2 FreeRTOS V6.1.0 - Copyright (C) 2010 Real Time Engineers Ltd.
\r
4 ***************************************************************************
\r
8 * + New to FreeRTOS, *
\r
9 * + Wanting to learn FreeRTOS or multitasking in general quickly *
\r
10 * + Looking for basic training, *
\r
11 * + Wanting to improve your FreeRTOS skills and productivity *
\r
13 * then take a look at the FreeRTOS books - available as PDF or paperback *
\r
15 * "Using the FreeRTOS Real Time Kernel - a Practical Guide" *
\r
16 * http://www.FreeRTOS.org/Documentation *
\r
18 * A pdf reference manual is also available. Both are usually delivered *
\r
19 * to your inbox within 20 minutes to two hours when purchased between 8am *
\r
20 * and 8pm GMT (although please allow up to 24 hours in case of *
\r
21 * exceptional circumstances). Thank you for your support! *
\r
23 ***************************************************************************
\r
25 This file is part of the FreeRTOS distribution.
\r
27 FreeRTOS is free software; you can redistribute it and/or modify it under
\r
28 the terms of the GNU General Public License (version 2) as published by the
\r
29 Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
\r
30 ***NOTE*** The exception to the GPL is included to allow you to distribute
\r
31 a combined work that includes FreeRTOS without being obliged to provide the
\r
32 source code for proprietary components outside of the FreeRTOS kernel.
\r
33 FreeRTOS is distributed in the hope that it will be useful, but WITHOUT
\r
34 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
\r
35 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
\r
36 more details. You should have received a copy of the GNU General Public
\r
37 License and the FreeRTOS license exception along with FreeRTOS; if not it
\r
38 can be viewed here: http://www.freertos.org/a00114.html and also obtained
\r
39 by writing to Richard Barry, contact details for whom are available on the
\r
44 http://www.FreeRTOS.org - Documentation, latest information, license and
\r
47 http://www.SafeRTOS.com - A version that is certified for use in safety
\r
50 http://www.OpenRTOS.com - Commercial support, development, porting,
\r
51 licensing and training services.
\r
55 * The documentation page for this demo available on http://www.FreeRTOS.org
\r
56 * documents the hardware configuration required to run this demo. It also
\r
57 * provides more information on the expected demo application behaviour.
\r
59 * main() creates all the demo application tasks, then starts the scheduler.
\r
60 * A lot of the created tasks are from the pool of "standard demo" tasks. The
\r
61 * web documentation provides more details of the standard demo tasks, which
\r
62 * provide no particular functionality but do provide good examples of how to
\r
63 * use the FreeRTOS API.
\r
65 * In addition to the standard demo tasks, the following tasks, interrupts and
\r
66 * tests are defined and/or created within this file:
\r
68 * "LCD" task - The LCD task is a 'gatekeeper' task. It is the only task that
\r
69 * is permitted to access the LCD and therefore ensures access to the LCD is
\r
70 * always serialised and there are no mutual exclusion issues. When a task or
\r
71 * an interrupt wants to write to the LCD, it does not access the LCD directly
\r
72 * but instead sends the message to the LCD task. The LCD task then performs
\r
73 * the actual LCD output. This mechanism also allows interrupts to, in effect,
\r
74 * write to the LCD by sending messages to the LCD task.
\r
76 * The LCD task is also a demonstration of a 'controller' task design pattern.
\r
77 * Some tasks do not actually send a string to the LCD task directly, but
\r
78 * instead send a command that is interpreted by the LCD task. In a normal
\r
79 * application these commands can be control values or set points, in this
\r
80 * simple example the commands just result in messages being displayed on the
\r
83 * "Button Poll" task - This task polls the state of the 'up' key on the
\r
84 * joystick input device. It uses the vTaskDelay() API function to control
\r
85 * the poll rate to ensure debouncing is not necessary and that the task does
\r
86 * not use all the available CPU processing time.
\r
88 * Button Interrupt and run time stats display - The select button on the
\r
89 * joystick input device is configured to generate an external interrupt. The
\r
90 * handler for this interrupt sends a message to LCD task, which interprets the
\r
91 * message to mean, firstly write a message to the LCD, and secondly, generate
\r
92 * a table of run time statistics. The run time statistics are displayed as a
\r
93 * table that contains information on how much processing time each task has
\r
94 * been allocated since the application started to execute. This information
\r
95 * is provided both as an absolute time, and as a percentage of the total run
\r
96 * time. The information is displayed in the terminal IO window of the IAR
\r
97 * embedded workbench. The online documentation for this demo shows a screen
\r
98 * shot demonstrating where the run time stats can be viewed.
\r
100 * Idle Hook - The idle hook is a function that is called on each iteration of
\r
101 * the idle task. In this case it is used to place the processor into a low
\r
102 * power mode. Note however that this application is implemented using standard
\r
103 * components, and is therefore not optimised for low power operation. Lower
\r
104 * power consumption would be achieved by converting polling tasks into event
\r
105 * driven tasks, and slowing the tick interrupt frequency.
\r
107 * "Check" function called from the tick hook - The tick hook is called during
\r
108 * each tick interrupt. It is called from an interrupt context so must execute
\r
109 * quickly, not attempt to block, and not call any FreeRTOS API functions that
\r
110 * do not end in "FromISR". In this case the tick hook executes a 'check'
\r
111 * function. This only executes every five seconds. Its main function is to
\r
112 * check that all the standard demo tasks are still operational. Each time it
\r
113 * executes it sends a status code to the LCD task. The LCD task interprets the
\r
114 * code and displays an appropriate message - which will be PASS if no tasks
\r
115 * have reported any errors, or a message stating which task has reported an
\r
118 * "Reg test" tasks - These fill the registers with known values, then check
\r
119 * that each register still contains its expected value. Each task uses
\r
120 * different values. The tasks run with very low priority so get preempted
\r
121 * very frequently. A check variable is incremented on each iteration of the
\r
122 * test loop. A register containing an unexpected value is indicative of an
\r
123 * error in the context switching mechanism and will result in a branch to a
\r
124 * null loop - which in turn will prevent the check variable from incrementing
\r
125 * any further and allow the check task (described a above) to determine that an
\r
126 * error has occurred. The nature of the reg test tasks necessitates that they
\r
127 * are written in assembly code.
\r
129 * *NOTE 2* vApplicationSetupTimerInterrupt() is called by the kernel to let
\r
130 * the application set up a timer to generate the tick interrupt. In this
\r
131 * example a timer A0 is used for this purpose.
\r
135 /* Standard includes. */
\r
138 /* FreeRTOS includes. */
\r
139 #include "FreeRTOS.h"
\r
143 /* Hardware includes. */
\r
144 #include "msp430.h"
\r
145 #include "hal_MSP-EXP430F5438.h"
\r
147 /* Standard demo includes. */
\r
148 #include "ParTest.h"
\r
149 #include "dynamic.h"
\r
150 #include "comtest2.h"
\r
151 #include "GenQTest.h"
\r
153 /* Codes sent within messages to the LCD task so the LCD task can interpret
\r
154 exactly what the message it just received was. These are sent in the
\r
155 cMessageID member of the message structure (defined below). */
\r
156 #define mainMESSAGE_BUTTON_UP ( 1 )
\r
157 #define mainMESSAGE_BUTTON_SEL ( 2 )
\r
158 #define mainMESSAGE_STATUS ( 3 )
\r
160 /* When the cMessageID member of the message sent to the LCD task is
\r
161 mainMESSAGE_STATUS then these definitions are sent in the ulMessageValue member
\r
162 of the same message and indicate what the status actually is. */
\r
163 #define mainERROR_DYNAMIC_TASKS ( pdPASS + 1 )
\r
164 #define mainERROR_COM_TEST ( pdPASS + 2 )
\r
165 #define mainERROR_GEN_QUEUE_TEST ( pdPASS + 3 )
\r
166 #define mainERROR_REG_TEST ( pdPASS + 4 )
\r
168 /* The length of the queue (the number of items the queue can hold) that is used
\r
169 to send messages from tasks and interrupts the the LCD task. */
\r
170 #define mainQUEUE_LENGTH ( 5 )
\r
172 /* Priorities used by the test and demo tasks. */
\r
173 #define mainLCD_TASK_PRIORITY ( tskIDLE_PRIORITY + 1 )
\r
174 #define mainCOM_TEST_PRIORITY ( tskIDLE_PRIORITY + 2 )
\r
175 #define mainGENERIC_QUEUE_TEST_PRIORITY ( tskIDLE_PRIORITY )
\r
177 /* The LED used by the comtest tasks. See the comtest.c file for more
\r
179 #define mainCOM_TEST_LED ( 1 )
\r
181 /* The baud rate used by the comtest tasks described at the top of this file. */
\r
182 #define mainCOM_TEST_BAUD_RATE ( 38400 )
\r
184 /* The maximum number of lines of text that can be displayed on the LCD. */
\r
185 #define mainMAX_LCD_LINES ( 8 )
\r
186 /*-----------------------------------------------------------*/
\r
189 * The reg test tasks as described at the top of this file.
\r
191 extern void vRegTest1Task( void *pvParameters );
\r
192 extern void vRegTest2Task( void *pvParameters );
\r
195 * Configures clocks, LCD, port pints, etc. necessary to execute this demo.
\r
197 static void prvSetupHardware( void );
\r
200 * Definition of the LCD/controller task described in the comments at the top
\r
203 static void prvLCDTask( void *pvParameters );
\r
206 * Definition of the button poll task described in the comments at the top of
\r
209 static void prvButtonPollTask( void *pvParameters );
\r
212 * Converts a status message value into an appropriate string for display on
\r
213 * the LCD. The string is written to pcBuffer.
\r
215 static void prvGenerateStatusMessage( char *pcBuffer, long lStatusValue );
\r
217 /*-----------------------------------------------------------*/
\r
219 /* Variables that are incremented on each iteration of the reg test tasks -
\r
220 provided the tasks have not reported any errors. The check task inspects these
\r
221 variables to ensure they are still incrementing as expected. If a variable
\r
222 stops incrementing then it is likely that its associate task has stalled. */
\r
223 volatile unsigned short usRegTest1Counter = 0, usRegTest2Counter = 0;
\r
225 /* The handle of the queue used to send messages from tasks and interrupts to
\r
227 static xQueueHandle xLCDQueue = NULL;
\r
229 /* The definition of each message sent from tasks and interrupts to the LCD
\r
233 char cMessageID; /* << States what the message is. */
\r
234 unsigned long ulMessageValue; /* << States the message value (can be an integer, string pointer, etc. depending on the value of cMessageID). */
\r
237 /*-----------------------------------------------------------*/
\r
239 /* The linker script tests the FreeRTOS ports use of 20bit addresses by
\r
240 locating all code in high memory. The following pragma ensures that main
\r
241 remains in low memory. The ISR_CODE segment is used for convenience as ISR
\r
242 functions are always placed in low memory. */
\r
243 #pragma location="ISR_CODE"
\r
246 /* Configure the peripherals used by this demo application. This includes
\r
247 configuring the joystick input select button to generate interrupts. */
\r
248 prvSetupHardware();
\r
250 /* Create the queue used by tasks and interrupts to send strings to the LCD
\r
252 xLCDQueue = xQueueCreate( mainQUEUE_LENGTH, sizeof( xQueueMessage ) );
\r
254 /* If the queue could not be created then don't create any tasks that might
\r
255 attempt to use the queue. */
\r
256 if( xLCDQueue != NULL )
\r
258 /* Add the created queue to the queue registry so it can be viewed in
\r
259 the IAR FreeRTOS state viewer plug-in. */
\r
260 vQueueAddToRegistry( xLCDQueue, "LCDQueue" );
\r
262 /* Create the standard demo tasks. */
\r
263 vAltStartComTestTasks( mainCOM_TEST_PRIORITY, mainCOM_TEST_BAUD_RATE, mainCOM_TEST_LED );
\r
264 vStartDynamicPriorityTasks();
\r
265 vStartGenericQueueTasks( mainGENERIC_QUEUE_TEST_PRIORITY );
\r
267 /* Create the LCD, button poll and register test tasks, as described at
\r
268 the top of this file. */
\r
269 xTaskCreate( prvLCDTask, ( signed char * ) "LCD", configMINIMAL_STACK_SIZE * 2, NULL, mainLCD_TASK_PRIORITY, NULL );
\r
270 xTaskCreate( prvButtonPollTask, ( signed char * ) "BPoll", configMINIMAL_STACK_SIZE, NULL, tskIDLE_PRIORITY, NULL );
\r
271 xTaskCreate( vRegTest1Task, ( signed char * ) "Reg1", configMINIMAL_STACK_SIZE, NULL, 0, NULL );
\r
272 xTaskCreate( vRegTest2Task, ( signed char * ) "Reg2", configMINIMAL_STACK_SIZE, NULL, 0, NULL );
\r
274 /* Start the scheduler. */
\r
275 vTaskStartScheduler();
\r
278 /* If all is well then this line will never be reached. If it is reached
\r
279 then it is likely that there was insufficient (FreeRTOS) heap memory space
\r
280 to create the idle task. This may have been trapped by the malloc() failed
\r
281 hook function, if one is configured. */
\r
284 /*-----------------------------------------------------------*/
\r
286 static void prvLCDTask( void *pvParameters )
\r
288 xQueueMessage xReceivedMessage;
\r
290 /* Buffer into which strings are formatted and placed ready for display on the
\r
291 LCD. Note this is a static variable to prevent it being allocated on the task
\r
292 stack, which is too small to hold such a variable. The stack size is configured
\r
293 when the task is created. */
\r
294 static char cBuffer[ 512 ];
\r
295 unsigned char ucLine = 1;
\r
298 /* This function is the only function that uses printf(). If printf() is
\r
299 used from any other function then some sort of mutual exclusion on stdout
\r
302 This is also the only function that is permitted to access the LCD.
\r
304 First print out the number of bytes that remain in the FreeRTOS heap. This
\r
305 can be viewed in the terminal IO window within the IAR Embedded Workbench. */
\r
306 printf( "%d bytes of heap space remain unallocated\n", ( int ) xPortGetFreeHeapSize() );
\r
310 /* Wait for a message to be received. Using portMAX_DELAY as the block
\r
311 time will result in an indefinite wait provided INCLUDE_vTaskSuspend is
\r
312 set to 1 in FreeRTOSConfig.h, therefore there is no need to check the
\r
313 function return value and the function will only return when a value
\r
314 has been received. */
\r
315 xQueueReceive( xLCDQueue, &xReceivedMessage, portMAX_DELAY );
\r
317 /* Clear the LCD if no room remains for any more text output. */
\r
318 if( ucLine > mainMAX_LCD_LINES )
\r
320 halLcdClearScreen();
\r
324 /* What is this message? What does it contain? */
\r
325 switch( xReceivedMessage.cMessageID )
\r
327 case mainMESSAGE_BUTTON_UP : /* The button poll task has just
\r
328 informed this task that the up
\r
329 button on the joystick input has
\r
330 been pressed or released. */
\r
331 sprintf( cBuffer, "Button up = %d", ( int ) xReceivedMessage.ulMessageValue );
\r
334 case mainMESSAGE_BUTTON_SEL : /* The select button interrupt
\r
335 just informed this task that the
\r
336 select button was pressed.
\r
337 Generate a table of task run time
\r
338 statistics and output this to
\r
339 the terminal IO window in the IAR
\r
340 embedded workbench. */
\r
341 printf( "\nTask\t Abs Time\t %%Time\n*****************************************" );
\r
343 vTaskGetRunTimeStats( ( signed char * ) cBuffer );
\r
347 /* Also print out a message to
\r
348 the LCD - in this case the
\r
349 pointer to the string to print
\r
350 is sent directly in the
\r
351 ulMessageValue member of the
\r
352 message. This just demonstrates
\r
353 a different communication
\r
355 sprintf( cBuffer, "%s", ( char * ) xReceivedMessage.ulMessageValue );
\r
358 case mainMESSAGE_STATUS : /* The tick interrupt hook
\r
359 function has just informed this
\r
360 task of the system status.
\r
361 Generate a string in accordance
\r
362 with the status value. */
\r
363 prvGenerateStatusMessage( cBuffer, xReceivedMessage.ulMessageValue );
\r
366 default : sprintf( cBuffer, "Unknown message" );
\r
370 /* Output the message that was placed into the cBuffer array within the
\r
371 switch statement above, then move onto the next line ready for the next
\r
372 message to arrive on the queue. */
\r
373 halLcdPrintLine( cBuffer, ucLine, OVERWRITE_TEXT );
\r
377 /*-----------------------------------------------------------*/
\r
379 static void prvGenerateStatusMessage( char *pcBuffer, long lStatusValue )
\r
381 /* Just a utility function to convert a status value into a meaningful
\r
382 string for output onto the LCD. */
\r
383 switch( lStatusValue )
\r
385 case pdPASS : sprintf( pcBuffer, "Status = PASS" );
\r
387 case mainERROR_DYNAMIC_TASKS : sprintf( pcBuffer, "Err: Dynamic tsks" );
\r
389 case mainERROR_COM_TEST : sprintf( pcBuffer, "Err: COM test" );
\r
391 case mainERROR_GEN_QUEUE_TEST : sprintf( pcBuffer, "Error: Gen Q test" );
\r
393 case mainERROR_REG_TEST : sprintf( pcBuffer, "Error: Reg test" );
\r
395 default : sprintf( pcBuffer, "Unknown status" );
\r
399 /*-----------------------------------------------------------*/
\r
401 static void prvButtonPollTask( void *pvParameters )
\r
403 unsigned char ucLastState = pdFALSE, ucState;
\r
404 xQueueMessage xMessage;
\r
406 /* This tasks performs the button polling functionality as described at the
\r
407 top of this file. */
\r
410 /* Check the button state. */
\r
411 ucState = ( halButtonsPressed() & BUTTON_UP );
\r
415 /* The button was pressed. */
\r
419 if( ucState != ucLastState )
\r
421 /* The state has changed, send a message to the LCD task. */
\r
422 xMessage.cMessageID = mainMESSAGE_BUTTON_UP;
\r
423 xMessage.ulMessageValue = ( unsigned long ) ucState;
\r
424 ucLastState = ucState;
\r
425 xQueueSend( xLCDQueue, &xMessage, portMAX_DELAY );
\r
428 /* Block for 10 milliseconds so this task does not utilise all the CPU
\r
429 time and debouncing of the button is not necessary. */
\r
430 vTaskDelay( 10 / portTICK_RATE_MS );
\r
433 /*-----------------------------------------------------------*/
\r
435 static void prvSetupHardware( void )
\r
437 /* Convert a Hz value to a KHz value, as required by the Init_FLL_Settle()
\r
439 unsigned long ulCPU_Clock_KHz = ( configCPU_CLOCK_HZ / 1000UL );
\r
443 LFXT_Start( XT1DRIVE_0 );
\r
444 Init_FLL_Settle( ( unsigned short ) ulCPU_Clock_KHz, 488 );
\r
446 halButtonsInit( BUTTON_ALL );
\r
447 halButtonsInterruptEnable( BUTTON_SELECT );
\r
449 /* Initialise the LCD, but note that the backlight is not used as the
\r
450 library function uses timer A0 to modulate the backlight, and this file
\r
451 defines vApplicationSetupTimerInterrupt() to also use timer A0 to generate
\r
452 the tick interrupt. If the backlight is required, then change either the
\r
453 halLCD library or vApplicationSetupTimerInterrupt() to use a different
\r
454 timer. Timer A1 is used for the run time stats time base6. */
\r
456 halLcdSetContrast( 100 );
\r
457 halLcdClearScreen();
\r
459 halLcdPrintLine( " www.FreeRTOS.org", 0, OVERWRITE_TEXT );
\r
461 /*-----------------------------------------------------------*/
\r
463 void vApplicationTickHook( void )
\r
465 static unsigned short usLastRegTest1Counter = 0, usLastRegTest2Counter = 0;
\r
466 static unsigned long ulCounter = 0;
\r
467 static const unsigned long ulCheckFrequency = 5000UL / portTICK_RATE_MS;
\r
468 portBASE_TYPE xHigherPriorityTaskWoken = pdFALSE;
\r
470 /* Define the status message that is sent to the LCD task. By default the
\r
472 static xQueueMessage xStatusMessage = { mainMESSAGE_STATUS, pdPASS };
\r
474 /* This is called from within the tick interrupt and performs the 'check'
\r
475 functionality as described in the comments at the top of this file.
\r
477 Is it time to perform the 'check' functionality again? */
\r
479 if( ulCounter >= ulCheckFrequency )
\r
481 /* See if the standard demo tasks are executing as expected, changing
\r
482 the message that is sent to the LCD task from PASS to an error code if
\r
483 any tasks set reports an error. */
\r
484 if( xAreComTestTasksStillRunning() != pdPASS )
\r
486 xStatusMessage.ulMessageValue = mainERROR_COM_TEST;
\r
489 if( xAreDynamicPriorityTasksStillRunning() != pdPASS )
\r
491 xStatusMessage.ulMessageValue = mainERROR_DYNAMIC_TASKS;
\r
494 if( xAreGenericQueueTasksStillRunning() != pdPASS )
\r
496 xStatusMessage.ulMessageValue = mainERROR_GEN_QUEUE_TEST;
\r
499 /* Check the reg test tasks are still cycling. They will stop
\r
500 incrementing their loop counters if they encounter an error. */
\r
501 if( usRegTest1Counter == usLastRegTest1Counter )
\r
503 xStatusMessage.ulMessageValue = mainERROR_REG_TEST;
\r
506 if( usRegTest2Counter == usLastRegTest2Counter )
\r
508 xStatusMessage.ulMessageValue = mainERROR_REG_TEST;
\r
511 usLastRegTest1Counter = usRegTest1Counter;
\r
512 usLastRegTest2Counter = usRegTest2Counter;
\r
514 /* As this is the tick hook the lHigherPriorityTaskWoken parameter is not
\r
515 needed (a context switch is going to be performed anyway), but it must
\r
516 still be provided. */
\r
517 xQueueSendFromISR( xLCDQueue, &xStatusMessage, &xHigherPriorityTaskWoken );
\r
521 /* Just periodically toggle an LED to show that the tick interrupt is
\r
522 running. Note that this access LED_PORT_OUT in a non-atomic way, so tasks
\r
523 that access the same port must do so from a critical section. */
\r
524 if( ( ulCounter & 0xff ) == 0 )
\r
526 if( ( LED_PORT_OUT & LED_1 ) == 0 )
\r
528 LED_PORT_OUT |= LED_1;
\r
532 LED_PORT_OUT &= ~LED_1;
\r
536 /*-----------------------------------------------------------*/
\r
538 #pragma vector=PORT2_VECTOR
\r
539 __interrupt static void prvSelectButtonInterrupt(void)
\r
541 /* Define the message sent to the LCD task from this interrupt. */
\r
542 static const xQueueMessage xMessage = { mainMESSAGE_BUTTON_SEL, ( unsigned long ) "Select Interrupt" };
\r
543 portBASE_TYPE xHigherPriorityTaskWoken = pdFALSE;
\r
545 /* This is the interrupt handler for the joystick select button input.
\r
546 The button has been pushed, write a message to the LCD via the LCD task. */
\r
547 xQueueSendFromISR( xLCDQueue, &xMessage, &xHigherPriorityTaskWoken );
\r
551 /* If writing to xLCDQueue caused a task to unblock, and the unblocked task
\r
552 has a priority equal to or above the task that this interrupt interrupted,
\r
553 then lHigherPriorityTaskWoken will have been set to pdTRUE internally within
\r
554 xQueuesendFromISR(), and portEND_SWITCHING_ISR() will ensure that this
\r
555 interrupt returns directly to the higher priority unblocked task. */
\r
556 portYIELD_FROM_ISR( xHigherPriorityTaskWoken );
\r
558 /*-----------------------------------------------------------*/
\r
560 /* The MSP430X port uses this callback function to configure its tick interrupt.
\r
561 This allows the application to choose the tick interrupt source.
\r
562 configTICK_VECTOR must also be set in FreeRTOSConfig.h to the correct
\r
563 interrupt vector for the chosen tick interrupt source. This implementation of
\r
564 vApplicationSetupTimerInterrupt() generates the tick from timer A0, so in this
\r
565 case configTICK_VECTOR is set to TIMER0_A0_VECTOR. */
\r
566 void vApplicationSetupTimerInterrupt( void )
\r
568 const unsigned short usACLK_Frequency_Hz = 32768;
\r
570 /* Ensure the timer is stopped. */
\r
573 /* Run the timer from the ACLK. */
\r
576 /* Clear everything to start with. */
\r
579 /* Set the compare match value according to the tick rate we want. */
\r
580 TA0CCR0 = usACLK_Frequency_Hz / configTICK_RATE_HZ;
\r
582 /* Enable the interrupts. */
\r
585 /* Start up clean. */
\r
591 /*-----------------------------------------------------------*/
\r
593 void vApplicationIdleHook( void )
\r
595 /* Called on each iteration of the idle task. In this case the idle task
\r
596 just enters a low(ish) power mode. */
\r
597 __bis_SR_register( LPM1_bits + GIE );
\r
599 /*-----------------------------------------------------------*/
\r
601 void vApplicationMallocFailedHook( void )
\r
603 /* Called if a call to pvPortMalloc() fails because there is insufficient
\r
604 free memory available in the FreeRTOS heap. pvPortMalloc() is called
\r
605 internally by FreeRTOS API functions that create tasks, queues or
\r
607 taskDISABLE_INTERRUPTS();
\r
610 /*-----------------------------------------------------------*/
\r
612 void vApplicationStackOverflowHook( xTaskHandle *pxTask, signed char *pcTaskName )
\r
615 ( void ) pcTaskName;
\r
617 /* Run time stack overflow checking is performed if
\r
618 configconfigCHECK_FOR_STACK_OVERFLOW is defined to 1 or 2. This hook
\r
619 function is called if a stack overflow is detected. */
\r
620 taskDISABLE_INTERRUPTS();
\r
623 /*-----------------------------------------------------------*/
\r