1 /** ###################################################################
\r
2 ** THIS BEAN MODULE IS GENERATED BY THE TOOL. DO NOT MODIFY IT.
\r
3 ** Filename : PE_Error.H
\r
4 ** Project : RTOSDemo
\r
5 ** Processor : MC9S12DP256BCPV
\r
6 ** Beantype : PE_Error
\r
7 ** Version : Driver 01.00
\r
8 ** Compiler : Metrowerks HC12 C Compiler
\r
9 ** Date/Time : 13/06/2005, 20:14
\r
11 ** This bean "PE_Error" contains internal definitions
\r
12 ** of the error constants.
\r
15 ** No public methods
\r
17 ** (c) Copyright UNIS, spol. s r.o. 1997-2002
\r
18 ** UNIS, spol. s r.o.
\r
22 ** http : www.processorexpert.com
\r
23 ** mail : info@processorexpert.com
\r
24 ** ###################################################################*/
\r
26 #ifndef __PE_Error_H
\r
27 #define __PE_Error_H
\r
29 #define ERR_OK 0 /* OK */
\r
30 #define ERR_SPEED 1 /* This device does not work in the active speed mode. */
\r
31 #define ERR_RANGE 2 /* Parameter out of range. */
\r
32 #define ERR_VALUE 3 /* Parameter of incorrect value. */
\r
33 #define ERR_OVERFLOW 4 /* Timer overflow. */
\r
34 #define ERR_MATH 5 /* Overflow during evaluation. */
\r
35 #define ERR_ENABLED 6 /* Device is enabled. */
\r
36 #define ERR_DISABLED 7 /* Device is disabled. */
\r
37 #define ERR_BUSY 8 /* Device is busy. */
\r
38 #define ERR_NOTAVAIL 9 /* Requested value or method not available. */
\r
39 #define ERR_RXEMPTY 10 /* No data in receiver. */
\r
40 #define ERR_TXFULL 11 /* Transmitter is full. */
\r
41 #define ERR_BUSOFF 12 /* Bus not available. */
\r
42 #define ERR_OVERRUN 13 /* Overrun error is detected. */
\r
43 #define ERR_FRAMING 14 /* Framing error is detected. */
\r
44 #define ERR_PARITY 15 /* Parity error is detected. */
\r
45 #define ERR_NOISE 16 /* Noise error is detected. */
\r
46 #define ERR_IDLE 17 /* Idle error is detectes. */
\r
47 #define ERR_FAULT 18 /* Fault error is detected. */
\r
48 #define ERR_BREAK 19 /* Break char is received during communication. */
\r
49 #define ERR_CRC 20 /* CRC error is detected. */
\r
50 #define ERR_ARBITR 21 /* A node losts arbitration. This error occurs if two nodes start transmission at the same time. */
\r
51 #define ERR_PROTECT 22 /* Protection error is detected. */
\r
53 #endif //__PE_Error_H
\r