2 FreeRTOS V5.4.2 - Copyright (C) 2009 Real Time Engineers Ltd.
\r
4 This file is part of the FreeRTOS distribution.
\r
6 FreeRTOS is free software; you can redistribute it and/or modify it under
\r
7 the terms of the GNU General Public License (version 2) as published by the
\r
8 Free Software Foundation and modified by the FreeRTOS exception.
\r
9 **NOTE** The exception to the GPL is included to allow you to distribute a
\r
10 combined work that includes FreeRTOS without being obliged to provide the
\r
11 source code for proprietary components outside of the FreeRTOS kernel.
\r
12 Alternative commercial license and support terms are also available upon
\r
13 request. See the licensing section of http://www.FreeRTOS.org for full
\r
16 FreeRTOS is distributed in the hope that it will be useful, but WITHOUT
\r
17 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
\r
18 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
\r
21 You should have received a copy of the GNU General Public License along
\r
22 with FreeRTOS; if not, write to the Free Software Foundation, Inc., 59
\r
23 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
\r
26 ***************************************************************************
\r
28 * Looking for a quick start? Then check out the FreeRTOS eBook! *
\r
29 * See http://www.FreeRTOS.org/Documentation for details *
\r
31 ***************************************************************************
\r
35 Please ensure to read the configuration and relevant port sections of the
\r
36 online documentation.
\r
38 http://www.FreeRTOS.org - Documentation, latest information, license and
\r
41 http://www.SafeRTOS.com - A version that is certified for use in safety
\r
44 http://www.OpenRTOS.com - Commercial support, development, porting,
\r
45 licensing and training services.
\r
48 /*-----------------------------------------------------------
\r
49 * Characters on the LCD are used to simulate LED's. In this case the 'ParTest'
\r
50 * is really operating on the LCD display.
\r
51 *-----------------------------------------------------------*/
\r
54 * This demo is configured to execute on the ES449 prototyping board from
\r
55 * SoftBaugh. The ES449 has a built in LCD display and a single built in user
\r
56 * LED. Therefore, in place of flashing an LED, the 'flash' and 'check' tasks
\r
57 * toggle '*' characters on the LCD. The left most '*' represents LED 0, the
\r
60 * There is a single genuine on board LED referenced as LED 10.
\r
63 /* Standard includes. */
\r
66 /* Scheduler includes. */
\r
67 #include "FreeRTOS.h"
\r
70 /* Demo application includes. */
\r
71 #include "partest.h"
\r
73 /* Constants required to setup the LCD. */
\r
74 #define LCD_DIV_64 5
\r
76 /* Constants required to access the "LED's". The LED segments are turned on
\r
77 and off to generate '*' characters. */
\r
78 #define partstNUM_LEDS ( ( unsigned portCHAR ) 6 )
\r
79 #define partstSEGMENTS_ON ( ( unsigned portCHAR ) 0x0f )
\r
80 #define partstSEGMENTS_OFF ( ( unsigned portCHAR ) 0x00 )
\r
82 /* The LED number of the real on board LED, rather than a simulated LED. */
\r
83 #define partstON_BOARD_LED ( ( unsigned portBASE_TYPE ) 10 )
\r
84 #define mainON_BOARD_LED_BIT ( ( unsigned portCHAR ) 0x01 )
\r
86 /* The LCD segments used to generate the '*' characters for LED's 0 to 5. */
\r
87 unsigned portCHAR * const ucRHSSegments[ partstNUM_LEDS ] = { ( unsigned portCHAR * )0xa4,
\r
88 ( unsigned portCHAR * )0xa2,
\r
89 ( unsigned portCHAR * )0xa0,
\r
90 ( unsigned portCHAR * )0x9e,
\r
91 ( unsigned portCHAR * )0x9c,
\r
92 ( unsigned portCHAR * )0x9a };
\r
94 unsigned portCHAR * const ucLHSSegments[ partstNUM_LEDS ] = { ( unsigned portCHAR * )0xa3,
\r
95 ( unsigned portCHAR * )0xa1,
\r
96 ( unsigned portCHAR * )0x9f,
\r
97 ( unsigned portCHAR * )0x9d,
\r
98 ( unsigned portCHAR * )0x9b,
\r
99 ( unsigned portCHAR * )0x99 };
\r
102 * Toggle the single genuine built in LED.
\r
104 static void prvToggleOnBoardLED( void );
\r
106 /*-----------------------------------------------------------*/
\r
108 void vParTestInitialise( void )
\r
110 /* Initialise the LCD hardware. */
\r
112 /* Used for the onboard LED. */
\r
115 // Setup Basic Timer for LCD operation
\r
116 BTCTL = (LCD_DIV_64+0x23);
\r
118 // Setup port functions
\r
125 /* Initialise all segments to off. */
\r
126 LCDM1 = partstSEGMENTS_OFF;
\r
127 LCDM2 = partstSEGMENTS_OFF;
\r
128 LCDM3 = partstSEGMENTS_OFF;
\r
129 LCDM4 = partstSEGMENTS_OFF;
\r
130 LCDM5 = partstSEGMENTS_OFF;
\r
131 LCDM6 = partstSEGMENTS_OFF;
\r
132 LCDM7 = partstSEGMENTS_OFF;
\r
133 LCDM8 = partstSEGMENTS_OFF;
\r
134 LCDM9 = partstSEGMENTS_OFF;
\r
135 LCDM10 = partstSEGMENTS_OFF;
\r
136 LCDM11 = partstSEGMENTS_OFF;
\r
137 LCDM12 = partstSEGMENTS_OFF;
\r
138 LCDM13 = partstSEGMENTS_OFF;
\r
139 LCDM14 = partstSEGMENTS_OFF;
\r
140 LCDM15 = partstSEGMENTS_OFF;
\r
141 LCDM16 = partstSEGMENTS_OFF;
\r
142 LCDM17 = partstSEGMENTS_OFF;
\r
143 LCDM18 = partstSEGMENTS_OFF;
\r
144 LCDM19 = partstSEGMENTS_OFF;
\r
145 LCDM20 = partstSEGMENTS_OFF;
\r
147 /* Setup LCD control. */
\r
148 LCDCTL = (LCDSG0_7|LCD4MUX|LCDON);
\r
150 /*-----------------------------------------------------------*/
\r
152 void vParTestSetLED( unsigned portBASE_TYPE uxLED, signed portBASE_TYPE xValue )
\r
154 /* Set or clear the output [in this case show or hide the '*' character. */
\r
155 if( uxLED < ( portBASE_TYPE ) partstNUM_LEDS )
\r
161 /* Turn on the segments required to show the '*'. */
\r
162 *( ucRHSSegments[ uxLED ] ) = partstSEGMENTS_ON;
\r
163 *( ucLHSSegments[ uxLED ] ) = partstSEGMENTS_ON;
\r
167 /* Turn off all the segments. */
\r
168 *( ucRHSSegments[ uxLED ] ) = partstSEGMENTS_OFF;
\r
169 *( ucLHSSegments[ uxLED ] ) = partstSEGMENTS_OFF;
\r
175 /*-----------------------------------------------------------*/
\r
177 void vParTestToggleLED( unsigned portBASE_TYPE uxLED )
\r
179 if( uxLED < ( portBASE_TYPE ) partstNUM_LEDS )
\r
183 /* If the '*' is already showing - hide it. If it is not already
\r
184 showing then show it. */
\r
185 if( *( ucRHSSegments[ uxLED ] ) )
\r
187 *( ucRHSSegments[ uxLED ] ) = partstSEGMENTS_OFF;
\r
188 *( ucLHSSegments[ uxLED ] ) = partstSEGMENTS_OFF;
\r
192 *( ucRHSSegments[ uxLED ] ) = partstSEGMENTS_ON;
\r
193 *( ucLHSSegments[ uxLED ] ) = partstSEGMENTS_ON;
\r
200 if( uxLED == partstON_BOARD_LED )
\r
202 /* The request related to the genuine on board LED. */
\r
203 prvToggleOnBoardLED();
\r
207 /*-----------------------------------------------------------*/
\r
209 static void prvToggleOnBoardLED( void )
\r
211 static unsigned portSHORT sState = pdFALSE;
\r
213 /* Toggle the state of the single genuine on board LED. */
\r
216 P1OUT |= mainON_BOARD_LED_BIT;
\r
220 P1OUT &= ~mainON_BOARD_LED_BIT;
\r
225 /*-----------------------------------------------------------*/
\r