2 * FreeRTOS Kernel V10.2.1
\r
3 * Copyright (C) 2019 Amazon.com, Inc. or its affiliates. All Rights Reserved.
\r
5 * Permission is hereby granted, free of charge, to any person obtaining a copy of
\r
6 * this software and associated documentation files (the "Software"), to deal in
\r
7 * the Software without restriction, including without limitation the rights to
\r
8 * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
\r
9 * the Software, and to permit persons to whom the Software is furnished to do so,
\r
10 * subject to the following conditions:
\r
12 * The above copyright notice and this permission notice shall be included in all
\r
13 * copies or substantial portions of the Software.
\r
15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
\r
16 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
\r
17 * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
\r
18 * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
\r
19 * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
\r
20 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
\r
22 * http://www.FreeRTOS.org
\r
23 * http://aws.amazon.com/freertos
\r
25 * 1 tab == 4 spaces!
\r
35 /*------------------------------------------------------------------------------
\r
36 * Port specific definitions.
\r
38 * The settings in this file configure FreeRTOS correctly for the given hardware
\r
41 * These settings should not be altered.
\r
42 *------------------------------------------------------------------------------
\r
45 #ifndef configENABLE_FPU
\r
46 #error configENABLE_FPU must be defined in FreeRTOSConfig.h. Set configENABLE_FPU to 1 to enable the FPU or 0 to disable the FPU.
\r
47 #endif /* configENABLE_FPU */
\r
49 #ifndef configENABLE_MPU
\r
50 #error configENABLE_MPU must be defined in FreeRTOSConfig.h. Set configENABLE_MPU to 1 to enable the MPU or 0 to disable the MPU.
\r
51 #endif /* configENABLE_MPU */
\r
53 #ifndef configENABLE_TRUSTZONE
\r
54 #error configENABLE_TRUSTZONE must be defined in FreeRTOSConfig.h. Set configENABLE_TRUSTZONE to 1 to enable TrustZone or 0 to disable TrustZone.
\r
55 #endif /* configENABLE_TRUSTZONE */
\r
57 /*-----------------------------------------------------------*/
\r
60 * @brief Type definitions.
\r
62 #define portCHAR char
\r
63 #define portFLOAT float
\r
64 #define portDOUBLE double
\r
65 #define portLONG long
\r
66 #define portSHORT short
\r
67 #define portSTACK_TYPE uint32_t
\r
68 #define portBASE_TYPE long
\r
70 typedef portSTACK_TYPE StackType_t;
\r
71 typedef long BaseType_t;
\r
72 typedef unsigned long UBaseType_t;
\r
74 #if( configUSE_16_BIT_TICKS == 1 )
\r
75 typedef uint16_t TickType_t;
\r
76 #define portMAX_DELAY ( TickType_t ) 0xffff
\r
78 typedef uint32_t TickType_t;
\r
79 #define portMAX_DELAY ( TickType_t ) 0xffffffffUL
\r
81 /* 32-bit tick type on a 32-bit architecture, so reads of the tick count do
\r
82 * not need to be guarded with a critical section. */
\r
83 #define portTICK_TYPE_IS_ATOMIC 1
\r
85 /*-----------------------------------------------------------*/
\r
88 * Architecture specifics.
\r
90 #define portARCH_NAME "Cortex-M33"
\r
91 #define portSTACK_GROWTH ( -1 )
\r
92 #define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ )
\r
93 #define portBYTE_ALIGNMENT 8
\r
95 #define portINLINE __inline
\r
96 #ifndef portFORCE_INLINE
\r
97 #define portFORCE_INLINE inline __attribute__(( always_inline ))
\r
99 #define portHAS_STACK_OVERFLOW_CHECKING 1
\r
100 #define portDONT_DISCARD __root
\r
101 /*-----------------------------------------------------------*/
\r
104 * @brief Extern declarations.
\r
106 extern BaseType_t xPortIsInsideInterrupt( void );
\r
108 extern void vPortYield( void ) /* PRIVILEGED_FUNCTION */;
\r
110 extern void vPortEnterCritical( void ) /* PRIVILEGED_FUNCTION */;
\r
111 extern void vPortExitCritical( void ) /* PRIVILEGED_FUNCTION */;
\r
113 extern uint32_t ulSetInterruptMask( void ) /* __attribute__(( naked )) PRIVILEGED_FUNCTION */;
\r
114 extern void vClearInterruptMask( uint32_t ulMask ) /* __attribute__(( naked )) PRIVILEGED_FUNCTION */;
\r
116 #if( configENABLE_TRUSTZONE == 1 )
\r
117 extern void vPortAllocateSecureContext( uint32_t ulSecureStackSize ); /* __attribute__ (( naked )) */
\r
118 extern void vPortFreeSecureContext( uint32_t *pulTCB ) /* __attribute__ (( naked )) PRIVILEGED_FUNCTION */;
\r
119 #endif /* configENABLE_TRUSTZONE */
\r
121 #if( configENABLE_MPU == 1 )
\r
122 extern BaseType_t xIsPrivileged( void ) /* __attribute__ (( naked )) */;
\r
123 extern void vResetPrivilege( void ) /* __attribute__ (( naked )) */;
\r
124 #endif /* configENABLE_MPU */
\r
125 /*-----------------------------------------------------------*/
\r
128 * @brief MPU specific constants.
\r
130 #if( configENABLE_MPU == 1 )
\r
131 #define portUSING_MPU_WRAPPERS 1
\r
132 #define portPRIVILEGE_BIT ( 0x80000000UL )
\r
134 #define portPRIVILEGE_BIT ( 0x0UL )
\r
135 #endif /* configENABLE_MPU */
\r
139 #define portPRIVILEGED_FLASH_REGION ( 0UL )
\r
140 #define portUNPRIVILEGED_FLASH_REGION ( 1UL )
\r
141 #define portUNPRIVILEGED_SYSCALLS_REGION ( 2UL )
\r
142 #define portPRIVILEGED_RAM_REGION ( 3UL )
\r
143 #define portSTACK_REGION ( 4UL )
\r
144 #define portFIRST_CONFIGURABLE_REGION ( 5UL )
\r
145 #define portLAST_CONFIGURABLE_REGION ( 7UL )
\r
146 #define portNUM_CONFIGURABLE_REGIONS ( ( portLAST_CONFIGURABLE_REGION - portFIRST_CONFIGURABLE_REGION ) + 1 )
\r
147 #define portTOTAL_NUM_REGIONS ( portNUM_CONFIGURABLE_REGIONS + 1 ) /* Plus one to make space for the stack region. */
\r
149 /* Device memory attributes used in MPU_MAIR registers.
\r
151 * 8-bit values encoded as follows:
\r
152 * Bit[7:4] - 0000 - Device Memory
\r
153 * Bit[3:2] - 00 --> Device-nGnRnE
\r
154 * 01 --> Device-nGnRE
\r
155 * 10 --> Device-nGRE
\r
156 * 11 --> Device-GRE
\r
157 * Bit[1:0] - 00, Reserved.
\r
159 #define portMPU_DEVICE_MEMORY_nGnRnE ( 0x00 ) /* 0000 0000 */
\r
160 #define portMPU_DEVICE_MEMORY_nGnRE ( 0x04 ) /* 0000 0100 */
\r
161 #define portMPU_DEVICE_MEMORY_nGRE ( 0x08 ) /* 0000 1000 */
\r
162 #define portMPU_DEVICE_MEMORY_GRE ( 0x0C ) /* 0000 1100 */
\r
164 /* Normal memory attributes used in MPU_MAIR registers. */
\r
165 #define portMPU_NORMAL_MEMORY_NON_CACHEABLE ( 0x44 ) /* Non-cacheable. */
\r
166 #define portMPU_NORMAL_MEMORY_BUFFERABLE_CACHEABLE ( 0xFF ) /* Non-Transient, Write-back, Read-Allocate and Write-Allocate. */
\r
168 /* Attributes used in MPU_RBAR registers. */
\r
169 #define portMPU_REGION_NON_SHAREABLE ( 0UL << 3UL )
\r
170 #define portMPU_REGION_INNER_SHAREABLE ( 1UL << 3UL )
\r
171 #define portMPU_REGION_OUTER_SHAREABLE ( 2UL << 3UL )
\r
173 #define portMPU_REGION_PRIVILEGED_READ_WRITE ( 0UL << 1UL )
\r
174 #define portMPU_REGION_READ_WRITE ( 1UL << 1UL )
\r
175 #define portMPU_REGION_PRIVILEGED_READ_ONLY ( 2UL << 1UL )
\r
176 #define portMPU_REGION_READ_ONLY ( 3UL << 1UL )
\r
178 #define portMPU_REGION_EXECUTE_NEVER ( 1UL )
\r
179 /*-----------------------------------------------------------*/
\r
182 * @brief Settings to define an MPU region.
\r
184 typedef struct MPURegionSettings
\r
186 uint32_t ulRBAR; /**< RBAR for the region. */
\r
187 uint32_t ulRLAR; /**< RLAR for the region. */
\r
188 } MPURegionSettings_t;
\r
191 * @brief MPU settings as stored in the TCB.
\r
193 typedef struct MPU_SETTINGS
\r
195 uint32_t ulMAIR0; /**< MAIR0 for the task containing attributes for all the 4 per task regions. */
\r
196 MPURegionSettings_t xRegionsSettings[ portTOTAL_NUM_REGIONS ]; /**< Settings for 4 per task regions. */
\r
198 /*-----------------------------------------------------------*/
\r
201 * @brief SVC numbers.
\r
203 #define portSVC_ALLOCATE_SECURE_CONTEXT 0
\r
204 #define portSVC_FREE_SECURE_CONTEXT 1
\r
205 #define portSVC_START_SCHEDULER 2
\r
206 #define portSVC_RAISE_PRIVILEGE 3
\r
207 /*-----------------------------------------------------------*/
\r
210 * @brief Scheduler utilities.
\r
212 #define portYIELD() vPortYield()
\r
213 #define portNVIC_INT_CTRL_REG ( * ( ( volatile uint32_t * ) 0xe000ed04 ) )
\r
214 #define portNVIC_PENDSVSET_BIT ( 1UL << 28UL )
\r
215 #define portEND_SWITCHING_ISR( xSwitchRequired ) if( xSwitchRequired ) portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT
\r
216 #define portYIELD_FROM_ISR( x ) portEND_SWITCHING_ISR( x )
\r
217 /*-----------------------------------------------------------*/
\r
220 * @brief Critical section management.
\r
222 #define portSET_INTERRUPT_MASK_FROM_ISR() ulSetInterruptMask()
\r
223 #define portCLEAR_INTERRUPT_MASK_FROM_ISR(x) vClearInterruptMask( x )
\r
224 #define portDISABLE_INTERRUPTS() ulSetInterruptMask()
\r
225 #define portENABLE_INTERRUPTS() vClearInterruptMask( 0 )
\r
226 #define portENTER_CRITICAL() vPortEnterCritical()
\r
227 #define portEXIT_CRITICAL() vPortExitCritical()
\r
228 /*-----------------------------------------------------------*/
\r
231 * @brief Task function macros as described on the FreeRTOS.org WEB site.
\r
233 #define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void *pvParameters )
\r
234 #define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void *pvParameters )
\r
235 /*-----------------------------------------------------------*/
\r
237 #if( configENABLE_TRUSTZONE == 1 )
\r
239 * @brief Allocate a secure context for the task.
\r
241 * Tasks are not created with a secure context. Any task that is going to call
\r
242 * secure functions must call portALLOCATE_SECURE_CONTEXT() to allocate itself a
\r
243 * secure context before it calls any secure function.
\r
245 * @param[in] ulSecureStackSize The size of the secure stack to be allocated.
\r
247 #define portALLOCATE_SECURE_CONTEXT( ulSecureStackSize ) vPortAllocateSecureContext( ulSecureStackSize )
\r
250 * @brief Called when a task is deleted to delete the task's secure context,
\r
253 * @param[in] pxTCB The TCB of the task being deleted.
\r
255 #define portCLEAN_UP_TCB( pxTCB ) vPortFreeSecureContext( ( uint32_t * ) pxTCB )
\r
257 #define portALLOCATE_SECURE_CONTEXT( ulSecureStackSize )
\r
258 #define portCLEAN_UP_TCB( pxTCB )
\r
259 #endif /* configENABLE_TRUSTZONE */
\r
260 /*-----------------------------------------------------------*/
\r
262 #if( configENABLE_MPU == 1 )
\r
264 * @brief Checks whether or not the processor is privileged.
\r
266 * @return 1 if the processor is already privileged, 0 otherwise.
\r
268 #define portIS_PRIVILEGED() xIsPrivileged()
\r
271 * @brief Raise an SVC request to raise privilege.
\r
273 * The SVC handler checks that the SVC was raised from a system call and only
\r
274 * then it raises the privilege. If this is called from any other place,
\r
275 * the privilege is not raised.
\r
277 #define portRAISE_PRIVILEGE() __asm volatile ( "svc %0 \n" :: "i" ( portSVC_RAISE_PRIVILEGE ) : "memory" );
\r
280 * @brief Lowers the privilege level by setting the bit 0 of the CONTROL
\r
283 #define portRESET_PRIVILEGE() vResetPrivilege()
\r
285 #define portIS_PRIVILEGED()
\r
286 #define portRAISE_PRIVILEGE()
\r
287 #define portRESET_PRIVILEGE()
\r
288 #endif /* configENABLE_MPU */
\r
289 /*-----------------------------------------------------------*/
\r
294 #define portMEMORY_BARRIER() __asm volatile( "" ::: "memory" )
\r
295 /*-----------------------------------------------------------*/
\r
297 /* Suppress warnings that are generated by the IAR tools, but cannot be fixed in
\r
298 * the source code because to do so would cause other compilers to generate
\r
300 #pragma diag_suppress=Be006
\r
301 #pragma diag_suppress=Pa082
\r
302 /*-----------------------------------------------------------*/
\r
308 #endif /* PORTMACRO_H */
\r