2 FreeRTOS.org V5.1.1 - Copyright (C) 2003-2008 Richard Barry.
\r
4 This file is part of the FreeRTOS.org distribution.
\r
6 FreeRTOS.org is free software; you can redistribute it and/or modify
\r
7 it under the terms of the GNU General Public License as published by
\r
8 the Free Software Foundation; either version 2 of the License, or
\r
9 (at your option) any later version.
\r
11 FreeRTOS.org is distributed in the hope that it will be useful,
\r
12 but WITHOUT ANY WARRANTY; without even the implied warranty of
\r
13 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
\r
14 GNU General Public License for more details.
\r
16 You should have received a copy of the GNU General Public License
\r
17 along with FreeRTOS.org; if not, write to the Free Software
\r
18 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
\r
20 A special exception to the GPL can be applied should you wish to distribute
\r
21 a combined work that includes FreeRTOS.org, without being obliged to provide
\r
22 the source code for any proprietary components. See the licensing section
\r
23 of http://www.FreeRTOS.org for full details of how and when the exception
\r
26 ***************************************************************************
\r
27 ***************************************************************************
\r
29 * SAVE TIME AND MONEY! We can port FreeRTOS.org to your own hardware, *
\r
30 * and even write all or part of your application on your behalf. *
\r
31 * See http://www.OpenRTOS.com for details of the services we provide to *
\r
32 * expedite your project. *
\r
34 ***************************************************************************
\r
35 ***************************************************************************
\r
37 Please ensure to read the configuration and relevant port sections of the
\r
38 online documentation.
\r
40 http://www.FreeRTOS.org - Documentation, latest information, license and
\r
43 http://www.SafeRTOS.com - A version that is certified for use in safety
\r
46 http://www.OpenRTOS.com - Commercial support, development, porting,
\r
47 licensing and training services.
\r
51 * Creates all the demo application tasks, then starts the scheduler. The WEB
\r
52 * documentation provides more details of the demo application tasks.
\r
54 * This demo is configured to execute on the ES449 prototyping board from
\r
55 * SoftBaugh. The ES449 has a built in LCD display and a single built in user
\r
56 * LED. Therefore, in place of flashing an LED, the 'flash' and 'check' tasks
\r
57 * toggle '*' characters on the LCD. The left most '*' represents LED 0, the
\r
60 * Main. c also creates a task called 'Check'. This only executes every three
\r
61 * seconds but has the highest priority so is guaranteed to get processor time.
\r
62 * Its main function is to check that all the other tasks are still operational.
\r
63 * Each task that does not flash an LED maintains a unique count that is
\r
64 * incremented each time the task successfully completes its function. Should
\r
65 * any error occur within such a task the count is permanently halted. The
\r
66 * 'check' task inspects the count of each task to ensure it has changed since
\r
67 * the last time the check task executed. If all the count variables have
\r
68 * changed all the tasks are still executing error free, and the check task
\r
69 * toggles an LED with a three second period. Should any task contain an error
\r
70 * at any time the LED toggle rate will increase to 500ms.
\r
72 * Please read the documentation for the MSP430 port available on
\r
73 * http://www.FreeRTOS.org.
\r
76 /* Standard includes. */
\r
80 /* Scheduler includes. */
\r
81 #include "FreeRTOS.h"
\r
84 /* Demo application includes. */
\r
85 #include "partest.h"
\r
87 #include "integer.h"
\r
88 #include "comtest2.h"
\r
91 /* Constants required for hardware setup. */
\r
92 #define mainALL_BITS_OUTPUT ( ( unsigned portCHAR ) 0xff )
\r
93 #define mainMAX_FREQUENCY ( ( unsigned portCHAR ) 121 )
\r
95 /* Constants that define the LED's used by the various tasks. [in this case
\r
96 the '*' characters on the LCD represent LED's] */
\r
97 #define mainCHECK_LED ( 4 )
\r
98 #define mainCOM_TEST_LED ( 10 )
\r
100 /* Demo task priorities. */
\r
101 #define mainCHECK_TASK_PRIORITY ( tskIDLE_PRIORITY + 3 )
\r
102 #define mainCOM_TEST_PRIORITY ( tskIDLE_PRIORITY + 2 )
\r
103 #define mainQUEUE_POLL_PRIORITY ( tskIDLE_PRIORITY + 2 )
\r
104 #define mainLED_TASK_PRIORITY ( tskIDLE_PRIORITY + 1 )
\r
106 /* Baud rate used by the COM test tasks. */
\r
107 #define mainCOM_TEST_BAUD_RATE ( ( unsigned portLONG ) 19200 )
\r
109 /* The frequency at which the 'Check' tasks executes. See the comments at the
\r
110 top of the page. When the system is operating error free the 'Check' task
\r
111 toggles an LED every three seconds. If an error is discovered in any task the
\r
112 rate is increased to 500 milliseconds. [in this case the '*' characters on the
\r
113 LCD represent LED's]*/
\r
114 #define mainNO_ERROR_CHECK_DELAY ( ( portTickType ) 3000 / portTICK_RATE_MS )
\r
115 #define mainERROR_CHECK_DELAY ( ( portTickType ) 500 / portTICK_RATE_MS )
\r
118 * The function that implements the Check task. See the comments at the head
\r
119 * of the page for implementation details.
\r
121 static void vErrorChecks( void *pvParameters );
\r
124 * Called by the Check task. Returns pdPASS if all the other tasks are found
\r
125 * to be operating without error - otherwise returns pdFAIL.
\r
127 static portSHORT prvCheckOtherTasksAreStillRunning( void );
\r
130 * Perform the hardware setup required by the ES449 in order to run the demo
\r
133 static void prvSetupHardware( void );
\r
135 /* Used to detect the idle hook function stalling. */
\r
136 static volatile unsigned portLONG ulIdleLoops = 0UL;
\r
138 /*-----------------------------------------------------------*/
\r
141 * Start the demo application tasks - then start the real time scheduler.
\r
145 /* Setup the hardware ready for the demo. */
\r
146 prvSetupHardware();
\r
147 vParTestInitialise();
\r
149 /* Start the standard demo application tasks. */
\r
150 vStartLEDFlashTasks( mainLED_TASK_PRIORITY );
\r
151 vStartIntegerMathTasks( tskIDLE_PRIORITY );
\r
152 vAltStartComTestTasks( mainCOM_TEST_PRIORITY, mainCOM_TEST_BAUD_RATE, mainCOM_TEST_LED - 1 );
\r
153 vStartPolledQueueTasks( mainQUEUE_POLL_PRIORITY );
\r
155 /* Start the 'Check' task which is defined in this file. */
\r
156 xTaskCreate( vErrorChecks, "Check", configMINIMAL_STACK_SIZE, NULL, mainCHECK_TASK_PRIORITY, NULL );
\r
158 /* Start the scheduler. */
\r
159 vTaskStartScheduler();
\r
161 /* As the scheduler has been started the demo applications tasks will be
\r
162 executing and we should never get here! */
\r
165 /*-----------------------------------------------------------*/
\r
167 static void vErrorChecks( void *pvParameters )
\r
169 static volatile unsigned portLONG ulDummyVariable = 3UL;
\r
170 portTickType xDelayPeriod = mainNO_ERROR_CHECK_DELAY;
\r
172 /* Cycle for ever, delaying then checking all the other tasks are still
\r
173 operating without error. */
\r
176 /* Wait until it is time to check again. The time we wait here depends
\r
177 on whether an error has been detected or not. When an error is
\r
178 detected the time is shortened resulting in a faster LED flash rate. */
\r
179 vTaskDelay( xDelayPeriod );
\r
181 /* Perform a bit of 32bit maths to ensure the registers used by the
\r
182 integer tasks get some exercise outside of the integer tasks
\r
183 themselves. The result here is not important we are just deliberately
\r
184 changing registers used by other tasks to ensure that their context
\r
185 switch is operating as required. - see the demo application
\r
186 documentation for more info. */
\r
187 ulDummyVariable *= 3UL;
\r
189 /* See if the other tasks are all ok. */
\r
190 if( prvCheckOtherTasksAreStillRunning() != pdPASS )
\r
192 /* An error occurred in one of the tasks so shorten the delay
\r
193 period - which has the effect of increasing the frequency of the
\r
195 xDelayPeriod = mainERROR_CHECK_DELAY;
\r
199 vParTestToggleLED( mainCHECK_LED );
\r
202 /*-----------------------------------------------------------*/
\r
204 static portSHORT prvCheckOtherTasksAreStillRunning( void )
\r
206 static portSHORT sNoErrorFound = pdTRUE;
\r
207 static unsigned portLONG ulLastIdleLoops = 0UL;
\r
209 /* The demo tasks maintain a count that increments every cycle of the task
\r
210 provided that the task has never encountered an error. This function
\r
211 checks the counts maintained by the tasks to ensure they are still being
\r
212 incremented. A count remaining at the same value between calls therefore
\r
213 indicates that an error has been detected. Only tasks that do not flash
\r
214 an LED are checked. */
\r
216 if( xAreIntegerMathsTaskStillRunning() != pdTRUE )
\r
218 sNoErrorFound = pdFALSE;
\r
221 if( xAreComTestTasksStillRunning() != pdTRUE )
\r
223 sNoErrorFound = pdFALSE;
\r
226 if( xArePollingQueuesStillRunning() != pdTRUE )
\r
228 sNoErrorFound = pdFALSE;
\r
231 if( ulLastIdleLoops == ulIdleLoops )
\r
233 sNoErrorFound = pdFALSE;
\r
236 ulLastIdleLoops = ulIdleLoops;
\r
238 return sNoErrorFound;
\r
240 /*-----------------------------------------------------------*/
\r
242 static void prvSetupHardware( void )
\r
244 /* Stop the watchdog. */
\r
245 WDTCTL = WDTPW + WDTHOLD;
\r
247 /* Setup DCO+ for ( xtal * D * (N + 1) ) operation. */
\r
248 FLL_CTL0 |= DCOPLUS + XCAP18PF;
\r
250 /* X2 DCO frequency, 8MHz nominal DCO */
\r
253 /* (121+1) x 32768 x 2 = 7.99 Mhz */
\r
254 SCFQCTL = mainMAX_FREQUENCY;
\r
256 /* Setup the IO as per the SoftBaugh demo for the same target hardware. */
\r
263 /*-----------------------------------------------------------*/
\r
265 void vApplicationIdleHook( void );
\r
266 void vApplicationIdleHook( void )
\r
268 /* Simple put the CPU into lowpower mode. */
\r
269 _BIS_SR( LPM3_bits );
\r
272 /*-----------------------------------------------------------*/
\r