2 FreeRTOS V8.0.0:rc1 - Copyright (C) 2014 Real Time Engineers Ltd.
\r
5 VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
\r
7 ***************************************************************************
\r
9 * FreeRTOS provides completely free yet professionally developed, *
\r
10 * robust, strictly quality controlled, supported, and cross *
\r
11 * platform software that has become a de facto standard. *
\r
13 * Help yourself get started quickly and support the FreeRTOS *
\r
14 * project by purchasing a FreeRTOS tutorial book, reference *
\r
15 * manual, or both from: http://www.FreeRTOS.org/Documentation *
\r
19 ***************************************************************************
\r
21 This file is part of the FreeRTOS distribution.
\r
23 FreeRTOS is free software; you can redistribute it and/or modify it under
\r
24 the terms of the GNU General Public License (version 2) as published by the
\r
25 Free Software Foundation >>!AND MODIFIED BY!<< the FreeRTOS exception.
\r
27 >>! NOTE: The modification to the GPL is included to allow you to distribute
\r
28 >>! a combined work that includes FreeRTOS without being obliged to provide
\r
29 >>! the source code for proprietary components outside of the FreeRTOS
\r
32 FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
\r
33 WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
\r
34 FOR A PARTICULAR PURPOSE. Full license text is available from the following
\r
35 link: http://www.freertos.org/a00114.html
\r
39 ***************************************************************************
\r
41 * Having a problem? Start by reading the FAQ "My application does *
\r
42 * not run, what could be wrong?" *
\r
44 * http://www.FreeRTOS.org/FAQHelp.html *
\r
46 ***************************************************************************
\r
48 http://www.FreeRTOS.org - Documentation, books, training, latest versions,
\r
49 license and Real Time Engineers Ltd. contact details.
\r
51 http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
\r
52 including FreeRTOS+Trace - an indispensable productivity tool, a DOS
\r
53 compatible FAT file system, and our tiny thread aware UDP/IP stack.
\r
55 http://www.OpenRTOS.com - Real Time Engineers ltd license FreeRTOS to High
\r
56 Integrity Systems to sell under the OpenRTOS brand. Low cost OpenRTOS
\r
57 licenses offer ticketed support, indemnification and middleware.
\r
59 http://www.SafeRTOS.com - High Integrity Systems also provide a safety
\r
60 engineered and independently SIL3 certified version for use in safety and
\r
61 mission critical applications that require provable dependability.
\r
68 * This file demonstrates the use of FreeRTOS-MPU. It creates tasks in both
\r
69 * User mode and Privileged mode, and using both the original xTaskCreate() and
\r
70 * the new xTaskCreateRestricted() API functions. The purpose of each created
\r
71 * task is documented in the comments above the task function prototype (in
\r
72 * this file), with the task behaviour demonstrated and documented within the
\r
73 * task function itself. In addition a queue is used to demonstrate passing
\r
74 * data between protected/restricted tasks as well as passing data between an
\r
75 * interrupt and a protected/restricted task.
\r
80 /* Standard includes. */
\r
82 #include <__cross_studio_io.h>
\r
84 /* Scheduler includes. */
\r
85 #include "FreeRTOS.h"
\r
90 /* Hardware library includes. */
\r
91 #include "hw_types.h"
\r
92 #include "hw_sysctl.h"
\r
95 /*-----------------------------------------------------------*/
\r
97 /* Misc constants. */
\r
98 #define mainDONT_BLOCK ( 0 )
\r
100 /* Definitions for the messages that can be sent to the check task. */
\r
101 #define mainREG_TEST_1_STILL_EXECUTING ( 0 )
\r
102 #define mainREG_TEST_2_STILL_EXECUTING ( 1 )
\r
103 #define mainPRINT_SYSTEM_STATUS ( 2 )
\r
105 /* GCC specifics. */
\r
106 #define mainALIGN_TO( x ) __attribute__((aligned(x)))
\r
109 /*-----------------------------------------------------------*/
\r
110 /* Prototypes for functions that implement tasks. -----------*/
\r
111 /*-----------------------------------------------------------*/
\r
114 * Prototype for the reg test tasks. Amongst other things, these fill the CPU
\r
115 * registers with known values before checking that the registers still contain
\r
116 * the expected values. Each of the two tasks use different values so an error
\r
117 * in the context switch mechanism can be caught. Both reg test tasks execute
\r
118 * at the idle priority so will get preempted regularly. Each task repeatedly
\r
119 * sends a message on a queue so long as it remains functioning correctly. If
\r
120 * an error is detected within the task the task is simply deleted.
\r
122 static void prvRegTest1Task( void *pvParameters );
\r
123 static void prvRegTest2Task( void *pvParameters );
\r
126 * Prototype for the check task. The check task demonstrates various features
\r
127 * of the MPU before entering a loop where it waits for messages to arrive on a
\r
130 * Two types of messages can be processes:
\r
132 * 1) "I'm Alive" messages sent from the reg test tasks, indicating that the
\r
133 * task is still operational.
\r
135 * 2) "Print Status commands" sent periodically by the tick hook function (and
\r
136 * therefore from within an interrupt) which command the check task to write
\r
137 * either pass or fail to the terminal, depending on the status of the reg
\r
140 static void prvCheckTask( void *pvParameters );
\r
143 * Prototype for a task created in User mode using the original vTaskCreate()
\r
144 * API function. The task demonstrates the characteristics of such a task,
\r
145 * before simply deleting itself.
\r
147 static void prvOldStyleUserModeTask( void *pvParameters );
\r
150 * Prototype for a task created in Privileged mode using the original
\r
151 * vTaskCreate() API function. The task demonstrates the characteristics of
\r
152 * such a task, before simply deleting itself.
\r
154 static void prvOldStylePrivilegedModeTask( void *pvParameters );
\r
157 /*-----------------------------------------------------------*/
\r
158 /* Prototypes for other misc functions. --------------------*/
\r
159 /*-----------------------------------------------------------*/
\r
162 * Just configures any clocks and IO necessary.
\r
164 static void prvSetupHardware( void );
\r
167 * Simply deletes the calling task. The function is provided only because it
\r
168 * is simpler to call from asm code than the normal vTaskDelete() API function.
\r
169 * It has the noinline attribute because it is called from asm code.
\r
171 static void prvDeleteMe( void ) __attribute__((noinline));
\r
174 * Used by both reg test tasks to send messages to the check task. The message
\r
175 * just lets the check task know that the task is still functioning correctly.
\r
176 * If a reg test task detects an error it will delete itself, and in so doing
\r
177 * prevent itself from sending any more 'I'm Alive' messages to the check task.
\r
179 static void prvSendImAlive( xQueueHandle xHandle, unsigned long ulTaskNumber );
\r
182 * The check task is created with access to three memory regions (plus its
\r
183 * stack). Each memory region is configured with different parameters and
\r
184 * prvTestMemoryRegions() demonstrates what can and cannot be accessed for each
\r
185 * region. prvTestMemoryRegions() also demonstrates a task that was created
\r
186 * as a privileged task settings its own privilege level down to that of a user
\r
189 static void prvTestMemoryRegions( void );
\r
191 /*-----------------------------------------------------------*/
\r
193 /* The handle of the queue used to communicate between tasks and between tasks
\r
194 and interrupts. Note that this is a file scope variable that falls outside of
\r
195 any MPU region. As such other techniques have to be used to allow the tasks
\r
196 to gain access to the queue. See the comments in the tasks themselves for
\r
197 further information. */
\r
198 static xQueueHandle xFileScopeCheckQueue = NULL;
\r
201 /*-----------------------------------------------------------*/
\r
202 /* Data used by the 'check' task. ---------------------------*/
\r
203 /*-----------------------------------------------------------*/
\r
205 /* Define the constants used to allocate the check task stack. Note that the
\r
206 stack size is defined in words, not bytes. */
\r
207 #define mainCHECK_TASK_STACK_SIZE_WORDS 128
\r
208 #define mainCHECK_TASK_STACK_ALIGNMENT ( mainCHECK_TASK_STACK_SIZE_WORDS * sizeof( portSTACK_TYPE ) )
\r
210 /* Declare the stack that will be used by the check task. The kernel will
\r
211 automatically create an MPU region for the stack. The stack alignment must
\r
212 match its size, so if 128 words are reserved for the stack then it must be
\r
213 aligned to ( 128 * 4 ) bytes. */
\r
214 static portSTACK_TYPE xCheckTaskStack[ mainCHECK_TASK_STACK_SIZE_WORDS ] mainALIGN_TO( mainCHECK_TASK_STACK_ALIGNMENT );
\r
216 /* Declare three arrays - an MPU region will be created for each array
\r
217 using the xTaskParameters structure below. THIS IS JUST TO DEMONSTRATE THE
\r
218 MPU FUNCTIONALITY, the data is not used by the check tasks primary function
\r
219 of monitoring the reg test tasks and printing out status information.
\r
221 Note that the arrays allocate slightly more RAM than is actually assigned to
\r
222 the MPU region. This is to permit writes off the end of the array to be
\r
223 detected even when the arrays are placed in adjacent memory locations (with no
\r
224 gaps between them). The align size must be a power of two. */
\r
225 #define mainREAD_WRITE_ARRAY_SIZE 130
\r
226 #define mainREAD_WRITE_ALIGN_SIZE 128
\r
227 char cReadWriteArray[ mainREAD_WRITE_ARRAY_SIZE ] mainALIGN_TO( mainREAD_WRITE_ALIGN_SIZE );
\r
229 #define mainREAD_ONLY_ARRAY_SIZE 260
\r
230 #define mainREAD_ONLY_ALIGN_SIZE 256
\r
231 char cReadOnlyArray[ mainREAD_ONLY_ARRAY_SIZE ] mainALIGN_TO( mainREAD_ONLY_ALIGN_SIZE );
\r
233 #define mainPRIVILEGED_ONLY_ACCESS_ARRAY_SIZE 130
\r
234 #define mainPRIVILEGED_ONLY_ACCESS_ALIGN_SIZE 128
\r
235 char cPrivilegedOnlyAccessArray[ mainPRIVILEGED_ONLY_ACCESS_ALIGN_SIZE ] mainALIGN_TO( mainPRIVILEGED_ONLY_ACCESS_ALIGN_SIZE );
\r
237 /* Fill in a xTaskParameters structure to define the check task - this is the
\r
238 structure passed to the xTaskCreateRestricted() function. */
\r
239 static const xTaskParameters xCheckTaskParameters =
\r
241 prvCheckTask, /* pvTaskCode - the function that implements the task. */
\r
242 "Check", /* pcName */
\r
243 mainCHECK_TASK_STACK_SIZE_WORDS, /* usStackDepth - defined in words, not bytes. */
\r
244 ( void * ) 0x12121212, /* pvParameters - this value is just to test that the parameter is being passed into the task correctly. */
\r
245 ( tskIDLE_PRIORITY + 1 ) | portPRIVILEGE_BIT,/* uxPriority - this is the highest priority task in the system. The task is created in privileged mode to demonstrate accessing the privileged only data. */
\r
246 xCheckTaskStack, /* puxStackBuffer - the array to use as the task stack, as declared above. */
\r
248 /* xRegions - In this case the xRegions array is used to create MPU regions
\r
249 for all three of the arrays declared directly above. Each MPU region is
\r
250 created with different parameters. Again, THIS IS JUST TO DEMONSTRATE THE
\r
251 MPU FUNCTIONALITY, the data is not used by the check tasks primary function
\r
252 of monitoring the reg test tasks and printing out status information.*/
\r
254 /* Base address Length Parameters */
\r
255 { cReadWriteArray, mainREAD_WRITE_ALIGN_SIZE, portMPU_REGION_READ_WRITE },
\r
256 { cReadOnlyArray, mainREAD_ONLY_ALIGN_SIZE, portMPU_REGION_READ_ONLY },
\r
257 { cPrivilegedOnlyAccessArray, mainPRIVILEGED_ONLY_ACCESS_ALIGN_SIZE, portMPU_REGION_PRIVILEGED_READ_WRITE }
\r
263 /*-----------------------------------------------------------*/
\r
264 /* Data used by the 'reg test' tasks. -----------------------*/
\r
265 /*-----------------------------------------------------------*/
\r
267 /* Define the constants used to allocate the reg test task stacks. Note that
\r
268 that stack size is defined in words, not bytes. */
\r
269 #define mainREG_TEST_STACK_SIZE_WORDS 128
\r
270 #define mainREG_TEST_STACK_ALIGNMENT ( mainREG_TEST_STACK_SIZE_WORDS * sizeof( portSTACK_TYPE ) )
\r
272 /* Declare the stacks that will be used by the reg test tasks. The kernel will
\r
273 automatically create an MPU region for the stack. The stack alignment must
\r
274 match its size, so if 128 words are reserved for the stack then it must be
\r
275 aligned to ( 128 * 4 ) bytes. */
\r
276 static portSTACK_TYPE xRegTest1Stack[ mainREG_TEST_STACK_SIZE_WORDS ] mainALIGN_TO( mainREG_TEST_STACK_ALIGNMENT );
\r
277 static portSTACK_TYPE xRegTest2Stack[ mainREG_TEST_STACK_SIZE_WORDS ] mainALIGN_TO( mainREG_TEST_STACK_ALIGNMENT );
\r
279 /* Fill in a xTaskParameters structure per reg test task to define the tasks. */
\r
280 static const xTaskParameters xRegTest1Parameters =
\r
282 prvRegTest1Task, /* pvTaskCode - the function that implements the task. */
\r
283 "RegTest1", /* pcName */
\r
284 mainREG_TEST_STACK_SIZE_WORDS, /* usStackDepth */
\r
285 ( void * ) 0x12345678, /* pvParameters - this value is just to test that the parameter is being passed into the task correctly. */
\r
286 tskIDLE_PRIORITY | portPRIVILEGE_BIT, /* uxPriority - note that this task is created with privileges to demonstrate one method of passing a queue handle into the task. */
\r
287 xRegTest1Stack, /* puxStackBuffer - the array to use as the task stack, as declared above. */
\r
288 { /* xRegions - this task does not use any non-stack data hence all members are zero. */
\r
289 /* Base address Length Parameters */
\r
290 { 0x00, 0x00, 0x00 },
\r
291 { 0x00, 0x00, 0x00 },
\r
292 { 0x00, 0x00, 0x00 }
\r
295 /*-----------------------------------------------------------*/
\r
297 static xTaskParameters xRegTest2Parameters =
\r
299 prvRegTest2Task, /* pvTaskCode - the function that implements the task. */
\r
300 "RegTest2", /* pcName */
\r
301 mainREG_TEST_STACK_SIZE_WORDS, /* usStackDepth */
\r
302 ( void * ) NULL, /* pvParameters - this task uses the parameter to pass in a queue handle, but the queue is not created yet. */
\r
303 tskIDLE_PRIORITY, /* uxPriority */
\r
304 xRegTest2Stack, /* puxStackBuffer - the array to use as the task stack, as declared above. */
\r
305 { /* xRegions - this task does not use any non-stack data hence all members are zero. */
\r
306 /* Base address Length Parameters */
\r
307 { 0x00, 0x00, 0x00 },
\r
308 { 0x00, 0x00, 0x00 },
\r
309 { 0x00, 0x00, 0x00 }
\r
313 /*-----------------------------------------------------------*/
\r
317 prvSetupHardware();
\r
319 /* Create the queue used to pass "I'm alive" messages to the check task. */
\r
320 xFileScopeCheckQueue = xQueueCreate( 1, sizeof( unsigned long ) );
\r
322 /* One check task uses the task parameter to receive the queue handle.
\r
323 This allows the file scope variable to be accessed from within the task.
\r
324 The pvParameters member of xRegTest2Parameters can only be set after the
\r
325 queue has been created so is set here. */
\r
326 xRegTest2Parameters.pvParameters = xFileScopeCheckQueue;
\r
328 /* Create the three test tasks. Handles to the created tasks are not
\r
329 required, hence the second parameter is NULL. */
\r
330 xTaskCreateRestricted( &xRegTest1Parameters, NULL );
\r
331 xTaskCreateRestricted( &xRegTest2Parameters, NULL );
\r
332 xTaskCreateRestricted( &xCheckTaskParameters, NULL );
\r
334 /* Create the tasks that are created using the original xTaskCreate() API
\r
336 xTaskCreate( prvOldStyleUserModeTask, /* The function that implements the task. */
\r
337 "Task1", /* Text name for the task. */
\r
338 100, /* Stack depth in words. */
\r
339 NULL, /* Task parameters. */
\r
340 3, /* Priority and mode (user in this case). */
\r
344 xTaskCreate( prvOldStylePrivilegedModeTask, /* The function that implements the task. */
\r
345 "Task2", /* Text name for the task. */
\r
346 100, /* Stack depth in words. */
\r
347 NULL, /* Task parameters. */
\r
348 ( 3 | portPRIVILEGE_BIT ), /* Priority and mode. */
\r
352 /* Start the scheduler. */
\r
353 vTaskStartScheduler();
\r
355 /* Will only get here if there was insufficient memory to create the idle
\r
360 /*-----------------------------------------------------------*/
\r
362 static void prvCheckTask( void *pvParameters )
\r
364 /* This task is created in privileged mode so can access the file scope
\r
365 queue variable. Take a stack copy of this before the task is set into user
\r
366 mode. Once that task is in user mode the file scope queue variable will no
\r
367 longer be accessible but the stack copy will. */
\r
368 xQueueHandle xQueue = xFileScopeCheckQueue;
\r
370 unsigned long ulStillAliveCounts[ 2 ] = { 0 };
\r
371 const char *pcStatusMessage = "PASS\r\n";
\r
373 /* The debug_printf() function uses RAM that is outside of the control of the
\r
374 application writer. Therefore the application_defined_privileged_functions.h
\r
375 header file is used to provide a version that executes with privileges. */
\r
376 extern int MPU_debug_printf( const char *pcMessage );
\r
378 /* Just to remove compiler warning. */
\r
379 ( void ) pvParameters;
\r
381 /* Demonstrate how the various memory regions can and can't be accessed.
\r
382 The task privilege level is set down to user mode within this function. */
\r
383 prvTestMemoryRegions();
\r
385 /* Tests are done so lower the privilege status. */
\r
386 portSWITCH_TO_USER_MODE();
\r
388 /* This loop performs the main function of the task, which is blocking
\r
389 on a message queue then processing each message as it arrives. */
\r
392 /* Wait for the next message to arrive. */
\r
393 xQueueReceive( xQueue, &lMessage, portMAX_DELAY );
\r
397 case mainREG_TEST_1_STILL_EXECUTING :
\r
398 /* Message from task 1, so task 1 must still be executing. */
\r
399 ( ulStillAliveCounts[ 0 ] )++;
\r
402 case mainREG_TEST_2_STILL_EXECUTING :
\r
403 /* Message from task 2, so task 2 must still be executing. */
\r
404 ( ulStillAliveCounts[ 1 ] )++;
\r
407 case mainPRINT_SYSTEM_STATUS :
\r
408 /* Message from tick hook, time to print out the system
\r
409 status. If messages has stopped arriving from either reg
\r
410 test task then the status must be set to fail. */
\r
411 if( ( ulStillAliveCounts[ 0 ] == 0 ) || ( ulStillAliveCounts[ 1 ] == 0 ) )
\r
413 /* One or both of the test tasks are no longer sending
\r
414 'still alive' messages. */
\r
415 pcStatusMessage = "FAIL\r\n";
\r
418 /* Print a pass/fail message to the terminal. This will be
\r
419 visible in the CrossWorks IDE. */
\r
420 MPU_debug_printf( pcStatusMessage );
\r
422 /* Reset the count of 'still alive' messages. */
\r
423 memset( ulStillAliveCounts, 0x00, sizeof( ulStillAliveCounts ) );
\r
427 /* Something unexpected happened. Delete this task so the
\r
428 error is apparent (no output will be displayed). */
\r
434 /*-----------------------------------------------------------*/
\r
436 static void prvTestMemoryRegions( void )
\r
441 /* The check task (from which this function is called) is created in the
\r
442 Privileged mode. The privileged array can be both read from and written
\r
443 to while this task is privileged. */
\r
444 cPrivilegedOnlyAccessArray[ 0 ] = 'a';
\r
445 if( cPrivilegedOnlyAccessArray[ 0 ] != 'a' )
\r
447 /* Something unexpected happened. Delete this task so the error is
\r
448 apparent (no output will be displayed). */
\r
452 /* Writing off the end of the RAM allocated to this task will *NOT* cause a
\r
453 protection fault because the task is still executing in a privileged mode.
\r
454 Uncomment the following to test. */
\r
455 /*cPrivilegedOnlyAccessArray[ mainPRIVILEGED_ONLY_ACCESS_ALIGN_SIZE ] = 'a';*/
\r
457 /* Now set the task into user mode. */
\r
458 portSWITCH_TO_USER_MODE();
\r
460 /* Accessing the privileged only array will now cause a fault. Uncomment
\r
461 the following line to test. */
\r
462 /*cPrivilegedOnlyAccessArray[ 0 ] = 'a';*/
\r
464 /* The read/write array can still be successfully read and written. */
\r
465 for( l = 0; l < mainREAD_WRITE_ALIGN_SIZE; l++ )
\r
467 cReadWriteArray[ l ] = 'a';
\r
468 if( cReadWriteArray[ l ] != 'a' )
\r
470 /* Something unexpected happened. Delete this task so the error is
\r
471 apparent (no output will be displayed). */
\r
476 /* But attempting to read or write off the end of the RAM allocated to this
\r
477 task will cause a fault. Uncomment either of the following two lines to
\r
479 /* cReadWriteArray[ 0 ] = cReadWriteArray[ -1 ]; */
\r
480 /* cReadWriteArray[ mainREAD_WRITE_ALIGN_SIZE ] = 0x00; */
\r
482 /* The read only array can be successfully read... */
\r
483 for( l = 0; l < mainREAD_ONLY_ALIGN_SIZE; l++ )
\r
485 cTemp = cReadOnlyArray[ l ];
\r
488 /* ...but cannot be written. Uncomment the following line to test. */
\r
489 /* cReadOnlyArray[ 0 ] = 'a'; */
\r
491 /* Writing to the first and last locations in the stack array should not
\r
492 cause a protection fault. Note that doing this will cause the kernel to
\r
493 detect a stack overflow if configCHECK_FOR_STACK_OVERFLOW is greater than
\r
495 xCheckTaskStack[ 0 ] = 0;
\r
496 xCheckTaskStack[ mainCHECK_TASK_STACK_SIZE_WORDS - 1 ] = 0;
\r
498 /* Writing off either end of the stack array should cause a protection
\r
499 fault, uncomment either of the following two lines to test. */
\r
500 /* xCheckTaskStack[ -1 ] = 0; */
\r
501 /* xCheckTaskStack[ mainCHECK_TASK_STACK_SIZE_WORDS ] = 0; */
\r
505 /*-----------------------------------------------------------*/
\r
507 static void prvRegTest1Task( void *pvParameters )
\r
509 /* This task is created in privileged mode so can access the file scope
\r
510 queue variable. Take a stack copy of this before the task is set into user
\r
511 mode. Once this task is in user mode the file scope queue variable will no
\r
512 longer be accessible but the stack copy will. */
\r
513 xQueueHandle xQueue = xFileScopeCheckQueue;
\r
515 /* Now the queue handle has been obtained the task can switch to user
\r
516 mode. This is just one method of passing a handle into a protected
\r
517 task, the other reg test task uses the task parameter instead. */
\r
518 portSWITCH_TO_USER_MODE();
\r
520 /* First check that the parameter value is as expected. */
\r
521 if( pvParameters != ( void * ) 0x12345678 )
\r
523 /* Error detected. Delete the task so it stops communicating with
\r
531 /* This task tests the kernel context switch mechanism by reading and
\r
532 writing directly to registers - which requires the test to be written
\r
533 in assembly code. */
\r
536 " MOV R4, #104 \n" /* Set registers to a known value. R0 to R1 are done in the loop below. */
\r
541 " MOV R10, #110 \n"
\r
542 " MOV R11, #111 \n"
\r
544 " MOV R0, #100 \n" /* Set the scratch registers to known values - done inside the loop as they get clobbered. */
\r
548 " MOV R12, #112 \n"
\r
549 " SVC #1 \n" /* Yield just to increase test coverage. */
\r
550 " CMP R0, #100 \n" /* Check all the registers still contain their expected values. */
\r
551 " BNE prvDeleteMe \n" /* Value was not as expected, delete the task so it stops communicating with the check task. */
\r
553 " BNE prvDeleteMe \n"
\r
555 " BNE prvDeleteMe \n"
\r
557 " BNE prvDeleteMe \n"
\r
559 " BNE prvDeleteMe \n"
\r
561 " BNE prvDeleteMe \n"
\r
563 " BNE prvDeleteMe \n"
\r
565 " BNE prvDeleteMe \n"
\r
567 " BNE prvDeleteMe \n"
\r
568 " CMP R10, #110 \n"
\r
569 " BNE prvDeleteMe \n"
\r
570 " CMP R11, #111 \n"
\r
571 " BNE prvDeleteMe \n"
\r
572 " CMP R12, #112 \n"
\r
573 " BNE prvDeleteMe \n"
\r
574 :::"r0", "r1", "r2", "r3", "r4", "r5", "r6", "r8", "r9", "r10", "r11", "r12"
\r
577 /* Send mainREG_TEST_1_STILL_EXECUTING to the check task to indicate that this
\r
578 task is still functioning. */
\r
579 prvSendImAlive( xQueue, mainREG_TEST_1_STILL_EXECUTING );
\r
581 /* Go back to check all the register values again. */
\r
582 __asm volatile( " B reg1loop " );
\r
585 /*-----------------------------------------------------------*/
\r
587 static void prvRegTest2Task( void *pvParameters )
\r
589 /* The queue handle is passed in as the task parameter. This is one method of
\r
590 passing data into a protected task, the other reg test task uses a different
\r
592 xQueueHandle xQueue = ( xQueueHandle ) pvParameters;
\r
596 /* This task tests the kernel context switch mechanism by reading and
\r
597 writing directly to registers - which requires the test to be written
\r
598 in assembly code. */
\r
601 " MOV R4, #4 \n" /* Set registers to a known value. R0 to R1 are done in the loop below. */
\r
604 " MOV R8, #8 \n" /* Frame pointer is omitted as it must not be changed. */
\r
609 " MOV R0, #13 \n" /* Set the scratch registers to known values - done inside the loop as they get clobbered. */
\r
614 " CMP R0, #13 \n" /* Check all the registers still contain their expected values. */
\r
615 " BNE prvDeleteMe \n" /* Value was not as expected, delete the task so it stops communicating with the check task */
\r
617 " BNE prvDeleteMe \n"
\r
619 " BNE prvDeleteMe \n"
\r
621 " BNE prvDeleteMe \n"
\r
623 " BNE prvDeleteMe \n"
\r
625 " BNE prvDeleteMe \n"
\r
627 " BNE prvDeleteMe \n"
\r
629 " BNE prvDeleteMe \n"
\r
631 " BNE prvDeleteMe \n"
\r
633 " BNE prvDeleteMe \n"
\r
635 " BNE prvDeleteMe \n"
\r
637 " BNE prvDeleteMe \n"
\r
638 :::"r0", "r1", "r2", "r3", "r4", "r5", "r6", "r8", "r9", "r10", "r11", "r12"
\r
641 /* Send mainREG_TEST_2_STILL_EXECUTING to the check task to indicate that this
\r
642 task is still functioning. */
\r
643 prvSendImAlive( xQueue, mainREG_TEST_2_STILL_EXECUTING );
\r
645 /* Go back to check all the register values again. */
\r
646 __asm volatile( " B reg2loop " );
\r
649 /*-----------------------------------------------------------*/
\r
651 void vApplicationIdleHook( void )
\r
653 extern unsigned long __SRAM_segment_end__[];
\r
654 extern unsigned long __privileged_data_start__[];
\r
655 extern unsigned long __privileged_data_end__[];
\r
656 extern unsigned long __FLASH_segment_start__[];
\r
657 extern unsigned long __FLASH_segment_end__[];
\r
658 volatile unsigned long *pul;
\r
659 volatile unsigned long ulReadData;
\r
661 /* The idle task, and therefore this function, run in Supervisor mode and
\r
662 can therefore access all memory. Try reading from corners of flash and
\r
663 RAM to ensure a memory fault does not occur.
\r
665 Start with the edges of the privileged data area. */
\r
666 pul = __privileged_data_start__;
\r
668 pul = __privileged_data_end__ - 1;
\r
671 /* Next the standard SRAM area. */
\r
672 pul = __SRAM_segment_end__ - 1;
\r
675 /* And the standard Flash area - the start of which is marked for
\r
676 privileged access only. */
\r
677 pul = __FLASH_segment_start__;
\r
679 pul = __FLASH_segment_end__ - 1;
\r
682 /* Reading off the end of Flash or SRAM space should cause a fault.
\r
683 Uncomment one of the following two pairs of lines to test. */
\r
685 /* pul = __FLASH_segment_end__ + 4;
\r
686 ulReadData = *pul; */
\r
688 /* pul = __SRAM_segment_end__ + 1;
\r
689 ulReadData = *pul; */
\r
691 ( void ) ulReadData;
\r
693 /*-----------------------------------------------------------*/
\r
695 static void prvOldStyleUserModeTask( void *pvParameters )
\r
697 extern unsigned long __privileged_data_start__[];
\r
698 extern unsigned long __privileged_data_end__[];
\r
699 extern unsigned long __SRAM_segment_end__[];
\r
700 extern unsigned long __privileged_functions_end__[];
\r
701 extern unsigned long __FLASH_segment_start__[];
\r
702 extern unsigned long __FLASH_segment_end__[];
\r
703 const volatile unsigned long *pulStandardPeripheralRegister = ( volatile unsigned long * ) 0x400FC0C4; /* PCONP */
\r
704 volatile unsigned long *pul;
\r
705 volatile unsigned long ulReadData;
\r
707 /* The following lines are commented out to prevent the unused variable
\r
708 compiler warnings when the tests that use the variable are also commented out.
\r
709 extern unsigned long __privileged_functions_start__[];
\r
710 const volatile unsigned long *pulSystemPeripheralRegister = ( volatile unsigned long * ) 0xe000e014; */
\r
712 ( void ) pvParameters;
\r
714 /* This task is created in User mode using the original xTaskCreate() API
\r
715 function. It should have access to all Flash and RAM except that marked
\r
716 as Privileged access only. Reading from the start and end of the non-
\r
717 privileged RAM should not cause a problem (the privileged RAM is the first
\r
718 block at the bottom of the RAM memory). */
\r
719 pul = __privileged_data_end__ + 1;
\r
721 pul = __SRAM_segment_end__ - 1;
\r
724 /* Likewise reading from the start and end of the non-privileged Flash
\r
725 should not be a problem (the privileged Flash is the first block at the
\r
726 bottom of the Flash memory). */
\r
727 pul = __privileged_functions_end__ + 1;
\r
729 pul = __FLASH_segment_end__ - 1;
\r
732 /* Standard peripherals are accessible. */
\r
733 ulReadData = *pulStandardPeripheralRegister;
\r
735 /* System peripherals are not accessible. Uncomment the following line
\r
736 to test. Also uncomment the declaration of pulSystemPeripheralRegister
\r
737 at the top of this function. */
\r
738 /* ulReadData = *pulSystemPeripheralRegister; */
\r
740 /* Reading from anywhere inside the privileged Flash or RAM should cause a
\r
741 fault. This can be tested by uncommenting any of the following pairs of
\r
742 lines. Also uncomment the declaration of __privileged_functions_start__
\r
743 at the top of this function. */
\r
745 /* pul = __privileged_functions_start__;
\r
746 ulReadData = *pul; */
\r
748 /* pul = __privileged_functions_end__ - 1;
\r
749 ulReadData = *pul; */
\r
751 /* pul = __privileged_data_start__;
\r
752 ulReadData = *pul; */
\r
754 /* pul = __privileged_data_end__ - 1;
\r
755 ulReadData = *pul; */
\r
757 /* Must not just run off the end of a task function, so delete this task.
\r
758 Note that because this task was created using xTaskCreate() the stack was
\r
759 allocated dynamically and I have not included any code to free it again. */
\r
760 vTaskDelete( NULL );
\r
762 ( void ) ulReadData;
\r
764 /*-----------------------------------------------------------*/
\r
766 static void prvOldStylePrivilegedModeTask( void *pvParameters )
\r
768 extern unsigned long __privileged_data_start__[];
\r
769 extern unsigned long __privileged_data_end__[];
\r
770 extern unsigned long __SRAM_segment_end__[];
\r
771 extern unsigned long __privileged_functions_start__[];
\r
772 extern unsigned long __privileged_functions_end__[];
\r
773 extern unsigned long __FLASH_segment_start__[];
\r
774 extern unsigned long __FLASH_segment_end__[];
\r
775 volatile unsigned long *pul;
\r
776 volatile unsigned long ulReadData;
\r
777 const volatile unsigned long *pulSystemPeripheralRegister = ( volatile unsigned long * ) 0xe000e014; /* Systick */
\r
778 const volatile unsigned long *pulStandardPeripheralRegister = ( volatile unsigned long * ) 0x400FC0C4; /* PCONP */
\r
780 ( void ) pvParameters;
\r
782 /* This task is created in Privileged mode using the original xTaskCreate()
\r
783 API function. It should have access to all Flash and RAM including that
\r
784 marked as Privileged access only. So reading from the start and end of the
\r
785 non-privileged RAM should not cause a problem (the privileged RAM is the
\r
786 first block at the bottom of the RAM memory). */
\r
787 pul = __privileged_data_end__ + 1;
\r
789 pul = __SRAM_segment_end__ - 1;
\r
792 /* Likewise reading from the start and end of the non-privileged Flash
\r
793 should not be a problem (the privileged Flash is the first block at the
\r
794 bottom of the Flash memory). */
\r
795 pul = __privileged_functions_end__ + 1;
\r
797 pul = __FLASH_segment_end__ - 1;
\r
800 /* Reading from anywhere inside the privileged Flash or RAM should also
\r
801 not be a problem. */
\r
802 pul = __privileged_functions_start__;
\r
804 pul = __privileged_functions_end__ - 1;
\r
806 pul = __privileged_data_start__;
\r
808 pul = __privileged_data_end__ - 1;
\r
811 /* Finally, accessing both System and normal peripherals should both be
\r
813 ulReadData = *pulSystemPeripheralRegister;
\r
814 ulReadData = *pulStandardPeripheralRegister;
\r
816 /* Must not just run off the end of a task function, so delete this task.
\r
817 Note that because this task was created using xTaskCreate() the stack was
\r
818 allocated dynamically and I have not included any code to free it again. */
\r
819 vTaskDelete( NULL );
\r
821 ( void ) ulReadData;
\r
823 /*-----------------------------------------------------------*/
\r
825 static void prvDeleteMe( void )
\r
827 vTaskDelete( NULL );
\r
829 /*-----------------------------------------------------------*/
\r
831 static void prvSendImAlive( xQueueHandle xHandle, unsigned long ulTaskNumber )
\r
833 if( xHandle != NULL )
\r
835 xQueueSend( xHandle, &ulTaskNumber, mainDONT_BLOCK );
\r
838 /*-----------------------------------------------------------*/
\r
840 static void prvSetupHardware( void )
\r
842 /* If running on Rev A2 silicon, turn the LDO voltage up to 2.75V. This is
\r
843 a workaround to allow the PLL to operate reliably. */
\r
844 if( DEVICE_IS_REVA2 )
\r
846 SysCtlLDOSet( SYSCTL_LDO_2_75V );
\r
849 /* Set the clocking to run from the PLL at 50 MHz */
\r
850 SysCtlClockSet( SYSCTL_SYSDIV_4 | SYSCTL_USE_PLL | SYSCTL_OSC_MAIN | SYSCTL_XTAL_8MHZ );
\r
852 /*-----------------------------------------------------------*/
\r
854 void vApplicationTickHook( void )
\r
856 static unsigned long ulCallCount;
\r
857 const unsigned long ulCallsBetweenSends = 5000 / portTICK_RATE_MS;
\r
858 const unsigned long ulMessage = mainPRINT_SYSTEM_STATUS;
\r
859 portBASE_TYPE xDummy;
\r
861 /* If configUSE_TICK_HOOK is set to 1 then this function will get called
\r
862 from each RTOS tick. It is called from the tick interrupt and therefore
\r
863 will be executing in the privileged state. */
\r
867 /* Is it time to print out the pass/fail message again? */
\r
868 if( ulCallCount >= ulCallsBetweenSends )
\r
872 /* Send a message to the check task to command it to check that all
\r
873 the tasks are still running then print out the status.
\r
875 This is running in an ISR so has to use the "FromISR" version of
\r
876 xQueueSend(). Because it is in an ISR it is running with privileges
\r
877 so can access xFileScopeCheckQueue directly. */
\r
878 xQueueSendFromISR( xFileScopeCheckQueue, &ulMessage, &xDummy );
\r
881 /*-----------------------------------------------------------*/
\r
883 void vApplicationStackOverflowHook( xTaskHandle pxTask, char *pcTaskName )
\r
885 /* If configCHECK_FOR_STACK_OVERFLOW is set to either 1 or 2 then this
\r
886 function will automatically get called if a task overflows its stack. */
\r
888 ( void ) pcTaskName;
\r
891 /*-----------------------------------------------------------*/
\r
893 void vApplicationMallocFailedHook( void )
\r
895 /* If configUSE_MALLOC_FAILED_HOOK is set to 1 then this function will
\r
896 be called automatically if a call to pvPortMalloc() fails. pvPortMalloc()
\r
897 is called automatically when a task, queue or semaphore is created. */
\r
900 /*-----------------------------------------------------------*/
\r
902 /* Just to keep the linker happy. */
\r
903 void __error__( char *pcFilename, unsigned long ulLine )
\r
905 ( void ) pcFilename;
\r
909 /*-----------------------------------------------------------*/
\r
911 /* Just to keep the linker happy. */
\r
912 int uipprintf( const char *fmt, ... )
\r
917 /*-----------------------------------------------------------*/
\r
919 void hard_fault_handler(unsigned int * hardfault_args)
\r
921 volatile unsigned int stacked_r0;
\r
922 volatile unsigned int stacked_r1;
\r
923 volatile unsigned int stacked_r2;
\r
924 volatile unsigned int stacked_r3;
\r
925 volatile unsigned int stacked_r12;
\r
926 volatile unsigned int stacked_lr;
\r
927 volatile unsigned int stacked_pc;
\r
928 volatile unsigned int stacked_psr;
\r
930 stacked_r0 = ((unsigned long) hardfault_args[0]);
\r
931 stacked_r1 = ((unsigned long) hardfault_args[1]);
\r
932 stacked_r2 = ((unsigned long) hardfault_args[2]);
\r
933 stacked_r3 = ((unsigned long) hardfault_args[3]);
\r
935 stacked_r12 = ((unsigned long) hardfault_args[4]);
\r
936 stacked_lr = ((unsigned long) hardfault_args[5]);
\r
937 stacked_pc = ((unsigned long) hardfault_args[6]);
\r
938 stacked_psr = ((unsigned long) hardfault_args[7]);
\r
940 /* Inspect stacked_pc to locate the offending instruction. */
\r
943 ( void ) stacked_psr;
\r
944 ( void ) stacked_pc;
\r
945 ( void ) stacked_lr;
\r
946 ( void ) stacked_r12;
\r
947 ( void ) stacked_r0;
\r
948 ( void ) stacked_r1;
\r
949 ( void ) stacked_r2;
\r
950 ( void ) stacked_r3;
\r
952 /*-----------------------------------------------------------*/
\r
954 void Fault_ISR( void ) __attribute__((naked));
\r
955 void Fault_ISR( void )
\r
961 " mrseq r0, msp \n"
\r
962 " mrsne r0, psp \n"
\r
963 " ldr r1, [r0, #24] \n"
\r
964 " ldr r2, handler_address_const \n"
\r
966 " handler_address_const: .word hard_fault_handler \n"
\r
969 /*-----------------------------------------------------------*/
\r
971 void MPU_Fault_ISR( void ) __attribute__((naked));
\r
972 void MPU_Fault_ISR( void )
\r
978 " mrseq r0, msp \n"
\r
979 " mrsne r0, psp \n"
\r
980 " ldr r1, [r0, #24] \n"
\r
981 " ldr r2, handler_address_const \n"
\r
983 " handler2_address_const: .word hard_fault_handler \n"
\r
986 /*-----------------------------------------------------------*/