2 *****************************************************************************
4 ** File : xmc4500_flash.ld
6 ** Abstract : Linker script for XMC4500-E144x1024 Device with
7 ** 1024KByte FLASH, 64KByte RAM
9 ** Set heap size, stack size and stack location according
10 ** to application requirements.
12 ** Set memory bank area and size if external memory is used.
14 ** Target : Infineon XMC4500
16 ** Environment : Atollic TrueSTUDIO(R)
18 ** Distribution: The file is distributed
\93as is,
\94 without any warranty
21 ** (c)Copyright Atollic AB.
22 ** This file may be distributed and used with the FreeRTOS example project
23 ** for Atollic TrueSTUDIO only.
25 *****************************************************************************
31 /* Highest address of the user mode stack */
32 _estack = 0x10010000; /* end of 64K RAM */
34 /* Generate a link error if heap and stack don't fit into RAM */
35 _Min_Heap_Size = 0; /* required amount of heap */
36 _Min_Stack_Size = 0x200; /* required amount of stack */
38 /* Specify the memory areas */
41 FLASH1_cached (rx) : ORIGIN = 0x08000000, LENGTH = 1024K
42 FLASH1_uncached (rx) : ORIGIN = 0x0C000000, LENGTH = 1024K
43 PSRAM1 (xrw) : ORIGIN = 0x10000000, LENGTH = 64K
44 DSRAM1_system (xrw) : ORIGIN = 0x20000000, LENGTH = 64K
45 DSRAM2_comm (xrw) : ORIGIN = 0x30000000, LENGTH = 32K
46 MEMORY_B1 (rx) : ORIGIN = 0x60000000, LENGTH = 0K
49 /* Define output sections */
52 /* The startup code goes first into FLASH */
56 _isr_vector = .; /* define isr_vector start address */
57 KEEP(*(.isr_vector)) /* Startup code */
61 /* The program code and other data goes into FLASH */
65 *(.text) /* .text sections (code) */
66 *(.text*) /* .text* sections (code) */
67 *(.rodata) /* .rodata sections (constants, strings, etc.) */
68 *(.rodata*) /* .rodata* sections (constants, strings, etc.) */
69 *(.glue_7) /* glue arm to thumb code */
70 *(.glue_7t) /* glue thumb to arm code */
77 _etext = .; /* define a global symbols at end of code */
81 .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH1_uncached
90 PROVIDE_HIDDEN (__preinit_array_start = .);
91 KEEP (*(.preinit_array*))
92 PROVIDE_HIDDEN (__preinit_array_end = .);
96 PROVIDE_HIDDEN (__init_array_start = .);
97 KEEP (*(SORT(.init_array.*)))
98 KEEP (*(.init_array*))
99 PROVIDE_HIDDEN (__init_array_end = .);
103 PROVIDE_HIDDEN (__fini_array_start = .);
104 KEEP (*(SORT(.fini_array.*)))
105 KEEP (*(.fini_array*))
106 PROVIDE_HIDDEN (__fini_array_end = .);
109 /* used by the startup to initialize data */
110 _sidata = LOADADDR(.data);
112 /* Initialized data sections goes into RAM, load LMA copy after code */
116 _sdata = .; /* create a global symbol at data start */
117 *(.data) /* .data sections */
118 *(.data*) /* .data* sections */
121 _edata = .; /* define a global symbol at data end */
122 } >DSRAM1_system AT> FLASH1_uncached
124 /* Uninitialized data section */
128 /* This is used by the startup in order to initialize the .bss secion */
129 _sbss = .; /* define a global symbol at bss start */
130 __bss_start__ = _sbss;
136 _ebss = .; /* define a global symbol at bss end */
140 /* User_heap_stack section, used to check that there is enough RAM left */
145 PROVIDE ( _end = . );
146 . = . + _Min_Heap_Size;
147 . = . + _Min_Stack_Size;
151 /* MEMORY_bank1 section, code must be located here explicitly */
152 /* Example: extern int foo(void) __attribute__ ((section (".mb1text"))); */
155 *(.mb1text) /* .mb1text sections (code) */
156 *(.mb1text*) /* .mb1text* sections (code) */
157 *(.mb1rodata) /* read-only data (constants) */
161 /* Remove information from the standard libraries */
169 .ARM.attributes 0 : { *(.ARM.attributes) }