2 FreeRTOS.org V4.8.0 - Copyright (C) 2003-2008 Richard Barry.
\r
4 This file is part of the FreeRTOS.org distribution.
\r
6 FreeRTOS.org is free software; you can redistribute it and/or modify
\r
7 it under the terms of the GNU General Public License as published by
\r
8 the Free Software Foundation; either version 2 of the License, or
\r
9 (at your option) any later version.
\r
11 FreeRTOS.org is distributed in the hope that it will be useful,
\r
12 but WITHOUT ANY WARRANTY; without even the implied warranty of
\r
13 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
\r
14 GNU General Public License for more details.
\r
16 You should have received a copy of the GNU General Public License
\r
17 along with FreeRTOS.org; if not, write to the Free Software
\r
18 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
\r
20 A special exception to the GPL can be applied should you wish to distribute
\r
21 a combined work that includes FreeRTOS.org, without being obliged to provide
\r
22 the source code for any proprietary components. See the licensing section
\r
23 of http://www.FreeRTOS.org for full details of how and when the exception
\r
26 ***************************************************************************
\r
27 ***************************************************************************
\r
29 * SAVE TIME AND MONEY! We can port FreeRTOS.org to your own hardware, *
\r
30 * and even write all or part of your application on your behalf. *
\r
31 * See http://www.OpenRTOS.com for details of the services we provide to *
\r
32 * expedite your project. *
\r
34 ***************************************************************************
\r
35 ***************************************************************************
\r
37 Please ensure to read the configuration and relevant port sections of the
\r
38 online documentation.
\r
40 http://www.FreeRTOS.org - Documentation, latest information, license and
\r
43 http://www.SafeRTOS.com - A version that is certified for use in safety
\r
46 http://www.OpenRTOS.com - Commercial support, development, porting,
\r
47 licensing and training services.
\r
51 /* BASIC INTERRUPT DRIVEN SERIAL PORT DRIVER.
\r
53 * This file only supports UART 1
\r
56 /* Standard includes. */
\r
60 /* Scheduler includes. */
\r
61 #include "FreeRTOS.h"
\r
65 /* Demo application includes. */
\r
68 /* Constants required to setup the hardware. */
\r
69 #define serTX_AND_RX ( ( unsigned portCHAR ) 0x03 )
\r
71 /* Misc. constants. */
\r
72 #define serNO_BLOCK ( ( portTickType ) 0 )
\r
74 /* Enable the UART Tx interrupt. */
\r
75 #define vInterruptOn() IFG2 |= UTXIFG1
\r
77 /* The queue used to hold received characters. */
\r
78 static xQueueHandle xRxedChars;
\r
80 /* The queue used to hold characters waiting transmission. */
\r
81 static xQueueHandle xCharsForTx;
\r
83 static volatile portSHORT sTHREEmpty;
\r
85 /* Interrupt service routines. */
\r
86 interrupt (UART1RX_VECTOR) vRxISR( void );
\r
87 interrupt (UART1TX_VECTOR) vTxISR( void );
\r
89 /*-----------------------------------------------------------*/
\r
91 xComPortHandle xSerialPortInitMinimal( unsigned portLONG ulWantedBaud, unsigned portBASE_TYPE uxQueueLength )
\r
93 unsigned portLONG ulBaudRateCount;
\r
95 /* Initialise the hardware. */
\r
97 /* Generate the baud rate constants for the wanted baud rate. */
\r
98 ulBaudRateCount = configCPU_CLOCK_HZ / ulWantedBaud;
\r
100 portENTER_CRITICAL();
\r
102 /* Create the queues used by the com test task. */
\r
103 xRxedChars = xQueueCreate( uxQueueLength, ( unsigned portBASE_TYPE ) sizeof( signed portCHAR ) );
\r
104 xCharsForTx = xQueueCreate( uxQueueLength, ( unsigned portBASE_TYPE ) sizeof( signed portCHAR ) );
\r
109 /* Set pin function. */
\r
110 P4SEL |= serTX_AND_RX;
\r
112 /* All other bits remain at zero for n, 8, 1 interrupt driven operation.
\r
114 U1CTL |= CHAR + LISTEN;
\r
117 /* Setup baud rate low byte. */
\r
118 U1BR0 = ( unsigned portCHAR ) ( ulBaudRateCount & ( unsigned portLONG ) 0xff );
\r
120 /* Setup baud rate high byte. */
\r
121 ulBaudRateCount >>= 8UL;
\r
122 U1BR1 = ( unsigned portCHAR ) ( ulBaudRateCount & ( unsigned portLONG ) 0xff );
\r
124 /* Enable ports. */
\r
125 ME2 |= UTXE1 + URXE1;
\r
130 /* Nothing in the buffer yet. */
\r
131 sTHREEmpty = pdTRUE;
\r
133 /* Enable interrupts. */
\r
134 IE2 |= URXIE1 + UTXIE1;
\r
136 portEXIT_CRITICAL();
\r
138 /* Unlike other ports, this serial code does not allow for more than one
\r
139 com port. We therefore don't return a pointer to a port structure and can
\r
140 instead just return NULL. */
\r
143 /*-----------------------------------------------------------*/
\r
145 signed portBASE_TYPE xSerialGetChar( xComPortHandle pxPort, signed portCHAR *pcRxedChar, portTickType xBlockTime )
\r
147 /* Get the next character from the buffer. Return false if no characters
\r
148 are available, or arrive before xBlockTime expires. */
\r
149 if( xQueueReceive( xRxedChars, pcRxedChar, xBlockTime ) )
\r
158 /*-----------------------------------------------------------*/
\r
160 signed portBASE_TYPE xSerialPutChar( xComPortHandle pxPort, signed portCHAR cOutChar, portTickType xBlockTime )
\r
162 signed portBASE_TYPE xReturn;
\r
164 /* Transmit a character. */
\r
166 portENTER_CRITICAL();
\r
168 if( sTHREEmpty == pdTRUE )
\r
170 /* If sTHREEmpty is true then the UART Tx ISR has indicated that
\r
171 there are no characters queued to be transmitted - so we can
\r
172 write the character directly to the shift Tx register. */
\r
173 sTHREEmpty = pdFALSE;
\r
174 U1TXBUF = cOutChar;
\r
179 /* sTHREEmpty is false, so there are still characters waiting to be
\r
180 transmitted. We have to queue this character so it gets
\r
181 transmitted in turn. */
\r
183 /* Return false if after the block time there is no room on the Tx
\r
184 queue. It is ok to block inside a critical section as each task
\r
185 maintains it's own critical section status. */
\r
186 xReturn = xQueueSend( xCharsForTx, &cOutChar, xBlockTime );
\r
188 /* Depending on queue sizing and task prioritisation: While we
\r
189 were blocked waiting to post on the queue interrupts were not
\r
190 disabled. It is possible that the serial ISR has emptied the
\r
191 Tx queue, in which case we need to start the Tx off again
\r
192 writing directly to the Tx register. */
\r
193 if( ( sTHREEmpty == pdTRUE ) && ( xReturn == pdPASS ) )
\r
195 /* Get back the character we just posted. */
\r
196 xQueueReceive( xCharsForTx, &cOutChar, serNO_BLOCK );
\r
197 sTHREEmpty = pdFALSE;
\r
198 U1TXBUF = cOutChar;
\r
202 portEXIT_CRITICAL();
\r
206 /*-----------------------------------------------------------*/
\r
209 * UART RX interrupt service routine.
\r
211 interrupt (UART1RX_VECTOR) vRxISR( void )
\r
213 signed portCHAR cChar;
\r
214 portBASE_TYPE xHigherPriorityTaskWoken = pdFALSE;
\r
216 /* Get the character from the UART and post it on the queue of Rxed
\r
220 xQueueSendFromISR( xRxedChars, &cChar, &xHigherPriorityTaskWoken );
\r
222 if( xHigherPriorityTaskWoken )
\r
224 /*If the post causes a task to wake force a context switch
\r
225 as the woken task may have a higher priority than the task we have
\r
230 /*-----------------------------------------------------------*/
\r
233 * UART Tx interrupt service routine.
\r
235 interrupt (UART1TX_VECTOR) vTxISR( void )
\r
237 signed portCHAR cChar;
\r
238 portBASE_TYPE xTaskWoken;
\r
240 /* The previous character has been transmitted. See if there are any
\r
241 further characters waiting transmission. */
\r
243 if( xQueueReceiveFromISR( xCharsForTx, &cChar, &xTaskWoken ) == pdTRUE )
\r
245 /* There was another character queued - transmit it now. */
\r
250 /* There were no other characters to transmit. */
\r
251 sTHREEmpty = pdTRUE;
\r