1 =============================================================================
\r
2 List of methods in project: RTOSDemo
\r
4 THIS TEXT DESCRIPTION IS GENERATED BY THE TOOL. DO NOT MODIFY IT.
\r
5 =============================================================================
\r
7 Module "Byte1" (bean ByteIO)
\r
8 Byte1_PutBit -Put the specified value to the specified bit/pin of the Input/Output bean. If direction is [input] saves the
\r
9 value to a memory or a register, this value will be written to the pin after switching to the output mode -
\r
10 using [SetDir(TRUE)]. If direction is [output] writes the value to the pin.
\r
11 Byte1_NegBit -Negate (invert) the specified bit of the Input/Output bean. It is the same as [PutBit(Bit,!GetBit(Bit))].
\r
13 Module "TickTimer" (bean TimerInt)
\r
14 TickTimer_Enable -Enable the bean - it starts the timer. Events may be generated ("DisableEvent"/"EnableEvent").
\r
15 TickTimer_SetFreqHz -This method sets the new frequency of the generated events. The frequency is expressed in [Hz] as a
\r
16 16-bit unsigned integer number. This method is available only if runtime setting type 'from interval' is
\r
17 selected in the <Timing dialog box> in Runtime setting area.
\r
19 Module "ButtonInterrupt" (bean ExtInt)
\r
20 ButtonInterrupt_Enable -Enable the bean - the external events are accepted.
\r
22 Module "Cpu" (bean MC9S12C32_80)
\r
23 Cpu_EnableInt -Enable maskable interrupts
\r
24 Cpu_DisableInt -Disable maskable interrupts
\r
25 Cpu_SetWaitMode -Set low power mode - Wait mode.
\r
26 For more information about the wait mode see documentation of this CPU.
\r
28 Release from Wait mode: Reset or interrupt
\r
29 Cpu_SetStopMode -Set low power mode - Stop mode.
\r
30 For more information about the stop mode see documentation of this CPU.
\r
32 =============================================================================
\r