2 * FreeRTOS Kernel V10.3.0
\r
3 * Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved.
\r
5 * Permission is hereby granted, free of charge, to any person obtaining a copy of
\r
6 * this software and associated documentation files (the "Software"), to deal in
\r
7 * the Software without restriction, including without limitation the rights to
\r
8 * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
\r
9 * the Software, and to permit persons to whom the Software is furnished to do so,
\r
10 * subject to the following conditions:
\r
12 * The above copyright notice and this permission notice shall be included in all
\r
13 * copies or substantial portions of the Software.
\r
15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
\r
16 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
\r
17 * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
\r
18 * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
\r
19 * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
\r
20 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
\r
22 * http://www.FreeRTOS.org
\r
23 * http://aws.amazon.com/freertos
\r
25 * 1 tab == 4 spaces!
\r
29 /* BASIC INTERRUPT DRIVEN SERIAL PORT DRIVER.
\r
31 * This file only supports UART 1
\r
34 /* Standard includes. */
\r
37 /* Scheduler includes. */
\r
38 #include "FreeRTOS.h"
\r
42 /* Demo application includes. */
\r
45 /* Constants required to setup the hardware. */
\r
46 #define serTX_AND_RX ( ( unsigned char ) 0x03 )
\r
48 /* Misc. constants. */
\r
49 #define serNO_BLOCK ( ( TickType_t ) 0 )
\r
51 /* Enable the UART Tx interrupt. */
\r
52 #define vInterruptOn() IFG2 |= UTXIFG1
\r
54 /* The queue used to hold received characters. */
\r
55 static QueueHandle_t xRxedChars;
\r
57 /* The queue used to hold characters waiting transmission. */
\r
58 static QueueHandle_t xCharsForTx;
\r
60 static volatile short sTHREEmpty;
\r
62 /*-----------------------------------------------------------*/
\r
64 xComPortHandle xSerialPortInitMinimal( unsigned long ulWantedBaud, unsigned portBASE_TYPE uxQueueLength )
\r
66 unsigned long ulBaudRateCount;
\r
68 /* Initialise the hardware. */
\r
70 /* Generate the baud rate constants for the wanted baud rate. */
\r
71 ulBaudRateCount = configCPU_CLOCK_HZ / ulWantedBaud;
\r
73 portENTER_CRITICAL();
\r
75 /* Create the queues used by the com test task. */
\r
76 xRxedChars = xQueueCreate( uxQueueLength, ( unsigned portBASE_TYPE ) sizeof( signed char ) );
\r
77 xCharsForTx = xQueueCreate( uxQueueLength, ( unsigned portBASE_TYPE ) sizeof( signed char ) );
\r
82 /* Set pin function. */
\r
83 P4SEL |= serTX_AND_RX;
\r
85 /* All other bits remain at zero for n, 8, 1 interrupt driven operation.
\r
87 U1CTL |= CHAR + LISTEN;
\r
90 /* Setup baud rate low byte. */
\r
91 U1BR0 = ( unsigned char ) ( ulBaudRateCount & ( unsigned long ) 0xff );
\r
93 /* Setup baud rate high byte. */
\r
94 ulBaudRateCount >>= 8UL;
\r
95 U1BR1 = ( unsigned char ) ( ulBaudRateCount & ( unsigned long ) 0xff );
\r
98 ME2 |= UTXE1 + URXE1;
\r
103 /* Nothing in the buffer yet. */
\r
104 sTHREEmpty = pdTRUE;
\r
106 /* Enable interrupts. */
\r
107 IE2 |= URXIE1 + UTXIE1;
\r
109 portEXIT_CRITICAL();
\r
111 /* Unlike other ports, this serial code does not allow for more than one
\r
112 com port. We therefore don't return a pointer to a port structure and can
\r
113 instead just return NULL. */
\r
116 /*-----------------------------------------------------------*/
\r
118 signed portBASE_TYPE xSerialGetChar( xComPortHandle pxPort, signed char *pcRxedChar, TickType_t xBlockTime )
\r
120 /* Get the next character from the buffer. Return false if no characters
\r
121 are available, or arrive before xBlockTime expires. */
\r
122 if( xQueueReceive( xRxedChars, pcRxedChar, xBlockTime ) )
\r
131 /*-----------------------------------------------------------*/
\r
133 signed portBASE_TYPE xSerialPutChar( xComPortHandle pxPort, signed char cOutChar, TickType_t xBlockTime )
\r
135 signed portBASE_TYPE xReturn;
\r
137 /* Transmit a character. */
\r
139 portENTER_CRITICAL();
\r
141 if( sTHREEmpty == pdTRUE )
\r
143 /* If sTHREEmpty is true then the UART Tx ISR has indicated that
\r
144 there are no characters queued to be transmitted - so we can
\r
145 write the character directly to the shift Tx register. */
\r
146 sTHREEmpty = pdFALSE;
\r
147 U1TXBUF = cOutChar;
\r
152 /* sTHREEmpty is false, so there are still characters waiting to be
\r
153 transmitted. We have to queue this character so it gets
\r
154 transmitted in turn. */
\r
156 /* Return false if after the block time there is no room on the Tx
\r
157 queue. It is ok to block inside a critical section as each task
\r
158 maintains it's own critical section status. */
\r
159 xReturn = xQueueSend( xCharsForTx, &cOutChar, xBlockTime );
\r
161 /* Depending on queue sizing and task prioritisation: While we
\r
162 were blocked waiting to post on the queue interrupts were not
\r
163 disabled. It is possible that the serial ISR has emptied the
\r
164 Tx queue, in which case we need to start the Tx off again
\r
165 writing directly to the Tx register. */
\r
166 if( ( sTHREEmpty == pdTRUE ) && ( xReturn == pdPASS ) )
\r
168 /* Get back the character we just posted. */
\r
169 xQueueReceive( xCharsForTx, &cOutChar, serNO_BLOCK );
\r
170 sTHREEmpty = pdFALSE;
\r
171 U1TXBUF = cOutChar;
\r
175 portEXIT_CRITICAL();
\r
179 /*-----------------------------------------------------------*/
\r
181 #if configINTERRUPT_EXAMPLE_METHOD == 1
\r
184 * UART RX interrupt service routine.
\r
186 void vRxISR( void ) __interrupt[ UART1RX_VECTOR ]
\r
189 portBASE_TYPE xHigherPriorityTaskWoken = pdFALSE;
\r
191 /* Get the character from the UART and post it on the queue of Rxed
\r
195 xQueueSendFromISR( xRxedChars, &cChar, &xHigherPriorityTaskWoken );
\r
197 if( xHigherPriorityTaskWoken )
\r
199 /*If the post causes a task to wake force a context switch
\r
200 as the woken task may have a higher priority than the task we have
\r
205 /* Make sure any low power mode bits are clear before leaving the ISR. */
\r
206 __bic_SR_register_on_exit( SCG1 + SCG0 + OSCOFF + CPUOFF );
\r
208 /*-----------------------------------------------------------*/
\r
211 * UART Tx interrupt service routine.
\r
213 void vTxISR( void ) __interrupt[ UART1TX_VECTOR ]
\r
216 portBASE_TYPE xTaskWoken = pdFALSE;
\r
218 /* The previous character has been transmitted. See if there are any
\r
219 further characters waiting transmission. */
\r
221 if( xQueueReceiveFromISR( xCharsForTx, &cChar, &xTaskWoken ) == pdTRUE )
\r
223 /* There was another character queued - transmit it now. */
\r
228 /* There were no other characters to transmit. */
\r
229 sTHREEmpty = pdTRUE;
\r
232 /* Make sure any low power mode bits are clear before leaving the ISR. */
\r
233 __bic_SR_register_on_exit( SCG1 + SCG0 + OSCOFF + CPUOFF );
\r
235 /*-----------------------------------------------------------*/
\r
237 #elif configINTERRUPT_EXAMPLE_METHOD == 2
\r
239 /* This is a standard C function as an assembly file wrapper is used as an
\r
240 interrupt entry point. */
\r
241 void vRxISR( void )
\r
244 portBASE_TYPE xHigherPriorityTaskWoken = pdFALSE;
\r
246 /* Get the character from the UART and post it on the queue of Rxed
\r
250 xQueueSendFromISR( xRxedChars, &cChar, &xHigherPriorityTaskWoken );
\r
252 /*If the post causes a task to wake force a context switch
\r
253 as the woken task may have a higher priority than the task we have
\r
255 portYIELD_FROM_ISR( xHigherPriorityTaskWoken );
\r
257 /*-----------------------------------------------------------*/
\r
259 /* This is a standard C function as an assembly file wrapper is used as an
\r
260 interrupt entry point. */
\r
261 void vTxISR( void )
\r
264 portBASE_TYPE xTaskWoken = pdFALSE;
\r
266 /* The previous character has been transmitted. See if there are any
\r
267 further characters waiting transmission. */
\r
269 if( xQueueReceiveFromISR( xCharsForTx, &cChar, &xTaskWoken ) == pdTRUE )
\r
271 /* There was another character queued - transmit it now. */
\r
276 /* There were no other characters to transmit. */
\r
277 sTHREEmpty = pdTRUE;
\r
281 #endif /* configINTERRUPT_EXAMPLE_METHOD */
\r
282 /*-----------------------------------------------------------*/
\r