2 FreeRTOS.org V5.2.0 - Copyright (C) 2003-2009 Richard Barry.
\r
4 This file is part of the FreeRTOS.org distribution.
\r
6 FreeRTOS.org is free software; you can redistribute it and/or modify it
\r
7 under the terms of the GNU General Public License (version 2) as published
\r
8 by the Free Software Foundation and modified by the FreeRTOS exception.
\r
10 FreeRTOS.org is distributed in the hope that it will be useful, but WITHOUT
\r
11 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
\r
12 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
\r
15 You should have received a copy of the GNU General Public License along
\r
16 with FreeRTOS.org; if not, write to the Free Software Foundation, Inc., 59
\r
17 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
\r
19 A special exception to the GPL is included to allow you to distribute a
\r
20 combined work that includes FreeRTOS.org without being obliged to provide
\r
21 the source code for any proprietary components. See the licensing section
\r
22 of http://www.FreeRTOS.org for full details.
\r
25 ***************************************************************************
\r
27 * Get the FreeRTOS eBook! See http://www.FreeRTOS.org/Documentation *
\r
29 * This is a concise, step by step, 'hands on' guide that describes both *
\r
30 * general multitasking concepts and FreeRTOS specifics. It presents and *
\r
31 * explains numerous examples that are written using the FreeRTOS API. *
\r
32 * Full source code for all the examples is provided in an accompanying *
\r
35 ***************************************************************************
\r
39 Please ensure to read the configuration and relevant port sections of the
\r
40 online documentation.
\r
42 http://www.FreeRTOS.org - Documentation, latest information, license and
\r
45 http://www.SafeRTOS.com - A version that is certified for use in safety
\r
48 http://www.OpenRTOS.com - Commercial support, development, porting,
\r
49 licensing and training services.
\r
52 #ifndef FREERTOS_CONFIG_H
\r
53 #define FREERTOS_CONFIG_H
\r
55 #include "mb96356rs.h"
\r
58 * The below define should be same as the option selected by the Memory
\r
59 * Model (Project->Setup Project->C Compiler->Category->Target Depend )
\r
61 * Valid settings here include:
\r
62 * ------- Memory models --------- Data Code
\r
63 * portSMALL 16 Bit 16 Bit
\r
64 * portMEDIUM 16 Bit 24 Bit
\r
65 * portCOMPACT 24 Bit 16 Bit
\r
66 * portLARGE 24 Bit 24 Bit
\r
68 #define configMEMMODEL portMEDIUM
\r
70 /* Demo specific definition - set this to 1 if you want to include the task
\r
71 that writes trace and debug information to the UART. If it is set to 0 then
\r
72 the ComTest tasks will be included in place of the trace task. */
\r
73 #define INCLUDE_TraceListTasks 0
\r
75 /*-----------------------------------------------------------
\r
76 * Application specific definitions.
\r
78 * These definitions should be adjusted for your particular hardware and
\r
79 * application requirements.
\r
81 * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
\r
82 * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE.
\r
83 *----------------------------------------------------------*/
\r
84 #define configUSE_PREEMPTION 1
\r
85 #define configUSE_IDLE_HOOK 0
\r
86 #define configUSE_TICK_HOOK 0
\r
87 #define configMINIMAL_STACK_SIZE ( ( unsigned portSHORT ) 180 ) /* This can be greatly reduced when using the small or medium memory model. */
\r
88 #define configCPU_CLOCK_HZ ( ( unsigned portLONG ) 56000000 ) /* Clock setup from start.asm in the demo application. */
\r
89 #define configCLKP1_CLOCK_HZ ( ( unsigned portLONG ) 56000000 ) /* Clock setup from start.asm in the demo application. */
\r
90 #define configTICK_RATE_HZ ( (portTickType) 1000 )
\r
91 #define configMAX_PRIORITIES ( ( unsigned portBASE_TYPE ) 6 )
\r
92 #define configTOTAL_HEAP_SIZE ( (size_t) (5000) )
\r
93 #define configMAX_TASK_NAME_LEN ( 20 )
\r
94 #define configUSE_16_BIT_TICKS 1
\r
95 #define configIDLE_SHOULD_YIELD 1
\r
96 #define configUSE_MUTEXES 1
\r
97 #define configUSE_TRACE_FACILITY 0
\r
98 #define configCHECK_FOR_STACK_OVERFLOW 0
\r
100 /* Co-routine definitions. */
\r
101 #define configUSE_CO_ROUTINES 1
\r
102 #define configMAX_CO_ROUTINE_PRIORITIES ( 2 )
\r
104 /* Set the following definitions to 1 to include the API function, or zero
\r
105 to exclude the API function. */
\r
106 #define INCLUDE_vTaskPrioritySet 0
\r
107 #define INCLUDE_uxTaskPriorityGet 0
\r
108 #define INCLUDE_vTaskDelete 0
\r
109 #define INCLUDE_vTaskCleanUpResources 0
\r
110 #define INCLUDE_vTaskSuspend 1
\r
111 #define INCLUDE_vResumeFromISR 0
\r
112 #define INCLUDE_vTaskDelayUntil 1
\r
113 #define INCLUDE_vTaskDelay 1
\r
114 #define INCLUDE_xTaskGetSchedulerState 0
\r
115 #define INCLUDE_xTaskGetCurrentTaskHandle 0
\r
118 #define configKERNEL_INTERRUPT_PRIORITY 6
\r
120 /* Passed into the Dice tasks to let then know if they are controlling the
\r
121 display on the left side or the right side. */
\r
122 #define configLEFT_DISPLAY 0
\r
123 #define configRIGHT_DISPLAY 1
\r
125 #endif /* FREERTOS_CONFIG_H */
\r