2 FreeRTOS V6.1.0 - Copyright (C) 2010 Real Time Engineers Ltd.
\r
4 ***************************************************************************
\r
8 * + New to FreeRTOS, *
\r
9 * + Wanting to learn FreeRTOS or multitasking in general quickly *
\r
10 * + Looking for basic training, *
\r
11 * + Wanting to improve your FreeRTOS skills and productivity *
\r
13 * then take a look at the FreeRTOS books - available as PDF or paperback *
\r
15 * "Using the FreeRTOS Real Time Kernel - a Practical Guide" *
\r
16 * http://www.FreeRTOS.org/Documentation *
\r
18 * A pdf reference manual is also available. Both are usually delivered *
\r
19 * to your inbox within 20 minutes to two hours when purchased between 8am *
\r
20 * and 8pm GMT (although please allow up to 24 hours in case of *
\r
21 * exceptional circumstances). Thank you for your support! *
\r
23 ***************************************************************************
\r
25 This file is part of the FreeRTOS distribution.
\r
27 FreeRTOS is free software; you can redistribute it and/or modify it under
\r
28 the terms of the GNU General Public License (version 2) as published by the
\r
29 Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
\r
30 ***NOTE*** The exception to the GPL is included to allow you to distribute
\r
31 a combined work that includes FreeRTOS without being obliged to provide the
\r
32 source code for proprietary components outside of the FreeRTOS kernel.
\r
33 FreeRTOS is distributed in the hope that it will be useful, but WITHOUT
\r
34 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
\r
35 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
\r
36 more details. You should have received a copy of the GNU General Public
\r
37 License and the FreeRTOS license exception along with FreeRTOS; if not it
\r
38 can be viewed here: http://www.freertos.org/a00114.html and also obtained
\r
39 by writing to Richard Barry, contact details for whom are available on the
\r
44 http://www.FreeRTOS.org - Documentation, latest information, license and
\r
47 http://www.SafeRTOS.com - A version that is certified for use in safety
\r
50 http://www.OpenRTOS.com - Commercial support, development, porting,
\r
51 licensing and training services.
\r
55 * The documentation page for this demo available on http://www.FreeRTOS.org
\r
56 * documents the hardware configuration required to run this demo. It also
\r
57 * provides more information on the expected demo application behaviour.
\r
59 * main() creates all the demo application tasks, then starts the scheduler.
\r
60 * A lot of the created tasks are from the pool of "standard demo" tasks. The
\r
61 * web documentation provides more details of the standard demo tasks, which
\r
62 * provide no particular functionality but do provide good examples of how to
\r
63 * use the FreeRTOS API.
\r
65 * In addition to the standard demo tasks, the following tasks, interrupts and
\r
66 * tests are defined and/or created within this file:
\r
68 * "LCD" task - The LCD task is a 'gatekeeper' task. It is the only task that
\r
69 * is permitted to access the LCD and therefore ensures access to the LCD is
\r
70 * always serialised and there are no mutual exclusion issues. When a task or
\r
71 * an interrupt wants to write to the LCD, it does not access the LCD directly
\r
72 * but instead sends the message to the LCD task. The LCD task then performs
\r
73 * the actual LCD output. This mechanism also allows interrupts to, in effect,
\r
74 * write to the LCD by sending messages to the LCD task.
\r
76 * The LCD task is also a demonstration of a 'controller' task design pattern.
\r
77 * Some tasks do not actually send a string to the LCD task directly, but
\r
78 * instead send a command that is interpreted by the LCD task. In a normal
\r
79 * application these commands can be control values or set points, in this
\r
80 * simple example the commands just result in messages being displayed on the
\r
83 * "Button Poll" task - This task polls the state of the 'up' key on the
\r
84 * joystick input device. It uses the vTaskDelay() API function to control
\r
85 * the poll rate to ensure debouncing is not necessary and that the task does
\r
86 * not use all the available CPU processing time.
\r
88 * Button Interrupt and run time stats display - The select button on the
\r
89 * joystick input device is configured to generate an external interrupt. The
\r
90 * handler for this interrupt sends a message to LCD task, which interprets the
\r
91 * message to mean, firstly write a message to the LCD, and secondly, generate
\r
92 * a table of run time statistics. The run time statistics are displayed as a
\r
93 * table that contains information on how much processing time each task has
\r
94 * been allocated since the application started to execute. This information
\r
95 * is provided both as an absolute time, and as a percentage of the total run
\r
96 * time. The information is displayed in the terminal IO window of the IAR
\r
97 * embedded workbench. The online documentation for this demo shows a screen
\r
98 * shot demonstrating where the run time stats can be viewed.
\r
100 * Idle Hook - The idle hook is a function that is called on each iteration of
\r
101 * the idle task. In this case it is used to place the processor into a low
\r
102 * power mode. Note however that this application is implemented using standard
\r
103 * components, and is therefore not optimised for low power operation. Lower
\r
104 * power consumption would be achieved by converting polling tasks into event
\r
105 * driven tasks, and slowing the tick interrupt frequency.
\r
107 * "Check" function called from the tick hook - The tick hook is called during
\r
108 * each tick interrupt. It is called from an interrupt context so must execute
\r
109 * quickly, not attempt to block, and not call any FreeRTOS API functions that
\r
110 * do not end in "FromISR". In this case the tick hook executes a 'check'
\r
111 * function. This only executes every five seconds. Its main function is to
\r
112 * check that all the standard demo tasks are still operational. Each time it
\r
113 * executes it sends a status code to the LCD task. The LCD task interprets the
\r
114 * code and displays an appropriate message - which will be PASS if no tasks
\r
115 * have reported any errors, or a message stating which task has reported an
\r
119 /* Standard includes. */
\r
122 /* Kernel includes. */
\r
123 #include "FreeRTOS.h"
\r
127 /* Demo application includes. */
\r
128 #include "partest.h"
\r
130 #include "dynamic.h"
\r
131 #include "comtest2.h"
\r
132 #include "GenQTest.h"
\r
134 /* Eval board includes. */
\r
135 #include "stm32_eval.h"
\r
136 #include "stm32l152_eval_lcd.h"
\r
138 /* The priorities assigned to the tasks. */
\r
139 #define mainFLASH_TASK_PRIORITY ( tskIDLE_PRIORITY + 1 )
\r
140 #define mainLCD_TASK_PRIORITY ( tskIDLE_PRIORITY + 1 )
\r
141 #define mainCOM_TEST_PRIORITY ( tskIDLE_PRIORITY + 2 )
\r
142 #define mainGENERIC_QUEUE_TEST_PRIORITY ( tskIDLE_PRIORITY )
\r
144 /* The length of the queue (the number of items the queue can hold) that is used
\r
145 to send messages from tasks and interrupts the the LCD task. */
\r
146 #define mainQUEUE_LENGTH ( 5 )
\r
148 /* Codes sent within messages to the LCD task so the LCD task can interpret
\r
149 exactly what the message it just received was. These are sent in the
\r
150 cMessageID member of the message structure (defined below). */
\r
151 #define mainMESSAGE_BUTTON_UP ( 1 )
\r
152 #define mainMESSAGE_BUTTON_SEL ( 2 )
\r
153 #define mainMESSAGE_STATUS ( 3 )
\r
155 /* When the cMessageID member of the message sent to the LCD task is
\r
156 mainMESSAGE_STATUS then these definitions are sent in the lMessageValue member
\r
157 of the same message and indicate what the status actually is. */
\r
158 #define mainERROR_DYNAMIC_TASKS ( pdPASS + 1 )
\r
159 #define mainERROR_COM_TEST ( pdPASS + 2 )
\r
160 #define mainERROR_GEN_QUEUE_TEST ( pdPASS + 3 )
\r
162 /* Baud rate used by the comtest tasks. */
\r
163 #define mainCOM_TEST_BAUD_RATE ( 115200 )
\r
165 /* The LED used by the comtest tasks. See the comtest.c file for more
\r
167 #define mainCOM_TEST_LED ( 3 )
\r
169 /*-----------------------------------------------------------*/
\r
172 * System configuration is performed prior to main() being called, this function
\r
173 * configures the peripherals used by the demo application.
\r
175 static void prvSetupHardware( void );
\r
178 * Definition of the LCD/controller task described in the comments at the top
\r
181 static void prvLCDTask( void *pvParameters );
\r
184 * Definition of the button poll task described in the comments at the top of
\r
187 static void vButtonPollTask( void *pvParameters );
\r
190 * Converts a status message value into an appropriate string for display on
\r
191 * the LCD. The string is written to pcBuffer.
\r
193 static void prvGenerateStatusMessage( char *pcBuffer, long lStatusValue );
\r
195 /*-----------------------------------------------------------*/
\r
197 /* The time base for the run time stats is generated by the 16 bit timer 6.
\r
198 Each time the timer overflows ulTIM6_OverflowCount is incremented. Therefore,
\r
199 when converting the total run time to a 32 bit number, the most significant two
\r
200 bytes are given by ulTIM6_OverflowCount and the least significant two bytes are
\r
201 given by the current TIM6 counter value. Care must be taken with data
\r
202 consistency when combining the two in case a timer overflow occurs as the
\r
203 value is being read. */
\r
204 unsigned long ulTIM6_OverflowCount = 0UL;
\r
206 /* The handle of the queue used to send messages from tasks and interrupts to
\r
208 static xQueueHandle xLCDQueue = NULL;
\r
210 /* The definition of each message sent from tasks and interrupts to the LCD
\r
214 char cMessageID; /* << States what the message is. */
\r
215 long lMessageValue; /* << States the message value (can be an integer, string pointer, etc. depending on the value of cMessageID. */
\r
218 /*-----------------------------------------------------------*/
\r
222 /* Configure the peripherals used by this demo application. This includes
\r
223 configuring the joystick input select button to generate interrupts. */
\r
224 prvSetupHardware();
\r
226 /* Create the queue used by tasks and interrupts to send strings to the LCD
\r
228 xLCDQueue = xQueueCreate( mainQUEUE_LENGTH, sizeof( xQueueMessage ) );
\r
230 /* If the queue could not be created then don't create any tasks that might
\r
231 attempt to use the queue. */
\r
232 if( xLCDQueue != NULL )
\r
234 /* Add the created queue to the queue registry so it can be viewed in
\r
235 the IAR FreeRTOS state viewer plug-in. */
\r
236 vQueueAddToRegistry( xLCDQueue, "LCDQueue" );
\r
238 /* Create the LCD and button poll tasks, as described at the top of this
\r
240 xTaskCreate( prvLCDTask, ( signed char * ) "LCD", configMINIMAL_STACK_SIZE, NULL, mainLCD_TASK_PRIORITY, NULL );
\r
241 xTaskCreate( vButtonPollTask, ( signed char * ) "ButPoll", configMINIMAL_STACK_SIZE, NULL, tskIDLE_PRIORITY, NULL );
\r
243 /* Create a subset of the standard demo tasks. */
\r
244 vStartDynamicPriorityTasks();
\r
245 vStartLEDFlashTasks( mainFLASH_TASK_PRIORITY );
\r
246 vAltStartComTestTasks( mainCOM_TEST_PRIORITY, mainCOM_TEST_BAUD_RATE, mainCOM_TEST_LED );
\r
247 vStartGenericQueueTasks( mainGENERIC_QUEUE_TEST_PRIORITY );
\r
249 /* Start the scheduler. */
\r
250 vTaskStartScheduler();
\r
253 /* If all is well then this line will never be reached. If it is reached
\r
254 then it is likely that there was insufficient (FreeRTOS) heap memory space
\r
255 to create the idle task. This may have been trapped by the malloc() failed
\r
256 hook function, if one is configured. */
\r
259 /*-----------------------------------------------------------*/
\r
261 static void prvLCDTask( void *pvParameters )
\r
263 xQueueMessage xReceivedMessage;
\r
264 long lLine = Line1;
\r
265 const long lFontHeight = (((sFONT *)LCD_GetFont())->Height);
\r
267 /* Buffer into which strings are formatted and placed ready for display on the
\r
268 LCD. Note this is a static variable to prevent it being allocated on the task
\r
269 stack, which is too small to hold such a variable. The stack size is configured
\r
270 when the task is created. */
\r
271 static char cBuffer[ 512 ];
\r
273 /* This function is the only function that uses printf(). If printf() is
\r
274 used from any other function then some sort of mutual exclusion on stdout
\r
277 This is also the only function that is permitted to access the LCD.
\r
279 First print out the number of bytes that remain in the FreeRTOS heap. This
\r
280 can be viewed in the terminal IO window within the IAR Embedded Workbench. */
\r
281 printf( "%d bytes of heap space remain unallocated\n", xPortGetFreeHeapSize() );
\r
285 /* Wait for a message to be received. Using portMAX_DELAY as the block
\r
286 time will result in an indefinite wait provided INCLUDE_vTaskSuspend is
\r
287 set to 1 in FreeRTOSConfig.h, therefore there is no need to check the
\r
288 function return value and the function will only return when a value
\r
289 has been received. */
\r
290 xQueueReceive( xLCDQueue, &xReceivedMessage, portMAX_DELAY );
\r
292 /* Clear the LCD if no room remains for any more text output. */
\r
293 if( lLine > Line9 )
\r
299 /* What is this message? What does it contain? */
\r
300 switch( xReceivedMessage.cMessageID )
\r
302 case mainMESSAGE_BUTTON_UP : /* The button poll task has just
\r
303 informed this task that the up
\r
304 button on the joystick input has
\r
305 been pressed or released. */
\r
306 sprintf( cBuffer, "Button up = %d", xReceivedMessage.lMessageValue );
\r
309 case mainMESSAGE_BUTTON_SEL : /* The select button interrupt
\r
310 just informed this task that the
\r
311 select button was pressed.
\r
312 Generate a table of task run time
\r
313 statistics and output this to
\r
314 the terminal IO window in the IAR
\r
315 embedded workbench. */
\r
316 printf( "\nTask\t Abs Time\t %%Time\n*****************************************" );
\r
317 vTaskGetRunTimeStats( ( signed char * ) cBuffer );
\r
320 /* Also print out a message to
\r
321 the LCD - in this case the
\r
322 pointer to the string to print
\r
323 is sent directly in the
\r
324 lMessageValue member of the
\r
325 message. This just demonstrates
\r
326 a different communication
\r
328 sprintf( cBuffer, "%s", ( char * ) xReceivedMessage.lMessageValue );
\r
331 case mainMESSAGE_STATUS : /* The tick interrupt hook
\r
332 function has just informed this
\r
333 task of the system status.
\r
334 Generate a string in accordance
\r
335 with the status value. */
\r
336 prvGenerateStatusMessage( cBuffer, xReceivedMessage.lMessageValue );
\r
339 default : sprintf( cBuffer, "Unknown message" );
\r
343 /* Output the message that was placed into the cBuffer array within the
\r
344 switch statement above. */
\r
345 LCD_DisplayStringLine( lLine, ( uint8_t * ) cBuffer );
\r
347 /* Move onto the next LCD line, ready for the next iteration of this
\r
349 lLine += lFontHeight;
\r
352 /*-----------------------------------------------------------*/
\r
354 static void prvGenerateStatusMessage( char *pcBuffer, long lStatusValue )
\r
356 /* Just a utility function to convert a status value into a meaningful
\r
357 string for output onto the LCD. */
\r
358 switch( lStatusValue )
\r
360 case pdPASS : sprintf( pcBuffer, "Task status = PASS" );
\r
362 case mainERROR_DYNAMIC_TASKS : sprintf( pcBuffer, "Error: Dynamic tasks" );
\r
364 case mainERROR_COM_TEST : sprintf( pcBuffer, "Err: loop connected?" ); /* Error in COM test - is the Loopback connector connected? */
\r
366 case mainERROR_GEN_QUEUE_TEST : sprintf( pcBuffer, "Error: Gen Q test" );
\r
368 default : sprintf( pcBuffer, "Unknown status" );
\r
372 /*-----------------------------------------------------------*/
\r
374 void EXTI9_5_IRQHandler( void )
\r
376 /* Define the message sent to the LCD task from this interrupt. */
\r
377 const xQueueMessage xMessage = { mainMESSAGE_BUTTON_SEL, ( unsigned long ) "Select Interrupt!" };
\r
378 long lHigherPriorityTaskWoken = pdFALSE;
\r
380 /* This is the interrupt handler for the joystick select button input.
\r
381 The button has been pushed, write a message to the LCD via the LCD task. */
\r
382 xQueueSendFromISR( xLCDQueue, &xMessage, &lHigherPriorityTaskWoken );
\r
384 EXTI_ClearITPendingBit( SEL_BUTTON_EXTI_LINE );
\r
386 /* If writing to xLCDQueue caused a task to unblock, and the unblocked task
\r
387 has a priority equal to or above the task that this interrupt interrupted,
\r
388 then lHigherPriorityTaskWoken will have been set to pdTRUE internally within
\r
389 xQueuesendFromISR(), and portEND_SWITCHING_ISR() will ensure that this
\r
390 interrupt returns directly to the higher priority unblocked task. */
\r
391 portEND_SWITCHING_ISR( lHigherPriorityTaskWoken );
\r
393 /*-----------------------------------------------------------*/
\r
395 void vApplicationTickHook( void )
\r
397 static unsigned long ulCounter = 0;
\r
398 static const unsigned long ulCheckFrequency = 5000UL / portTICK_RATE_MS;
\r
399 long lHigherPriorityTaskWoken = pdFALSE;
\r
401 /* Define the status message that is sent to the LCD task. By default the
\r
403 static xQueueMessage xStatusMessage = { mainMESSAGE_STATUS, pdPASS };
\r
405 /* This is called from within the tick interrupt and performs the 'check'
\r
406 functionality as described in the comments at the top of this file.
\r
408 Is it time to perform the 'check' functionality again? */
\r
410 if( ulCounter >= ulCheckFrequency )
\r
412 /* See if the standard demo tasks are executing as expected, changing
\r
413 the message that is sent to the LCD task from PASS to an error code if
\r
414 any tasks set reports an error. */
\r
415 if( xAreDynamicPriorityTasksStillRunning() != pdPASS )
\r
417 xStatusMessage.lMessageValue = mainERROR_DYNAMIC_TASKS;
\r
420 if( xAreComTestTasksStillRunning() != pdPASS )
\r
422 xStatusMessage.lMessageValue = mainERROR_COM_TEST;
\r
425 if( xAreGenericQueueTasksStillRunning() != pdPASS )
\r
427 xStatusMessage.lMessageValue = mainERROR_GEN_QUEUE_TEST;
\r
430 /* As this is the tick hook the lHigherPriorityTaskWoken parameter is not
\r
431 needed (a context switch is going to be performed anyway), but it must
\r
432 still be provided. */
\r
433 xQueueSendFromISR( xLCDQueue, &xStatusMessage, &lHigherPriorityTaskWoken );
\r
437 /*-----------------------------------------------------------*/
\r
439 static void vButtonPollTask( void *pvParameters )
\r
441 long lLastState = pdTRUE;
\r
443 xQueueMessage xMessage;
\r
445 /* This tasks performs the button polling functionality as described at the
\r
446 top of this file. */
\r
449 /* Check the button state. */
\r
450 lState = STM_EVAL_PBGetState( BUTTON_UP );
\r
451 if( lState != lLastState )
\r
453 /* The state has changed, send a message to the LCD task. */
\r
454 xMessage.cMessageID = mainMESSAGE_BUTTON_UP;
\r
455 xMessage.lMessageValue = lState;
\r
456 lLastState = lState;
\r
457 xQueueSend( xLCDQueue, &xMessage, portMAX_DELAY );
\r
460 /* Block for 10 milliseconds so this task does not utilise all the CPU
\r
461 time and debouncing of the button is not necessary. */
\r
462 vTaskDelay( 10 / portTICK_RATE_MS );
\r
465 /*-----------------------------------------------------------*/
\r
467 static void prvSetupHardware( void )
\r
469 /* Ensure that all 4 interrupt priority bits are used as the pre-emption
\r
471 NVIC_PriorityGroupConfig( NVIC_PriorityGroup_4 );
\r
473 /* Initialise the LEDs. */
\r
474 vParTestInitialise();
\r
476 /* Initialise the joystick inputs. */
\r
477 STM_EVAL_PBInit( BUTTON_UP, BUTTON_MODE_GPIO );
\r
478 STM_EVAL_PBInit( BUTTON_DOWN, BUTTON_MODE_GPIO );
\r
479 STM_EVAL_PBInit( BUTTON_LEFT, BUTTON_MODE_GPIO );
\r
480 STM_EVAL_PBInit( BUTTON_RIGHT, BUTTON_MODE_GPIO );
\r
482 /* The select button in the middle of the joystick is configured to generate
\r
483 an interrupt. The Eval board library will configure the interrupt
\r
484 priority to be the lowest priority available so the priority need not be
\r
485 set here explicitly. It is important that the priority is equal to or
\r
486 below that set by the configMAX_SYSCALL_INTERRUPT_PRIORITY value set in
\r
487 FreeRTOSConfig.h. */
\r
488 STM_EVAL_PBInit( BUTTON_SEL, BUTTON_MODE_EXTI );
\r
490 /* Initialize the LCD */
\r
491 STM32L152_LCD_Init();
\r
493 LCD_SetBackColor( Blue );
\r
494 LCD_SetTextColor( White );
\r
495 LCD_DisplayStringLine( Line0, " www.FreeRTOS.org" );
\r
497 /*-----------------------------------------------------------*/
\r
499 void vConfigureTimerForRunTimeStats( void )
\r
501 TIM_TimeBaseInitTypeDef TIM_TimeBaseStructure;
\r
502 NVIC_InitTypeDef NVIC_InitStructure;
\r
504 /* The time base for the run time stats is generated by the 16 bit timer 6.
\r
505 Each time the timer overflows ulTIM6_OverflowCount is incremented.
\r
506 Therefore, when converting the total run time to a 32 bit number, the most
\r
507 significant two bytes are given by ulTIM6_OverflowCount and the least
\r
508 significant two bytes are given by the current TIM6 counter value. Care
\r
509 must be taken with data consistency when combining the two in case a timer
\r
510 overflow occurs as the value is being read.
\r
512 The portCONFIGURE_TIMER_FOR_RUN_TIME_STATS() macro (in FreeRTOSConfig.h) is
\r
513 defined to call this function, so the kernel will call this function
\r
514 automatically at the appropriate time. */
\r
516 /* TIM6 clock enable */
\r
517 RCC_APB1PeriphClockCmd( RCC_APB1Periph_TIM6, ENABLE );
\r
519 /* The 32MHz clock divided by 5000 should tick (very) approximately every
\r
520 150uS and overflow a 16bit timer (very) approximately every 10 seconds. */
\r
521 TIM_TimeBaseStructure.TIM_Period = 65535;
\r
522 TIM_TimeBaseStructure.TIM_Prescaler = 5000;
\r
523 TIM_TimeBaseStructure.TIM_ClockDivision = TIM_CKD_DIV1;
\r
524 TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up;
\r
526 TIM_TimeBaseInit( TIM6, &TIM_TimeBaseStructure );
\r
528 /* Only interrupt on overflow events. */
\r
529 TIM6->CR1 |= TIM_CR1_URS;
\r
531 /* Enable the interrupt. */
\r
532 TIM_ITConfig( TIM6, TIM_IT_Update, ENABLE );
\r
534 /* Enable the TIM6 global Interrupt */
\r
535 NVIC_InitStructure.NVIC_IRQChannel = TIM6_IRQn;
\r
536 NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = configLIBRARY_LOWEST_INTERRUPT_PRIORITY;
\r
537 NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0x00; /* Not used as 4 bits are used for the pre-emption priority. */
\r
538 NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
\r
539 NVIC_Init(&NVIC_InitStructure);
\r
541 TIM_ClearITPendingBit( TIM6, TIM_IT_Update );
\r
542 TIM_Cmd( TIM6, ENABLE );
\r
544 /*-----------------------------------------------------------*/
\r
546 void TIM6_IRQHandler( void )
\r
548 /* Interrupt handler for TIM 6
\r
550 The time base for the run time stats is generated by the 16 bit timer 6.
\r
551 Each time the timer overflows ulTIM6_OverflowCount is incremented.
\r
552 Therefore, when converting the total run time to a 32 bit number, the most
\r
553 significant two bytes are given by ulTIM6_OverflowCount and the least
\r
554 significant two bytes are given by the current TIM6 counter value. Care
\r
555 must be taken with data consistency when combining the two in case a timer
\r
556 overflow occurs as the value is being read. */
\r
557 if( TIM_GetITStatus( TIM6, TIM_IT_Update) != RESET)
\r
559 ulTIM6_OverflowCount++;
\r
560 TIM_ClearITPendingBit( TIM6, TIM_IT_Update );
\r
563 /*-----------------------------------------------------------*/
\r
565 void vApplicationStackOverflowHook( xTaskHandle *pxTask, signed char *pcTaskName )
\r
567 ( void ) pcTaskName;
\r
570 /* Run time stack overflow checking is performed if
\r
571 configconfigCHECK_FOR_STACK_OVERFLOW is defined to 1 or 2. This hook
\r
572 function is called if a stack overflow is detected. */
\r
575 /*-----------------------------------------------------------*/
\r
577 void vApplicationMallocFailedHook( void )
\r
579 /* Called if a call to pvPortMalloc() fails because there is insufficient
\r
580 free memory available in the FreeRTOS heap. pvPortMalloc() is called
\r
581 internally by FreeRTOS API functions that create tasks, queues or
\r
585 /*-----------------------------------------------------------*/
\r
587 void vApplicationIdleHook( void )
\r
589 /* Called on each itteration of the idle task. In this case the idle task
\r
590 just enters a low(ish) power mode. */
\r
591 PWR_EnterSleepMode( PWR_Regulator_ON, PWR_SLEEPEntry_WFI );
\r