2 * FreeRTOS Kernel V10.1.0
\r
3 * Copyright (C) 2018 Amazon.com, Inc. or its affiliates. All Rights Reserved.
\r
5 * Permission is hereby granted, free of charge, to any person obtaining a copy of
\r
6 * this software and associated documentation files (the "Software"), to deal in
\r
7 * the Software without restriction, including without limitation the rights to
\r
8 * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
\r
9 * the Software, and to permit persons to whom the Software is furnished to do so,
\r
10 * subject to the following conditions:
\r
12 * The above copyright notice and this permission notice shall be included in all
\r
13 * copies or substantial portions of the Software.
\r
15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
\r
16 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
\r
17 * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
\r
18 * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
\r
19 * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
\r
20 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
\r
22 * http://www.FreeRTOS.org
\r
23 * http://aws.amazon.com/freertos
\r
25 * 1 tab == 4 spaces!
\r
29 BASIC INTERRUPT DRIVEN SERIAL PORT DRIVER FOR UART0.
\r
33 /*-----------------------------------------------------------
\r
34 * Components that can be compiled to either ARM or THUMB mode are
\r
35 * contained in this file.c The ISR routines, which can only be compiled
\r
36 * to ARM mode, are contained in serialISR.c.
\r
37 *----------------------------------------------------------*/
\r
41 /* Library includes. */
\r
42 #include "75x_uart.h"
\r
43 #include "75x_gpio.h"
\r
44 #include "75x_eic.h"
\r
45 #include "75x_mrcc.h"
\r
47 /* Scheduler includes. */
\r
48 #include "FreeRTOS.h"
\r
51 /* Demo application includes. */
\r
54 #define serINVALID_QUEUE ( ( QueueHandle_t ) 0 )
\r
55 #define serNO_BLOCK ( ( TickType_t ) 0 )
\r
57 /*-----------------------------------------------------------*/
\r
59 /* Queues used to hold received characters, and characters waiting to be
\r
61 static QueueHandle_t xRxedChars;
\r
62 static QueueHandle_t xCharsForTx;
\r
64 static volatile portBASE_TYPE xQueueEmpty = pdTRUE;
\r
66 /*-----------------------------------------------------------*/
\r
68 /* The interrupt service routine - called from the assembly entry point. */
\r
69 void vSerialISR( void );
\r
70 void vConfigureQueues( QueueHandle_t xQForRx, QueueHandle_t xQForTx, volatile portBASE_TYPE *pxEmptyFlag );
\r
72 /*-----------------------------------------------------------*/
\r
75 * See the serial2.h header file.
\r
77 xComPortHandle xSerialPortInitMinimal( unsigned long ulWantedBaud, unsigned portBASE_TYPE uxQueueLength )
\r
79 xComPortHandle xReturn;
\r
80 UART_InitTypeDef UART_InitStructure;
\r
81 GPIO_InitTypeDef GPIO_InitStructure;
\r
82 EIC_IRQInitTypeDef EIC_IRQInitStructure;
\r
84 /* Create the queues used to hold Rx and Tx characters. */
\r
85 xRxedChars = xQueueCreate( uxQueueLength, ( unsigned portBASE_TYPE ) sizeof( signed char ) );
\r
86 xCharsForTx = xQueueCreate( uxQueueLength + 1, ( unsigned portBASE_TYPE ) sizeof( signed char ) );
\r
88 /* If the queues were created correctly then setup the serial port
\r
90 if( ( xRxedChars != serINVALID_QUEUE ) && ( xCharsForTx != serINVALID_QUEUE ) )
\r
93 vConfigureQueues( xRxedChars, xCharsForTx, &xQueueEmpty );
\r
95 portENTER_CRITICAL();
\r
97 /* Enable the UART0 Clock. */
\r
98 MRCC_PeripheralClockConfig( MRCC_Peripheral_UART0, ENABLE );
\r
100 /* Configure the UART0_Tx as alternate function */
\r
101 GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
\r
102 GPIO_InitStructure.GPIO_Pin = GPIO_Pin_11;
\r
103 GPIO_Init(GPIO0, &GPIO_InitStructure);
\r
105 /* Configure the UART0_Rx as input floating */
\r
106 GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
\r
107 GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10;
\r
108 GPIO_Init(GPIO0, &GPIO_InitStructure);
\r
110 /* Configure UART0. */
\r
111 UART_InitStructure.UART_WordLength = UART_WordLength_8D;
\r
112 UART_InitStructure.UART_StopBits = UART_StopBits_1;
\r
113 UART_InitStructure.UART_Parity = UART_Parity_No;
\r
114 UART_InitStructure.UART_BaudRate = ulWantedBaud;
\r
115 UART_InitStructure.UART_HardwareFlowControl = UART_HardwareFlowControl_None;
\r
116 UART_InitStructure.UART_Mode = UART_Mode_Tx_Rx;
\r
117 UART_InitStructure.UART_TxFIFOLevel = UART_FIFOLevel_1_2; /* FIFO size 16 bytes, FIFO level 8 bytes */
\r
118 UART_InitStructure.UART_RxFIFOLevel = UART_FIFOLevel_1_2; /* FIFO size 16 bytes, FIFO level 8 bytes */
\r
119 UART_Init(UART0, &UART_InitStructure);
\r
121 /* Enable the UART0 */
\r
122 UART_Cmd(UART0, ENABLE);
\r
124 /* Configure the IEC for the UART interrupts. */
\r
125 EIC_IRQInitStructure.EIC_IRQChannelCmd = ENABLE;
\r
126 EIC_IRQInitStructure.EIC_IRQChannel = UART0_IRQChannel;
\r
127 EIC_IRQInitStructure.EIC_IRQChannelPriority = 1;
\r
128 EIC_IRQInit(&EIC_IRQInitStructure);
\r
130 xQueueEmpty = pdTRUE;
\r
131 UART_ITConfig( UART0, UART_IT_Transmit | UART_IT_Receive, ENABLE );
\r
133 portEXIT_CRITICAL();
\r
137 xReturn = ( xComPortHandle ) 0;
\r
140 /* This demo file only supports a single port but we have to return
\r
141 something to comply with the standard demo header file. */
\r
144 /*-----------------------------------------------------------*/
\r
146 signed portBASE_TYPE xSerialGetChar( xComPortHandle pxPort, signed char *pcRxedChar, TickType_t xBlockTime )
\r
148 /* The port handle is not required as this driver only supports one port. */
\r
151 /* Get the next character from the buffer. Return false if no characters
\r
152 are available, or arrive before xBlockTime expires. */
\r
153 if( xQueueReceive( xRxedChars, pcRxedChar, xBlockTime ) )
\r
162 /*-----------------------------------------------------------*/
\r
164 void vSerialPutString( xComPortHandle pxPort, const signed char * const pcString, unsigned short usStringLength )
\r
166 signed char *pxNext;
\r
168 /* A couple of parameters that this port does not use. */
\r
169 ( void ) usStringLength;
\r
172 /* NOTE: This implementation does not handle the queue being full as no
\r
173 block time is used! */
\r
175 /* The port handle is not required as this driver only supports UART0. */
\r
178 /* Send each character in the string, one at a time. */
\r
179 pxNext = ( signed char * ) pcString;
\r
182 xSerialPutChar( pxPort, *pxNext, serNO_BLOCK );
\r
186 /*-----------------------------------------------------------*/
\r
188 signed portBASE_TYPE xSerialPutChar( xComPortHandle pxPort, signed char cOutChar, TickType_t xBlockTime )
\r
190 portBASE_TYPE xReturn;
\r
192 /* Place the character in the queue of characters to be transmitted. */
\r
193 portENTER_CRITICAL();
\r
195 if( xQueueEmpty == pdTRUE )
\r
197 UART0->DR = cOutChar;
\r
202 if( xQueueSend( xCharsForTx, &cOutChar, xBlockTime ) != pdPASS )
\r
212 xQueueEmpty = pdFALSE;
\r
214 portEXIT_CRITICAL();
\r
218 /*-----------------------------------------------------------*/
\r
220 void vSerialClose( xComPortHandle xPort )
\r
222 /* Not supported as not required by the demo application. */
\r
224 /*-----------------------------------------------------------*/
\r