1 #-----------------------------------------------------------------------------
2 # Copyright 1998 The OpenLDAP Foundation, Redwood City, California, USA
5 # Redistribution and use in source and binary forms are permitted only
6 # as authorized by the OpenLDAP Public License. A copy of this
7 # license is available at http://www.OpenLDAP.org/license.html or
8 # in file LICENSE in the top-level directory of the distribution.
10 # This work is derived from the University of Michigan LDAP v3.3
11 # distribution. Information concerning is available at
12 # http://www.umich.edu/~dirsvcs/ldap/ldap.html.
14 # This work also contains materials derived from public sources.
15 #-----------------------------------------------------------------------------
16 # Copyright (c) 1994 Regents of the University of Michigan.
17 # All rights reserved.
19 # Redistribution and use in source and binary forms are permitted
20 # provided that this notice is preserved and that due credit is given
21 # to the University of Michigan at Ann Arbor. The name of the University
22 # may not be used to endorse or promote products derived from this
23 # software without specific prior written permission. This software
24 # is provided ``as is'' without express or implied warranty.
25 #-----------------------------------------------------------------------------
26 # LDAP common Make defines (included in all but top-level Makefile)
28 #############################################################################
29 ## Edit the following variables to have appropriate values for your system ##
30 #############################################################################
33 # This template should be used by systems with Gnu Make.
35 # If Gnu make is not installed as make, you must uncomment out
39 #############################################################################
40 ## LDAP install paths ##
41 #############################################################################
42 # by default, everything is installed below INSTROOT
43 # config files, etc. are put in ETCDIR
44 # include files get put in INCLUDEDIR
45 # libraries are put in LIBDIR
46 # man pages are put under MANDIR
47 # programs end-users will run are put in BINDIR
48 # programs sysadmins will run are put in SBINDIR
49 # servers are put in LIBEXECDIR
50 # pid/args files are put in RUNDIR
52 # Per platform defaults override these.
55 LDAP_PREFIX= /usr/local
58 LDAP_INSTROOT= $(LDAP_PREFIX)
61 LDAP_ETCDIR= $(LDAP_INSTROOT)/etc/ldap
64 LDAP_INCDIR= $(LDAP_INSTROOT)/include
67 LDAP_LIBDIR= $(LDAP_INSTROOT)/lib
70 LDAP_MANDIR= $(LDAP_INSTROOT)/man
73 LDAP_BINDIR= $(LDAP_INSTROOT)/bin
76 LDAP_SBINDIR=$(LDAP_INSTROOT)/sbin
78 ifndef LDAP_LIBEXECDIR
79 LDAP_LIBEXECDIR= $(LDAP_INSTROOT)/libexec
82 LDAP_RUNDIR= $(LDAP_ETCDIR)
85 #############################################################################
86 ## General compiler options ##
87 #############################################################################
88 # Passed to every compile (cc or gcc). This is where you put -O or -g, etc.
94 # Passed to every link (ld). Include -g here if you did in EXTRACFLAGS.
99 #############################################################################
100 ## If you are NOT using Kerberos authentication, you can skip this section.##
101 #############################################################################
103 # Otherwise, to enable kerberos authentication, uncomment KERBEROS (and
104 # AFSKERBEROS if you are running the AFS version of kerberos). Also
105 # uncomment and change the various KRB* lines to point to where the
106 # kerberos libraries and include files are installed at your site.
109 #AFSKERBEROS=-DAFSKERBEROS
110 #KRBINCLUDEFLAG = -I/usr/local/kerberos/include
111 #KRBLIBFLAG = -L/usr/local/kerberos/lib
112 #KRBLIBS = -lkrb -ldes
114 #############################################################################
115 ## ISODE is required ONLY to build the ldap <-> X.500 server (ldapd) ##
116 ## If you don't want to build it, you can skip this section. ##
117 #############################################################################
119 # To build the ldap server, uncomment the HAVEISODE line,
120 # and the section describing build settings for your version of isode.
123 # If you compiled ISODE with TURBO_DISK defined, uncomment this
124 #ISODETURBOLIBS = -lgdbm
125 # uncomment these to have ldapd "pretty print" protocol elements w/debugging
126 #PEPSY_DUMP=-DPEPSY_DUMP
127 #PEPSY=/usr/local/ic/bin/pepsy
128 # uncommment this line to have ldapd load PP syntax handlers
129 # you'll also need to add -lpp to ISODEBASELIBS below
130 #LDAP_USE_PP=-DLDAP_USE_PP
131 # uncomment NO_SETPROCTITLE to have ldapd NOT change its title
132 #NO_SETPROCTITLE=-DNOSETPROCTITLE
134 # ISODE Consortium release build settings
135 # You should change the next line so that ICRELEASE matches the (integer)
136 # version number of whatever IC release you have, e.g. 1, 2, or 3 and
137 # also uncomment the next 5 lines.
138 #ICRELEASE=-DICRELEASE=1
139 #ISODEPACKAGE=-DISODEPACKAGE=IC
140 #ISODEINCLUDEFLAG= -I/usr/local/ic/include/isode -I/usr/local/ic/include
141 #ISODELIBFLAG = -L/usr/local/ic/lib
142 #ISODEBASELIBS = -lisode
144 # Freely available ISODE 8.0 release build settings (uncomment the next 4 lines)
145 #ISODEPACKAGE=-DISODEPACKAGE
146 #ISODEINCLUDEFLAG= -I/usr/local/isode/include
147 #ISODELIBFLAG = -L/usr/local/isode/lib
148 #ISODEBASELIBS = -ldsap -lisode
150 # NEXOR ISODE release build settings (uncomment the next 4 lines)
151 #ISODEPACKAGE=-DISODEPACKAGE=XT
152 #ISODEINCLUDEFLAG= -I/usr/include/isode
153 #ISODELIBFLAG = -L/usr/local/lib -L/usr/sunlink/osi/lib
154 #ISODEBASELIBS = -lxtpp -lresolv -lxtdsap -lxtisode -losi
156 #############################################################################
157 ## If you don't want to run slapd, skip this section. ##
158 #############################################################################
160 # To build slapd (the stand-alone ldap daemon), uncomment the MAKESLAPD
161 # line and select the SLAPD_BACKENDS you want to use. If you enable the
162 # LDBM backend, also select one of the LDBM backends.
165 # remove the defines for backends you don't want to enable
166 SLAPD_BACKENDS= -DLDAP_LDBM -DLDAP_SHELL -DLDAP_PASSWD
168 # If you have included -DLDAP_LDBM in the SLAPD_BACKENDS line,
169 # which low-level database package to use must be specified. You
170 # may want to overide the platform settings by disabling the lines
171 # below and hardcoding the desired settings.
173 # The four choices: Berkeley db b-tree, Berkeley db hash, GNU dbm, or ndbm.
174 # You will also need to edit the include and lib strings appropriately.
177 # Fallback settings, defaults are set in build/*/Make-platform
178 # The NDBM interface may not work on some (any) platforms.
179 # You may be happier with Berkeley DB B-trees.
181 LDBMBACKEND=-DLDBM_USE_NDBM
190 # LDBM Hardcode Setting Examples (may require editing)
191 # berkeley db btree package
193 #LDBMBACKEND=-DLDBM_USE_DBBTREE
194 #LDBMINCLUDE=-I/usr/local/db/include
196 # berkeley db hash package
197 #LDBMBACKEND=-DLDBM_USE_DBHASH
198 #LDBMINCLUDE=-I/usr/local/db/include
201 #LDBMBACKEND=-DLDBM_USE_GDBM
202 #LDBMINCLUDE=-I/usr/local/gdbm/include
205 #undef these if you have SleepyCat DB2 installed the updated DBI
206 #LDBMBACKEND=-DLDBM_USE_DBBTREE -DLDBM_USE_DB2
207 #LDBMINCLUDE=-I/usr/local/include
208 #LDBMLIB=-L/usr/local/lib -ldb
210 #undef these if you have SleepyCat DB2 installed (with compat185)
211 #LDBMBACKEND=-DLDBM_USE_DBBTREE -DLDBM_USE_DB2_COMPAT185
212 #LDBMINCLUDE=-I/usr/local/include
213 #LDBMLIB=-L/usr/local/lib -ldb
215 # if you want to use a non-default threads package change the defines below
217 # -DPOSIX_THREADS (draft 10 or standard)
218 # -DTHREAD_MIT_PTHREADS (draft 4)
219 # -DTHREAD_NEXT_CTHREADS
220 # -DTHREAD_DCE_PTHREADS
221 # -DTHREAD_SUNOS4_LWP
222 # -DTHREAD_SUNOS5_LWP
223 # and select the appropriate library.
232 # Locations of auxilary programs
233 # (excepts to below are generally defined in Make-platform)
235 LDAP_SENDMAIL=/usr/lib/sendmail
238 LDAP_EDITOR=/usr/ucb/vi
241 LDAP_FINGER=/usr/ucb/finger
244 # For generation of compressed man pages
245 # (excepts to below are generally defined in Make-platform)
249 ifndef MANCOMPRESSSUFFIX
253 #############################################################################
254 ## The following options are used by the xax500 client. If you haven't ##
255 ## retrieved the xax500 source and dropped it into the "clients" ##
256 ## directory, you can skip this section. ##
257 #############################################################################
259 # location of your X include files
260 #XINCLUDES= -I/usr/X11/include
262 # location of your X libraries
263 #XLIBDIRS=-L/usr/X11/lib
265 # include any extra X libraries you need here
266 # the following works with sunos 4 and X11R5
267 #XLIBS = $(XLIBDIRS) -lXm -lXt -lX11
268 # the following has been known to work with Solaris 2.4 and X11R6
269 #XLIBS = $(XLIBDIRS) -lXm -lXext -lSM -lICE -lXpm -lXt -lX11
271 #############################################################################
272 ## If you don't want to do auto-translation of character sets, skip this ##
273 #############################################################################
275 # Otherwise, uncomment this line and set the following options.
276 #STR_TRANSLATION=-DSTR_TRANSLATION
278 # remove the defines for LDAP client library T.61 character translation
279 # you do not need. If you use LDAP_CHARSET_8859, replace the '1' in "88591"
280 # with the number of the particular character set you use. E.g., use "88594"
281 # if you use the ISO 8859-4 chracter set.
282 #LIBLDAP_CHARSETS=-DLDAP_CHARSET_8859="88591"
284 # uncomment one these lines to enable automatic T.61 translation by default
285 #LIBLDAP_DEF_CHARSET=-DLDAP_DEFAULT_CHARSET=LDAP_CHARSET_8859
287 #############################################################################
288 ## General options ##
289 #############################################################################
290 # uncomment this line to enable debugging code (a good idea)
291 LDAP_DEBUG=-DLDAP_DEBUG
293 # uncomment this line to turn on a few U of Michigan specific things
296 # uncomment this line to delete a few printfs in the lber and ldap libraries.
297 #NO_USERINTERFACE=-DNO_USERINTERFACE
299 # uncomment this line to include Connectionless LDAP support
302 # uncomment this line to eliminate local caching support in the libldap
305 # uncomment this line to do reverse lookups (useful for doing ACLs
306 # by host/domain names)
307 LDAP_REVERSE_LOOKUP=-DREVERSE_LOOKUP
309 # uncomment this line to enable support for LDAP referrals in libldap
310 LDAP_REFERRALS=-DLDAP_REFERRALS
312 # uncomment this line to enable ACL by groups
313 # LDAP_ACLGROUP=-DACLGROUP
315 # uncomment these lines to enable support for CRYPT, SHA1, and/or MD5 passwords
316 # in LDBM. Crypt uses platform provided crypt(3).
317 # LDAP_CRYPT=-DLDAP_CRYPT -DLDAP_SHA1 -DLDAP_MD5
319 # and comment this line out
322 # uncomment these lines to enable support fro tcp_wrappers in servers.
323 # Requires tcp_wrappers.
324 # LDAP_TCP_WRAPPERS=-DTCP_WRAPPERS -I/usr/local/include
325 # LDAP_TCP_WRAPPERS_LIB=-L/usr/local/lib -lwrap
327 # uncomment this line to use soundex for approximate matches in slapd.
328 # the default is to use the metaphone algorithm.