1 /*This file has been prepared for Doxygen automatic documentation generation.*/
\r
2 /*! \file *********************************************************************
\r
4 * \brief FreeRTOS and lwIP example for AVR32 UC3.
\r
6 * - Compiler: GNU GCC for AVR32
\r
7 * - Supported devices: All AVR32 devices can be used.
\r
10 * \author Atmel Corporation: http://www.atmel.com \n
\r
11 * Support and FAQ: http://support.atmel.no/
\r
13 *****************************************************************************/
\r
15 /* Copyright (c) 2007, Atmel Corporation All rights reserved.
\r
17 * Redistribution and use in source and binary forms, with or without
\r
18 * modification, are permitted provided that the following conditions are met:
\r
20 * 1. Redistributions of source code must retain the above copyright notice,
\r
21 * this list of conditions and the following disclaimer.
\r
23 * 2. Redistributions in binary form must reproduce the above copyright notice,
\r
24 * this list of conditions and the following disclaimer in the documentation
\r
25 * and/or other materials provided with the distribution.
\r
27 * 3. The name of ATMEL may not be used to endorse or promote products derived
\r
28 * from this software without specific prior written permission.
\r
30 * THIS SOFTWARE IS PROVIDED BY ATMEL ``AS IS'' AND ANY EXPRESS OR IMPLIED
\r
31 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
\r
32 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY AND
\r
33 * SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT,
\r
34 * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
\r
35 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
\r
36 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
\r
37 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
\r
38 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
\r
39 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
\r
43 /* Environment include files. */
\r
49 /* Scheduler include files. */
\r
50 #include "FreeRTOS.h"
\r
53 /* Demo file headers. */
\r
54 #include "partest.h"
\r
56 #include "ethernet.h"
\r
57 #include "netif/etharp.h"
\r
60 /* Priority definitions for most of the tasks in the demo application. */
\r
61 #define mainLED_TASK_PRIORITY ( tskIDLE_PRIORITY + 1 )
\r
62 #define mainETH_TASK_PRIORITY ( tskIDLE_PRIORITY + 1 )
\r
64 /* Baud rate used by the serial port tasks. */
\r
65 #define mainCOM_BAUD_RATE ( ( unsigned portLONG ) 57600 )
\r
66 #define mainCOM_BUFFER_LEN ( ( unsigned portLONG ) 70 )
\r
68 /* An address in the internal Flash used to count resets. This is used to check that
\r
69 the demo application is not unexpectedly resetting. */
\r
70 #define mainRESET_COUNT_ADDRESS ( ( void * ) 0xC0000000 )
\r
75 //! \brief start the software here
\r
76 //! 1) Initialize the microcontroller and the shared hardware resources
\r
78 //! 2) Launch the IP modules.
\r
79 //! 3) Start FreeRTOS.
\r
80 //! \return 42, which should never occur.
\r
85 volatile avr32_pm_t* pm = &AVR32_PM;
\r
87 /* 1) Initialize the microcontroller and the shared hardware resources of the board. */
\r
89 /* Switch to external oscillator 0 */
\r
90 pm_switch_to_osc0( pm, FOSC0, OSC0_STARTUP );
\r
92 /* Setup PLL0 on OSC0, mul+1=16 ,divisor by 1, lockcount=16, ie. 12Mhzx16/1 = 192MHz output.
\r
93 Extra div by 2 => 96MHz */
\r
94 pm_pll_setup(pm, /* volatile avr32_pm_t* pm */
\r
95 0, /* unsigned int pll */
\r
96 15, /* unsigned int mul */
\r
97 1, /* unsigned int div, Sel Osc0/PLL0 or Osc1/Pll1 */
\r
98 0, /* unsigned int osc */
\r
99 16); /* unsigned int lockcount */
\r
101 pm_pll_set_option( pm, 0, // pll0
\r
102 0, // Choose the range 160-240MHz.
\r
107 pm_pll_enable(pm,0);
\r
109 /* Wait for PLL0 locked */
\r
110 pm_wait_for_pll0_locked(pm) ;
\r
112 /* Setup generic clock number 2 on PLL, with OSC0/PLL0, no divisor */
\r
115 1, /* Use Osc (=0) or PLL (=1) */
\r
116 0, /* Sel Osc0/PLL0 or Osc1/Pll1 */
\r
120 /* Enable Generic clock 0*/
\r
121 pm_gc_enable(pm, 0);
\r
123 /* switch to clock */
\r
124 pm_cksel( pm, 1, 1, 1, 0, 1, 0 );
\r
125 flashc_set_wait_state( 1 );
\r
126 pm_switch_to_clock( pm, AVR32_PM_MCCTRL_MCSEL_PLL0 );
\r
128 /* Setup the LED's for output. */
\r
129 vParTestInitialise();
\r
131 /* Start the flash tasks just to provide visual feedback that the demo is
\r
133 vStartLEDFlashTasks( mainLED_TASK_PRIORITY );
\r
135 /* 2) Start ethernet task. */
\r
136 vStartEthernetTask( mainETH_TASK_PRIORITY );
\r
138 /* 3) Start FreeRTOS. */
\r
139 vTaskStartScheduler();
\r
141 /* Will only reach here if there was insufficient memory to create the idle task. */
\r
145 /*-----------------------------------------------------------*/
\r