"
\r
104 #include "comtest2.h"
\r
106 /* Task priorities. */
\r
107 #define mainQUEUE_POLL_PRIORITY ( tskIDLE_PRIORITY + 2 )
\r
108 #define mainCHECK_TASK_PRIORITY ( tskIDLE_PRIORITY + 3 )
\r
109 #define mainSEM_TEST_PRIORITY ( tskIDLE_PRIORITY + 1 )
\r
110 #define mainBLOCK_Q_PRIORITY ( tskIDLE_PRIORITY + 2 )
\r
111 #define mainCREATOR_TASK_PRIORITY ( tskIDLE_PRIORITY + 3 )
\r
112 #define mainFLASH_TASK_PRIORITY ( tskIDLE_PRIORITY + 1 )
\r
113 #define mainCOM_TEST_PRIORITY ( tskIDLE_PRIORITY + 1 )
\r
114 #define mainINTEGER_TASK_PRIORITY ( tskIDLE_PRIORITY )
\r
116 /* Constants related to the LCD. */
\r
117 #define mainMAX_LINE ( 240 )
\r
118 #define mainROW_INCREMENT ( 24 )
\r
119 #define mainMAX_COLUMN ( 20 )
\r
120 #define mainCOLUMN_START ( 319 )
\r
121 #define mainCOLUMN_INCREMENT ( 16 )
\r
123 /* The maximum number of message that can be waiting for display at any one
\r
125 #define mainLCD_QUEUE_SIZE ( 3 )
\r
127 /* The check task uses the sprintf function so requires a little more stack. */
\r
128 #define mainCHECK_TASK_STACK_SIZE ( configMINIMAL_STACK_SIZE + 50 )
\r
130 /* Dimensions the buffer into which the jitter time is written. */
\r
131 #define mainMAX_MSG_LEN 25
\r
133 /* The time between cycles of the 'check' task. */
\r
134 #define mainCHECK_DELAY ( ( portTickType ) 5000 / portTICK_RATE_MS )
\r
136 /* The number of nano seconds between each processor clock. */
\r
137 #define mainNS_PER_CLOCK ( ( unsigned portLONG ) ( ( 1.0 / ( double ) configCPU_CLOCK_HZ ) * 1000000000.0 ) )
\r
139 /* Baud rate used by the comtest tasks. */
\r
140 #define mainCOM_TEST_BAUD_RATE ( 115200 )
\r
142 /* The LED used by the comtest tasks. See the comtest.c file for more
\r
144 #define mainCOM_TEST_LED ( 3 )
\r
146 /*-----------------------------------------------------------*/
\r
149 * Configure the clocks, GPIO and other peripherals as required by the demo.
\r
151 static void prvSetupHardware( void );
\r
154 * Configure the LCD as required by the demo.
\r
156 static void prvConfigureLCD( void );
\r
159 * The LCD is written two by more than one task so is controlled by a
\r
160 * 'gatekeeper' task. This is the only task that is actually permitted to
\r
161 * access the LCD directly. Other tasks wanting to display a message send
\r
162 * the message to the gatekeeper.
\r
164 static void vLCDTask( void *pvParameters );
\r
167 * Retargets the C library printf function to the USART.
\r
169 int fputc( int ch, FILE *f );
\r
172 * Checks the status of all the demo tasks then prints a message to the
\r
173 * display. The message will be either PASS - and include in brackets the
\r
174 * maximum measured jitter time (as described at the to of the file), or a
\r
175 * message that describes which of the standard demo tasks an error has been
\r
178 * Messages are not written directly to the terminal, but passed to vLCDTask
\r
181 static void vCheckTask( void *pvParameters );
\r
184 * Configures the timers and interrupts for the fast interrupt test as
\r
185 * described at the top of this file.
\r
187 extern void vSetupTimerTest( void );
\r
189 /*-----------------------------------------------------------*/
\r
191 /* The queue used to send messages to the LCD task. */
\r
192 xQueueHandle xLCDQueue;
\r
194 /*-----------------------------------------------------------*/
\r
202 prvSetupHardware();
\r
204 /* Create the queue used by the LCD task. Messages for display on the LCD
\r
205 are received via this queue. */
\r
206 xLCDQueue = xQueueCreate( mainLCD_QUEUE_SIZE, sizeof( xLCDMessage ) );
\r
208 /* Start the standard demo tasks. */
\r
209 vStartBlockingQueueTasks( mainBLOCK_Q_PRIORITY );
\r
210 vCreateBlockTimeTasks();
\r
211 vStartSemaphoreTasks( mainSEM_TEST_PRIORITY );
\r
212 vStartPolledQueueTasks( mainQUEUE_POLL_PRIORITY );
\r
213 vStartIntegerMathTasks( mainINTEGER_TASK_PRIORITY );
\r
214 vStartLEDFlashTasks( mainFLASH_TASK_PRIORITY );
\r
215 vAltStartComTestTasks( mainCOM_TEST_PRIORITY, mainCOM_TEST_BAUD_RATE, mainCOM_TEST_LED );
\r
217 /* Start the tasks defined within this file/specific to this demo. */
\r
218 xTaskCreate( vCheckTask, ( signed portCHAR * ) "Check", mainCHECK_TASK_STACK_SIZE, NULL, mainCHECK_TASK_PRIORITY, NULL );
\r
219 xTaskCreate( vLCDTask, ( signed portCHAR * ) "LCD", configMINIMAL_STACK_SIZE, NULL, tskIDLE_PRIORITY, NULL );
\r
221 /* The suicide tasks must be created last as they need to know how many
\r
222 tasks were running prior to their creation in order to ascertain whether
\r
223 or not the correct/expected number of tasks are running at any given time. */
\r
224 vCreateSuicidalTasks( mainCREATOR_TASK_PRIORITY );
\r
226 /* Configure the timers used by the fast interrupt timer test. */
\r
229 /* Start the scheduler. */
\r
230 vTaskStartScheduler();
\r
232 /* Will only get here if there was not enough heap space to create the
\r
236 /*-----------------------------------------------------------*/
\r
238 void vLCDTask( void *pvParameters )
\r
240 xLCDMessage xMessage;
\r
242 /* Initialise the LCD and display a startup message. */
\r
244 LCD_DrawMonoPict( ( unsigned portLONG * ) pcBitmap );
\r
248 /* Wait for a message to arrive that requires displaying. */
\r
249 while( xQueueReceive( xLCDQueue, &xMessage, portMAX_DELAY ) != pdPASS );
\r
251 /* Display the message. Print each message to a different position. */
\r
252 printf( ( portCHAR const * ) xMessage.pcMessage );
\r
255 /*-----------------------------------------------------------*/
\r
257 static void vCheckTask( void *pvParameters )
\r
259 portTickType xLastExecutionTime;
\r
260 xLCDMessage xMessage;
\r
261 static signed portCHAR cPassMessage[ mainMAX_MSG_LEN ];
\r
262 extern unsigned portSHORT usMaxJitter;
\r
264 xLastExecutionTime = xTaskGetTickCount();
\r
265 xMessage.pcMessage = cPassMessage;
\r
269 /* Perform this check every mainCHECK_DELAY milliseconds. */
\r
270 vTaskDelayUntil( &xLastExecutionTime, mainCHECK_DELAY );
\r
272 /* Has an error been found in any task? */
\r
274 if( xAreBlockingQueuesStillRunning() != pdTRUE )
\r
276 xMessage.pcMessage = "ERROR IN BLOCK Q\n";
\r
278 else if( xAreBlockTimeTestTasksStillRunning() != pdTRUE )
\r
280 xMessage.pcMessage = "ERROR IN BLOCK TIME\n";
\r
282 else if( xAreSemaphoreTasksStillRunning() != pdTRUE )
\r
284 xMessage.pcMessage = "ERROR IN SEMAPHORE\n";
\r
286 else if( xArePollingQueuesStillRunning() != pdTRUE )
\r
288 xMessage.pcMessage = "ERROR IN POLL Q\n";
\r
290 else if( xIsCreateTaskStillRunning() != pdTRUE )
\r
292 xMessage.pcMessage = "ERROR IN CREATE\n";
\r
294 else if( xAreIntegerMathsTaskStillRunning() != pdTRUE )
\r
296 xMessage.pcMessage = "ERROR IN MATH\n";
\r
298 else if( xAreComTestTasksStillRunning() != pdTRUE )
\r
300 xMessage.pcMessage = "ERROR IN COM TEST\n";
\r
304 sprintf( ( portCHAR * ) cPassMessage, "PASS [%uns]\n", ( ( unsigned portLONG ) usMaxJitter ) * mainNS_PER_CLOCK );
\r
307 /* Send the message to the LCD gatekeeper for display. */
\r
308 xQueueSend( xLCDQueue, &xMessage, portMAX_DELAY );
\r
311 /*-----------------------------------------------------------*/
\r
313 static void prvSetupHardware( void )
\r
315 /* Start with the clocks in their expected state. */
\r
318 /* Enable HSE (high speed external clock). */
\r
319 RCC_HSEConfig( RCC_HSE_ON );
\r
321 /* Wait till HSE is ready. */
\r
322 while( RCC_GetFlagStatus( RCC_FLAG_HSERDY ) == RESET )
\r
326 /* 2 wait states required on the flash. */
\r
327 *( ( unsigned portLONG * ) 0x40022000 ) = 0x02;
\r
329 /* HCLK = SYSCLK */
\r
330 RCC_HCLKConfig( RCC_SYSCLK_Div1 );
\r
333 RCC_PCLK2Config( RCC_HCLK_Div1 );
\r
335 /* PCLK1 = HCLK/2 */
\r
336 RCC_PCLK1Config( RCC_HCLK_Div2 );
\r
338 /* PLLCLK = 8MHz * 9 = 72 MHz. */
\r
339 RCC_PLLConfig( RCC_PLLSource_HSE_Div1, RCC_PLLMul_9 );
\r
342 RCC_PLLCmd( ENABLE );
\r
344 /* Wait till PLL is ready. */
\r
345 while(RCC_GetFlagStatus(RCC_FLAG_PLLRDY) == RESET)
\r
349 /* Select PLL as system clock source. */
\r
350 RCC_SYSCLKConfig( RCC_SYSCLKSource_PLLCLK );
\r
352 /* Wait till PLL is used as system clock source. */
\r
353 while( RCC_GetSYSCLKSource() != 0x08 )
\r
357 /* Enable GPIOA, GPIOB, GPIOC, GPIOD, GPIOE and AFIO clocks */
\r
358 RCC_APB2PeriphClockCmd( RCC_APB2Periph_GPIOA | RCC_APB2Periph_GPIOB |RCC_APB2Periph_GPIOC
\r
359 | RCC_APB2Periph_GPIOD | RCC_APB2Periph_GPIOE | RCC_APB2Periph_AFIO, ENABLE );
\r
361 /* SPI2 Periph clock enable */
\r
362 RCC_APB1PeriphClockCmd( RCC_APB1Periph_SPI2, ENABLE );
\r
365 /* Set the Vector Table base address at 0x08000000 */
\r
366 NVIC_SetVectorTable( NVIC_VectTab_FLASH, 0x0 );
\r
368 NVIC_PriorityGroupConfig( NVIC_PriorityGroup_4 );
\r
370 /* Configure HCLK clock as SysTick clock source. */
\r
371 SysTick_CLKSourceConfig( SysTick_CLKSource_HCLK );
\r
373 vParTestInitialise();
\r
375 /*-----------------------------------------------------------*/
\r
377 static void prvConfigureLCD( void )
\r
379 GPIO_InitTypeDef GPIO_InitStructure;
\r
381 /* Configure LCD Back Light (PA8) as output push-pull */
\r
382 GPIO_InitStructure.GPIO_Pin = GPIO_Pin_8;
\r
383 GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
\r
384 GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
\r
385 GPIO_Init( GPIOA, &GPIO_InitStructure );
\r
387 /* Set the Backlight Pin */
\r
388 GPIO_WriteBit(GPIOA, GPIO_Pin_8, Bit_SET);
\r
390 /* Initialize the LCD */
\r
393 /* Set the Back Color */
\r
394 LCD_SetBackColor( White );
\r
396 /* Set the Text Color */
\r
397 LCD_SetTextColor( 0x051F );
\r
401 /*-----------------------------------------------------------*/
\r
403 int fputc( int ch, FILE *f )
\r
405 static unsigned portSHORT usColumn = 0, usRefColumn = mainCOLUMN_START;
\r
406 static unsigned portCHAR ucLine = 0;
\r
408 if( ( usColumn == 0 ) && ( ucLine == 0 ) )
\r
415 /* Display one character on LCD */
\r
416 LCD_DisplayChar( ucLine, usRefColumn, (u8) ch );
\r
418 /* Decrement the column position by 16 */
\r
419 usRefColumn -= mainCOLUMN_INCREMENT;
\r
421 /* Increment the character counter */
\r
423 if( usColumn == mainMAX_COLUMN )
\r
425 ucLine += mainROW_INCREMENT;
\r
426 usRefColumn = mainCOLUMN_START;
\r
432 /* Move back to the first column of the next line. */
\r
433 ucLine += mainROW_INCREMENT;
\r
434 usRefColumn = mainCOLUMN_START;
\r
438 /* Wrap back to the top of the display. */
\r
439 if( ucLine >= mainMAX_LINE )
\r
446 /*-----------------------------------------------------------*/
\r
449 /* Keep the linker happy. */
\r
450 void assert_failed( unsigned portCHAR* pcFile, unsigned portLONG ulLine )
\r