2 * FreeRTOS Kernel V10.3.0
\r
3 * Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved.
\r
5 * Permission is hereby granted, free of charge, to any person obtaining a copy of
\r
6 * this software and associated documentation files (the "Software"), to deal in
\r
7 * the Software without restriction, including without limitation the rights to
\r
8 * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
\r
9 * the Software, and to permit persons to whom the Software is furnished to do so,
\r
10 * subject to the following conditions:
\r
12 * The above copyright notice and this permission notice shall be included in all
\r
13 * copies or substantial portions of the Software.
\r
15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
\r
16 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
\r
17 * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
\r
18 * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
\r
19 * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
\r
20 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
\r
22 * http://www.FreeRTOS.org
\r
23 * http://aws.amazon.com/freertos
\r
25 * 1 tab == 4 spaces!
\r
29 * main-blinky.c is included when the "Blinky" build configuration is used.
\r
30 * main-full.c is included when the "Full" build configuration is used.
\r
32 * main-full.c (this file) defines a comprehensive demo that creates many
\r
33 * tasks, queues, semaphores and timers. It also demonstrates how Cortex-M3
\r
34 * interrupts can interact with FreeRTOS tasks/timers, and implements a simple
\r
35 * and small interactive web server.
\r
37 * This project runs on the SmartFusion A2F-EVAL-KIT evaluation board, which
\r
38 * is populated with an A2F200M3F SmartFusion mixed signal FPGA. The A2F200M3F
\r
39 * incorporates a Cortex-M3 microcontroller.
\r
41 * The main() Function:
\r
42 * main() creates two demo specific software timers, one demo specific queue,
\r
43 * and three demo specific tasks. It then creates a whole host of 'standard
\r
44 * demo' tasks/queues/semaphores, before starting the scheduler. The demo
\r
45 * specific tasks and timers are described in the comments here. The standard
\r
46 * demo tasks are described on the FreeRTOS.org web site.
\r
48 * The standard demo tasks provide no specific functionality. They are
\r
49 * included to both test the FreeRTOS port, and provide examples of how the
\r
50 * various FreeRTOS API functions can be used.
\r
52 * The Demo Specific Queue Send Task:
\r
53 * The queue send task is implemented by the prvQueueSendTask() function in
\r
54 * this file. prvQueueSendTask() sits in a loop that causes it to repeatedly
\r
55 * block for 200 milliseconds, before sending the value 100 to the queue that
\r
56 * was created within main(). Once the value is sent, the task loops back
\r
57 * around to block for another 200 milliseconds.
\r
59 * The Demo Specific Queue Receive Task:
\r
60 * The queue receive task is implemented by the prvQueueReceiveTask() function
\r
61 * in this file. prvQueueReceiveTask() sits in a loop that causes it to
\r
62 * repeatedly attempt to read data from the queue that was created within
\r
63 * main(). When data is received, the task checks the value of the data, and
\r
64 * if the value equals the expected 100, toggles the green LED. The 'block
\r
65 * time' parameter passed to the queue receive function specifies that the task
\r
66 * should be held in the Blocked state indefinitely to wait for data to be
\r
67 * available on the queue. The queue receive task will only leave the Blocked
\r
68 * state when the queue send task writes to the queue. As the queue send task
\r
69 * writes to the queue every 200 milliseconds, the queue receive task leaves
\r
70 * the Blocked state every 200 milliseconds, and therefore toggles the LED
\r
71 * every 200 milliseconds.
\r
73 * The Demo Specific OLED Task:
\r
74 * The OLED task is a very simple task that just scrolls a message across the
\r
75 * OLED. Ideally this would be done in a timer, but the OLED driver accesses
\r
76 * the I2C which is time consuming.
\r
78 * The Demo Specific LED Software Timer and the Button Interrupt:
\r
79 * The user button SW1 is configured to generate an interrupt each time it is
\r
80 * pressed. The interrupt service routine switches an LED on, and resets the
\r
81 * LED software timer. The LED timer has a 5000 millisecond (5 second) period,
\r
82 * and uses a callback function that is defined to just turn the LED off again.
\r
83 * Therefore, pressing the user button will turn the LED on, and the LED will
\r
84 * remain on until a full five seconds pass without the button being pressed.
\r
86 * The Demo Specific "Check" Callback Function:
\r
87 * This is called each time the 'check' timer expires. The check timer
\r
88 * callback function inspects all the standard demo tasks to see if they are
\r
89 * all executing as expected. The check timer is initially configured to
\r
90 * expire every three seconds, but will shorted this to every 500ms if an error
\r
91 * is ever discovered. The check timer callback toggles the LED defined by
\r
92 * the mainCHECK_LED definition each time it executes. Therefore, if LED
\r
93 * mainCHECK_LED is toggling every three seconds, then no error have been found.
\r
94 * If LED mainCHECK_LED is toggling every 500ms, then at least one errors has
\r
95 * been found. The task in which the error was discovered is displayed at the
\r
96 * bottom of the "task stats" page that is served by the embedded web server.
\r
98 * The Demo Specific Idle Hook Function:
\r
99 * The idle hook function demonstrates how to query the amount of FreeRTOS heap
\r
100 * space that is remaining (see vApplicationIdleHook() defined in this file).
\r
102 * The Web Server Task:
\r
103 * The IP address used by the SmartFusion target is configured by the
\r
104 * definitions configIP_ADDR0 to configIP_ADDR3, which are located in the
\r
105 * FreeRTOSConfig.h header file. See the documentation page for this example
\r
106 * on the http://www.FreeRTOS.org web site for further connection information.
\r
109 /* Kernel includes. */
\r
110 #include "FreeRTOS.h"
\r
113 #include "timers.h"
\r
115 /* Microsemi drivers/libraries includes. */
\r
116 #include "mss_gpio.h"
\r
117 #include "mss_watchdog.h"
\r
118 #include "mss_timer.h"
\r
119 #include "mss_ace.h"
\r
122 /* Common demo includes. */
\r
123 #include "partest.h"
\r
125 #include "BlockQ.h"
\r
127 #include "blocktim.h"
\r
128 #include "semtest.h"
\r
129 #include "GenQTest.h"
\r
131 #include "recmutex.h"
\r
132 #include "TimerDemo.h"
\r
134 /* Priorities at which the tasks are created. */
\r
135 #define mainQUEUE_RECEIVE_TASK_PRIORITY ( tskIDLE_PRIORITY + 2 )
\r
136 #define mainQUEUE_SEND_TASK_PRIORITY ( tskIDLE_PRIORITY + 1 )
\r
138 /* The rate at which data is sent to the queue, specified in milliseconds, and
\r
139 converted to ticks using the portTICK_PERIOD_MS constant. */
\r
140 #define mainQUEUE_SEND_FREQUENCY_MS ( 200 / portTICK_PERIOD_MS )
\r
142 /* The number of items the queue can hold. This is 1 as the receive task
\r
143 will remove items as they are added, meaning the send task should always find
\r
144 the queue empty. */
\r
145 #define mainQUEUE_LENGTH ( 1 )
\r
147 /* The LED toggled by the check timer callback function. */
\r
148 #define mainCHECK_LED 0x07UL
\r
150 /* The LED turned on by the button interrupt, and turned off by the LED timer. */
\r
151 #define mainTIMER_CONTROLLED_LED 0x06UL
\r
153 /* The LED toggle by the queue receive task. */
\r
154 #define mainTASK_CONTROLLED_LED 0x05UL
\r
156 /* Constant used by the standard timer test functions. */
\r
157 #define mainTIMER_TEST_PERIOD ( 50 )
\r
159 /* Priorities used by the various different tasks. */
\r
160 #define mainCHECK_TASK_PRIORITY ( configMAX_PRIORITIES - 1 )
\r
161 #define mainQUEUE_POLL_PRIORITY ( tskIDLE_PRIORITY + 1 )
\r
162 #define mainSEM_TEST_PRIORITY ( tskIDLE_PRIORITY + 1 )
\r
163 #define mainBLOCK_Q_PRIORITY ( tskIDLE_PRIORITY + 2 )
\r
164 #define mainCREATOR_TASK_PRIORITY ( tskIDLE_PRIORITY + 3 )
\r
165 #define mainFLASH_TASK_PRIORITY ( tskIDLE_PRIORITY + 1 )
\r
166 #define mainuIP_TASK_PRIORITY ( tskIDLE_PRIORITY + 2 )
\r
167 #define mainOLED_TASK_PRIORITY ( tskIDLE_PRIORITY + 1 )
\r
168 #define mainINTEGER_TASK_PRIORITY ( tskIDLE_PRIORITY )
\r
169 #define mainGEN_QUEUE_TASK_PRIORITY ( tskIDLE_PRIORITY )
\r
171 /* The WEB server uses string handling functions, which in turn use a bit more
\r
172 stack than most of the other tasks. */
\r
173 #define mainuIP_STACK_SIZE ( configMINIMAL_STACK_SIZE * 3 )
\r
175 /* The period at which the check timer will expire, in ms, provided no errors
\r
176 have been reported by any of the standard demo tasks. */
\r
177 #define mainCHECK_TIMER_PERIOD_MS ( 3000UL / portTICK_PERIOD_MS )
\r
179 /* The period at which the OLED timer will expire. Each time it expires, it's
\r
180 callback function updates the OLED text. */
\r
181 #define mainOLED_PERIOD_MS ( 75UL / portTICK_PERIOD_MS )
\r
183 /* The period at which the check timer will expire, in ms, if an error has been
\r
184 reported in one of the standard demo tasks. */
\r
185 #define mainERROR_CHECK_TIMER_PERIOD_MS ( 500UL / portTICK_PERIOD_MS )
\r
187 /* The LED will remain on until the button has not been pushed for a full
\r
189 #define mainLED_TIMER_PERIOD_MS ( 5000UL / portTICK_PERIOD_MS )
\r
191 /* A zero block time. */
\r
192 #define mainDONT_BLOCK ( 0UL )
\r
193 /*-----------------------------------------------------------*/
\r
196 * Setup the NVIC, LED outputs, and button inputs.
\r
198 static void prvSetupHardware( void );
\r
201 * The tasks as described in the comments at the top of this file.
\r
203 static void prvQueueReceiveTask( void *pvParameters );
\r
204 static void prvQueueSendTask( void *pvParameters );
\r
207 * The LED timer callback function. This does nothing but switch the red LED
\r
210 static void prvLEDTimerCallback( TimerHandle_t xTimer );
\r
213 * The check timer callback function, as described at the top of this file.
\r
215 static void prvCheckTimerCallback( TimerHandle_t xTimer );
\r
218 * This is not a 'standard' partest function, so the prototype is not in
\r
219 * partest.h, and is instead included here.
\r
221 void vParTestSetLEDFromISR( unsigned portBASE_TYPE uxLED, signed portBASE_TYPE xValue );
\r
224 * Contains the implementation of the WEB server.
\r
226 extern void vuIP_Task( void *pvParameters );
\r
229 * A very simply task that does nothing but scroll the OLED display. Ideally
\r
230 * this would be done within a timer, but it accesses the I2C port which is
\r
233 static void prvOLEDTask( void * pvParameters);
\r
235 /*-----------------------------------------------------------*/
\r
237 /* The queue used by both application specific demo tasks defined in this file. */
\r
238 static QueueHandle_t xQueue = NULL;
\r
240 /* The LED software timer. This uses prvLEDTimerCallback() as it's callback
\r
242 static TimerHandle_t xLEDTimer = NULL;
\r
244 /* The check timer. This uses prvCheckTimerCallback() as it's callback
\r
246 static TimerHandle_t xCheckTimer = NULL;
\r
248 /* The status message that is displayed at the bottom of the "task stats" web
\r
249 page, which is served by the uIP task. This will report any errors picked up
\r
250 by the check timer callback. */
\r
251 static const char *pcStatusMessage = NULL;
\r
253 /*-----------------------------------------------------------*/
\r
257 /* Configure the NVIC, LED outputs and button inputs. */
\r
258 prvSetupHardware();
\r
260 /* Create the queue. */
\r
261 xQueue = xQueueCreate( mainQUEUE_LENGTH, sizeof( unsigned long ) );
\r
263 if( xQueue != NULL )
\r
265 /* Start the three application specific demo tasks, as described in the
\r
266 comments at the top of this file. */
\r
267 xTaskCreate( prvQueueReceiveTask, "Rx", configMINIMAL_STACK_SIZE, NULL, mainQUEUE_RECEIVE_TASK_PRIORITY, NULL );
\r
268 xTaskCreate( prvQueueSendTask, "TX", configMINIMAL_STACK_SIZE, NULL, mainQUEUE_SEND_TASK_PRIORITY, NULL );
\r
269 xTaskCreate( prvOLEDTask, "OLED", configMINIMAL_STACK_SIZE, NULL, mainOLED_TASK_PRIORITY, NULL );
\r
271 /* Create the software timer that is responsible for turning off the LED
\r
272 if the button is not pushed within 5000ms, as described at the top of
\r
274 xLEDTimer = xTimerCreate( "LEDTimer", /* A text name, purely to help debugging. */
\r
275 ( mainLED_TIMER_PERIOD_MS ), /* The timer period, in this case 5000ms (5s). */
\r
276 pdFALSE, /* This is a one-shot timer, so xAutoReload is set to pdFALSE. */
\r
277 ( void * ) 0, /* The ID is not used, so can be set to anything. */
\r
278 prvLEDTimerCallback /* The callback function that switches the LED off. */
\r
281 /* Create the software timer that performs the 'check' functionality,
\r
282 as described at the top of this file. */
\r
283 xCheckTimer = xTimerCreate( "CheckTimer", /* A text name, purely to help debugging. */
\r
284 ( mainCHECK_TIMER_PERIOD_MS ), /* The timer period, in this case 3000ms (3s). */
\r
285 pdTRUE, /* This is an auto-reload timer, so xAutoReload is set to pdTRUE. */
\r
286 ( void * ) 0, /* The ID is not used, so can be set to anything. */
\r
287 prvCheckTimerCallback /* The callback function that inspects the status of all the other tasks. */
\r
290 /* Create a lot of 'standard demo' tasks. */
\r
291 vStartBlockingQueueTasks( mainBLOCK_Q_PRIORITY );
\r
292 vCreateBlockTimeTasks();
\r
293 vStartSemaphoreTasks( mainSEM_TEST_PRIORITY );
\r
294 vStartGenericQueueTasks( mainGEN_QUEUE_TASK_PRIORITY );
\r
295 vStartLEDFlashTasks( mainFLASH_TASK_PRIORITY );
\r
296 vStartQueuePeekTasks();
\r
297 vStartRecursiveMutexTasks();
\r
298 vStartTimerDemoTask( mainTIMER_TEST_PERIOD );
\r
300 /* Create the web server task. */
\r
301 xTaskCreate( vuIP_Task, "uIP", mainuIP_STACK_SIZE, NULL, mainuIP_TASK_PRIORITY, NULL );
\r
303 /* The suicide tasks must be created last, as they need to know how many
\r
304 tasks were running prior to their creation in order to ascertain whether
\r
305 or not the correct/expected number of tasks are running at any given
\r
307 vCreateSuicidalTasks( mainCREATOR_TASK_PRIORITY );
\r
309 /* Start the tasks and timer running. */
\r
310 vTaskStartScheduler();
\r
313 /* If all is well, the scheduler will now be running, and the following line
\r
314 will never be reached. If the following line does execute, then there was
\r
315 insufficient FreeRTOS heap memory available for the idle and/or timer tasks
\r
316 to be created. See the memory management section on the FreeRTOS web site
\r
317 for more details. */
\r
320 /*-----------------------------------------------------------*/
\r
322 static void prvCheckTimerCallback( TimerHandle_t xTimer )
\r
324 /* Check the standard demo tasks are running without error. Latch the
\r
325 latest reported error in the pcStatusMessage character pointer. */
\r
326 if( xAreGenericQueueTasksStillRunning() != pdTRUE )
\r
328 pcStatusMessage = "Error: GenQueue";
\r
331 if( xAreQueuePeekTasksStillRunning() != pdTRUE )
\r
333 pcStatusMessage = "Error: QueuePeek\r\n";
\r
336 if( xAreBlockingQueuesStillRunning() != pdTRUE )
\r
338 pcStatusMessage = "Error: BlockQueue\r\n";
\r
341 if( xAreBlockTimeTestTasksStillRunning() != pdTRUE )
\r
343 pcStatusMessage = "Error: BlockTime\r\n";
\r
346 if( xAreSemaphoreTasksStillRunning() != pdTRUE )
\r
348 pcStatusMessage = "Error: SemTest\r\n";
\r
351 if( xIsCreateTaskStillRunning() != pdTRUE )
\r
353 pcStatusMessage = "Error: Death\r\n";
\r
356 if( xAreRecursiveMutexTasksStillRunning() != pdTRUE )
\r
358 pcStatusMessage = "Error: RecMutex\r\n";
\r
361 if( xAreTimerDemoTasksStillRunning( ( mainCHECK_TIMER_PERIOD_MS ) ) != pdTRUE )
\r
363 pcStatusMessage = "Error: TimerDemo";
\r
366 /* Toggle the check LED to give an indication of the system status. If
\r
367 the LED toggles every mainCHECK_TIMER_PERIOD_MS milliseconds then
\r
368 everything is ok. A faster toggle indicates an error. */
\r
369 vParTestToggleLED( mainCHECK_LED );
\r
371 /* Have any errors been latch in pcStatusMessage? If so, shorten the
\r
372 period of the check timer to mainERROR_CHECK_TIMER_PERIOD_MS milliseconds.
\r
373 This will result in an increase in the rate at which mainCHECK_LED
\r
375 if( pcStatusMessage != NULL )
\r
377 /* This call to xTimerChangePeriod() uses a zero block time. Functions
\r
378 called from inside of a timer callback function must *never* attempt
\r
380 xTimerChangePeriod( xCheckTimer, ( mainERROR_CHECK_TIMER_PERIOD_MS ), mainDONT_BLOCK );
\r
383 /*-----------------------------------------------------------*/
\r
385 static void prvLEDTimerCallback( TimerHandle_t xTimer )
\r
387 /* The timer has expired - so no button pushes have occurred in the last
\r
388 five seconds - turn the LED off. */
\r
389 vParTestSetLED( mainTIMER_CONTROLLED_LED, pdFALSE );
\r
391 /*-----------------------------------------------------------*/
\r
393 /* The ISR executed when the user button is pushed. */
\r
394 void GPIO8_IRQHandler( void )
\r
396 portBASE_TYPE xHigherPriorityTaskWoken = pdFALSE;
\r
398 /* The button was pushed, so ensure the LED is on before resetting the
\r
399 LED timer. The LED timer will turn the LED off if the button is not
\r
400 pushed within 5000ms. */
\r
401 vParTestSetLEDFromISR( mainTIMER_CONTROLLED_LED, pdTRUE );
\r
403 /* This interrupt safe FreeRTOS function can be called from this interrupt
\r
404 because the interrupt priority is below the
\r
405 configMAX_SYSCALL_INTERRUPT_PRIORITY setting in FreeRTOSConfig.h. */
\r
406 xTimerResetFromISR( xLEDTimer, &xHigherPriorityTaskWoken );
\r
408 /* Clear the interrupt before leaving. */
\r
409 MSS_GPIO_clear_irq( MSS_GPIO_8 );
\r
411 /* If calling xTimerResetFromISR() caused a task (in this case the timer
\r
412 service/daemon task) to unblock, and the unblocked task has a priority
\r
413 higher than or equal to the task that was interrupted, then
\r
414 xHigherPriorityTaskWoken will now be set to pdTRUE, and calling
\r
415 portEND_SWITCHING_ISR() will ensure the unblocked task runs next. */
\r
416 portEND_SWITCHING_ISR( xHigherPriorityTaskWoken );
\r
418 /*-----------------------------------------------------------*/
\r
420 static void prvQueueSendTask( void *pvParameters )
\r
422 TickType_t xNextWakeTime;
\r
423 const unsigned long ulValueToSend = 100UL;
\r
425 /* The timer command queue will have been filled when the timer test tasks
\r
426 were created in main() (this is part of the test they perform). Therefore,
\r
427 while the check timer can be created in main(), it cannot be started from
\r
428 main(). Once the scheduler has started, the timer service task will drain
\r
429 the command queue, and now the check timer can be started successfully. */
\r
430 xTimerStart( xCheckTimer, portMAX_DELAY );
\r
432 /* Initialise xNextWakeTime - this only needs to be done once. */
\r
433 xNextWakeTime = xTaskGetTickCount();
\r
437 /* Place this task in the blocked state until it is time to run again.
\r
438 The block time is specified in ticks, the constant used converts ticks
\r
439 to ms. While in the Blocked state this task will not consume any CPU
\r
441 vTaskDelayUntil( &xNextWakeTime, mainQUEUE_SEND_FREQUENCY_MS );
\r
443 /* Send to the queue - causing the queue receive task to unblock and
\r
444 toggle an LED. 0 is used as the block time so the sending operation
\r
445 will not block - it shouldn't need to block as the queue should always
\r
446 be empty at this point in the code. */
\r
447 xQueueSend( xQueue, &ulValueToSend, mainDONT_BLOCK );
\r
450 /*-----------------------------------------------------------*/
\r
452 static void prvQueueReceiveTask( void *pvParameters )
\r
454 unsigned long ulReceivedValue;
\r
458 /* Wait until something arrives in the queue - this task will block
\r
459 indefinitely provided INCLUDE_vTaskSuspend is set to 1 in
\r
460 FreeRTOSConfig.h. */
\r
461 xQueueReceive( xQueue, &ulReceivedValue, portMAX_DELAY );
\r
463 /* To get here something must have been received from the queue, but
\r
464 is it the expected value? If it is, toggle the LED. */
\r
465 if( ulReceivedValue == 100UL )
\r
467 vParTestToggleLED( mainTASK_CONTROLLED_LED );
\r
471 /*-----------------------------------------------------------*/
\r
473 static void prvOLEDTask( void * pvParameters)
\r
475 static struct oled_data xOLEDData;
\r
476 static unsigned char ucOffset1 = 0, ucOffset2 = 5;
\r
477 static TickType_t xLastScrollTime = 0UL;
\r
479 /* Initialise the display. */
\r
482 /* Initialise the parts of the oled_data structure that do not change. */
\r
483 xOLEDData.line1 = FIRST_LINE;
\r
484 xOLEDData.string1 = " www.FreeRTOS.org";
\r
485 xOLEDData.line2 = SECOND_LINE;
\r
486 xOLEDData.string2 = " www.FreeRTOS.org";
\r
487 xOLEDData.contrast_val = OLED_CONTRAST_VAL;
\r
488 xOLEDData.on_off = OLED_HORIZ_SCROLL_OFF;
\r
489 xOLEDData.column_scrool_per_step = OLED_HORIZ_SCROLL_STEP;
\r
490 xOLEDData.start_page = OLED_START_PAGE;
\r
491 xOLEDData.time_intrval_btw_scroll_step = OLED_HORIZ_SCROLL_TINVL;
\r
492 xOLEDData.end_page = OLED_END_PAGE;
\r
495 /* Initialise the last scroll time. This only needs to be done once,
\r
496 because from this point on it will get automatically updated in the
\r
497 xTaskDelayUntil() API function. */
\r
498 xLastScrollTime = xTaskGetTickCount();
\r
502 /* Wait until it is time to update the OLED again. */
\r
503 vTaskDelayUntil( &xLastScrollTime, mainOLED_PERIOD_MS );
\r
505 xOLEDData.char_offset1 = ucOffset1++;
\r
506 xOLEDData.char_offset2 = ucOffset2++;
\r
508 OLED_write_data( &xOLEDData, BOTH_LINES );
\r
511 /*-----------------------------------------------------------*/
\r
513 static void prvSetupHardware( void )
\r
515 SystemCoreClockUpdate();
\r
517 /* Disable the Watch Dog Timer */
\r
520 /* Configure the GPIO for the LEDs. */
\r
521 vParTestInitialise();
\r
523 /* ACE Initialization */
\r
526 /* Setup the GPIO and the NVIC for the switch used in this simple demo. */
\r
527 NVIC_SetPriority( GPIO8_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY );
\r
528 NVIC_EnableIRQ( GPIO8_IRQn );
\r
529 MSS_GPIO_config( MSS_GPIO_8, MSS_GPIO_INPUT_MODE | MSS_GPIO_IRQ_EDGE_NEGATIVE );
\r
530 MSS_GPIO_enable_irq( MSS_GPIO_8 );
\r
532 /*-----------------------------------------------------------*/
\r
534 void vApplicationMallocFailedHook( void )
\r
536 /* Called if a call to pvPortMalloc() fails because there is insufficient
\r
537 free memory available in the FreeRTOS heap. pvPortMalloc() is called
\r
538 internally by FreeRTOS API functions that create tasks, queues, software
\r
539 timers, and semaphores. The size of the FreeRTOS heap is set by the
\r
540 configTOTAL_HEAP_SIZE configuration constant in FreeRTOSConfig.h. */
\r
543 /*-----------------------------------------------------------*/
\r
545 void vApplicationStackOverflowHook( TaskHandle_t pxTask, char *pcTaskName )
\r
547 ( void ) pcTaskName;
\r
550 /* Run time stack overflow checking is performed if
\r
551 configconfigCHECK_FOR_STACK_OVERFLOW is defined to 1 or 2. This hook
\r
552 function is called if a stack overflow is detected. */
\r
553 taskDISABLE_INTERRUPTS();
\r
556 /*-----------------------------------------------------------*/
\r
558 void vApplicationIdleHook( void )
\r
560 volatile size_t xFreeStackSpace;
\r
562 /* This function is called on each cycle of the idle task. In this case it
\r
563 does nothing useful, other than report the amount of FreeRTOS heap that
\r
564 remains unallocated. */
\r
565 xFreeStackSpace = xPortGetFreeHeapSize();
\r
567 if( xFreeStackSpace > 100 )
\r
569 /* By now, the kernel has allocated everything it is going to, so
\r
570 if there is a lot of heap remaining unallocated then
\r
571 the value of configTOTAL_HEAP_SIZE in FreeRTOSConfig.h can be
\r
572 reduced accordingly. */
\r
575 /*-----------------------------------------------------------*/
\r
577 char *pcGetTaskStatusMessage( void )
\r
579 /* Not bothered about a critical section here although technically because
\r
580 of the task priorities the pointer could change it will be atomic if not
\r
581 near atomic and its not critical. */
\r
582 if( pcStatusMessage == NULL )
\r
584 return "All tasks running without error";
\r
588 return ( char * ) pcStatusMessage;
\r
591 /*-----------------------------------------------------------*/
\r
593 void vMainConfigureTimerForRunTimeStats( void )
\r
595 const unsigned long ulMax32BitValue = 0xffffffffUL;
\r
597 MSS_TIM64_init( MSS_TIMER_PERIODIC_MODE );
\r
598 MSS_TIM64_load_immediate( ulMax32BitValue, ulMax32BitValue );
\r
601 /*-----------------------------------------------------------*/
\r
603 unsigned long ulGetRunTimeCounterValue( void )
\r
605 unsigned long long ullCurrentValue;
\r
606 const unsigned long long ulMax64BitValue = 0xffffffffffffffffULL;
\r
607 unsigned long *pulHighWord, *pulLowWord;
\r
609 pulHighWord = ( unsigned long * ) &ullCurrentValue;
\r
610 pulLowWord = pulHighWord++;
\r
612 MSS_TIM64_get_current_value( ( uint32_t * ) pulHighWord, ( uint32_t * ) pulLowWord );
\r
614 /* Convert the down count into an upcount. */
\r
615 ullCurrentValue = ulMax64BitValue - ullCurrentValue;
\r
617 /* Scale to a 32bit number of suitable frequency. */
\r
618 ullCurrentValue >>= 13;
\r
620 /* Just return 32 bits. */
\r
621 return ( unsigned long ) ullCurrentValue;
\r