2 FreeRTOS.org V4.7.0 - Copyright (C) 2003-2007 Richard Barry.
\r
4 This file is part of the FreeRTOS.org distribution.
\r
6 FreeRTOS.org is free software; you can redistribute it and/or modify
\r
7 it under the terms of the GNU General Public License as published by
\r
8 the Free Software Foundation; either version 2 of the License, or
\r
9 (at your option) any later version.
\r
11 FreeRTOS.org is distributed in the hope that it will be useful,
\r
12 but WITHOUT ANY WARRANTY; without even the implied warranty of
\r
13 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
\r
14 GNU General Public License for more details.
\r
16 You should have received a copy of the GNU General Public License
\r
17 along with FreeRTOS.org; if not, write to the Free Software
\r
18 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
\r
20 A special exception to the GPL can be applied should you wish to distribute
\r
21 a combined work that includes FreeRTOS.org, without being obliged to provide
\r
22 the source code for any proprietary components. See the licensing section
\r
23 of http://www.FreeRTOS.org for full details of how and when the exception
\r
26 ***************************************************************************
\r
27 See http://www.FreeRTOS.org for documentation, latest information, license
\r
28 and contact details. Please ensure to read the configuration and relevant
\r
29 port sections of the online documentation.
\r
31 Also see http://www.SafeRTOS.com a version that has been certified for use
\r
32 in safety critical systems, plus commercial licensing, development and
\r
34 ***************************************************************************
\r
36 #include <c8051f120.h>
\r
38 #include "FreeRTOS.h"
\r
40 #include "partest.h"
\r
42 #define partstPUSH_PULL ( ( unsigned portCHAR ) 0xff )
\r
43 #define partstALL_OUTPUTS_OFF ( ( unsigned portCHAR ) 0xff )
\r
45 /* LED to output is dependent on how the LED's are wired. */
\r
46 #define partstOUTPUT_0 ( ( unsigned portCHAR ) 0x02 )
\r
47 #define partstOUTPUT_1 ( ( unsigned portCHAR ) 0x08 )
\r
48 #define partstOUTPUT_2 ( ( unsigned portCHAR ) 0x20 )
\r
49 #define partstOUTPUT_3 ( ( unsigned portCHAR ) 0x01 )
\r
50 #define partstOUTPUT_4 ( ( unsigned portCHAR ) 0x04 )
\r
51 #define partstOUTPUT_5 ( ( unsigned portCHAR ) 0x10 )
\r
52 #define partstOUTPUT_6 ( ( unsigned portCHAR ) 0x40 )
\r
53 #define partstOUTPUT_7 ( ( unsigned portCHAR ) 0x80 )
\r
55 /*-----------------------------------------------------------
\r
56 * Simple parallel port IO routines.
\r
57 *-----------------------------------------------------------*/
\r
59 void vParTestInitialise( void )
\r
61 unsigned portCHAR ucOriginalSFRPage;
\r
63 /* Remember the SFR page before it is changed so it can get set back
\r
64 before the function exits. */
\r
65 ucOriginalSFRPage = SFRPAGE;
\r
67 /* Setup the SFR page to access the config SFR's. */
\r
68 SFRPAGE = CONFIG_PAGE;
\r
70 /* Set the on board LED to push pull. */
\r
71 P3MDOUT |= partstPUSH_PULL;
\r
73 /* Return the SFR page. */
\r
74 SFRPAGE = ucOriginalSFRPage;
\r
76 P3 = partstALL_OUTPUTS_OFF;
\r
78 /*-----------------------------------------------------------*/
\r
80 void vParTestSetLED( unsigned portBASE_TYPE uxLED, portBASE_TYPE xValue )
\r
82 portBASE_TYPE xError = pdFALSE;
\r
86 if( xValue == pdFALSE )
\r
90 case 0 : P3 |= partstOUTPUT_0;
\r
92 case 1 : P3 |= partstOUTPUT_1;
\r
94 case 2 : P3 |= partstOUTPUT_2;
\r
96 case 3 : P3 |= partstOUTPUT_3;
\r
98 case 4 : P3 |= partstOUTPUT_4;
\r
100 case 5 : P3 |= partstOUTPUT_5;
\r
102 case 6 : P3 |= partstOUTPUT_6;
\r
104 case 7 : P3 |= partstOUTPUT_7;
\r
106 default : /* There are no other LED's wired in. */
\r
115 case 0 : P3 &= ~partstOUTPUT_0;
\r
117 case 1 : P3 &= ~partstOUTPUT_1;
\r
119 case 2 : P3 &= ~partstOUTPUT_2;
\r
121 case 3 : P3 &= ~partstOUTPUT_3;
\r
123 case 4 : P3 &= ~partstOUTPUT_4;
\r
125 case 5 : P3 &= ~partstOUTPUT_5;
\r
127 case 6 : P3 &= ~partstOUTPUT_6;
\r
129 case 7 : P3 &= ~partstOUTPUT_7;
\r
131 default : /* There are no other LED's wired in. */
\r
138 /*-----------------------------------------------------------*/
\r
140 void vParTestToggleLED( unsigned portBASE_TYPE uxLED )
\r
142 unsigned portCHAR ucBit;
\r
143 portBASE_TYPE xError = pdFALSE;
\r
149 case 0 : ucBit = partstOUTPUT_0;
\r
151 case 1 : ucBit = partstOUTPUT_1;
\r
153 case 2 : ucBit = partstOUTPUT_2;
\r
155 case 3 : ucBit = partstOUTPUT_3;
\r
157 case 4 : ucBit = partstOUTPUT_4;
\r
159 case 5 : ucBit = partstOUTPUT_5;
\r
161 case 6 : ucBit = partstOUTPUT_6;
\r
163 case 7 : ucBit = partstOUTPUT_7;
\r
165 default : /* There are no other LED's wired in. */
\r
170 if( xError != pdTRUE )
\r