2 FreeRTOS.org V4.7.2 - Copyright (C) 2003-2008 Richard Barry.
\r
4 This file is part of the FreeRTOS.org distribution.
\r
6 FreeRTOS.org is free software; you can redistribute it and/or modify
\r
7 it under the terms of the GNU General Public License as published by
\r
8 the Free Software Foundation; either version 2 of the License, or
\r
9 (at your option) any later version.
\r
11 FreeRTOS.org is distributed in the hope that it will be useful,
\r
12 but WITHOUT ANY WARRANTY; without even the implied warranty of
\r
13 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
\r
14 GNU General Public License for more details.
\r
16 You should have received a copy of the GNU General Public License
\r
17 along with FreeRTOS.org; if not, write to the Free Software
\r
18 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
\r
20 A special exception to the GPL can be applied should you wish to distribute
\r
21 a combined work that includes FreeRTOS.org, without being obliged to provide
\r
22 the source code for any proprietary components. See the licensing section
\r
23 of http://www.FreeRTOS.org for full details of how and when the exception
\r
26 ***************************************************************************
\r
28 Please ensure to read the configuration and relevant port sections of the
\r
29 online documentation.
\r
31 +++ http://www.FreeRTOS.org +++
\r
32 Documentation, latest information, license and contact details.
\r
34 +++ http://www.SafeRTOS.com +++
\r
35 A version that is certified for use in safety critical systems.
\r
37 +++ http://www.OpenRTOS.com +++
\r
38 Commercial support, development, porting, licensing and training services.
\r
40 ***************************************************************************
\r
44 * Creates all the demo application tasks, then starts the scheduler.
\r
46 * Main. c also creates a task called "Print". This only executes every five
\r
47 * seconds but has the highest priority so is guaranteed to get processor time.
\r
48 * Its main function is to check that all the other tasks are still operational.
\r
49 * Nearly all the tasks in the demo application maintain a unique count that is
\r
50 * incremented each time the task successfully completes its function. Should any
\r
51 * error occur within the task the count is permanently halted. The print task
\r
52 * checks the count of each task to ensure it has changed since the last time the
\r
53 * print task executed. If any count is found not to have changed the print task
\r
54 * displays an appropriate message, halts, and flashes the on board LED rapidly.
\r
55 * If all the tasks are still incrementing their unique counts the print task
\r
56 * displays an "OK" message.
\r
58 * The LED flash tasks do not maintain a count as they already provide visual
\r
59 * feedback of their status.
\r
61 * The print task blocks on the queue into which messages that require displaying
\r
62 * are posted. It will therefore only block for the full 5 seconds if no messages
\r
63 * are posted onto the queue.
\r
65 * Main. c also provides a demonstration of how the trace visualisation utility can
\r
66 * be used, and how the scheduler can be stopped.
\r
68 * On the Flashlite it is preferable not to try to write to the console during
\r
69 * real time operation. The built in LED is toggled every cycle of the print task
\r
70 * that does not encounter any errors, so the console IO may be removed if required.
\r
71 * The build in LED will start flashing rapidly if any task reports an error.
\r
77 + Previously, if an error occurred in a task the on board LED was stopped from
\r
78 toggling. Now if an error occurs the check task enters an infinite loop,
\r
79 toggling the LED rapidly.
\r
83 + The integer and comtest tasks are now used when the cooperative scheduler
\r
84 is being used. Previously they were only used with the preemptive
\r
89 + Made the communications RX task a higher priority.
\r
93 + Delay periods are now specified using variables and constants of
\r
94 portTickType rather than unsigned portLONG.
\r
99 #include "FreeRTOS.h"
\r
101 #include "partest.h"
\r
102 #include "serial.h"
\r
104 /* Demo file headers. */
\r
105 #include "BlockQ.h"
\r
109 #include "integer.h"
\r
111 #include "comtest.h"
\r
112 #include "fileio.h"
\r
113 #include "semtest.h"
\r
115 /* Priority definitions for all the tasks in the demo application. */
\r
116 #define mainLED_TASK_PRIORITY ( tskIDLE_PRIORITY + 1 )
\r
117 #define mainCREATOR_TASK_PRIORITY ( tskIDLE_PRIORITY + 3 )
\r
118 #define mainPRINT_TASK_PRIORITY ( tskIDLE_PRIORITY + 5 )
\r
119 #define mainQUEUE_POLL_PRIORITY ( tskIDLE_PRIORITY + 2 )
\r
120 #define mainQUEUE_BLOCK_PRIORITY ( tskIDLE_PRIORITY + 3 )
\r
121 #define mainCOM_TEST_PRIORITY ( tskIDLE_PRIORITY + 3 )
\r
122 #define mainSEMAPHORE_TASK_PRIORITY ( tskIDLE_PRIORITY + 1 )
\r
124 #define mainPRINT_STACK_SIZE ( ( unsigned portSHORT ) 256 )
\r
125 #define mainDEBUG_LOG_BUFFER_SIZE ( ( unsigned portSHORT ) 20480 )
\r
127 /* Constant definitions for accessing the build in LED on the Flashlite 186. */
\r
128 #define mainLED_REG_DIR ( ( unsigned portSHORT ) 0xff78 )
\r
129 #define mainLED_REG ( ( unsigned portSHORT ) 0xff7a )
\r
131 /* If an error is detected in a task then the vErrorChecks() task will enter
\r
132 an infinite loop flashing the LED at this rate. */
\r
133 #define mainERROR_FLASH_RATE ( ( portTickType ) 100 / portTICK_RATE_MS )
\r
135 /* Task function for the "Print" task as described at the top of the file. */
\r
136 static void vErrorChecks( void *pvParameters );
\r
138 /* Function that checks the unique count of all the other tasks as described at
\r
139 the top of the file. */
\r
140 static void prvCheckOtherTasksAreStillRunning( void );
\r
142 /* Functions to setup and use the built in LED on the Flashlite 186 board. */
\r
143 static void prvToggleLED( void );
\r
144 static void prvInitLED( void );
\r
146 /* Key presses can be used to start/stop the trace visualisation utility or stop
\r
148 static void prvCheckForKeyPresses( void );
\r
150 /* Buffer used by the trace visualisation utility. */
\r
151 static portCHAR pcWriteBuffer[ mainDEBUG_LOG_BUFFER_SIZE ];
\r
153 /*-----------------------------------------------------------*/
\r
154 portSHORT main( void )
\r
156 /* Initialise hardware and utilities. */
\r
157 vParTestInitialise();
\r
158 vPrintInitialise();
\r
161 /* CREATE ALL THE DEMO APPLICATION TASKS. */
\r
163 vStartComTestTasks( mainCOM_TEST_PRIORITY, serCOM2, ser38400 );
\r
164 vStartIntegerMathTasks( tskIDLE_PRIORITY );
\r
165 vStartPolledQueueTasks( mainQUEUE_POLL_PRIORITY );
\r
166 vStartBlockingQueueTasks( mainQUEUE_BLOCK_PRIORITY );
\r
167 vStartLEDFlashTasks( mainLED_TASK_PRIORITY );
\r
168 vStartSemaphoreTasks( mainSEMAPHORE_TASK_PRIORITY );
\r
170 /* Create the "Print" task as described at the top of the file. */
\r
171 xTaskCreate( vErrorChecks, "Print", mainPRINT_STACK_SIZE, NULL, mainPRINT_TASK_PRIORITY, NULL );
\r
173 /* This task has to be created last as it keeps account of the number of tasks
\r
174 it expects to see running. */
\r
175 vCreateSuicidalTasks( mainCREATOR_TASK_PRIORITY );
\r
177 /* Set the scheduler running. This function will not return unless a task
\r
178 calls vTaskEndScheduler(). */
\r
179 vTaskStartScheduler();
\r
183 /*-----------------------------------------------------------*/
\r
185 static void vErrorChecks( void *pvParameters )
\r
187 portTickType xExpectedWakeTime;
\r
188 const portTickType xPrintRate = ( portTickType ) 5000 / portTICK_RATE_MS;
\r
189 const portLONG lMaxAllowableTimeDifference = ( portLONG ) 0;
\r
190 portTickType xWakeTime;
\r
191 portLONG lTimeDifference;
\r
192 const portCHAR *pcReceivedMessage;
\r
193 const portCHAR * const pcTaskBlockedTooLongMsg = "Print task blocked too long!\r\n";
\r
195 /* Stop warnings. */
\r
196 ( void ) pvParameters;
\r
198 /* Loop continuously, blocking, then checking all the other tasks are still
\r
199 running, before blocking once again. This task blocks on the queue of messages
\r
200 that require displaying so will wake either by its time out expiring, or a
\r
201 message becoming available. */
\r
204 /* Calculate the time we will unblock if no messages are received
\r
205 on the queue. This is used to check that we have not blocked for too long. */
\r
206 xExpectedWakeTime = xTaskGetTickCount();
\r
207 xExpectedWakeTime += xPrintRate;
\r
209 /* Block waiting for either a time out or a message to be posted that
\r
210 required displaying. */
\r
211 pcReceivedMessage = pcPrintGetNextMessage( xPrintRate );
\r
213 /* Was a message received? */
\r
214 if( pcReceivedMessage == NULL )
\r
216 /* A message was not received so we timed out, did we unblock at the
\r
218 xWakeTime = xTaskGetTickCount();
\r
220 /* Calculate the difference between the time we unblocked and the
\r
221 time we should have unblocked. */
\r
222 if( xWakeTime > xExpectedWakeTime )
\r
224 lTimeDifference = ( portLONG ) ( xWakeTime - xExpectedWakeTime );
\r
228 lTimeDifference = ( portLONG ) ( xExpectedWakeTime - xWakeTime );
\r
231 if( lTimeDifference > lMaxAllowableTimeDifference )
\r
233 /* We blocked too long - create a message that will get
\r
234 printed out the next time around. */
\r
235 vPrintDisplayMessage( &pcTaskBlockedTooLongMsg );
\r
238 /* Check the other tasks are still running, just in case. */
\r
239 prvCheckOtherTasksAreStillRunning();
\r
243 /* We unblocked due to a message becoming available. Send the message
\r
245 vDisplayMessage( pcReceivedMessage );
\r
248 /* Key presses are used to invoke the trace visualisation utility, or
\r
249 end the program. */
\r
250 prvCheckForKeyPresses();
\r
252 } /*lint !e715 !e818 pvParameters is not used but all task functions must take this form. */
\r
253 /*-----------------------------------------------------------*/
\r
255 static void prvCheckForKeyPresses( void )
\r
262 taskENTER_CRITICAL();
\r
264 taskEXIT_CRITICAL();
\r
268 unsigned portLONG ulBufferLength;
\r
270 /* Key presses can be used to start/stop the trace utility, or end the
\r
275 /* Only define keys for turning on and off the trace if the trace
\r
277 #if configUSE_TRACE_FACILITY == 1
\r
278 case 't' : vTaskList( pcWriteBuffer );
\r
279 vWriteMessageToDisk( pcWriteBuffer );
\r
282 case 's' : vTaskStartTrace( pcWriteBuffer, mainDEBUG_LOG_BUFFER_SIZE );
\r
285 case 'e' : ulBufferLength = ulTaskEndTrace();
\r
286 vWriteBufferToDisk( pcWriteBuffer, ulBufferLength );
\r
290 default : vTaskEndScheduler();
\r
296 ( void ) pcWriteBuffer;
\r
299 /*-----------------------------------------------------------*/
\r
301 static void prvCheckOtherTasksAreStillRunning( void )
\r
303 portSHORT sErrorHasOccurred = pdFALSE;
\r
305 if( xAreComTestTasksStillRunning() != pdTRUE )
\r
307 vDisplayMessage( "Com test count unchanged!\r\n" );
\r
308 sErrorHasOccurred = pdTRUE;
\r
311 if( xAreIntegerMathsTaskStillRunning() != pdTRUE )
\r
313 vDisplayMessage( "Integer maths task count unchanged!\r\n" );
\r
314 sErrorHasOccurred = pdTRUE;
\r
317 if( xAreBlockingQueuesStillRunning() != pdTRUE )
\r
319 vDisplayMessage( "Blocking queues count unchanged!\r\n" );
\r
320 sErrorHasOccurred = pdTRUE;
\r
323 if( xArePollingQueuesStillRunning() != pdTRUE )
\r
325 vDisplayMessage( "Polling queue count unchanged!\r\n" );
\r
326 sErrorHasOccurred = pdTRUE;
\r
329 if( xIsCreateTaskStillRunning() != pdTRUE )
\r
331 vDisplayMessage( "Incorrect number of tasks running!\r\n" );
\r
332 sErrorHasOccurred = pdTRUE;
\r
335 if( xAreSemaphoreTasksStillRunning() != pdTRUE )
\r
337 vDisplayMessage( "Semaphore take count unchanged!\r\n" );
\r
338 sErrorHasOccurred = pdTRUE;
\r
341 if( sErrorHasOccurred == pdFALSE )
\r
343 vDisplayMessage( "OK " );
\r
344 /* Toggle the LED if everything is okay so we know if an error occurs even if not
\r
345 using console IO. */
\r
352 /* An error has occurred in one of the tasks. Don't go any further and
\r
353 flash the LED rapidly in case console IO is not being used. */
\r
355 vTaskDelay( mainERROR_FLASH_RATE );
\r
359 /*-----------------------------------------------------------*/
\r
361 static void prvInitLED( void )
\r
363 unsigned portSHORT usPortDirection;
\r
364 const unsigned portSHORT usLEDOut = 0x400;
\r
366 /* Set the LED bit to an output. */
\r
368 usPortDirection = inpw( mainLED_REG_DIR );
\r
369 usPortDirection &= ~usLEDOut;
\r
370 outpw( mainLED_REG_DIR, usPortDirection );
\r
372 /*-----------------------------------------------------------*/
\r
374 static void prvToggleLED( void )
\r
376 static portSHORT sLED = pdTRUE;
\r
377 unsigned portSHORT usLEDState;
\r
378 const unsigned portSHORT usLEDBit = 0x400;
\r
380 /* Flip the state of the LED. */
\r
381 usLEDState = inpw( mainLED_REG );
\r
384 usLEDState &= ~usLEDBit;
\r
388 usLEDState |= usLEDBit;
\r
390 outpw( mainLED_REG, usLEDState );
\r