2 FreeRTOS V7.5.3 - Copyright (C) 2013 Real Time Engineers Ltd.
\r
5 VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
\r
7 ***************************************************************************
\r
9 * FreeRTOS provides completely free yet professionally developed, *
\r
10 * robust, strictly quality controlled, supported, and cross *
\r
11 * platform software that has become a de facto standard. *
\r
13 * Help yourself get started quickly and support the FreeRTOS *
\r
14 * project by purchasing a FreeRTOS tutorial book, reference *
\r
15 * manual, or both from: http://www.FreeRTOS.org/Documentation *
\r
19 ***************************************************************************
\r
21 This file is part of the FreeRTOS distribution.
\r
23 FreeRTOS is free software; you can redistribute it and/or modify it under
\r
24 the terms of the GNU General Public License (version 2) as published by the
\r
25 Free Software Foundation >>!AND MODIFIED BY!<< the FreeRTOS exception.
\r
27 >>! NOTE: The modification to the GPL is included to allow you to distribute
\r
28 >>! a combined work that includes FreeRTOS without being obliged to provide
\r
29 >>! the source code for proprietary components outside of the FreeRTOS
\r
32 FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
\r
33 WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
\r
34 FOR A PARTICULAR PURPOSE. Full license text is available from the following
\r
35 link: http://www.freertos.org/a00114.html
\r
39 ***************************************************************************
\r
41 * Having a problem? Start by reading the FAQ "My application does *
\r
42 * not run, what could be wrong?" *
\r
44 * http://www.FreeRTOS.org/FAQHelp.html *
\r
46 ***************************************************************************
\r
48 http://www.FreeRTOS.org - Documentation, books, training, latest versions,
\r
49 license and Real Time Engineers Ltd. contact details.
\r
51 http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
\r
52 including FreeRTOS+Trace - an indispensable productivity tool, a DOS
\r
53 compatible FAT file system, and our tiny thread aware UDP/IP stack.
\r
55 http://www.OpenRTOS.com - Real Time Engineers ltd license FreeRTOS to High
\r
56 Integrity Systems to sell under the OpenRTOS brand. Low cost OpenRTOS
\r
57 licenses offer ticketed support, indemnification and middleware.
\r
59 http://www.SafeRTOS.com - High Integrity Systems also provide a safety
\r
60 engineered and independently SIL3 certified version for use in safety and
\r
61 mission critical applications that require provable dependability.
\r
67 /* BASIC INTERRUPT DRIVEN SERIAL PORT DRIVER.
\r
69 NOTE: This driver is primarily to test the scheduler functionality. It does
\r
70 not effectively use the buffers or DMA and is therefore not intended to be
\r
71 an example of an efficient driver. */
\r
73 /* Standard include file. */
\r
76 /* Scheduler include files. */
\r
77 #include "FreeRTOS.h"
\r
81 /* Demo app include files. */
\r
84 /* Hardware setup. */
\r
87 #define serLOW_SPEED 0
\r
88 #define serONE_STOP_BIT 0
\r
89 #define serEIGHT_DATA_BITS_NO_PARITY 0
\r
90 #define serNORMAL_IDLE_STATE 0
\r
91 #define serAUTO_BAUD_OFF 0
\r
92 #define serLOOPBACK_OFF 0
\r
93 #define serWAKE_UP_DISABLE 0
\r
94 #define serNO_HARDWARE_FLOW_CONTROL 0
\r
95 #define serSTANDARD_IO 0
\r
96 #define serNO_IRDA 0
\r
97 #define serCONTINUE_IN_IDLE_MODE 0
\r
98 #define serUART_ENABLED 1
\r
99 #define serINTERRUPT_ON_SINGLE_CHAR 0
\r
100 #define serTX_ENABLE 1
\r
101 #define serINTERRUPT_ENABLE 1
\r
102 #define serINTERRUPT_DISABLE 0
\r
103 #define serCLEAR_FLAG 0
\r
104 #define serSET_FLAG 1
\r
107 /* The queues used to communicate between tasks and ISR's. */
\r
108 static xQueueHandle xRxedChars;
\r
109 static xQueueHandle xCharsForTx;
\r
111 static portBASE_TYPE xTxHasEnded;
\r
112 /*-----------------------------------------------------------*/
\r
114 xComPortHandle xSerialPortInitMinimal( unsigned long ulWantedBaud, unsigned portBASE_TYPE uxQueueLength )
\r
118 /* Create the queues used by the com test task. */
\r
119 xRxedChars = xQueueCreate( uxQueueLength, ( unsigned portBASE_TYPE ) sizeof( signed char ) );
\r
120 xCharsForTx = xQueueCreate( uxQueueLength, ( unsigned portBASE_TYPE ) sizeof( signed char ) );
\r
122 /* Setup the UART. */
\r
123 U2MODEbits.BRGH = serLOW_SPEED;
\r
124 U2MODEbits.STSEL = serONE_STOP_BIT;
\r
125 U2MODEbits.PDSEL = serEIGHT_DATA_BITS_NO_PARITY;
\r
126 U2MODEbits.RXINV = serNORMAL_IDLE_STATE;
\r
127 U2MODEbits.ABAUD = serAUTO_BAUD_OFF;
\r
128 U2MODEbits.LPBACK = serLOOPBACK_OFF;
\r
129 U2MODEbits.WAKE = serWAKE_UP_DISABLE;
\r
130 U2MODEbits.UEN = serNO_HARDWARE_FLOW_CONTROL;
\r
131 U2MODEbits.IREN = serNO_IRDA;
\r
132 U2MODEbits.USIDL = serCONTINUE_IN_IDLE_MODE;
\r
133 U2MODEbits.UARTEN = serUART_ENABLED;
\r
135 U2BRG = (unsigned short)(( (float)configCPU_CLOCK_HZ / ( (float)16 * (float)ulWantedBaud ) ) - (float)0.5);
\r
137 U2STAbits.URXISEL = serINTERRUPT_ON_SINGLE_CHAR;
\r
138 U2STAbits.UTXEN = serTX_ENABLE;
\r
139 U2STAbits.UTXINV = serNORMAL_IDLE_STATE;
\r
140 U2STAbits.UTXISEL0 = serINTERRUPT_ON_SINGLE_CHAR;
\r
141 U2STAbits.UTXISEL1 = serINTERRUPT_ON_SINGLE_CHAR;
\r
143 /* It is assumed that this function is called prior to the scheduler being
\r
144 started. Therefore interrupts must not be allowed to occur yet as they
\r
145 may attempt to perform a context switch. */
\r
146 portDISABLE_INTERRUPTS();
\r
148 IFS1bits.U2RXIF = serCLEAR_FLAG;
\r
149 IFS1bits.U2TXIF = serCLEAR_FLAG;
\r
150 IPC7bits.U2RXIP = configKERNEL_INTERRUPT_PRIORITY;
\r
151 IPC7bits.U2TXIP = configKERNEL_INTERRUPT_PRIORITY;
\r
152 IEC1bits.U2TXIE = serINTERRUPT_ENABLE;
\r
153 IEC1bits.U2RXIE = serINTERRUPT_ENABLE;
\r
155 /* Clear the Rx buffer. */
\r
156 while( U2STAbits.URXDA == serSET_FLAG )
\r
161 xTxHasEnded = pdTRUE;
\r
165 /*-----------------------------------------------------------*/
\r
167 signed portBASE_TYPE xSerialGetChar( xComPortHandle pxPort, signed char *pcRxedChar, portTickType xBlockTime )
\r
169 /* Only one port is supported. */
\r
172 /* Get the next character from the buffer. Return false if no characters
\r
173 are available or arrive before xBlockTime expires. */
\r
174 if( xQueueReceive( xRxedChars, pcRxedChar, xBlockTime ) )
\r
183 /*-----------------------------------------------------------*/
\r
185 signed portBASE_TYPE xSerialPutChar( xComPortHandle pxPort, signed char cOutChar, portTickType xBlockTime )
\r
187 /* Only one port is supported. */
\r
190 /* Return false if after the block time there is no room on the Tx queue. */
\r
191 if( xQueueSend( xCharsForTx, &cOutChar, xBlockTime ) != pdPASS )
\r
196 /* A critical section should not be required as xTxHasEnded will not be
\r
197 written to by the ISR if it is already 0 (is this correct?). */
\r
200 xTxHasEnded = pdFALSE;
\r
201 IFS1bits.U2TXIF = serSET_FLAG;
\r
206 /*-----------------------------------------------------------*/
\r
208 void vSerialClose( xComPortHandle xPort )
\r
210 /* Note implemented. */
\r
213 /*-----------------------------------------------------------*/
\r
215 void __attribute__((__interrupt__, auto_psv)) _U2RXInterrupt( void )
\r
218 portBASE_TYPE xHigherPriorityTaskWoken = pdFALSE;
\r
220 /* Get the character and post it on the queue of Rxed characters.
\r
221 If the post causes a task to wake force a context switch as the woken task
\r
222 may have a higher priority than the task we have interrupted. */
\r
223 IFS1bits.U2RXIF = serCLEAR_FLAG;
\r
224 while( U2STAbits.URXDA )
\r
227 xQueueSendFromISR( xRxedChars, &cChar, &xHigherPriorityTaskWoken );
\r
230 if( xHigherPriorityTaskWoken != pdFALSE )
\r
235 /*-----------------------------------------------------------*/
\r
237 void __attribute__((__interrupt__, auto_psv)) _U2TXInterrupt( void )
\r
240 portBASE_TYPE xHigherPriorityTaskWoken = pdFALSE;
\r
242 /* If the transmit buffer is full we cannot get the next character.
\r
243 Another interrupt will occur the next time there is space so this does
\r
245 IFS1bits.U2TXIF = serCLEAR_FLAG;
\r
246 while( !( U2STAbits.UTXBF ) )
\r
248 if( xQueueReceiveFromISR( xCharsForTx, &cChar, &xHigherPriorityTaskWoken ) == pdTRUE )
\r
250 /* Send the next character queued for Tx. */
\r
255 /* Queue empty, nothing to send. */
\r
256 xTxHasEnded = pdTRUE;
\r
261 if( xHigherPriorityTaskWoken != pdFALSE )
\r