2 FreeRTOS V7.0.2 - Copyright (C) 2011 Real Time Engineers Ltd.
\r
5 ***************************************************************************
\r
7 * FreeRTOS tutorial books are available in pdf and paperback. *
\r
8 * Complete, revised, and edited pdf reference manuals are also *
\r
11 * Purchasing FreeRTOS documentation will not only help you, by *
\r
12 * ensuring you get running as quickly as possible and with an *
\r
13 * in-depth knowledge of how to use FreeRTOS, it will also help *
\r
14 * the FreeRTOS project to continue with its mission of providing *
\r
15 * professional grade, cross platform, de facto standard solutions *
\r
16 * for microcontrollers - completely free of charge! *
\r
18 * >>> See http://www.FreeRTOS.org/Documentation for details. <<< *
\r
20 * Thank you for using FreeRTOS, and thank you for your support! *
\r
22 ***************************************************************************
\r
25 This file is part of the FreeRTOS distribution.
\r
27 FreeRTOS is free software; you can redistribute it and/or modify it under
\r
28 the terms of the GNU General Public License (version 2) as published by the
\r
29 Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
\r
30 >>>NOTE<<< The modification to the GPL is included to allow you to
\r
31 distribute a combined work that includes FreeRTOS without being obliged to
\r
32 provide the source code for proprietary components outside of the FreeRTOS
\r
33 kernel. FreeRTOS is distributed in the hope that it will be useful, but
\r
34 WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
\r
35 or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
\r
36 more details. You should have received a copy of the GNU General Public
\r
37 License and the FreeRTOS license exception along with FreeRTOS; if not it
\r
38 can be viewed here: http://www.freertos.org/a00114.html and also obtained
\r
39 by writing to Richard Barry, contact details for whom are available on the
\r
44 http://www.FreeRTOS.org - Documentation, latest information, license and
\r
47 http://www.SafeRTOS.com - A version that is certified for use in safety
\r
50 http://www.OpenRTOS.com - Commercial support, development, porting,
\r
51 licensing and training services.
\r
55 /* BASIC INTERRUPT DRIVEN SERIAL PORT DRIVER.
\r
57 * This file only supports UART 1
\r
60 /* Standard includes. */
\r
63 /* Scheduler includes. */
\r
64 #include "FreeRTOS.h"
\r
68 /* Demo application includes. */
\r
71 /* Constants required to setup the hardware. */
\r
72 #define serTX_AND_RX ( ( unsigned portCHAR ) 0x03 )
\r
74 /* Misc. constants. */
\r
75 #define serNO_BLOCK ( ( portTickType ) 0 )
\r
77 /* Enable the UART Tx interrupt. */
\r
78 #define vInterruptOn() IFG2 |= UTXIFG1
\r
80 /* The queue used to hold received characters. */
\r
81 static xQueueHandle xRxedChars;
\r
83 /* The queue used to hold characters waiting transmission. */
\r
84 static xQueueHandle xCharsForTx;
\r
86 static volatile portSHORT sTHREEmpty;
\r
88 /*-----------------------------------------------------------*/
\r
90 xComPortHandle xSerialPortInitMinimal( unsigned portLONG ulWantedBaud, unsigned portBASE_TYPE uxQueueLength )
\r
92 unsigned portLONG ulBaudRateCount;
\r
94 /* Initialise the hardware. */
\r
96 /* Generate the baud rate constants for the wanted baud rate. */
\r
97 ulBaudRateCount = configCPU_CLOCK_HZ / ulWantedBaud;
\r
99 portENTER_CRITICAL();
\r
101 /* Create the queues used by the com test task. */
\r
102 xRxedChars = xQueueCreate( uxQueueLength, ( unsigned portBASE_TYPE ) sizeof( signed portCHAR ) );
\r
103 xCharsForTx = xQueueCreate( uxQueueLength, ( unsigned portBASE_TYPE ) sizeof( signed portCHAR ) );
\r
108 /* Set pin function. */
\r
109 P4SEL |= serTX_AND_RX;
\r
111 /* All other bits remain at zero for n, 8, 1 interrupt driven operation.
\r
113 U1CTL |= CHAR + LISTEN;
\r
116 /* Setup baud rate low byte. */
\r
117 U1BR0 = ( unsigned portCHAR ) ( ulBaudRateCount & ( unsigned portLONG ) 0xff );
\r
119 /* Setup baud rate high byte. */
\r
120 ulBaudRateCount >>= 8UL;
\r
121 U1BR1 = ( unsigned portCHAR ) ( ulBaudRateCount & ( unsigned portLONG ) 0xff );
\r
123 /* Enable ports. */
\r
124 ME2 |= UTXE1 + URXE1;
\r
129 /* Nothing in the buffer yet. */
\r
130 sTHREEmpty = pdTRUE;
\r
132 /* Enable interrupts. */
\r
133 IE2 |= URXIE1 + UTXIE1;
\r
135 portEXIT_CRITICAL();
\r
137 /* Unlike other ports, this serial code does not allow for more than one
\r
138 com port. We therefore don't return a pointer to a port structure and can
\r
139 instead just return NULL. */
\r
142 /*-----------------------------------------------------------*/
\r
144 signed portBASE_TYPE xSerialGetChar( xComPortHandle pxPort, signed portCHAR *pcRxedChar, portTickType xBlockTime )
\r
146 /* Get the next character from the buffer. Return false if no characters
\r
147 are available, or arrive before xBlockTime expires. */
\r
148 if( xQueueReceive( xRxedChars, pcRxedChar, xBlockTime ) )
\r
157 /*-----------------------------------------------------------*/
\r
159 signed portBASE_TYPE xSerialPutChar( xComPortHandle pxPort, signed portCHAR cOutChar, portTickType xBlockTime )
\r
161 signed portBASE_TYPE xReturn;
\r
163 /* Transmit a character. */
\r
165 portENTER_CRITICAL();
\r
167 if( sTHREEmpty == pdTRUE )
\r
169 /* If sTHREEmpty is true then the UART Tx ISR has indicated that
\r
170 there are no characters queued to be transmitted - so we can
\r
171 write the character directly to the shift Tx register. */
\r
172 sTHREEmpty = pdFALSE;
\r
173 U1TXBUF = cOutChar;
\r
178 /* sTHREEmpty is false, so there are still characters waiting to be
\r
179 transmitted. We have to queue this character so it gets
\r
180 transmitted in turn. */
\r
182 /* Return false if after the block time there is no room on the Tx
\r
183 queue. It is ok to block inside a critical section as each task
\r
184 maintains it's own critical section status. */
\r
185 xReturn = xQueueSend( xCharsForTx, &cOutChar, xBlockTime );
\r
187 /* Depending on queue sizing and task prioritisation: While we
\r
188 were blocked waiting to post on the queue interrupts were not
\r
189 disabled. It is possible that the serial ISR has emptied the
\r
190 Tx queue, in which case we need to start the Tx off again
\r
191 writing directly to the Tx register. */
\r
192 if( ( sTHREEmpty == pdTRUE ) && ( xReturn == pdPASS ) )
\r
194 /* Get back the character we just posted. */
\r
195 xQueueReceive( xCharsForTx, &cOutChar, serNO_BLOCK );
\r
196 sTHREEmpty = pdFALSE;
\r
197 U1TXBUF = cOutChar;
\r
201 portEXIT_CRITICAL();
\r
205 /*-----------------------------------------------------------*/
\r
207 #if configINTERRUPT_EXAMPLE_METHOD == 1
\r
210 * UART RX interrupt service routine.
\r
212 #pragma vector=UART1RX_VECTOR
\r
213 __interrupt void vRxISR( void )
\r
215 signed portCHAR cChar;
\r
216 portBASE_TYPE xHigherPriorityTaskWoken = pdFALSE;
\r
218 /* Get the character from the UART and post it on the queue of Rxed
\r
222 xQueueSendFromISR( xRxedChars, &cChar, &xHigherPriorityTaskWoken );
\r
224 if( xHigherPriorityTaskWoken )
\r
226 /*If the post causes a task to wake force a context switch
\r
227 as the woken task may have a higher priority than the task we have
\r
232 /* Make sure any low power mode bits are clear before leaving the ISR. */
\r
233 __bic_SR_register_on_exit( SCG1 + SCG0 + OSCOFF + CPUOFF );
\r
235 /*-----------------------------------------------------------*/
\r
238 * UART Tx interrupt service routine.
\r
240 #pragma vector=UART1TX_VECTOR
\r
241 __interrupt void vTxISR( void )
\r
243 signed portCHAR cChar;
\r
244 portBASE_TYPE xTaskWoken = pdFALSE;
\r
246 /* The previous character has been transmitted. See if there are any
\r
247 further characters waiting transmission. */
\r
249 if( xQueueReceiveFromISR( xCharsForTx, &cChar, &xTaskWoken ) == pdTRUE )
\r
251 /* There was another character queued - transmit it now. */
\r
256 /* There were no other characters to transmit. */
\r
257 sTHREEmpty = pdTRUE;
\r
260 /* Make sure any low power mode bits are clear before leaving the ISR. */
\r
261 __bic_SR_register_on_exit( SCG1 + SCG0 + OSCOFF + CPUOFF );
\r
263 /*-----------------------------------------------------------*/
\r
265 #elif configINTERRUPT_EXAMPLE_METHOD == 2
\r
267 /* This is a standard C function as an assembly file wrapper is used as an
\r
268 interrupt entry point. */
\r
269 void vRxISR( void )
\r
271 signed portCHAR cChar;
\r
272 portBASE_TYPE xHigherPriorityTaskWoken = pdFALSE;
\r
274 /* Get the character from the UART and post it on the queue of Rxed
\r
278 xQueueSendFromISR( xRxedChars, &cChar, &xHigherPriorityTaskWoken );
\r
280 /*If the post causes a task to wake force a context switch
\r
281 as the woken task may have a higher priority than the task we have
\r
283 portYIELD_FROM_ISR( xHigherPriorityTaskWoken );
\r
285 /*-----------------------------------------------------------*/
\r
287 /* This is a standard C function as an assembly file wrapper is used as an
\r
288 interrupt entry point. */
\r
289 void vTxISR( void )
\r
291 signed portCHAR cChar;
\r
292 portBASE_TYPE xTaskWoken = pdFALSE;
\r
294 /* The previous character has been transmitted. See if there are any
\r
295 further characters waiting transmission. */
\r
297 if( xQueueReceiveFromISR( xCharsForTx, &cChar, &xTaskWoken ) == pdTRUE )
\r
299 /* There was another character queued - transmit it now. */
\r
304 /* There were no other characters to transmit. */
\r
305 sTHREEmpty = pdTRUE;
\r
309 #endif /* configINTERRUPT_EXAMPLE_METHOD */
\r
310 /*-----------------------------------------------------------*/
\r