2 FreeRTOS.org V4.3.0 - Copyright (C) 2003-2007 Richard Barry.
\r
4 This file is part of the FreeRTOS.org distribution.
\r
6 FreeRTOS.org is free software; you can redistribute it and/or modify
\r
7 it under the terms of the GNU General Public License as published by
\r
8 the Free Software Foundation; either version 2 of the License, or
\r
9 (at your option) any later version.
\r
11 FreeRTOS.org is distributed in the hope that it will be useful,
\r
12 but WITHOUT ANY WARRANTY; without even the implied warranty of
\r
13 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
\r
14 GNU General Public License for more details.
\r
16 You should have received a copy of the GNU General Public License
\r
17 along with FreeRTOS.org; if not, write to the Free Software
\r
18 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
\r
20 A special exception to the GPL can be applied should you wish to distribute
\r
21 a combined work that includes FreeRTOS.org, without being obliged to provide
\r
22 the source code for any proprietary components. See the licensing section
\r
23 of http://www.FreeRTOS.org for full details of how and when the exception
\r
26 ***************************************************************************
\r
27 See http://www.FreeRTOS.org for documentation, latest information, license
\r
28 and contact details. Please ensure to read the configuration and relevant
\r
29 port sections of the online documentation.
\r
31 Also see http://www.SafeRTOS.com for an IEC 61508 compliant version along
\r
32 with commercial development and support options.
\r
33 ***************************************************************************
\r
35 #include <c8051f120.h>
\r
37 #include "FreeRTOS.h"
\r
39 #include "partest.h"
\r
41 #define partstPUSH_PULL ( ( unsigned portCHAR ) 0xff )
\r
42 #define partstALL_OUTPUTS_OFF ( ( unsigned portCHAR ) 0xff )
\r
44 /* LED to output is dependent on how the LED's are wired. */
\r
45 #define partstOUTPUT_0 ( ( unsigned portCHAR ) 0x02 )
\r
46 #define partstOUTPUT_1 ( ( unsigned portCHAR ) 0x08 )
\r
47 #define partstOUTPUT_2 ( ( unsigned portCHAR ) 0x20 )
\r
48 #define partstOUTPUT_3 ( ( unsigned portCHAR ) 0x01 )
\r
49 #define partstOUTPUT_4 ( ( unsigned portCHAR ) 0x04 )
\r
50 #define partstOUTPUT_5 ( ( unsigned portCHAR ) 0x10 )
\r
51 #define partstOUTPUT_6 ( ( unsigned portCHAR ) 0x40 )
\r
52 #define partstOUTPUT_7 ( ( unsigned portCHAR ) 0x80 )
\r
54 /*-----------------------------------------------------------
\r
55 * Simple parallel port IO routines.
\r
56 *-----------------------------------------------------------*/
\r
58 void vParTestInitialise( void )
\r
60 unsigned portCHAR ucOriginalSFRPage;
\r
62 /* Remember the SFR page before it is changed so it can get set back
\r
63 before the function exits. */
\r
64 ucOriginalSFRPage = SFRPAGE;
\r
66 /* Setup the SFR page to access the config SFR's. */
\r
67 SFRPAGE = CONFIG_PAGE;
\r
69 /* Set the on board LED to push pull. */
\r
70 P3MDOUT |= partstPUSH_PULL;
\r
72 /* Return the SFR page. */
\r
73 SFRPAGE = ucOriginalSFRPage;
\r
75 P3 = partstALL_OUTPUTS_OFF;
\r
77 /*-----------------------------------------------------------*/
\r
79 void vParTestSetLED( unsigned portBASE_TYPE uxLED, portBASE_TYPE xValue )
\r
81 portBASE_TYPE xError = pdFALSE;
\r
85 if( xValue == pdFALSE )
\r
89 case 0 : P3 |= partstOUTPUT_0;
\r
91 case 1 : P3 |= partstOUTPUT_1;
\r
93 case 2 : P3 |= partstOUTPUT_2;
\r
95 case 3 : P3 |= partstOUTPUT_3;
\r
97 case 4 : P3 |= partstOUTPUT_4;
\r
99 case 5 : P3 |= partstOUTPUT_5;
\r
101 case 6 : P3 |= partstOUTPUT_6;
\r
103 case 7 : P3 |= partstOUTPUT_7;
\r
105 default : /* There are no other LED's wired in. */
\r
114 case 0 : P3 &= ~partstOUTPUT_0;
\r
116 case 1 : P3 &= ~partstOUTPUT_1;
\r
118 case 2 : P3 &= ~partstOUTPUT_2;
\r
120 case 3 : P3 &= ~partstOUTPUT_3;
\r
122 case 4 : P3 &= ~partstOUTPUT_4;
\r
124 case 5 : P3 &= ~partstOUTPUT_5;
\r
126 case 6 : P3 &= ~partstOUTPUT_6;
\r
128 case 7 : P3 &= ~partstOUTPUT_7;
\r
130 default : /* There are no other LED's wired in. */
\r
137 /*-----------------------------------------------------------*/
\r
139 void vParTestToggleLED( unsigned portBASE_TYPE uxLED )
\r
141 unsigned portCHAR ucBit;
\r
142 portBASE_TYPE xError = pdFALSE;
\r
148 case 0 : ucBit = partstOUTPUT_0;
\r
150 case 1 : ucBit = partstOUTPUT_1;
\r
152 case 2 : ucBit = partstOUTPUT_2;
\r
154 case 3 : ucBit = partstOUTPUT_3;
\r
156 case 4 : ucBit = partstOUTPUT_4;
\r
158 case 5 : ucBit = partstOUTPUT_5;
\r
160 case 6 : ucBit = partstOUTPUT_6;
\r
162 case 7 : ucBit = partstOUTPUT_7;
\r
164 default : /* There are no other LED's wired in. */
\r
169 if( xError != pdTRUE )
\r