2 FreeRTOS.org V5.0.4 - Copyright (C) 2003-2008 Richard Barry.
\r
4 This file is part of the FreeRTOS.org distribution.
\r
6 FreeRTOS.org is free software; you can redistribute it and/or modify
\r
7 it under the terms of the GNU General Public License as published by
\r
8 the Free Software Foundation; either version 2 of the License, or
\r
9 (at your option) any later version.
\r
11 FreeRTOS.org is distributed in the hope that it will be useful,
\r
12 but WITHOUT ANY WARRANTY; without even the implied warranty of
\r
13 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
\r
14 GNU General Public License for more details.
\r
16 You should have received a copy of the GNU General Public License
\r
17 along with FreeRTOS.org; if not, write to the Free Software
\r
18 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
\r
20 A special exception to the GPL can be applied should you wish to distribute
\r
21 a combined work that includes FreeRTOS.org, without being obliged to provide
\r
22 the source code for any proprietary components. See the licensing section
\r
23 of http://www.FreeRTOS.org for full details of how and when the exception
\r
26 ***************************************************************************
\r
27 ***************************************************************************
\r
29 * SAVE TIME AND MONEY! We can port FreeRTOS.org to your own hardware, *
\r
30 * and even write all or part of your application on your behalf. *
\r
31 * See http://www.OpenRTOS.com for details of the services we provide to *
\r
32 * expedite your project. *
\r
34 ***************************************************************************
\r
35 ***************************************************************************
\r
37 Please ensure to read the configuration and relevant port sections of the
\r
38 online documentation.
\r
40 http://www.FreeRTOS.org - Documentation, latest information, license and
\r
43 http://www.SafeRTOS.com - A version that is certified for use in safety
\r
46 http://www.OpenRTOS.com - Commercial support, development, porting,
\r
47 licensing and training services.
\r
50 #include "FreeRTOS.h"
\r
53 /* Constants used to configure the interrupts. */
\r
54 #define portPRESCALE_VALUE 64
\r
55 #define portPRESCALE_REG_SETTING ( 5 << 8 )
\r
56 #define portPIT_INTERRUPT_ENABLED ( 0x08 )
\r
57 #define configPIT0_INTERRUPT_VECTOR ( 55 )
\r
60 * FreeRTOS.org requires two interrupts - a tick interrupt generated from a
\r
61 * timer source, and a spare interrupt vector used for context switching.
\r
62 * The configuration below uses PIT0 for the former, and vector 16 for the
\r
63 * latter. **IF YOUR APPLICATION HAS BOTH OF THESE INTERRUPTS FREE THEN YOU DO
\r
64 * NOT NEED TO CHANGE ANY OF THIS CODE** - otherwise instructions are provided
\r
65 * here for using alternative interrupt sources.
\r
67 * To change the tick interrupt source:
\r
69 * 1) Modify vApplicationSetupInterrupts() below to be correct for whichever
\r
70 * peripheral is to be used to generate the tick interrupt.
\r
72 * 2) Change the name of the function __cs3_isr_interrupt_119() defined within
\r
73 * this file to be correct for the interrupt vector used by the timer peripheral.
\r
74 * The name of the function should contain the vector number, so by default vector
\r
75 * number 119 is being used.
\r
77 * 3) Make sure the tick interrupt is cleared within the interrupt handler function.
\r
78 * Currently __cs3_isr_interrupt_119() clears the PIT0 interrupt.
\r
80 * To change the spare interrupt source:
\r
82 * 1) Modify vApplicationSetupInterrupts() below to be correct for whichever
\r
83 * interrupt vector is to be used. Make sure you use a spare interrupt on interrupt
\r
84 * controller 0, otherwise the register used to request context switches will also
\r
85 * require modification. By default vector 16 is used which is free on most MCF52xxx
\r
88 * 2) Change the definition of configYIELD_INTERRUPT_VECTOR within FreeRTOSConfig.h
\r
89 * to be correct for your chosen interrupt vector.
\r
91 * 3) Change the name of the function __cs3_isr_interrupt_80() within portasm.S
\r
92 * to be correct for whichever vector number is being used. By default interrupt
\r
93 * controller 0 vector number 16 is used, which corresponds to vector number 80.
\r
95 void vApplicationSetupInterrupts( void )
\r
97 const unsigned portSHORT usCompareMatchValue = ( ( configCPU_CLOCK_HZ / portPRESCALE_VALUE ) / configTICK_RATE_HZ );
\r
99 /* Configure interrupt priority and level and unmask interrupt for PIT0. */
\r
100 MCF_INTC0_ICR55 = ( 1 | ( configKERNEL_INTERRUPT_PRIORITY << 3 ) );
\r
101 MCF_INTC0_IMRH &= ~( MCF_INTC_IMRH_INT_MASK55 );
\r
103 /* Do the same for vector 16 (interrupt controller 0). I don't think the
\r
104 write to MCF_INTC0_IMRH is actually required here but is included for
\r
106 MCF_INTC0_ICR16 = ( 0 | ( configKERNEL_INTERRUPT_PRIORITY << 3 ) );
\r
107 MCF_INTC0_IMRH &= ~( MCF_INTC_IMRH_INT_MASK16 );
\r
109 /* Configure PIT0 to generate the RTOS tick. */
\r
110 MCF_PIT0_PCSR |= MCF_PIT_PCSR_PIF;
\r
111 MCF_PIT0_PCSR = ( portPRESCALE_REG_SETTING | MCF_PIT_PCSR_PIE | MCF_PIT_PCSR_RLD | MCF_PIT_PCSR_EN );
\r
112 MCF_PIT0_PMR = usCompareMatchValue;
\r
114 /*-----------------------------------------------------------*/
\r
116 void __attribute__ ((interrupt)) __cs3_isr_interrupt_119( void )
\r
118 unsigned portLONG ulSavedInterruptMask;
\r
120 /* Clear the PIT0 interrupt. */
\r
121 MCF_PIT0_PCSR |= MCF_PIT_PCSR_PIF;
\r
123 /* Increment the RTOS tick. */
\r
124 ulSavedInterruptMask = portSET_INTERRUPT_MASK_FROM_ISR();
\r
125 vTaskIncrementTick();
\r
126 portCLEAR_INTERRUPT_MASK_FROM_ISR( ulSavedInterruptMask );
\r
128 /* If we are using the pre-emptive scheduler then also request a
\r
129 context switch as incrementing the tick could have unblocked a task. */
\r
130 #if configUSE_PREEMPTION == 1
\r