2 FreeRTOS.org V5.1.1 - Copyright (C) 2003-2008 Richard Barry.
\r
4 This file is part of the FreeRTOS.org distribution.
\r
6 FreeRTOS.org is free software; you can redistribute it and/or modify
\r
7 it under the terms of the GNU General Public License as published by
\r
8 the Free Software Foundation; either version 2 of the License, or
\r
9 (at your option) any later version.
\r
11 FreeRTOS.org is distributed in the hope that it will be useful,
\r
12 but WITHOUT ANY WARRANTY; without even the implied warranty of
\r
13 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
\r
14 GNU General Public License for more details.
\r
16 You should have received a copy of the GNU General Public License
\r
17 along with FreeRTOS.org; if not, write to the Free Software
\r
18 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
\r
20 A special exception to the GPL can be applied should you wish to distribute
\r
21 a combined work that includes FreeRTOS.org, without being obliged to provide
\r
22 the source code for any proprietary components. See the licensing section
\r
23 of http://www.FreeRTOS.org for full details of how and when the exception
\r
26 ***************************************************************************
\r
27 ***************************************************************************
\r
29 * SAVE TIME AND MONEY! We can port FreeRTOS.org to your own hardware, *
\r
30 * and even write all or part of your application on your behalf. *
\r
31 * See http://www.OpenRTOS.com for details of the services we provide to *
\r
32 * expedite your project. *
\r
34 ***************************************************************************
\r
35 ***************************************************************************
\r
37 Please ensure to read the configuration and relevant port sections of the
\r
38 online documentation.
\r
40 http://www.FreeRTOS.org - Documentation, latest information, license and
\r
43 http://www.SafeRTOS.com - A version that is certified for use in safety
\r
46 http://www.OpenRTOS.com - Commercial support, development, porting,
\r
47 licensing and training services.
\r
52 * Creates all the demo application tasks, then starts the scheduler. The WEB
\r
53 * documentation provides more details of the standard demo application tasks.
\r
54 * In addition to the standard demo tasks, the following tasks and tests are
\r
55 * defined and/or created within this file:
\r
57 * "Check" task - This only executes every five seconds but has a high priority
\r
58 * to ensure it gets processor time. Its main function is to check that all the
\r
59 * standard demo tasks are still operational. While no errors have been
\r
60 * discovered the check task will toggle an LED every 5 seconds - the toggle
\r
61 * rate increasing to 500ms being a visual indication that at least one task has
\r
62 * reported unexpected behaviour.
\r
64 * "Reg test" tasks - These fill the registers with known values, then check
\r
65 * that each register still contains its expected value. Each task uses
\r
66 * different values. The tasks run with very low priority so get preempted very
\r
67 * frequently. A register containing an unexpected value is indicative of an
\r
68 * error in the context switching mechanism.
\r
72 /* Standard includes. */
\r
75 /* Scheduler includes. */
\r
76 #include "FreeRTOS.h"
\r
81 /* Demo app includes. */
\r
83 #include "crflash.h"
\r
84 #include "partest.h"
\r
85 #include "semtest.h"
\r
86 #include "GenQTest.h"
\r
88 #include "comtest2.h"
\r
90 /*-----------------------------------------------------------*/
\r
92 /* The time between cycles of the 'check' functionality - as described at the
\r
93 top of this file. */
\r
94 #define mainNO_ERROR_PERIOD ( ( portTickType ) 5000 / portTICK_RATE_MS )
\r
96 /* The rate at which the LED controlled by the 'check' task will flash should an
\r
97 error have been detected. */
\r
98 #define mainERROR_PERIOD ( ( portTickType ) 500 / portTICK_RATE_MS )
\r
100 /* The LED controlled by the 'check' task. */
\r
101 #define mainCHECK_LED ( 3 )
\r
103 /* ComTest constants - there is no free LED for the comtest tasks. */
\r
104 #define mainCOM_TEST_BAUD_RATE ( ( unsigned portLONG ) 19200 )
\r
105 #define mainCOM_TEST_LED ( 5 )
\r
107 /* Task priorities. */
\r
108 #define mainCOM_TEST_PRIORITY ( tskIDLE_PRIORITY + 2 )
\r
109 #define mainCHECK_TASK_PRIORITY ( tskIDLE_PRIORITY + 3 )
\r
110 #define mainSEM_TEST_PRIORITY ( tskIDLE_PRIORITY + 1 )
\r
111 #define mainBLOCK_Q_PRIORITY ( tskIDLE_PRIORITY + 2 )
\r
112 #define mainGEN_QUEUE_TASK_PRIORITY ( tskIDLE_PRIORITY )
\r
114 /* Co-routines are used to flash the LEDs. */
\r
115 #define mainNUM_FLASH_CO_ROUTINES ( 3 )
\r
117 /* The baud rate used by the comtest tasks. */
\r
118 #define mainBAUD_RATE ( 38400 )
\r
120 /* There is no spare LED for the comtest tasks, so this is set to an invalid
\r
122 #define mainCOM_LED ( 4 )
\r
125 * Configure the hardware for the demo.
\r
127 static void prvSetupHardware( void );
\r
130 * Implements the 'check' task functionality as described at the top of this
\r
133 static void prvCheckTask( void *pvParameters );
\r
136 * Implement the 'Reg test' functionality as described at the top of this file.
\r
138 static void vRegTest1Task( void *pvParameters );
\r
139 static void vRegTest2Task( void *pvParameters );
\r
141 /*-----------------------------------------------------------*/
\r
143 /* Counters used to detect errors within the reg test tasks. */
\r
144 static volatile unsigned portLONG ulRegTest1Counter = 0x11111111, ulRegTest2Counter = 0x22222222;
\r
146 /*-----------------------------------------------------------*/
\r
150 /* Setup the hardware ready for this demo. */
\r
151 prvSetupHardware();
\r
153 /* Start the standard demo tasks. */
\r
154 vStartSemaphoreTasks( mainSEM_TEST_PRIORITY );
\r
155 vStartGenericQueueTasks( mainGEN_QUEUE_TASK_PRIORITY );
\r
156 vStartQueuePeekTasks();
\r
157 vStartBlockingQueueTasks( mainBLOCK_Q_PRIORITY );
\r
158 vAltStartComTestTasks( mainCOM_TEST_PRIORITY, mainBAUD_RATE, mainCOM_LED );
\r
160 /* For demo purposes use some co-routines to flash the LEDs. */
\r
161 vStartFlashCoRoutines( mainNUM_FLASH_CO_ROUTINES );
\r
163 /* Create the check task. */
\r
164 xTaskCreate( prvCheckTask, ( signed portCHAR * ) "Check", configMINIMAL_STACK_SIZE, NULL, mainCHECK_TASK_PRIORITY, NULL );
\r
167 /* Start the reg test tasks - defined in this file. */
\r
168 xTaskCreate( vRegTest1Task, ( signed portCHAR * ) "Reg1", configMINIMAL_STACK_SIZE, ( void * ) &ulRegTest1Counter, tskIDLE_PRIORITY, NULL );
\r
169 xTaskCreate( vRegTest2Task, ( signed portCHAR * ) "Reg2", configMINIMAL_STACK_SIZE, ( void * ) &ulRegTest2Counter, tskIDLE_PRIORITY, NULL );
\r
171 /* Start the scheduler. */
\r
172 vTaskStartScheduler();
\r
174 /* Will only get here if there was insufficient memory to create the idle
\r
180 /*-----------------------------------------------------------*/
\r
182 static void prvCheckTask( void *pvParameters )
\r
184 unsigned portLONG ulTicksToWait = mainNO_ERROR_PERIOD, ulError = 0, ulLastRegTest1Count = 0, ulLastRegTest2Count = 0;
\r
185 portTickType xLastExecutionTime;
\r
186 volatile unsigned portBASE_TYPE uxUnusedStack;
\r
188 ( void ) pvParameters;
\r
190 /* Initialise the variable used to control our iteration rate prior to
\r
192 xLastExecutionTime = xTaskGetTickCount();
\r
196 /* Wait until it is time to run the tests again. */
\r
197 vTaskDelayUntil( &xLastExecutionTime, ulTicksToWait );
\r
199 /* Has an error been found in any task? */
\r
200 if( xAreGenericQueueTasksStillRunning() != pdTRUE )
\r
205 if( xAreQueuePeekTasksStillRunning() != pdTRUE )
\r
210 if( xAreBlockingQueuesStillRunning() != pdTRUE )
\r
215 if( xAreSemaphoreTasksStillRunning() != pdTRUE )
\r
220 if( xAreComTestTasksStillRunning() != pdTRUE )
\r
225 if( ulLastRegTest1Count == ulRegTest1Counter )
\r
227 ulError |= 0x1000UL;
\r
230 if( ulLastRegTest2Count == ulRegTest2Counter )
\r
232 ulError |= 0x1000UL;
\r
235 ulLastRegTest1Count = ulRegTest1Counter;
\r
236 ulLastRegTest2Count = ulRegTest2Counter;
\r
238 /* If an error has been found then increase our cycle rate, and in so
\r
239 doing increase the rate at which the check task LED toggles. */
\r
242 ulTicksToWait = mainERROR_PERIOD;
\r
245 /* Toggle the LED each itteration. */
\r
246 vParTestToggleLED( mainCHECK_LED );
\r
248 /* For demo only - how much unused stack does this task have? */
\r
249 uxUnusedStack = uxTaskGetStackHighWaterMark( NULL );
\r
252 /*-----------------------------------------------------------*/
\r
254 void prvSetupHardware( void )
\r
256 portDISABLE_INTERRUPTS();
\r
258 /* Setup the port used to toggle LEDs. */
\r
259 vParTestInitialise();
\r
261 /*-----------------------------------------------------------*/
\r
263 void vApplicationStackOverflowHook( xTaskHandle *pxTask, signed portCHAR *pcTaskName )
\r
265 /* This will get called if a stack overflow is detected during the context
\r
266 switch. Set configCHECK_FOR_STACK_OVERFLOWS to 2 to also check for stack
\r
267 problems within nested interrupts, but only do this for debug purposes as
\r
268 it will increase the context switch time. */
\r
271 ( void ) pcTaskName;
\r
277 /*-----------------------------------------------------------*/
\r
279 void vApplicationIdleHook( void );
\r
280 void vApplicationIdleHook( void )
\r
282 /* The co-routines run in the idle task. */
\r
283 vCoRoutineSchedule();
\r
285 /*-----------------------------------------------------------*/
\r
289 /* To keep the linker happy only as the libraries have been removed from
\r
294 /*-----------------------------------------------------------*/
\r
296 static void vRegTest1Task( void *pvParameters )
\r
298 /* Sanity check - did we receive the parameter expected? */
\r
299 if( pvParameters != &ulRegTest1Counter )
\r
301 /* Change here so the check task can detect that an error occurred. */
\r
307 /* Set all the registers to known values, then check that each retains its
\r
308 expected value - as described at the top of this file. If an error is
\r
309 found then the loop counter will no longer be incremented allowing the check
\r
310 task to recognise the error. */
\r
311 asm volatile ( "reg_test_1_start: \n\t"
\r
312 " moveq #1, d0 \n\t"
\r
313 " moveq #2, d1 \n\t"
\r
314 " moveq #3, d2 \n\t"
\r
315 " moveq #4, d3 \n\t"
\r
316 " moveq #5, d4 \n\t"
\r
317 " moveq #6, d5 \n\t"
\r
318 " moveq #7, d6 \n\t"
\r
319 " moveq #8, d7 \n\t"
\r
320 " move #9, a0 \n\t"
\r
321 " move #10, a1 \n\t"
\r
322 " move #11, a2 \n\t"
\r
323 " move #12, a3 \n\t"
\r
324 " move #13, a4 \n\t"
\r
325 " move #14, a5 \n\t"
\r
326 " move #15, a6 \n\t"
\r
328 " cmpi.l #1, d0 \n\t"
\r
329 " bne reg_test_1_error \n\t"
\r
330 " cmpi.l #2, d1 \n\t"
\r
331 " bne reg_test_1_error \n\t"
\r
332 " cmpi.l #3, d2 \n\t"
\r
333 " bne reg_test_1_error \n\t"
\r
334 " cmpi.l #4, d3 \n\t"
\r
335 " bne reg_test_1_error \n\t"
\r
336 " cmpi.l #5, d4 \n\t"
\r
337 " bne reg_test_1_error \n\t"
\r
338 " cmpi.l #6, d5 \n\t"
\r
339 " bne reg_test_1_error \n\t"
\r
340 " cmpi.l #7, d6 \n\t"
\r
341 " bne reg_test_1_error \n\t"
\r
342 " cmpi.l #8, d7 \n\t"
\r
343 " bne reg_test_1_error \n\t"
\r
344 " move a0, d0 \n\t"
\r
345 " cmpi.l #9, d0 \n\t"
\r
346 " bne reg_test_1_error \n\t"
\r
347 " move a1, d0 \n\t"
\r
348 " cmpi.l #10, d0 \n\t"
\r
349 " bne reg_test_1_error \n\t"
\r
350 " move a2, d0 \n\t"
\r
351 " cmpi.l #11, d0 \n\t"
\r
352 " bne reg_test_1_error \n\t"
\r
353 " move a3, d0 \n\t"
\r
354 " cmpi.l #12, d0 \n\t"
\r
355 " bne reg_test_1_error \n\t"
\r
356 " move a4, d0 \n\t"
\r
357 " cmpi.l #13, d0 \n\t"
\r
358 " bne reg_test_1_error \n\t"
\r
359 " move a5, d0 \n\t"
\r
360 " cmpi.l #14, d0 \n\t"
\r
361 " bne reg_test_1_error \n\t"
\r
362 " move a6, d0 \n\t"
\r
363 " cmpi.l #15, d0 \n\t"
\r
364 " bne reg_test_1_error \n\t"
\r
365 " move ulRegTest1Counter, d0 \n\t"
\r
366 " addq #1, d0 \n\t"
\r
367 " move d0, ulRegTest1Counter \n\t"
\r
368 " bra reg_test_1_start \n\t"
\r
369 "reg_test_1_error: \n\t"
\r
370 " bra reg_test_1_error \n\t"
\r
373 /*-----------------------------------------------------------*/
\r
375 static void vRegTest2Task( void *pvParameters )
\r
377 /* Sanity check - did we receive the parameter expected? */
\r
378 if( pvParameters != &ulRegTest2Counter )
\r
380 /* Change here so the check task can detect that an error occurred. */
\r
386 /* Set all the registers to known values, then check that each retains its
\r
387 expected value - as described at the top of this file. If an error is
\r
388 found then the loop counter will no longer be incremented allowing the check
\r
389 task to recognise the error. */
\r
390 asm volatile ( "reg_test_2_start: \n\t"
\r
391 " moveq #10, d0 \n\t"
\r
392 " moveq #20, d1 \n\t"
\r
393 " moveq #30, d2 \n\t"
\r
394 " moveq #40, d3 \n\t"
\r
395 " moveq #50, d4 \n\t"
\r
396 " moveq #60, d5 \n\t"
\r
397 " moveq #70, d6 \n\t"
\r
398 " moveq #80, d7 \n\t"
\r
399 " move #90, a0 \n\t"
\r
400 " move #100, a1 \n\t"
\r
401 " move #110, a2 \n\t"
\r
402 " move #120, a3 \n\t"
\r
403 " move #130, a4 \n\t"
\r
404 " move #140, a5 \n\t"
\r
405 " move #150, a6 \n\t"
\r
407 " cmpi.l #10, d0 \n\t"
\r
408 " bne reg_test_2_error \n\t"
\r
409 " cmpi.l #20, d1 \n\t"
\r
410 " bne reg_test_2_error \n\t"
\r
411 " cmpi.l #30, d2 \n\t"
\r
412 " bne reg_test_2_error \n\t"
\r
413 " cmpi.l #40, d3 \n\t"
\r
414 " bne reg_test_2_error \n\t"
\r
415 " cmpi.l #50, d4 \n\t"
\r
416 " bne reg_test_2_error \n\t"
\r
417 " cmpi.l #60, d5 \n\t"
\r
418 " bne reg_test_2_error \n\t"
\r
419 " cmpi.l #70, d6 \n\t"
\r
420 " bne reg_test_2_error \n\t"
\r
421 " cmpi.l #80, d7 \n\t"
\r
422 " bne reg_test_2_error \n\t"
\r
423 " move a0, d0 \n\t"
\r
424 " cmpi.l #90, d0 \n\t"
\r
425 " bne reg_test_2_error \n\t"
\r
426 " move a1, d0 \n\t"
\r
427 " cmpi.l #100, d0 \n\t"
\r
428 " bne reg_test_2_error \n\t"
\r
429 " move a2, d0 \n\t"
\r
430 " cmpi.l #110, d0 \n\t"
\r
431 " bne reg_test_2_error \n\t"
\r
432 " move a3, d0 \n\t"
\r
433 " cmpi.l #120, d0 \n\t"
\r
434 " bne reg_test_2_error \n\t"
\r
435 " move a4, d0 \n\t"
\r
436 " cmpi.l #130, d0 \n\t"
\r
437 " bne reg_test_2_error \n\t"
\r
438 " move a5, d0 \n\t"
\r
439 " cmpi.l #140, d0 \n\t"
\r
440 " bne reg_test_2_error \n\t"
\r
441 " move a6, d0 \n\t"
\r
442 " cmpi.l #150, d0 \n\t"
\r
443 " bne reg_test_2_error \n\t"
\r
444 " move ulRegTest1Counter, d0 \n\t"
\r
445 " addq #1, d0 \n\t"
\r
446 " move d0, ulRegTest2Counter \n\t"
\r
447 " bra reg_test_2_start \n\t"
\r
448 "reg_test_2_error: \n\t"
\r
449 " bra reg_test_2_error \n\t"
\r
452 /*-----------------------------------------------------------*/
\r