2 * FreeRTOS Kernel V10.1.0
\r
3 * Copyright (C) 2018 Amazon.com, Inc. or its affiliates. All Rights Reserved.
\r
5 * Permission is hereby granted, free of charge, to any person obtaining a copy of
\r
6 * this software and associated documentation files (the "Software"), to deal in
\r
7 * the Software without restriction, including without limitation the rights to
\r
8 * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
\r
9 * the Software, and to permit persons to whom the Software is furnished to do so,
\r
10 * subject to the following conditions:
\r
12 * The above copyright notice and this permission notice shall be included in all
\r
13 * copies or substantial portions of the Software.
\r
15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
\r
16 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
\r
17 * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
\r
18 * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
\r
19 * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
\r
20 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
\r
22 * http://www.FreeRTOS.org
\r
23 * http://aws.amazon.com/freertos
\r
25 * 1 tab == 4 spaces!
\r
28 /* Hardware specific includes. */
\r
29 #include "iodefine.h"
\r
30 #include "typedefine.h"
\r
31 #include "r_ether.h"
\r
34 /* FreeRTOS includes. */
\r
35 #include "FreeRTOS.h"
\r
40 #include "net/uip.h"
\r
42 /* The time to wait between attempts to obtain a free buffer. */
\r
43 #define emacBUFFER_WAIT_DELAY_ms ( 3 / portTICK_PERIOD_MS )
\r
45 /* The number of times emacBUFFER_WAIT_DELAY_ms should be waited before giving
\r
46 up on attempting to obtain a free buffer all together. */
\r
47 #define emacBUFFER_WAIT_ATTEMPTS ( 30 )
\r
49 /* The number of Rx descriptors. */
\r
50 #define emacNUM_RX_DESCRIPTORS 8
\r
52 /* The number of Tx descriptors. When using uIP there is not point in having
\r
54 #define emacNUM_TX_BUFFERS 2
\r
56 /* The total number of EMAC buffers to allocate. */
\r
57 #define emacNUM_BUFFERS ( emacNUM_RX_DESCRIPTORS + emacNUM_TX_BUFFERS )
\r
59 /* The time to wait for the Tx descriptor to become free. */
\r
60 #define emacTX_WAIT_DELAY_ms ( 10 / portTICK_PERIOD_MS )
\r
62 /* The total number of times to wait emacTX_WAIT_DELAY_ms for the Tx descriptor to
\r
64 #define emacTX_WAIT_ATTEMPTS ( 50 )
\r
66 /* Only Rx end and Tx end interrupts are used by this driver. */
\r
67 #define emacTX_END_INTERRUPT ( 1UL << 21UL )
\r
68 #define emacRX_END_INTERRUPT ( 1UL << 18UL )
\r
70 /*-----------------------------------------------------------*/
\r
72 /* The buffers and descriptors themselves. */
\r
73 #pragma section _RX_DESC
\r
74 volatile ethfifo xRxDescriptors[ emacNUM_RX_DESCRIPTORS ];
\r
75 #pragma section _TX_DESC
\r
76 volatile ethfifo xTxDescriptors[ emacNUM_TX_BUFFERS ];
\r
77 #pragma section _ETHERNET_BUFFERS
\r
80 unsigned long ulAlignmentVariable;
\r
81 char cBuffer[ emacNUM_BUFFERS ][ UIP_BUFSIZE ];
\r
88 /* Used to indicate which buffers are free and which are in use. If an index
\r
89 contains 0 then the corresponding buffer in xEthernetBuffers is free, otherwise
\r
90 the buffer is in use or about to be used. */
\r
91 static unsigned char ucBufferInUse[ emacNUM_BUFFERS ];
\r
93 /*-----------------------------------------------------------*/
\r
96 * Initialise both the Rx and Tx descriptors.
\r
98 static void prvInitialiseDescriptors( void );
\r
101 * Return a pointer to a free buffer within xEthernetBuffers.
\r
103 static unsigned char *prvGetNextBuffer( void );
\r
106 * Return a buffer to the list of free buffers.
\r
108 static void prvReturnBuffer( unsigned char *pucBuffer );
\r
111 * Examine the status of the next Rx FIFO to see if it contains new data.
\r
113 static unsigned long prvCheckRxFifoStatus( void );
\r
116 * Setup the microcontroller for communication with the PHY.
\r
118 static void prvResetMAC( void );
\r
121 * Configure the Ethernet interface peripherals.
\r
123 static void prvConfigureEtherCAndEDMAC( void );
\r
126 * Something has gone wrong with the descriptor usage. Reset all the buffers
\r
129 static void prvResetEverything( void );
\r
131 /*-----------------------------------------------------------*/
\r
133 /* Points to the Rx descriptor currently in use. */
\r
134 static ethfifo *pxCurrentRxDesc = NULL;
\r
136 /* The buffer used by the uIP stack to both receive and send. This points to
\r
137 one of the Ethernet buffers when its actually in use. */
\r
138 unsigned char *uip_buf = NULL;
\r
140 /*-----------------------------------------------------------*/
\r
142 void vInitEmac( void )
\r
144 /* Software reset. */
\r
147 /* Set the Rx and Tx descriptors into their initial state. */
\r
148 prvInitialiseDescriptors();
\r
150 /* Set the MAC address into the ETHERC */
\r
151 ETHERC.MAHR = ( ( unsigned long ) configMAC_ADDR0 << 24UL ) |
\r
152 ( ( unsigned long ) configMAC_ADDR1 << 16UL ) |
\r
153 ( ( unsigned long ) configMAC_ADDR2 << 8UL ) |
\r
154 ( unsigned long ) configMAC_ADDR3;
\r
156 ETHERC.MALR.BIT.MA = ( ( unsigned long ) configMAC_ADDR4 << 8UL ) |
\r
157 ( unsigned long ) configMAC_ADDR5;
\r
159 /* Perform rest of interface hardware configuration. */
\r
160 prvConfigureEtherCAndEDMAC();
\r
162 /* Nothing received yet, so uip_buf points nowhere. */
\r
165 /* Initialize the PHY */
\r
168 /*-----------------------------------------------------------*/
\r
170 void vEMACWrite( void )
\r
174 /* Wait until the second transmission of the last packet has completed. */
\r
175 for( x = 0; x < emacTX_WAIT_ATTEMPTS; x++ )
\r
177 if( ( xTxDescriptors[ 1 ].status & ACT ) != 0 )
\r
179 /* Descriptor is still active. */
\r
180 vTaskDelay( emacTX_WAIT_DELAY_ms );
\r
188 /* Is the descriptor free after waiting for it? */
\r
189 if( ( xTxDescriptors[ 1 ].status & ACT ) != 0 )
\r
191 /* Something has gone wrong. */
\r
192 prvResetEverything();
\r
195 /* Setup both descriptors to transmit the frame. */
\r
196 xTxDescriptors[ 0 ].buf_p = ( char * ) uip_buf;
\r
197 xTxDescriptors[ 0 ].bufsize = uip_len;
\r
198 xTxDescriptors[ 1 ].buf_p = ( char * ) uip_buf;
\r
199 xTxDescriptors[ 1 ].bufsize = uip_len;
\r
201 /* uip_buf is being sent by the Tx descriptor. Allocate a new buffer
\r
202 for use by the stack. */
\r
203 uip_buf = prvGetNextBuffer();
\r
205 /* Clear previous settings and go. */
\r
206 xTxDescriptors[0].status &= ~( FP1 | FP0 );
\r
207 xTxDescriptors[0].status |= ( FP1 | FP0 | ACT );
\r
208 xTxDescriptors[1].status &= ~( FP1 | FP0 );
\r
209 xTxDescriptors[1].status |= ( FP1 | FP0 | ACT );
\r
211 EDMAC.EDTRR.LONG = 0x00000001;
\r
213 /*-----------------------------------------------------------*/
\r
215 unsigned long ulEMACRead( void )
\r
217 unsigned long ulBytesReceived;
\r
219 ulBytesReceived = prvCheckRxFifoStatus();
\r
221 if( ulBytesReceived > 0 )
\r
223 /* Mark the pxDescriptor buffer as free as uip_buf is going to be set to
\r
224 the buffer that contains the received data. */
\r
225 prvReturnBuffer( uip_buf );
\r
227 /* Point uip_buf to the data about ot be processed. */
\r
228 uip_buf = ( void * ) pxCurrentRxDesc->buf_p;
\r
230 /* Allocate a new buffer to the descriptor, as uip_buf is now using it's
\r
232 pxCurrentRxDesc->buf_p = prvGetNextBuffer();
\r
234 /* Prepare the descriptor to go again. */
\r
235 pxCurrentRxDesc->status &= ~( FP1 | FP0 );
\r
236 pxCurrentRxDesc->status |= ACT;
\r
238 /* Move onto the next buffer in the ring. */
\r
239 pxCurrentRxDesc = pxCurrentRxDesc->next;
\r
241 if( EDMAC.EDRRR.LONG == 0x00000000L )
\r
243 /* Restart Ethernet if it has stopped */
\r
244 EDMAC.EDRRR.LONG = 0x00000001L;
\r
248 return ulBytesReceived;
\r
250 /*-----------------------------------------------------------*/
\r
252 long lEMACWaitForLink( void )
\r
256 /* Set the link status. */
\r
257 switch( phy_set_autonegotiate() )
\r
259 /* Half duplex link */
\r
260 case PHY_LINK_100H:
\r
261 ETHERC.ECMR.BIT.DM = 0;
\r
262 ETHERC.ECMR.BIT.RTM = 1;
\r
267 ETHERC.ECMR.BIT.DM = 0;
\r
268 ETHERC.ECMR.BIT.RTM = 0;
\r
273 /* Full duplex link */
\r
274 case PHY_LINK_100F:
\r
275 ETHERC.ECMR.BIT.DM = 1;
\r
276 ETHERC.ECMR.BIT.RTM = 1;
\r
281 ETHERC.ECMR.BIT.DM = 1;
\r
282 ETHERC.ECMR.BIT.RTM = 0;
\r
291 if( lReturn == pdPASS )
\r
293 /* Enable receive and transmit. */
\r
294 ETHERC.ECMR.BIT.RE = 1;
\r
295 ETHERC.ECMR.BIT.TE = 1;
\r
297 /* Enable EDMAC receive */
\r
298 EDMAC.EDRRR.LONG = 0x1;
\r
303 /*-----------------------------------------------------------*/
\r
305 static void prvInitialiseDescriptors( void )
\r
307 ethfifo *pxDescriptor;
\r
310 for( x = 0; x < emacNUM_BUFFERS; x++ )
\r
312 /* Ensure none of the buffers are shown as in use at the start. */
\r
313 ucBufferInUse[ x ] = pdFALSE;
\r
316 /* Initialise the Rx descriptors. */
\r
317 for( x = 0; x < emacNUM_RX_DESCRIPTORS; x++ )
\r
319 pxDescriptor = &( xRxDescriptors[ x ] );
\r
320 pxDescriptor->buf_p = &( xEthernetBuffers.cBuffer[ x ][ 0 ] );
\r
322 pxDescriptor->bufsize = UIP_BUFSIZE;
\r
323 pxDescriptor->size = 0;
\r
324 pxDescriptor->status = ACT;
\r
325 pxDescriptor->next = &xRxDescriptors[ x + 1 ];
\r
327 /* Mark this buffer as in use. */
\r
328 ucBufferInUse[ x ] = pdTRUE;
\r
331 /* The last descriptor points back to the start. */
\r
332 pxDescriptor->status |= DL;
\r
333 pxDescriptor->next = &xRxDescriptors[ 0 ];
\r
335 /* Initialise the Tx descriptors. */
\r
336 for( x = 0; x < emacNUM_TX_BUFFERS; x++ )
\r
338 pxDescriptor = &( xTxDescriptors[ x ] );
\r
340 /* A buffer is not allocated to the Tx descriptor until a send is
\r
341 actually required. */
\r
342 pxDescriptor->buf_p = NULL;
\r
344 pxDescriptor->bufsize = UIP_BUFSIZE;
\r
345 pxDescriptor->size = 0;
\r
346 pxDescriptor->status = 0;
\r
347 pxDescriptor->next = &xTxDescriptors[ x + 1 ];
\r
350 /* The last descriptor points back to the start. */
\r
351 pxDescriptor->status |= DL;
\r
352 pxDescriptor->next = &( xTxDescriptors[ 0 ] );
\r
354 /* Use the first Rx descriptor to start with. */
\r
355 pxCurrentRxDesc = &( xRxDescriptors[ 0 ] );
\r
357 /*-----------------------------------------------------------*/
\r
359 static unsigned char *prvGetNextBuffer( void )
\r
362 unsigned char *pucReturn = NULL;
\r
363 unsigned long ulAttempts = 0;
\r
365 while( pucReturn == NULL )
\r
367 /* Look through the buffers to find one that is not in use by
\r
369 for( x = 0; x < emacNUM_BUFFERS; x++ )
\r
371 if( ucBufferInUse[ x ] == pdFALSE )
\r
373 ucBufferInUse[ x ] = pdTRUE;
\r
374 pucReturn = ( unsigned char * ) &( xEthernetBuffers.cBuffer[ x ][ 0 ] );
\r
379 /* Was a buffer found? */
\r
380 if( pucReturn == NULL )
\r
384 if( ulAttempts >= emacBUFFER_WAIT_ATTEMPTS )
\r
389 /* Wait then look again. */
\r
390 vTaskDelay( emacBUFFER_WAIT_DELAY_ms );
\r
396 /*-----------------------------------------------------------*/
\r
398 static void prvReturnBuffer( unsigned char *pucBuffer )
\r
402 /* Return a buffer to the pool of free buffers. */
\r
403 for( ul = 0; ul < emacNUM_BUFFERS; ul++ )
\r
405 if( &( xEthernetBuffers.cBuffer[ ul ][ 0 ] ) == ( void * ) pucBuffer )
\r
407 ucBufferInUse[ ul ] = pdFALSE;
\r
412 /*-----------------------------------------------------------*/
\r
414 static void prvResetEverything( void )
\r
416 /* Temporary code just to see if this gets called. This function has not
\r
417 been implemented. */
\r
418 portDISABLE_INTERRUPTS();
\r
421 /*-----------------------------------------------------------*/
\r
423 static unsigned long prvCheckRxFifoStatus( void )
\r
425 unsigned long ulReturn = 0;
\r
427 if( ( pxCurrentRxDesc->status & ACT ) != 0 )
\r
429 /* Current descriptor is still active. */
\r
431 else if( ( pxCurrentRxDesc->status & FE ) != 0 )
\r
433 /* Frame error. Clear the error. */
\r
434 pxCurrentRxDesc->status &= ~( FP1 | FP0 | FE );
\r
435 pxCurrentRxDesc->status &= ~( RMAF | RRF | RTLF | RTSF | PRE | CERF );
\r
436 pxCurrentRxDesc->status |= ACT;
\r
437 pxCurrentRxDesc = pxCurrentRxDesc->next;
\r
439 if( EDMAC.EDRRR.LONG == 0x00000000UL )
\r
441 /* Restart Ethernet if it has stopped. */
\r
442 EDMAC.EDRRR.LONG = 0x00000001UL;
\r
447 /* The descriptor contains a frame. Because of the size of the buffers
\r
448 the frame should always be complete. */
\r
449 if( ( pxCurrentRxDesc->status & FP0 ) == FP0 )
\r
451 ulReturn = pxCurrentRxDesc->size;
\r
455 /* Do not expect to get here. */
\r
456 prvResetEverything();
\r
462 /*-----------------------------------------------------------*/
\r
464 static void prvResetMAC( void )
\r
466 /* Ensure the EtherC and EDMAC are enabled. */
\r
467 SYSTEM.MSTPCRB.BIT.MSTPB15 = 0;
\r
468 vTaskDelay( 100 / portTICK_PERIOD_MS );
\r
470 EDMAC.EDMR.BIT.SWR = 1;
\r
472 /* Crude wait for reset to complete. */
\r
473 vTaskDelay( 500 / portTICK_PERIOD_MS );
\r
475 /*-----------------------------------------------------------*/
\r
477 static void prvConfigureEtherCAndEDMAC( void )
\r
479 /* Initialisation code taken from Renesas example project. */
\r
481 /* TODO: Check bit 5 */
\r
482 ETHERC.ECSR.LONG = 0x00000037; /* Clear all ETHERC statuS BFR, PSRTO, LCHNG, MPD, ICD */
\r
484 /* Set the EDMAC interrupt priority. */
\r
485 _IPR( _ETHER_EINT ) = configKERNEL_INTERRUPT_PRIORITY;
\r
487 /* Enable interrupts of interest only. */
\r
488 EDMAC.EESIPR.LONG = emacTX_END_INTERRUPT | emacRX_END_INTERRUPT;
\r
489 ETHERC.RFLR.LONG = 1518; /* Ether payload is 1500+ CRC */
\r
490 ETHERC.IPGR.LONG = 0x00000014; /* Intergap is 96-bit time */
\r
493 EDMAC.EESR.LONG = 0x47FF0F9F; /* Clear all ETHERC and EDMAC status bits */
\r
495 EDMAC.EDMR.BIT.DE = 1;
\r
497 EDMAC.RDLAR = ( void * ) pxCurrentRxDesc; /* Initialaize Rx Descriptor List Address */
\r
498 EDMAC.TDLAR = &( xTxDescriptors[ 0 ] ); /* Initialaize Tx Descriptor List Address */
\r
499 EDMAC.TRSCER.LONG = 0x00000000; /* Copy-back status is RFE & TFE only */
\r
500 EDMAC.TFTR.LONG = 0x00000000; /* Threshold of Tx_FIFO */
\r
501 EDMAC.FDR.LONG = 0x00000000; /* Transmit fifo & receive fifo is 256 bytes */
\r
502 EDMAC.RMCR.LONG = 0x00000003; /* Receive function is normal mode(continued) */
\r
503 ETHERC.ECMR.BIT.PRM = 0; /* Ensure promiscuous mode is off. */
\r
505 /* Enable the interrupt... */
\r
506 _IEN( _ETHER_EINT ) = 1;
\r
508 /*-----------------------------------------------------------*/
\r
510 #pragma interrupt ( vEMAC_ISR_Handler( vect = VECT_ETHER_EINT, enable ) )
\r
511 void vEMAC_ISR_Handler( void )
\r
513 unsigned long ul = EDMAC.EESR.LONG;
\r
514 long lHigherPriorityTaskWoken = pdFALSE;
\r
515 extern QueueHandle_t xEMACEventQueue;
\r
516 const unsigned long ulRxEvent = uipETHERNET_RX_EVENT;
\r
518 /* Has a Tx end occurred? */
\r
519 if( ul & emacTX_END_INTERRUPT )
\r
521 /* Only return the buffer to the pool once both Txes have completed. */
\r
522 prvReturnBuffer( ( void * ) xTxDescriptors[ 0 ].buf_p );
\r
523 EDMAC.EESR.LONG = emacTX_END_INTERRUPT;
\r
526 /* Has an Rx end occurred? */
\r
527 if( ul & emacRX_END_INTERRUPT )
\r
529 /* Make sure the Ethernet task is not blocked waiting for a packet. */
\r
530 xQueueSendFromISR( xEMACEventQueue, &ulRxEvent, &lHigherPriorityTaskWoken );
\r
531 portYIELD_FROM_ISR( lHigherPriorityTaskWoken );
\r
532 EDMAC.EESR.LONG = emacRX_END_INTERRUPT;
\r