2 FreeRTOS V5.4.0 - Copyright (C) 2003-2009 Richard Barry.
\r
4 This file is part of the FreeRTOS distribution.
\r
6 FreeRTOS is free software; you can redistribute it and/or modify it under
\r
7 the terms of the GNU General Public License (version 2) as published by the
\r
8 Free Software Foundation and modified by the FreeRTOS exception.
\r
9 **NOTE** The exception to the GPL is included to allow you to distribute a
\r
10 combined work that includes FreeRTOS without being obliged to provide the
\r
11 source code for proprietary components outside of the FreeRTOS kernel.
\r
12 Alternative commercial license and support terms are also available upon
\r
13 request. See the licensing section of http://www.FreeRTOS.org for full
\r
16 FreeRTOS is distributed in the hope that it will be useful, but WITHOUT
\r
17 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
\r
18 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
\r
21 You should have received a copy of the GNU General Public License along
\r
22 with FreeRTOS; if not, write to the Free Software Foundation, Inc., 59
\r
23 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
\r
26 ***************************************************************************
\r
28 * Looking for a quick start? Then check out the FreeRTOS eBook! *
\r
29 * See http://www.FreeRTOS.org/Documentation for details *
\r
31 ***************************************************************************
\r
35 Please ensure to read the configuration and relevant port sections of the
\r
36 online documentation.
\r
38 http://www.FreeRTOS.org - Documentation, latest information, license and
\r
41 http://www.SafeRTOS.com - A version that is certified for use in safety
\r
44 http://www.OpenRTOS.com - Commercial support, development, porting,
\r
45 licensing and training services.
\r
48 /*-----------------------------------------------------------
\r
49 * Characters on the LCD are used to simulate LED's. In this case the 'ParTest'
\r
50 * is really operating on the LCD display.
\r
51 *-----------------------------------------------------------*/
\r
54 * This demo is configured to execute on the ES449 prototyping board from
\r
55 * SoftBaugh. The ES449 has a built in LCD display and a single built in user
\r
56 * LED. Therefore, in place of flashing an LED, the 'flash' and 'check' tasks
\r
57 * toggle '*' characters on the LCD. The left most '*' represents LED 0, the
\r
60 * There is a single genuine on board LED referenced as LED 10.
\r
64 /* Scheduler includes. */
\r
65 #include "FreeRTOS.h"
\r
68 /* Demo application includes. */
\r
69 #include "partest.h"
\r
71 /* Constants required to setup the LCD. */
\r
72 #define LCD_DIV_64 5
\r
74 /* Constants required to access the "LED's". The LED segments are turned on
\r
75 and off to generate '*' characters. */
\r
76 #define partstNUM_LEDS ( ( unsigned portCHAR ) 6 )
\r
77 #define partstSEGMENTS_ON ( ( unsigned portCHAR ) 0x0f )
\r
78 #define partstSEGMENTS_OFF ( ( unsigned portCHAR ) 0x00 )
\r
80 /* The LED number of the real on board LED, rather than a simulated LED. */
\r
81 #define partstON_BOARD_LED ( ( unsigned portBASE_TYPE ) 10 )
\r
82 #define mainON_BOARD_LED_BIT ( ( unsigned portCHAR ) 0x01 )
\r
84 /* The LCD segments used to generate the '*' characters for LED's 0 to 5. */
\r
85 unsigned portCHAR * const ucRHSSegments[ partstNUM_LEDS ] = { ( unsigned portCHAR * )0xa4,
\r
86 ( unsigned portCHAR * )0xa2,
\r
87 ( unsigned portCHAR * )0xa0,
\r
88 ( unsigned portCHAR * )0x9e,
\r
89 ( unsigned portCHAR * )0x9c,
\r
90 ( unsigned portCHAR * )0x9a };
\r
92 unsigned portCHAR * const ucLHSSegments[ partstNUM_LEDS ] = { ( unsigned portCHAR * )0xa3,
\r
93 ( unsigned portCHAR * )0xa1,
\r
94 ( unsigned portCHAR * )0x9f,
\r
95 ( unsigned portCHAR * )0x9d,
\r
96 ( unsigned portCHAR * )0x9b,
\r
97 ( unsigned portCHAR * )0x99 };
\r
100 * Toggle the single genuine built in LED.
\r
102 static void prvToggleOnBoardLED( void );
\r
104 /*-----------------------------------------------------------*/
\r
106 void vParTestInitialise( void )
\r
108 /* Initialise the LCD hardware. */
\r
110 /* Used for the onboard LED. */
\r
113 // Setup Basic Timer for LCD operation
\r
114 BTCTL = (LCD_DIV_64+0x23);
\r
116 // Setup port functions
\r
123 /* Initialise all segments to off. */
\r
124 LCDM1 = partstSEGMENTS_OFF;
\r
125 LCDM2 = partstSEGMENTS_OFF;
\r
126 LCDM3 = partstSEGMENTS_OFF;
\r
127 LCDM4 = partstSEGMENTS_OFF;
\r
128 LCDM5 = partstSEGMENTS_OFF;
\r
129 LCDM6 = partstSEGMENTS_OFF;
\r
130 LCDM7 = partstSEGMENTS_OFF;
\r
131 LCDM8 = partstSEGMENTS_OFF;
\r
132 LCDM9 = partstSEGMENTS_OFF;
\r
133 LCDM10 = partstSEGMENTS_OFF;
\r
134 LCDM11 = partstSEGMENTS_OFF;
\r
135 LCDM12 = partstSEGMENTS_OFF;
\r
136 LCDM13 = partstSEGMENTS_OFF;
\r
137 LCDM14 = partstSEGMENTS_OFF;
\r
138 LCDM15 = partstSEGMENTS_OFF;
\r
139 LCDM16 = partstSEGMENTS_OFF;
\r
140 LCDM17 = partstSEGMENTS_OFF;
\r
141 LCDM18 = partstSEGMENTS_OFF;
\r
142 LCDM19 = partstSEGMENTS_OFF;
\r
143 LCDM20 = partstSEGMENTS_OFF;
\r
145 /* Setup LCD control. */
\r
146 LCDCTL = (LCDSG0_7|LCD4MUX|LCDON);
\r
148 /*-----------------------------------------------------------*/
\r
150 void vParTestSetLED( unsigned portBASE_TYPE uxLED, signed portBASE_TYPE xValue )
\r
152 /* Set or clear the output [in this case show or hide the '*' character. */
\r
153 if( uxLED < ( portBASE_TYPE ) partstNUM_LEDS )
\r
159 /* Turn on the segments required to show the '*'. */
\r
160 *( ucRHSSegments[ uxLED ] ) = partstSEGMENTS_ON;
\r
161 *( ucLHSSegments[ uxLED ] ) = partstSEGMENTS_ON;
\r
165 /* Turn off all the segments. */
\r
166 *( ucRHSSegments[ uxLED ] ) = partstSEGMENTS_OFF;
\r
167 *( ucLHSSegments[ uxLED ] ) = partstSEGMENTS_OFF;
\r
173 /*-----------------------------------------------------------*/
\r
175 void vParTestToggleLED( unsigned portBASE_TYPE uxLED )
\r
177 if( uxLED < ( portBASE_TYPE ) partstNUM_LEDS )
\r
181 /* If the '*' is already showing - hide it. If it is not already
\r
182 showing then show it. */
\r
183 if( *( ucRHSSegments[ uxLED ] ) )
\r
185 *( ucRHSSegments[ uxLED ] ) = partstSEGMENTS_OFF;
\r
186 *( ucLHSSegments[ uxLED ] ) = partstSEGMENTS_OFF;
\r
190 *( ucRHSSegments[ uxLED ] ) = partstSEGMENTS_ON;
\r
191 *( ucLHSSegments[ uxLED ] ) = partstSEGMENTS_ON;
\r
198 if( uxLED == partstON_BOARD_LED )
\r
200 /* The request related to the genuine on board LED. */
\r
201 prvToggleOnBoardLED();
\r
205 /*-----------------------------------------------------------*/
\r
207 static void prvToggleOnBoardLED( void )
\r
209 static unsigned portSHORT sState = pdFALSE;
\r
211 /* Toggle the state of the single genuine on board LED. */
\r
214 P1OUT |= mainON_BOARD_LED_BIT;
\r
218 P1OUT &= ~mainON_BOARD_LED_BIT;
\r
223 /*-----------------------------------------------------------*/
\r