7 * \defgroup uiparp uIP Address Resolution Protocol
\r
10 * The Address Resolution Protocol ARP is used for mapping between IP
\r
11 * addresses and link level addresses such as the Ethernet MAC
\r
12 * addresses. ARP uses broadcast queries to ask for the link level
\r
13 * address of a known IP address and the host which is configured with
\r
14 * the IP address for which the query was meant, will respond with its
\r
15 * link level address.
\r
17 * \note This ARP implementation only supports Ethernet.
\r
22 * Implementation of the ARP Address Resolution Protocol.
\r
23 * \author Adam Dunkels <adam@dunkels.com>
\r
28 * Copyright (c) 2001-2003, Adam Dunkels.
\r
29 * All rights reserved.
\r
31 * Redistribution and use in source and binary forms, with or without
\r
32 * modification, are permitted provided that the following conditions
\r
34 * 1. Redistributions of source code must retain the above copyright
\r
35 * notice, this list of conditions and the following disclaimer.
\r
36 * 2. Redistributions in binary form must reproduce the above copyright
\r
37 * notice, this list of conditions and the following disclaimer in the
\r
38 * documentation and/or other materials provided with the distribution.
\r
39 * 3. The name of the author may not be used to endorse or promote
\r
40 * products derived from this software without specific prior
\r
41 * written permission.
\r
43 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
\r
44 * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
\r
45 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
\r
46 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
\r
47 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
\r
48 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
\r
49 * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
\r
50 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
\r
51 * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
\r
52 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
\r
53 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
\r
55 * This file is part of the uIP TCP/IP stack.
\r
57 * $Id: uip_arp.c,v 1.7.2.3 2003/10/06 22:42:30 adam Exp $
\r
62 #include "uip_arp.h"
\r
67 struct uip_eth_hdr ethhdr;
\r
73 struct uip_eth_addr shwaddr;
\r
75 struct uip_eth_addr dhwaddr;
\r
80 struct uip_eth_hdr ethhdr;
\r
94 #define ARP_REQUEST 1
\r
97 #define ARP_HWTYPE_ETH 1
\r
101 struct uip_eth_addr ethaddr;
\r
105 struct uip_eth_addr uip_ethaddr = {{UIP_ETHADDR0,
\r
112 static struct arp_entry arp_table[UIP_ARPTAB_SIZE];
\r
113 static u16_t ipaddr[2];
\r
116 static u8_t arptime;
\r
117 static u8_t tmpage;
\r
119 #define BUF ((struct arp_hdr *)&uip_buf[0])
\r
120 #define IPBUF ((struct ethip_hdr *)&uip_buf[0])
\r
121 /*-----------------------------------------------------------------------------------*/
\r
123 * Initialize the ARP module.
\r
126 /*-----------------------------------------------------------------------------------*/
\r
130 for(i = 0; i < UIP_ARPTAB_SIZE; ++i) {
\r
131 memset(arp_table[i].ipaddr, 0, 4);
\r
134 /*-----------------------------------------------------------------------------------*/
\r
136 * Periodic ARP processing function.
\r
138 * This function performs periodic timer processing in the ARP module
\r
139 * and should be called at regular intervals. The recommended interval
\r
140 * is 10 seconds between the calls.
\r
143 /*-----------------------------------------------------------------------------------*/
\r
145 uip_arp_timer(void)
\r
147 struct arp_entry *tabptr;
\r
150 for(i = 0; i < UIP_ARPTAB_SIZE; ++i) {
\r
151 tabptr = &arp_table[i];
\r
152 if((tabptr->ipaddr[0] | tabptr->ipaddr[1]) != 0 &&
\r
153 arptime - tabptr->time >= UIP_ARP_MAXAGE) {
\r
154 memset(tabptr->ipaddr, 0, 4);
\r
159 /*-----------------------------------------------------------------------------------*/
\r
161 uip_arp_update(u16_t *ipaddr, struct uip_eth_addr *ethaddr)
\r
163 register struct arp_entry *tabptr;
\r
164 /* Walk through the ARP mapping table and try to find an entry to
\r
165 update. If none is found, the IP -> MAC address mapping is
\r
166 inserted in the ARP table. */
\r
167 for(i = 0; i < UIP_ARPTAB_SIZE; ++i) {
\r
169 tabptr = &arp_table[i];
\r
170 /* Only check those entries that are actually in use. */
\r
171 if(tabptr->ipaddr[0] != 0 &&
\r
172 tabptr->ipaddr[1] != 0) {
\r
174 /* Check if the source IP address of the incoming packet matches
\r
175 the IP address in this ARP table entry. */
\r
176 if(ipaddr[0] == tabptr->ipaddr[0] &&
\r
177 ipaddr[1] == tabptr->ipaddr[1]) {
\r
179 /* An old entry found, update this and return. */
\r
180 memcpy(tabptr->ethaddr.addr, ethaddr->addr, 6);
\r
181 tabptr->time = arptime;
\r
188 /* If we get here, no existing ARP table entry was found, so we
\r
191 /* First, we try to find an unused entry in the ARP table. */
\r
192 for(i = 0; i < UIP_ARPTAB_SIZE; ++i) {
\r
193 tabptr = &arp_table[i];
\r
194 if(tabptr->ipaddr[0] == 0 &&
\r
195 tabptr->ipaddr[1] == 0) {
\r
200 /* If no unused entry is found, we try to find the oldest entry and
\r
202 if(i == UIP_ARPTAB_SIZE) {
\r
205 for(i = 0; i < UIP_ARPTAB_SIZE; ++i) {
\r
206 tabptr = &arp_table[i];
\r
207 if(arptime - tabptr->time > tmpage) {
\r
208 tmpage = arptime - tabptr->time;
\r
215 /* Now, i is the ARP table entry which we will fill with the new
\r
217 memcpy(tabptr->ipaddr, ipaddr, 4);
\r
218 memcpy(tabptr->ethaddr.addr, ethaddr->addr, 6);
\r
219 tabptr->time = arptime;
\r
221 /*-----------------------------------------------------------------------------------*/
\r
223 * ARP processing for incoming IP packets
\r
225 * This function should be called by the device driver when an IP
\r
226 * packet has been received. The function will check if the address is
\r
227 * in the ARP cache, and if so the ARP cache entry will be
\r
228 * refreshed. If no ARP cache entry was found, a new one is created.
\r
230 * This function expects an IP packet with a prepended Ethernet header
\r
231 * in the uip_buf[] buffer, and the length of the packet in the global
\r
232 * variable uip_len.
\r
234 /*-----------------------------------------------------------------------------------*/
\r
238 uip_len -= sizeof(struct uip_eth_hdr);
\r
240 /* Only insert/update an entry if the source IP address of the
\r
241 incoming IP packet comes from a host on the local network. */
\r
242 if((IPBUF->srcipaddr[0] & uip_arp_netmask[0]) !=
\r
243 (uip_hostaddr[0] & uip_arp_netmask[0])) {
\r
246 if((IPBUF->srcipaddr[1] & uip_arp_netmask[1]) !=
\r
247 (uip_hostaddr[1] & uip_arp_netmask[1])) {
\r
250 uip_arp_update(IPBUF->srcipaddr, &(IPBUF->ethhdr.src));
\r
254 /*-----------------------------------------------------------------------------------*/
\r
256 * ARP processing for incoming ARP packets.
\r
258 * This function should be called by the device driver when an ARP
\r
259 * packet has been received. The function will act differently
\r
260 * depending on the ARP packet type: if it is a reply for a request
\r
261 * that we previously sent out, the ARP cache will be filled in with
\r
262 * the values from the ARP reply. If the incoming ARP packet is an ARP
\r
263 * request for our IP address, an ARP reply packet is created and put
\r
264 * into the uip_buf[] buffer.
\r
266 * When the function returns, the value of the global variable uip_len
\r
267 * indicates whether the device driver should send out a packet or
\r
268 * not. If uip_len is zero, no packet should be sent. If uip_len is
\r
269 * non-zero, it contains the length of the outbound packet that is
\r
270 * present in the uip_buf[] buffer.
\r
272 * This function expects an ARP packet with a prepended Ethernet
\r
273 * header in the uip_buf[] buffer, and the length of the packet in the
\r
274 * global variable uip_len.
\r
276 /*-----------------------------------------------------------------------------------*/
\r
277 typedef struct arp_hdr aht;
\r
280 uip_arp_arpin(void)
\r
284 if(uip_len < sizeof(struct arp_hdr)) {
\r
291 switch(BUF->opcode) {
\r
292 case HTONS(ARP_REQUEST):
\r
293 /* ARP request. If it asked for our address, we send out a
\r
295 if(BUF->dipaddr[0] == uip_hostaddr[0] &&
\r
296 BUF->dipaddr[1] == uip_hostaddr[1]) {
\r
297 /* The reply opcode is 2. */
\r
298 BUF->opcode = HTONS(2);
\r
300 memcpy(BUF->dhwaddr.addr, BUF->shwaddr.addr, 6);
\r
301 memcpy(BUF->shwaddr.addr, uip_ethaddr.addr, 6);
\r
302 memcpy(BUF->ethhdr.src.addr, uip_ethaddr.addr, 6);
\r
303 memcpy(BUF->ethhdr.dest.addr, BUF->dhwaddr.addr, 6);
\r
305 BUF->dipaddr[0] = BUF->sipaddr[0];
\r
306 BUF->dipaddr[1] = BUF->sipaddr[1];
\r
307 BUF->sipaddr[0] = uip_hostaddr[0];
\r
308 BUF->sipaddr[1] = uip_hostaddr[1];
\r
311 BUF->ethhdr.type = HTONS(UIP_ETHTYPE_ARP);
\r
312 uip_len = sizeof(struct arp_hdr);
\r
315 case HTONS(ARP_REPLY):
\r
316 /* ARP reply. We insert or update the ARP table if it was meant
\r
318 if(BUF->dipaddr[0] == uip_hostaddr[0] &&
\r
319 BUF->dipaddr[1] == uip_hostaddr[1]) {
\r
321 uip_arp_update(BUF->sipaddr, &BUF->shwaddr);
\r
330 /*-----------------------------------------------------------------------------------*/
\r
332 * Prepend Ethernet header to an outbound IP packet and see if we need
\r
333 * to send out an ARP request.
\r
335 * This function should be called before sending out an IP packet. The
\r
336 * function checks the destination IP address of the IP packet to see
\r
337 * what Ethernet MAC address that should be used as a destination MAC
\r
338 * address on the Ethernet.
\r
340 * If the destination IP address is in the local network (determined
\r
341 * by logical ANDing of netmask and our IP address), the function
\r
342 * checks the ARP cache to see if an entry for the destination IP
\r
343 * address is found. If so, an Ethernet header is prepended and the
\r
344 * function returns. If no ARP cache entry is found for the
\r
345 * destination IP address, the packet in the uip_buf[] is replaced by
\r
346 * an ARP request packet for the IP address. The IP packet is dropped
\r
347 * and it is assumed that they higher level protocols (e.g., TCP)
\r
348 * eventually will retransmit the dropped packet.
\r
350 * If the destination IP address is not on the local network, the IP
\r
351 * address of the default router is used instead.
\r
353 * When the function returns, a packet is present in the uip_buf[]
\r
354 * buffer, and the length of the packet is in the global variable
\r
357 /*-----------------------------------------------------------------------------------*/
\r
361 struct arp_entry *tabptr;
\r
362 /* Find the destination IP address in the ARP table and construct
\r
363 the Ethernet header. If the destination IP addres isn't on the
\r
364 local network, we use the default router's IP address instead.
\r
366 If not ARP table entry is found, we overwrite the original IP
\r
367 packet with an ARP request for the IP address. */
\r
369 /* Check if the destination address is on the local network. */
\r
370 if((IPBUF->destipaddr[0] & uip_arp_netmask[0]) !=
\r
371 (uip_hostaddr[0] & uip_arp_netmask[0]) ||
\r
372 (IPBUF->destipaddr[1] & uip_arp_netmask[1]) !=
\r
373 (uip_hostaddr[1] & uip_arp_netmask[1])) {
\r
374 /* Destination address was not on the local network, so we need to
\r
375 use the default router's IP address instead of the destination
\r
376 address when determining the MAC address. */
\r
377 ipaddr[0] = uip_arp_draddr[0];
\r
378 ipaddr[1] = uip_arp_draddr[1];
\r
380 /* Else, we use the destination IP address. */
\r
381 ipaddr[0] = IPBUF->destipaddr[0];
\r
382 ipaddr[1] = IPBUF->destipaddr[1];
\r
385 for(i = 0; i < UIP_ARPTAB_SIZE; ++i) {
\r
386 tabptr = &arp_table[i];
\r
387 if(ipaddr[0] == tabptr->ipaddr[0] &&
\r
388 ipaddr[1] == tabptr->ipaddr[1])
\r
392 if(i == UIP_ARPTAB_SIZE) {
\r
393 /* The destination address was not in our ARP table, so we
\r
394 overwrite the IP packet with an ARP request. */
\r
396 memset(BUF->ethhdr.dest.addr, 0xff, 6);
\r
397 memset(BUF->dhwaddr.addr, 0x00, 6);
\r
398 memcpy(BUF->ethhdr.src.addr, uip_ethaddr.addr, 6);
\r
399 memcpy(BUF->shwaddr.addr, uip_ethaddr.addr, 6);
\r
401 BUF->dipaddr[0] = ipaddr[0];
\r
402 BUF->dipaddr[1] = ipaddr[1];
\r
403 BUF->sipaddr[0] = uip_hostaddr[0];
\r
404 BUF->sipaddr[1] = uip_hostaddr[1];
\r
405 BUF->opcode = HTONS(ARP_REQUEST); /* ARP request. */
\r
406 BUF->hwtype = HTONS(ARP_HWTYPE_ETH);
\r
407 BUF->protocol = HTONS(UIP_ETHTYPE_IP);
\r
410 BUF->ethhdr.type = HTONS(UIP_ETHTYPE_ARP);
\r
412 uip_appdata = &uip_buf[40 + UIP_LLH_LEN];
\r
414 uip_len = sizeof(struct arp_hdr);
\r
418 /* Build an ethernet header. */
\r
419 memcpy(IPBUF->ethhdr.dest.addr, tabptr->ethaddr.addr, 6);
\r
420 memcpy(IPBUF->ethhdr.src.addr, uip_ethaddr.addr, 6);
\r
422 IPBUF->ethhdr.type = HTONS(UIP_ETHTYPE_IP);
\r
424 uip_len += sizeof(struct uip_eth_hdr);
\r
426 /*-----------------------------------------------------------------------------------*/
\r