2 FreeRTOS.org V4.8.0 - Copyright (C) 2003-2008 Richard Barry.
\r
4 This file is part of the FreeRTOS.org distribution.
\r
6 FreeRTOS.org is free software; you can redistribute it and/or modify
\r
7 it under the terms of the GNU General Public License as published by
\r
8 the Free Software Foundation; either version 2 of the License, or
\r
9 (at your option) any later version.
\r
11 FreeRTOS.org is distributed in the hope that it will be useful,
\r
12 but WITHOUT ANY WARRANTY; without even the implied warranty of
\r
13 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
\r
14 GNU General Public License for more details.
\r
16 You should have received a copy of the GNU General Public License
\r
17 along with FreeRTOS.org; if not, write to the Free Software
\r
18 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
\r
20 A special exception to the GPL can be applied should you wish to distribute
\r
21 a combined work that includes FreeRTOS.org, without being obliged to provide
\r
22 the source code for any proprietary components. See the licensing section
\r
23 of http://www.FreeRTOS.org for full details of how and when the exception
\r
26 ***************************************************************************
\r
27 ***************************************************************************
\r
29 * SAVE TIME AND MONEY! Why not get us to quote to get FreeRTOS.org *
\r
30 * running on your hardware - or even write all or part of your application*
\r
31 * for you? See http://www.OpenRTOS.com for details. *
\r
33 ***************************************************************************
\r
34 ***************************************************************************
\r
36 Please ensure to read the configuration and relevant port sections of the
\r
37 online documentation.
\r
39 http://www.FreeRTOS.org - Documentation, latest information, license and
\r
42 http://www.SafeRTOS.com - A version that is certified for use in safety
\r
45 http://www.OpenRTOS.com - Commercial support, development, porting,
\r
46 licensing and training services.
\r
50 * Creates six tasks that operate on three queues as follows:
\r
52 * The first two tasks send and receive an incrementing number to/from a queue.
\r
53 * One task acts as a producer and the other as the consumer. The consumer is a
\r
54 * higher priority than the producer and is set to block on queue reads. The queue
\r
55 * only has space for one item - as soon as the producer posts a message on the
\r
56 * queue the consumer will unblock, pre-empt the producer, and remove the item.
\r
58 * The second two tasks work the other way around. Again the queue used only has
\r
59 * enough space for one item. This time the consumer has a lower priority than the
\r
60 * producer. The producer will try to post on the queue blocking when the queue is
\r
61 * full. When the consumer wakes it will remove the item from the queue, causing
\r
62 * the producer to unblock, pre-empt the consumer, and immediately re-fill the
\r
65 * The last two tasks use the same queue producer and consumer functions. This time the queue has
\r
66 * enough space for lots of items and the tasks operate at the same priority. The
\r
67 * producer will execute, placing items into the queue. The consumer will start
\r
68 * executing when either the queue becomes full (causing the producer to block) or
\r
69 * a context switch occurs (tasks of the same priority will time slice).
\r
77 + The second set of tasks were created the wrong way around. This has been
\r
84 /* Scheduler include files. */
\r
85 #include "FreeRTOS.h"
\r
89 /* Demo program include files. */
\r
92 #define blckqSTACK_SIZE configMINIMAL_STACK_SIZE
\r
93 #define blckqNUM_TASK_SETS ( 3 )
\r
95 /* Structure used to pass parameters to the blocking queue tasks. */
\r
96 typedef struct BLOCKING_QUEUE_PARAMETERS
\r
98 xQueueHandle xQueue; /*< The queue to be used by the task. */
\r
99 portTickType xBlockTime; /*< The block time to use on queue reads/writes. */
\r
100 volatile portSHORT *psCheckVariable; /*< Incremented on each successful cycle to check the task is still running. */
\r
101 } xBlockingQueueParameters;
\r
103 /* Task function that creates an incrementing number and posts it on a queue. */
\r
104 static portTASK_FUNCTION_PROTO( vBlockingQueueProducer, pvParameters );
\r
106 /* Task function that removes the incrementing number from a queue and checks that
\r
107 it is the expected number. */
\r
108 static portTASK_FUNCTION_PROTO( vBlockingQueueConsumer, pvParameters );
\r
110 /* Variables which are incremented each time an item is removed from a queue, and
\r
111 found to be the expected value.
\r
112 These are used to check that the tasks are still running. */
\r
113 static volatile portSHORT sBlockingConsumerCount[ blckqNUM_TASK_SETS ] = { ( unsigned portSHORT ) 0, ( unsigned portSHORT ) 0, ( unsigned portSHORT ) 0 };
\r
115 /* Variable which are incremented each time an item is posted on a queue. These
\r
116 are used to check that the tasks are still running. */
\r
117 static volatile portSHORT sBlockingProducerCount[ blckqNUM_TASK_SETS ] = { ( unsigned portSHORT ) 0, ( unsigned portSHORT ) 0, ( unsigned portSHORT ) 0 };
\r
119 /*-----------------------------------------------------------*/
\r
121 void vStartBlockingQueueTasks( unsigned portBASE_TYPE uxPriority )
\r
123 xBlockingQueueParameters *pxQueueParameters1, *pxQueueParameters2;
\r
124 xBlockingQueueParameters *pxQueueParameters3, *pxQueueParameters4;
\r
125 xBlockingQueueParameters *pxQueueParameters5, *pxQueueParameters6;
\r
126 const unsigned portBASE_TYPE uxQueueSize1 = 1, uxQueueSize5 = 5;
\r
127 const portTickType xBlockTime = ( portTickType ) 1000 / portTICK_RATE_MS;
\r
128 const portTickType xDontBlock = ( portTickType ) 0;
\r
130 /* Create the first two tasks as described at the top of the file. */
\r
132 /* First create the structure used to pass parameters to the consumer tasks. */
\r
133 pxQueueParameters1 = ( xBlockingQueueParameters * ) pvPortMalloc( sizeof( xBlockingQueueParameters ) );
\r
135 /* Create the queue used by the first two tasks to pass the incrementing number.
\r
136 Pass a pointer to the queue in the parameter structure. */
\r
137 pxQueueParameters1->xQueue = xQueueCreate( uxQueueSize1, ( unsigned portBASE_TYPE ) sizeof( unsigned portSHORT ) );
\r
139 /* The consumer is created first so gets a block time as described above. */
\r
140 pxQueueParameters1->xBlockTime = xBlockTime;
\r
142 /* Pass in the variable that this task is going to increment so we can check it
\r
143 is still running. */
\r
144 pxQueueParameters1->psCheckVariable = &( sBlockingConsumerCount[ 0 ] );
\r
146 /* Create the structure used to pass parameters to the producer task. */
\r
147 pxQueueParameters2 = ( xBlockingQueueParameters * ) pvPortMalloc( sizeof( xBlockingQueueParameters ) );
\r
149 /* Pass the queue to this task also, using the parameter structure. */
\r
150 pxQueueParameters2->xQueue = pxQueueParameters1->xQueue;
\r
152 /* The producer is not going to block - as soon as it posts the consumer will
\r
153 wake and remove the item so the producer should always have room to post. */
\r
154 pxQueueParameters2->xBlockTime = xDontBlock;
\r
156 /* Pass in the variable that this task is going to increment so we can check
\r
157 it is still running. */
\r
158 pxQueueParameters2->psCheckVariable = &( sBlockingProducerCount[ 0 ] );
\r
161 /* Note the producer has a lower priority than the consumer when the tasks are
\r
163 xTaskCreate( vBlockingQueueConsumer, ( signed portCHAR * ) "QConsB1", blckqSTACK_SIZE, ( void * ) pxQueueParameters1, uxPriority, NULL );
\r
164 xTaskCreate( vBlockingQueueProducer, ( signed portCHAR * ) "QProdB2", blckqSTACK_SIZE, ( void * ) pxQueueParameters2, tskIDLE_PRIORITY, NULL );
\r
168 /* Create the second two tasks as described at the top of the file. This uses
\r
169 the same mechanism but reverses the task priorities. */
\r
171 pxQueueParameters3 = ( xBlockingQueueParameters * ) pvPortMalloc( sizeof( xBlockingQueueParameters ) );
\r
172 pxQueueParameters3->xQueue = xQueueCreate( uxQueueSize1, ( unsigned portBASE_TYPE ) sizeof( unsigned portSHORT ) );
\r
173 pxQueueParameters3->xBlockTime = xDontBlock;
\r
174 pxQueueParameters3->psCheckVariable = &( sBlockingProducerCount[ 1 ] );
\r
176 pxQueueParameters4 = ( xBlockingQueueParameters * ) pvPortMalloc( sizeof( xBlockingQueueParameters ) );
\r
177 pxQueueParameters4->xQueue = pxQueueParameters3->xQueue;
\r
178 pxQueueParameters4->xBlockTime = xBlockTime;
\r
179 pxQueueParameters4->psCheckVariable = &( sBlockingConsumerCount[ 1 ] );
\r
181 xTaskCreate( vBlockingQueueConsumer, ( signed portCHAR * ) "QProdB3", blckqSTACK_SIZE, ( void * ) pxQueueParameters3, tskIDLE_PRIORITY, NULL );
\r
182 xTaskCreate( vBlockingQueueProducer, ( signed portCHAR * ) "QConsB4", blckqSTACK_SIZE, ( void * ) pxQueueParameters4, uxPriority, NULL );
\r
186 /* Create the last two tasks as described above. The mechanism is again just
\r
187 the same. This time both parameter structures are given a block time. */
\r
188 pxQueueParameters5 = ( xBlockingQueueParameters * ) pvPortMalloc( sizeof( xBlockingQueueParameters ) );
\r
189 pxQueueParameters5->xQueue = xQueueCreate( uxQueueSize5, ( unsigned portBASE_TYPE ) sizeof( unsigned portSHORT ) );
\r
190 pxQueueParameters5->xBlockTime = xBlockTime;
\r
191 pxQueueParameters5->psCheckVariable = &( sBlockingProducerCount[ 2 ] );
\r
193 pxQueueParameters6 = ( xBlockingQueueParameters * ) pvPortMalloc( sizeof( xBlockingQueueParameters ) );
\r
194 pxQueueParameters6->xQueue = pxQueueParameters5->xQueue;
\r
195 pxQueueParameters6->xBlockTime = xBlockTime;
\r
196 pxQueueParameters6->psCheckVariable = &( sBlockingConsumerCount[ 2 ] );
\r
198 xTaskCreate( vBlockingQueueProducer, ( signed portCHAR * ) "QProdB5", blckqSTACK_SIZE, ( void * ) pxQueueParameters5, tskIDLE_PRIORITY, NULL );
\r
199 xTaskCreate( vBlockingQueueConsumer, ( signed portCHAR * ) "QConsB6", blckqSTACK_SIZE, ( void * ) pxQueueParameters6, tskIDLE_PRIORITY, NULL );
\r
201 /*-----------------------------------------------------------*/
\r
203 static portTASK_FUNCTION( vBlockingQueueProducer, pvParameters )
\r
205 unsigned portSHORT usValue = 0;
\r
206 xBlockingQueueParameters *pxQueueParameters;
\r
207 portSHORT sErrorEverOccurred = pdFALSE;
\r
209 pxQueueParameters = ( xBlockingQueueParameters * ) pvParameters;
\r
213 if( xQueueSend( pxQueueParameters->xQueue, ( void * ) &usValue, pxQueueParameters->xBlockTime ) != pdPASS )
\r
215 sErrorEverOccurred = pdTRUE;
\r
219 /* We have successfully posted a message, so increment the variable
\r
220 used to check we are still running. */
\r
221 if( sErrorEverOccurred == pdFALSE )
\r
223 ( *pxQueueParameters->psCheckVariable )++;
\r
226 /* Increment the variable we are going to post next time round. The
\r
227 consumer will expect the numbers to follow in numerical order. */
\r
232 /*-----------------------------------------------------------*/
\r
234 static portTASK_FUNCTION( vBlockingQueueConsumer, pvParameters )
\r
236 unsigned portSHORT usData, usExpectedValue = 0;
\r
237 xBlockingQueueParameters *pxQueueParameters;
\r
238 portSHORT sErrorEverOccurred = pdFALSE;
\r
240 pxQueueParameters = ( xBlockingQueueParameters * ) pvParameters;
\r
244 if( xQueueReceive( pxQueueParameters->xQueue, &usData, pxQueueParameters->xBlockTime ) == pdPASS )
\r
246 if( usData != usExpectedValue )
\r
249 usExpectedValue = usData;
\r
251 sErrorEverOccurred = pdTRUE;
\r
255 /* We have successfully received a message, so increment the
\r
256 variable used to check we are still running. */
\r
257 if( sErrorEverOccurred == pdFALSE )
\r
259 ( *pxQueueParameters->psCheckVariable )++;
\r
262 /* Increment the value we expect to remove from the queue next time
\r
269 /*-----------------------------------------------------------*/
\r
271 /* This is called to check that all the created tasks are still running. */
\r
272 portBASE_TYPE xAreBlockingQueuesStillRunning( void )
\r
274 static portSHORT sLastBlockingConsumerCount[ blckqNUM_TASK_SETS ] = { ( unsigned portSHORT ) 0, ( unsigned portSHORT ) 0, ( unsigned portSHORT ) 0 };
\r
275 static portSHORT sLastBlockingProducerCount[ blckqNUM_TASK_SETS ] = { ( unsigned portSHORT ) 0, ( unsigned portSHORT ) 0, ( unsigned portSHORT ) 0 };
\r
276 portBASE_TYPE xReturn = pdPASS, xTasks;
\r
278 /* Not too worried about mutual exclusion on these variables as they are 16
\r
279 bits and we are only reading them. We also only care to see if they have
\r
282 Loop through each check variable to and return pdFALSE if any are found not
\r
283 to have changed since the last call. */
\r
285 for( xTasks = 0; xTasks < blckqNUM_TASK_SETS; xTasks++ )
\r
287 if( sBlockingConsumerCount[ xTasks ] == sLastBlockingConsumerCount[ xTasks ] )
\r
291 sLastBlockingConsumerCount[ xTasks ] = sBlockingConsumerCount[ xTasks ];
\r
294 if( sBlockingProducerCount[ xTasks ] == sLastBlockingProducerCount[ xTasks ] )
\r
298 sLastBlockingProducerCount[ xTasks ] = sBlockingProducerCount[ xTasks ];
\r