2 # (C) Copyright 2000-2013
3 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
5 # SPDX-License-Identifier: GPL-2.0+
15 # To see a list of typical targets execute "make help"
16 # More info can be located in ./README
17 # Comments in this file are targeted only to the developer, do not
18 # expect to learn how to build the kernel reading this file.
21 # o use make's built-in rules and variables
22 # (this increases performance and avoids hard-to-debug behaviour);
23 # o print "Entering directory ...";
24 MAKEFLAGS += -rR --no-print-directory
26 # Avoid funny character set dependencies
30 export LC_COLLATE LC_NUMERIC
32 # We are using a recursive build, so we need to do a little thinking
33 # to get the ordering right.
35 # Most importantly: sub-Makefiles should only ever modify files in
36 # their own directory. If in some directory we have a dependency on
37 # a file in another dir (which doesn't happen often, but it's often
38 # unavoidable when linking the built-in.o targets which finally
39 # turn into vmlinux), we will call a sub make in that other dir, and
40 # after that we are sure that everything which is in that other dir
43 # The only cases where we need to modify files which have global
44 # effects are thus separated out and done before the recursive
45 # descending is started. They are now explicitly listed as the
48 # To put more focus on warnings, be less verbose as default
49 # Use 'make V=1' to see the full commands
51 ifeq ("$(origin V)", "command line")
58 # Call a source code checker (by default, "sparse") as part of the
61 # Use 'make C=1' to enable checking of only re-compiled files.
62 # Use 'make C=2' to enable checking of *all* source files, regardless
63 # of whether they are re-compiled or not.
65 # See the file "Documentation/sparse.txt" for more details, including
66 # where to get the "sparse" utility.
68 ifeq ("$(origin C)", "command line")
69 KBUILD_CHECKSRC = $(C)
71 ifndef KBUILD_CHECKSRC
75 # Use make M=dir to specify directory of external module to build
76 # Old syntax make ... SUBDIRS=$PWD is still supported
77 # Setting the environment variable KBUILD_EXTMOD take precedence
79 KBUILD_EXTMOD ?= $(SUBDIRS)
82 ifeq ("$(origin M)", "command line")
86 # kbuild supports saving output files in a separate directory.
87 # To locate output files in a separate directory two syntaxes are supported.
88 # In both cases the working directory must be the root of the kernel src.
90 # Use "make O=dir/to/store/output/files/"
92 # 2) Set KBUILD_OUTPUT
93 # Set the environment variable KBUILD_OUTPUT to point to the directory
94 # where the output files shall be placed.
95 # export KBUILD_OUTPUT=dir/to/store/output/files/
98 # The O= assignment takes precedence over the KBUILD_OUTPUT environment
102 # KBUILD_SRC is set on invocation of make in OBJ directory
103 # KBUILD_SRC is not intended to be used by the regular user (for now)
104 ifeq ($(KBUILD_SRC),)
106 # OK, Make called in directory where kernel src resides
107 # Do we want to locate output files in a separate directory?
108 ifeq ("$(origin O)", "command line")
109 KBUILD_OUTPUT := $(O)
112 ifeq ("$(origin W)", "command line")
113 export KBUILD_ENABLE_EXTRA_GCC_CHECKS := $(W)
116 # That's our default target when none is given on the command line
120 # Cancel implicit rules on top Makefile
121 $(CURDIR)/Makefile Makefile: ;
123 ifneq ($(KBUILD_OUTPUT),)
124 # Invoke a second make in the output directory, passing relevant variables
125 # check that the output directory actually exists
126 saved-output := $(KBUILD_OUTPUT)
127 KBUILD_OUTPUT := $(shell cd $(KBUILD_OUTPUT) && /bin/pwd)
128 $(if $(KBUILD_OUTPUT),, \
129 $(error output directory "$(saved-output)" does not exist))
131 PHONY += $(MAKECMDGOALS) sub-make
133 $(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make
137 $(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \
138 KBUILD_SRC=$(CURDIR) \
139 KBUILD_EXTMOD="$(KBUILD_EXTMOD)" -f $(CURDIR)/Makefile \
140 $(filter-out _all sub-make,$(MAKECMDGOALS))
142 # Leave processing to above invocation of make
144 endif # ifneq ($(KBUILD_OUTPUT),)
145 endif # ifeq ($(KBUILD_SRC),)
147 # We process the rest of the Makefile if this is the final invocation of make
148 ifeq ($(skip-makefile),)
150 # If building an external module we do not care about the all: rule
151 # but instead _all depend on modules
153 ifeq ($(KBUILD_EXTMOD),)
159 srctree := $(if $(KBUILD_SRC),$(KBUILD_SRC),$(CURDIR))
164 VPATH := $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD))
166 export srctree objtree VPATH
168 OBJTREE := $(objtree)
169 SPLTREE := $(OBJTREE)/spl
170 TPLTREE := $(OBJTREE)/tpl
171 export OBJTREE SPLTREE TPLTREE
173 MKCONFIG := $(srctree)/mkconfig
176 # Make sure CDPATH settings don't interfere
179 #########################################################################
181 HOSTARCH := $(shell uname -m | \
183 -e s/sun4u/sparc64/ \
186 -e s/ppc64/powerpc/ \
188 -e s/macppc/powerpc/\
191 HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
192 sed -e 's/\(cygwin\).*/cygwin/')
194 export HOSTARCH HOSTOS
196 # Deal with colliding definitions from tcsh etc.
199 #########################################################################
201 # set default to nothing for native builds
202 ifeq ($(HOSTARCH),$(ARCH))
206 # SHELL used by kbuild
207 CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
208 else if [ -x /bin/bash ]; then echo /bin/bash; \
209 else echo sh; fi ; fi)
212 HOSTCFLAGS = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer
214 ifeq ($(HOSTOS),cygwin)
218 # Mac OS X / Darwin's C preprocessor is Apple specific. It
219 # generates numerous errors and warnings. We want to bypass it
220 # and use GNU C's cpp. To do this we pass the -traditional-cpp
221 # option to the compiler. Note that the -traditional-cpp flag
222 # DOES NOT have the same semantics as GNU C's flag, all it does
223 # is invoke the GNU preprocessor in stock ANSI/ISO C fashion.
225 # Apple's linker is similar, thanks to the new 2 stage linking
226 # multiple symbol definitions are treated as errors, hence the
227 # -multiply_defined suppress option to turn off this error.
229 ifeq ($(HOSTOS),darwin)
230 # get major and minor product version (e.g. '10' and '6' for Snow Leopard)
231 DARWIN_MAJOR_VERSION = $(shell sw_vers -productVersion | cut -f 1 -d '.')
232 DARWIN_MINOR_VERSION = $(shell sw_vers -productVersion | cut -f 2 -d '.')
234 os_x_before = $(shell if [ $(DARWIN_MAJOR_VERSION) -le $(1) -a \
235 $(DARWIN_MINOR_VERSION) -le $(2) ] ; then echo "$(3)"; else echo "$(4)"; fi ;)
237 # Snow Leopards build environment has no longer restrictions as described above
238 HOSTCC = $(call os_x_before, 10, 5, "cc", "gcc")
239 HOSTCFLAGS += $(call os_x_before, 10, 4, "-traditional-cpp")
240 HOSTLDFLAGS += $(call os_x_before, 10, 5, "-multiply_defined suppress")
243 # Decide whether to build built-in, modular, or both.
244 # Normally, just do built-in.
249 # If we have only "make modules", don't compile built-in objects.
250 # When we're building modules with modversions, we need to consider
251 # the built-in objects during the descend as well, in order to
252 # make sure the checksums are up to date before we record them.
254 ifeq ($(MAKECMDGOALS),modules)
255 KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1)
258 # If we have "make <whatever> modules", compile modules
259 # in addition to whatever we do anyway.
260 # Just "make" or "make all" shall build modules as well
262 # U-Boot does not need modules
263 #ifneq ($(filter all _all modules,$(MAKECMDGOALS)),)
264 # KBUILD_MODULES := 1
267 #ifeq ($(MAKECMDGOALS),)
268 # KBUILD_MODULES := 1
271 export KBUILD_MODULES KBUILD_BUILTIN
272 export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
275 # ---------------------------------------------------------------------------
277 # Normally, we echo the whole command before executing it. By making
278 # that echo $($(quiet)$(cmd)), we now have the possibility to set
279 # $(quiet) to choose other forms of output instead, e.g.
281 # quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
282 # cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
284 # If $(quiet) is empty, the whole command will be printed.
285 # If it is set to "quiet_", only the short version will be printed.
286 # If it is set to "silent_", nothing will be printed at all, since
287 # the variable $(silent_cmd_cc_o_c) doesn't exist.
289 # A simple variant is to prefix commands with $(Q) - that's useful
290 # for commands that shall be hidden in non-verbose mode.
294 # If KBUILD_VERBOSE equals 0 then the above command will be hidden.
295 # If KBUILD_VERBOSE equals 1 then the above command is displayed.
297 ifeq ($(KBUILD_VERBOSE),1)
305 # If the user is running make -s (silent mode), suppress echoing of
308 ifneq ($(filter s% -s%,$(MAKEFLAGS)),)
312 export quiet Q KBUILD_VERBOSE
315 # Look for make include files relative to root of kernel src
316 MAKEFLAGS += --include-dir=$(srctree)
318 # We need some generic definitions (do not try to remake the file).
319 $(srctree)/scripts/Kbuild.include: ;
320 include $(srctree)/scripts/Kbuild.include
322 # Make variables (CC, etc...)
324 AS = $(CROSS_COMPILE)as
326 ifneq ($(shell $(CROSS_COMPILE)ld.bfd -v 2> /dev/null),)
327 LD = $(CROSS_COMPILE)ld.bfd
329 LD = $(CROSS_COMPILE)ld
331 CC = $(CROSS_COMPILE)gcc
333 AR = $(CROSS_COMPILE)ar
334 NM = $(CROSS_COMPILE)nm
335 LDR = $(CROSS_COMPILE)ldr
336 STRIP = $(CROSS_COMPILE)strip
337 OBJCOPY = $(CROSS_COMPILE)objcopy
338 OBJDUMP = $(CROSS_COMPILE)objdump
340 RANLIB = $(CROSS_COMPILE)RANLIB
344 CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \
345 -Wbitwise -Wno-return-void -D__CHECK_ENDIAN__ $(CF)
347 KBUILD_CPPFLAGS := -D__KERNEL__
349 KBUILD_CFLAGS := -Wall -Wstrict-prototypes \
350 -Wno-format-security \
351 -fno-builtin -ffreestanding
352 KBUILD_AFLAGS := -D__ASSEMBLY__
354 # Read UBOOTRELEASE from include/config/uboot.release (if it exists)
355 UBOOTRELEASE = $(shell cat include/config/uboot.release 2> /dev/null)
356 UBOOTVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
358 export VERSION PATCHLEVEL SUBLEVEL UBOOTRELEASE UBOOTVERSION
359 export ARCH CPU BOARD VENDOR SOC CPUDIR BOARDDIR
360 export CONFIG_SHELL HOSTCC HOSTCFLAGS HOSTLDFLAGS CROSS_COMPILE AS LD CC
361 export CPP AR NM LDR STRIP OBJCOPY OBJDUMP
363 export DTC CHECK CHECKFLAGS
365 export KBUILD_CPPFLAGS NOSTDINC_FLAGS UBOOTINCLUDE OBJCOPYFLAGS LDFLAGS
366 export KBUILD_CFLAGS KBUILD_AFLAGS
368 # When compiling out-of-tree modules, put MODVERDIR in the module
369 # tree rather than in the kernel tree. The kernel tree might
371 export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions
373 # Files to ignore in find ... statements
375 RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS \
376 -o -name .pc -o -name .hg -o -name .git \) -prune -o
377 export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn \
378 --exclude CVS --exclude .pc --exclude .hg --exclude .git
380 # ===========================================================================
381 # Rules shared between *config targets and build targets
383 # Basic helpers built in scripts/
384 PHONY += scripts_basic
386 $(Q)$(MAKE) $(build)=scripts/basic
387 $(Q)rm -f .tmp_quiet_recordmcount
389 # To avoid any implicit rule to kick in, define an empty command.
390 scripts/basic/%: scripts_basic ;
392 PHONY += outputmakefile
393 # outputmakefile generates a Makefile in the output directory, if using a
394 # separate output directory. This allows convenient use of make in the
397 ifneq ($(KBUILD_SRC),)
398 $(Q)ln -fsn $(srctree) source
399 $(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \
400 $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL)
403 # To make sure we do not include .config for any of the *config targets
404 # catch them early, and hand them over to scripts/kconfig/Makefile
405 # It is allowed to specify more targets when calling make, including
406 # mixing *config targets and build targets.
407 # For example 'make oldconfig all'.
408 # Detect when mixed targets is specified, and make a second invocation
409 # of make so .config is not included in this case either (for *config).
411 version_h := include/generated/version_autogenerated.h
412 timestamp_h := include/generated/timestamp_autogenerated.h
414 no-dot-config-targets := clean clobber mrproper distclean \
415 help %docs check% coccicheck \
422 ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),)
423 ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
428 ifeq ($(KBUILD_EXTMOD),)
429 ifneq ($(filter config %config,$(MAKECMDGOALS)),)
431 ifneq ($(filter-out config %config,$(MAKECMDGOALS)),)
437 ifeq ($(mixed-targets),1)
438 # ===========================================================================
439 # We're called with mixed targets (*config and build targets).
440 # Handle them one by one.
442 PHONY += $(MAKECMDGOALS) build-one-by-one
444 $(MAKECMDGOALS): build-one-by-one
449 for i in $(MAKECMDGOALS); do \
450 $(MAKE) -f $(srctree)/Makefile $$i; \
454 ifeq ($(config-targets),1)
455 # ===========================================================================
456 # *config targets only - make sure prerequisites are updated, and descend
457 # in scripts/kconfig to make the *config target
459 # Read arch specific Makefile to set KBUILD_DEFCONFIG as needed.
460 # KBUILD_DEFCONFIG may point out an alternative default configuration
461 # used for 'make defconfig'
463 %_config:: outputmakefile
464 @$(MKCONFIG) -A $(@:_config=)
467 # ===========================================================================
468 # Build targets only - this includes vmlinux, arch specific targets, clean
469 # targets and others. In general all targets except *config targets.
471 # load ARCH, BOARD, and CPU configuration
472 -include include/config.mk
474 ifeq ($(dot-config),1)
476 -include include/autoconf.mk
477 -include include/autoconf.mk.dep
479 # load other configuration
480 include $(srctree)/config.mk
482 ifeq ($(wildcard include/config.mk),)
483 $(error "System not configured - see README")
486 # If board code explicitly specified LDSCRIPT or CONFIG_SYS_LDSCRIPT, use
487 # that (or fail if absent). Otherwise, search for a linker script in a
491 #LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds.debug
492 ifdef CONFIG_SYS_LDSCRIPT
493 # need to strip off double quotes
494 LDSCRIPT := $(srctree)/$(CONFIG_SYS_LDSCRIPT:"%"=%)
498 # If there is no specified link script, we look in a number of places for it
500 ifeq ($(CONFIG_NAND_U_BOOT),y)
501 LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot-nand.lds
502 ifeq ($(wildcard $(LDSCRIPT)),)
503 LDSCRIPT := $(srctree)/$(CPUDIR)/u-boot-nand.lds
506 ifeq ($(wildcard $(LDSCRIPT)),)
507 LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds
509 ifeq ($(wildcard $(LDSCRIPT)),)
510 LDSCRIPT := $(srctree)/$(CPUDIR)/u-boot.lds
512 ifeq ($(wildcard $(LDSCRIPT)),)
513 LDSCRIPT := $(srctree)/arch/$(ARCH)/cpu/u-boot.lds
520 endif # $(dot-config)
522 KBUILD_CFLAGS += -Os #-fomit-frame-pointer
525 KBUILD_CFLAGS += -DBUILD_TAG='"$(BUILD_TAG)"'
528 KBUILD_CFLAGS += $(call cc-option,-fno-stack-protector)
531 # $(KBUILD_AFLAGS) sets -g, which causes gcc to pass a suitable -g<format>
532 # option to the assembler.
535 # Report stack usage if supported
536 ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-stack-usage.sh $(CC)),y)
537 KBUILD_CFLAGS += -fstack-usage
540 KBUILD_CFLAGS += $(call cc-option,-Wno-format-nonliteral)
542 # turn jbsr into jsr for m68k
544 ifeq ($(findstring 3.4,$(shell $(CC) --version)),3.4)
545 KBUILD_AFLAGS += -Wa,-gstabs,-S
549 ifneq ($(CONFIG_SYS_TEXT_BASE),)
550 KBUILD_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE)
553 export CONFIG_SYS_TEXT_BASE
555 # Use UBOOTINCLUDE when you must reference the include/ directory.
556 # Needed to be compatible with the O= option
559 $(if $(KBUILD_SRC), -I$(srctree)/include) \
560 -I$(srctree)/arch/$(ARCH)/include
562 NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
563 CHECKFLAGS += $(NOSTDINC_FLAGS)
566 cpp_flags := $(KBUILD_CPPFLAGS) $(PLATFORM_CPPFLAGS) $(UBOOTINCLUDE) \
568 c_flags := $(KBUILD_CFLAGS) $(cpp_flags)
570 #########################################################################
571 # U-Boot objects....order is important (i.e. start must be first)
573 head-y := $(CPUDIR)/start.o
574 head-$(CONFIG_4xx) += arch/powerpc/cpu/ppc4xx/resetvec.o
575 head-$(CONFIG_MPC85xx) += arch/powerpc/cpu/mpc85xx/resetvec.o
577 HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makefile),y,n)
580 libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/
583 libs-y += $(CPUDIR)/$(SOC)/
585 libs-$(CONFIG_OF_EMBED) += dts/
586 libs-y += arch/$(ARCH)/lib/
591 libs-$(CONFIG_DM) += drivers/core/
592 libs-y += drivers/dma/
593 libs-y += drivers/gpio/
594 libs-y += drivers/i2c/
595 libs-y += drivers/input/
596 libs-y += drivers/mmc/
597 libs-y += drivers/mtd/
598 libs-$(CONFIG_CMD_NAND) += drivers/mtd/nand/
599 libs-y += drivers/mtd/onenand/
600 libs-$(CONFIG_CMD_UBI) += drivers/mtd/ubi/
601 libs-y += drivers/mtd/spi/
602 libs-y += drivers/net/
603 libs-y += drivers/net/phy/
604 libs-y += drivers/pci/
605 libs-y += drivers/power/ \
606 drivers/power/fuel_gauge/ \
608 drivers/power/pmic/ \
609 drivers/power/battery/
610 libs-y += drivers/spi/
611 libs-$(CONFIG_FMAN_ENET) += drivers/net/fm/
612 libs-$(CONFIG_SYS_FSL_DDR) += drivers/ddr/fsl/
613 libs-y += drivers/serial/
614 libs-y += drivers/usb/eth/
615 libs-y += drivers/usb/gadget/
616 libs-y += drivers/usb/host/
617 libs-y += drivers/usb/musb/
618 libs-y += drivers/usb/musb-new/
619 libs-y += drivers/usb/phy/
620 libs-y += drivers/usb/ulpi/
622 libs-y += lib/libfdt/
623 libs-$(CONFIG_API) += api/
624 libs-$(CONFIG_HAS_POST) += post/
627 libs-$(CONFIG_DM_DEMO) += drivers/demo/
629 ifneq (,$(filter $(SOC), mx25 mx27 mx5 mx6 mx31 mx35 mxs vf610))
630 libs-y += arch/$(ARCH)/imx-common/
633 libs-$(CONFIG_ARM) += arch/arm/cpu/
634 libs-$(CONFIG_PPC) += arch/powerpc/cpu/
636 libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/)
638 libs-y := $(sort $(libs-y))
640 u-boot-dirs := $(patsubst %/,%,$(filter %/, $(libs-y))) tools examples
642 u-boot-alldirs := $(sort $(u-boot-dirs) $(patsubst %/,%,$(filter %/, $(libs-))))
644 libs-y := $(patsubst %/, %/built-in.o, $(libs-y))
646 u-boot-init := $(head-y)
647 u-boot-main := $(libs-y)
651 ifdef CONFIG_USE_PRIVATE_LIBGCC
652 ifeq ($(CONFIG_USE_PRIVATE_LIBGCC),y)
653 PLATFORM_LIBGCC = arch/$(ARCH)/lib/lib.a
655 PLATFORM_LIBGCC = -L $(CONFIG_USE_PRIVATE_LIBGCC) -lgcc
658 PLATFORM_LIBGCC := -L $(shell dirname `$(CC) $(c_flags) -print-libgcc-file-name`) -lgcc
660 PLATFORM_LIBS += $(PLATFORM_LIBGCC)
663 # Special flags for CPP when processing the linker script.
664 # Pass the version down so we can handle backwards compatibility
667 -include $(srctree)/include/u-boot/u-boot.lds.h \
669 $(shell $(LD) --version | \
670 sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
672 #########################################################################
673 #########################################################################
675 ifneq ($(CONFIG_BOARD_SIZE_LIMIT),)
677 @actual=`wc -c $@ | awk '{print $$1}'`; \
678 limit=`printf "%d" $(CONFIG_BOARD_SIZE_LIMIT)`; \
679 if test $$actual -gt $$limit; then \
680 echo "$@ exceeds file size limit:" >&2 ; \
681 echo " limit: $$limit bytes" >&2 ; \
682 echo " actual: $$actual bytes" >&2 ; \
683 echo " excess: $$((actual - limit)) bytes" >&2; \
690 # Statically apply RELA-style relocations (currently arm64 only)
691 ifneq ($(CONFIG_STATIC_RELA),)
692 # $(1) is u-boot ELF, $(2) is u-boot bin, $(3) is text base
694 start=$$($(NM) $(1) | grep __rel_dyn_start | cut -f 1 -d ' '); \
695 end=$$($(NM) $(1) | grep __rel_dyn_end | cut -f 1 -d ' '); \
696 tools/relocate-rela $(2) $(3) $$start $$end
701 # Always append ALL so that arch config.mk's can add custom ones
702 ALL-y += u-boot.srec u-boot.bin System.map
704 ALL-$(CONFIG_NAND_U_BOOT) += u-boot-nand.bin
705 ALL-$(CONFIG_ONENAND_U_BOOT) += u-boot-onenand.bin
706 ALL-$(CONFIG_RAMBOOT_PBL) += u-boot.pbl
707 ALL-$(CONFIG_SPL) += spl/u-boot-spl.bin
708 ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot.img
709 ALL-$(CONFIG_TPL) += tpl/u-boot-tpl.bin
710 ALL-$(CONFIG_OF_SEPARATE) += u-boot.dtb u-boot-dtb.bin
711 ALL-$(CONFIG_OF_HOSTFILE) += u-boot.dtb
712 ifneq ($(CONFIG_SPL_TARGET),)
713 ALL-$(CONFIG_SPL) += $(CONFIG_SPL_TARGET:"%"=%)
715 ALL-$(CONFIG_REMAKE_ELF) += u-boot.elf
717 # enable combined SPL/u-boot/dtb rules for tegra
718 ifneq ($(CONFIG_TEGRA),)
719 ifeq ($(CONFIG_SPL),y)
720 ifeq ($(CONFIG_OF_SEPARATE),y)
721 ALL-y += u-boot-dtb-tegra.bin
723 ALL-y += u-boot-nodtb-tegra.bin
728 LDFLAGS_u-boot += $(LDFLAGS_FINAL)
729 ifneq ($(CONFIG_SYS_TEXT_BASE),)
730 LDFLAGS_u-boot += -Ttext $(CONFIG_SYS_TEXT_BASE)
733 quiet_cmd_objcopy = OBJCOPY $@
734 cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
736 quiet_cmd_mkimage = UIMAGE $@
737 cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
738 $(if $(KBUILD_VERBOSE:1=), >/dev/null)
740 quiet_cmd_cat = CAT $@
741 cmd_cat = cat $(filter-out $(PHONY), $^) > $@
743 append = cat $(filter-out $< $(PHONY), $^) >> $@
745 quiet_cmd_pad_cat = CAT $@
746 cmd_pad_cat = $(cmd_objcopy) && $(append) || rm -f $@
751 dtbs dts/dt.dtb: checkdtc u-boot
752 $(Q)$(MAKE) $(build)=dts dtbs
754 u-boot-dtb.bin: u-boot.bin dts/dt.dtb FORCE
755 $(call if_changed,cat)
757 quiet_cmd_copy = COPY $@
760 u-boot.dtb: dts/dt.dtb
763 OBJCOPYFLAGS_u-boot.hex := -O ihex
765 OBJCOPYFLAGS_u-boot.srec := -O srec
767 u-boot.hex u-boot.srec: u-boot FORCE
768 $(call if_changed,objcopy)
770 OBJCOPYFLAGS_u-boot.bin := -O binary
772 u-boot.bin: u-boot FORCE
773 $(call if_changed,objcopy)
774 $(call DO_STATIC_RELA,$<,$@,$(CONFIG_SYS_TEXT_BASE))
779 $(LDR) -T $(CONFIG_BFIN_CPU) -c $@ $< $(LDR_FLAGS)
782 OBJCOPYFLAGS_u-boot.ldr.hex := -I binary -O ihex
784 OBJCOPYFLAGS_u-boot.ldr.srec := -I binary -O srec
786 u-boot.ldr.hex u-boot.ldr.srec: u-boot.ldr FORCE
787 $(call if_changed,objcopy)
790 # U-Boot entry point, needed for booting of full-blown U-Boot
791 # from the SPL U-Boot version.
793 ifndef CONFIG_SYS_UBOOT_START
794 CONFIG_SYS_UBOOT_START := 0
797 MKIMAGEFLAGS_u-boot.img = -A $(ARCH) -T firmware -C none -O u-boot \
798 -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
799 -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
801 MKIMAGEFLAGS_u-boot.kwb = -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) \
802 -T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE)
804 MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
805 -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage
807 u-boot.img u-boot.kwb u-boot.pbl: u-boot.bin FORCE
808 $(call if_changed,mkimage)
810 u-boot.imx: u-boot.bin
811 $(Q)$(MAKE) $(build)=arch/arm/imx-common $@
813 u-boot.sha1: u-boot.bin
814 tools/ubsha1 u-boot.bin
817 $(OBJDUMP) -d $< > $@
820 SPL_PAYLOAD := tpl/u-boot-with-tpl.bin
822 SPL_PAYLOAD := u-boot.bin
825 OBJCOPYFLAGS_u-boot-with-spl.bin = -I binary -O binary \
826 --pad-to=$(CONFIG_SPL_PAD_TO)
827 u-boot-with-spl.bin: spl/u-boot-spl.bin $(SPL_PAYLOAD) FORCE
828 $(call if_changed,pad_cat)
830 OBJCOPYFLAGS_u-boot-with-tpl.bin = -I binary -O binary \
831 --pad-to=$(CONFIG_TPL_PAD_TO)
832 tpl/u-boot-with-tpl.bin: tpl/u-boot-tpl.bin u-boot.bin FORCE
833 $(call if_changed,pad_cat)
835 SPL: spl/u-boot-spl.bin FORCE
836 $(Q)$(MAKE) $(build)=arch/arm/imx-common $@
838 u-boot-with-spl.imx u-boot-with-nand-spl.imx: SPL u-boot.bin FORCE
839 $(Q)$(MAKE) $(build)=arch/arm/imx-common $@
841 MKIMAGEFLAGS_u-boot.ubl = -n $(UBL_CONFIG) -T ublimage -e $(CONFIG_SYS_TEXT_BASE)
843 u-boot.ubl: u-boot-with-spl.bin FORCE
844 $(call if_changed,mkimage)
846 MKIMAGEFLAGS_u-boot-spl.ais = -s -n $(if $(CONFIG_AIS_CONFIG_FILE), \
847 $(srctree)/$(CONFIG_AIS_CONFIG_FILE:"%"=%),"/dev/null") \
848 -T aisimage -e $(CONFIG_SPL_TEXT_BASE)
849 spl/u-boot-spl.ais: spl/u-boot-spl.bin FORCE
850 $(call if_changed,mkimage)
852 OBJCOPYFLAGS_u-boot.ais = -I binary -O binary --pad-to=$(CONFIG_SPL_MAX_SIZE)
853 u-boot.ais: spl/u-boot-spl.ais u-boot.img FORCE
854 $(call if_changed,pad_cat)
856 u-boot.sb: u-boot.bin spl/u-boot-spl.bin
857 $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot.sb
859 # On x600 (SPEAr600) U-Boot is appended to U-Boot SPL.
860 # Both images are created using mkimage (crc etc), so that the ROM
861 # bootloader can check its integrity. Padding needs to be done to the
862 # SPL image (with mkimage header) and not the binary. Otherwise the resulting image
863 # which is loaded/copied by the ROM bootloader to SRAM doesn't fit.
864 # The resulting image containing both U-Boot images is called u-boot.spr
865 MKIMAGEFLAGS_u-boot-spl.img = -A $(ARCH) -T firmware -C none \
866 -a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE) -n XLOADER
867 spl/u-boot-spl.img: spl/u-boot-spl.bin FORCE
868 $(call if_changed,mkimage)
870 OBJCOPYFLAGS_u-boot.spr = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
872 u-boot.spr: spl/u-boot-spl.img u-boot.img FORCE
873 $(call if_changed,pad_cat)
875 ifneq ($(CONFIG_TEGRA),)
876 OBJCOPYFLAGS_u-boot-nodtb-tegra.bin = -O binary --pad-to=$(CONFIG_SYS_TEXT_BASE)
877 u-boot-nodtb-tegra.bin: spl/u-boot-spl u-boot.bin FORCE
878 $(call if_changed,pad_cat)
880 ifeq ($(CONFIG_OF_SEPARATE),y)
881 u-boot-dtb-tegra.bin: u-boot-nodtb-tegra.bin dts/dt.dtb FORCE
882 $(call if_changed,cat)
886 u-boot-img.bin: spl/u-boot-spl.bin u-boot.img FORCE
887 $(call if_changed,cat)
889 # PPC4xx needs the SPL at the end of the image, since the reset vector
890 # is located at 0xfffffffc. So we can't use the "u-boot-img.bin" target
891 # and need to introduce a new build target with the full blown U-Boot
892 # at the start padded up to the start of the SPL image. And then concat
893 # the SPL image to the end.
895 OBJCOPYFLAGS_u-boot-img-spl-at-end.bin := -I binary -O binary \
896 --pad-to=$(CONFIG_UBOOT_PAD_TO) --gap-fill=0xff
897 u-boot-img-spl-at-end.bin: u-boot.img spl/u-boot-spl.bin FORCE
898 $(call if_changed,pad_cat)
900 # Create a new ELF from a raw binary file. This is useful for arm64
901 # where static relocation needs to be performed on the raw binary,
902 # but certain simulators only accept an ELF file (but don't do the
904 # FIXME refactor dts/Makefile to share target/arch detection
905 u-boot.elf: u-boot.bin
906 @$(OBJCOPY) -B aarch64 -I binary -O elf64-littleaarch64 \
908 @$(LD) u-boot-elf.o -o $@ \
909 --defsym=_start=$(CONFIG_SYS_TEXT_BASE) \
910 -Ttext=$(CONFIG_SYS_TEXT_BASE)
912 # Rule to link u-boot
913 # May be overridden by arch/$(ARCH)/config.mk
914 quiet_cmd_u-boot__ ?= LD $@
915 cmd_u-boot__ ?= $(LD) $(LDFLAGS) $(LDFLAGS_u-boot) -o $@ \
916 -T u-boot.lds $(u-boot-init) \
917 --start-group $(u-boot-main) --end-group \
918 $(PLATFORM_LIBS) -Map u-boot.map
920 u-boot: $(u-boot-init) $(u-boot-main) u-boot.lds
921 $(call if_changed,u-boot__)
922 ifeq ($(CONFIG_KALLSYMS),y)
923 smap=`$(call SYSTEM_MAP,u-boot) | \
924 awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \
925 $(CC) $(c_flags) -DSYSTEM_MAP="\"$${smap}\"" \
926 -c $(srctree)/common/system_map.c -o common/system_map.o
927 $(call cmd,u-boot__) common/system_map.o
930 # The actual objects are generated when descending,
931 # make sure no implicit rule kicks in
932 $(sort $(u-boot-init) $(u-boot-main)): $(u-boot-dirs) ;
934 # Handle descending into subdirectories listed in $(vmlinux-dirs)
935 # Preset locale variables to speed up the build process. Limit locale
936 # tweaks to this spot to avoid wrong language settings when running
937 # make menuconfig etc.
938 # Error messages still appears in the original language
940 PHONY += $(u-boot-dirs)
941 $(u-boot-dirs): prepare scripts
942 $(Q)$(MAKE) $(build)=$@
945 # The "tools" are needed early
946 $(filter-out tools, $(u-boot-dirs)): tools
947 # The "examples" conditionally depend on U-Boot (say, when USE_PRIVATE_LIBGCC
948 # is "yes"), so compile examples after U-Boot is compiled.
949 examples: $(filter-out examples, $(u-boot-dirs))
951 define filechk_uboot.release
952 echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
955 # Store (new) UBOOTRELEASE string in include/config/uboot.release
956 include/config/uboot.release: Makefile FORCE
957 $(call filechk,uboot.release)
960 # Things we need to do before we recursively start building the kernel
961 # or the modules are listed in "prepare".
962 # A multi level approach is used. prepareN is processed before prepareN-1.
963 # archprepare is used in arch Makefiles and when processed asm symlink,
964 # version.h and scripts_basic is processed / created.
966 # Listed in dependency order
967 PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3
969 # prepare3 is used to check if we are building in a separate output directory,
971 # 1) Check that make has not been executed in the kernel src $(srctree)
972 prepare3: include/config/uboot.release
973 ifneq ($(KBUILD_SRC),)
974 @$(kecho) ' Using $(srctree) as source for u-boot'
975 $(Q)if [ -f $(srctree)/include/config.mk ]; then \
976 echo >&2 " $(srctree) is not clean, please run 'make mrproper'"; \
977 echo >&2 " in the '$(srctree)' directory.";\
982 # prepare2 creates a makefile if using a separate output directory
983 prepare2: prepare3 outputmakefile
985 prepare1: prepare2 $(version_h) $(timestamp_h)
986 ifeq ($(__HAVE_ARCH_GENERIC_BOARD),)
987 ifeq ($(CONFIG_SYS_GENERIC_BOARD),y)
988 @echo >&2 " Your architecture does not support generic board."
989 @echo >&2 " Please undefine CONFIG_SYS_GENERIC_BOARD in your board config file."
993 ifeq ($(wildcard $(LDSCRIPT)),)
994 @echo >&2 " Could not find linker script."
998 archprepare: prepare1 scripts_basic
1000 prepare0: archprepare FORCE
1001 $(Q)$(MAKE) $(build)=.
1003 # All the preparing..
1006 # Generate some files
1007 # ---------------------------------------------------------------------------
1009 define filechk_version.h
1010 (echo \#define PLAIN_VERSION \"$(UBOOTRELEASE)\"; \
1011 echo \#define U_BOOT_VERSION \"U-Boot \" PLAIN_VERSION; \
1012 echo \#define CC_VERSION_STRING \"$$($(CC) --version | head -n 1)\"; \
1013 echo \#define LD_VERSION_STRING \"$$($(LD) --version | head -n 1)\"; )
1016 define filechk_timestamp.h
1017 (LC_ALL=C date +'#define U_BOOT_DATE "%b %d %C%y"'; \
1018 LC_ALL=C date +'#define U_BOOT_TIME "%T"')
1021 $(version_h): include/config/uboot.release FORCE
1022 $(call filechk,version.h)
1024 $(timestamp_h): $(srctree)/Makefile FORCE
1025 $(call filechk,timestamp.h)
1028 # Auto-generate the autoconf.mk file (which is included by all makefiles)
1030 # This target actually generates 2 files; autoconf.mk and autoconf.mk.dep.
1031 # the dep file is only include in this top level makefile to determine when
1032 # to regenerate the autoconf.mk file.
1034 quiet_cmd_autoconf_dep = GEN $@
1035 cmd_autoconf_dep = $(CC) -x c -DDO_DEPS_ONLY -M $(c_flags) \
1036 -MQ include/autoconf.mk $(srctree)/include/common.h > $@ || rm $@
1038 include/autoconf.mk.dep: include/config.h include/common.h
1039 $(call cmd,autoconf_dep)
1041 quiet_cmd_autoconf = GEN $@
1043 $(CPP) $(c_flags) -DDO_DEPS_ONLY -dM $(srctree)/include/common.h > $@.tmp && \
1044 sed -n -f $(srctree)/tools/scripts/define2mk.sed $@.tmp > $@; \
1047 include/autoconf.mk: include/config.h
1048 $(call cmd,autoconf)
1050 # ---------------------------------------------------------------------------
1054 @echo '*** Warning: make $@ is unnecessary now.'
1056 # ---------------------------------------------------------------------------
1057 quiet_cmd_cpp_lds = LDS $@
1058 cmd_cpp_lds = $(CPP) $(cpp_flags) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ \
1059 -x assembler-with-cpp -P -o $@ $<
1061 u-boot.lds: $(LDSCRIPT) prepare FORCE
1062 $(call if_changed,cpp_lds)
1066 $(Q)$(MAKE) $(build)=nand_spl/board/$(BOARDDIR) all
1068 @echo >&2 "==================== WARNING ====================="
1069 @echo >&2 "nand_spl will not be included in v2014.07 release."
1070 @echo >&2 "Please switch over to SPL."
1071 @echo >&2 "Otherwise, this board will be removed."
1072 @echo >&2 "=================================================="
1075 nand_spl/u-boot-spl-16k.bin: nand_spl
1078 u-boot-nand.bin: nand_spl/u-boot-spl-16k.bin u-boot.bin FORCE
1079 $(call if_changed,cat)
1081 spl/u-boot-spl.bin: spl/u-boot-spl
1083 spl/u-boot-spl: tools prepare
1084 $(Q)$(MAKE) obj=spl -f $(srctree)/spl/Makefile all
1086 tpl/u-boot-tpl.bin: tools prepare
1087 $(Q)$(MAKE) obj=tpl -f $(srctree)/spl/Makefile all CONFIG_TPL_BUILD=y
1089 TAG_SUBDIRS := $(u-boot-dirs) include
1095 ctags -w -o ctags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
1096 -name '*.[chS]' -print`
1099 etags -a -o $(obj)etags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
1100 -name '*.[chS]' -print`
1102 $(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) -name '*.[chS]' -print > \
1108 grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
1111 @$(call SYSTEM_MAP,$<) > $@
1114 @if test $(call dtc-version) -lt 0104; then \
1115 echo '*** Your dtc is too old, please upgrade to dtc 1.4 or newer'; \
1119 #########################################################################
1121 # ARM relocations should all be R_ARM_RELATIVE (32-bit) or
1122 # R_AARCH64_RELATIVE (64-bit).
1123 checkarmreloc: u-boot
1124 @RELOC="`$(CROSS_COMPILE)readelf -r -W $< | cut -d ' ' -f 4 | \
1125 grep R_A | sort -u`"; \
1126 if test "$$RELOC" != "R_ARM_RELATIVE" -a \
1127 "$$RELOC" != "R_AARCH64_RELATIVE"; then \
1128 echo "$< contains unexpected relocations: $$RELOC"; \
1133 $(Q)$(MAKE) $(build)=tools/$@
1135 tools-all: export HOST_TOOLS_ALL=y
1136 tools-all: env tools ;
1138 cross_tools: export CROSS_BUILD_TOOLS=y
1139 cross_tools: tools ;
1143 git log --no-merges U-Boot-1_1_5.. | \
1144 unexpand -a | sed -e 's/\s\s*$$//' > $@
1146 include/license.h: tools/bin2header COPYING
1147 cat COPYING | gzip -9 -c | ./tools/bin2header license_gzip > include/license.h
1148 #########################################################################
1151 # Cleaning is done on three levels.
1152 # make clean Delete most generated files
1153 # Leave enough to build external modules
1154 # make mrproper Delete the current configuration, and all generated files
1155 # make distclean Remove editor backup files, patch leftover files and the like
1157 # Directories & files removed with 'make clean'
1158 CLEAN_DIRS += $(MODVERDIR)
1159 CLEAN_FILES += u-boot.lds include/bmp_logo.h include/bmp_logo_data.h \
1160 include/autoconf.mk* include/spl-autoconf.mk \
1161 include/tpl-autoconf.mk
1163 # Directories & files removed with 'make clobber'
1164 CLOBBER_DIRS += $(patsubst %,spl/%, $(filter-out Makefile, \
1165 $(shell ls -1 spl 2>/dev/null))) \
1167 CLOBBER_FILES += u-boot* MLO* SPL System.map nand_spl/u-boot*
1169 # Directories & files removed with 'make mrproper'
1170 MRPROPER_DIRS += include/config include/generated
1171 MRPROPER_FILES += .config .config.old \
1172 tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS \
1173 include/config.h include/config.mk
1175 # clean - Delete most, but leave enough to build external modules
1177 clean: rm-dirs := $(CLEAN_DIRS)
1178 clean: rm-files := $(CLEAN_FILES)
1180 clean-dirs := $(foreach f,$(u-boot-alldirs),$(if $(wildcard $f/Makefile),$f))
1182 clean-dirs := $(addprefix _clean_, $(clean-dirs) doc/DocBook)
1184 PHONY += $(clean-dirs) clean archclean
1186 $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
1188 # TODO: Do not use *.cfgtmp
1189 clean: $(clean-dirs)
1192 @find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
1193 \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
1194 -o -name '*.ko.*' -o -name '*.su' -o -name '*.cfgtmp' \
1195 -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
1196 -o -name '*.symtypes' -o -name 'modules.order' \
1197 -o -name modules.builtin -o -name '.tmp_*.o.*' \
1198 -o -name '*.gcno' \) -type f -print | xargs rm -f
1199 @find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
1200 -path './nand_spl/*' -type l -print | xargs rm -f
1204 clobber: rm-dirs := $(CLOBBER_DIRS)
1205 clobber: rm-files := $(CLOBBER_FILES)
1213 # mrproper - Delete all generated files, including .config
1215 mrproper: rm-dirs := $(wildcard $(MRPROPER_DIRS))
1216 mrproper: rm-files := $(wildcard $(MRPROPER_FILES))
1217 mrproper-dirs := $(addprefix _mrproper_,scripts)
1219 PHONY += $(mrproper-dirs) mrproper archmrproper
1221 $(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)
1223 mrproper: clobber $(mrproper-dirs)
1226 @rm -f arch/*/include/asm/arch arch/*/include/asm/proc
1233 @find $(srctree) $(RCS_FIND_IGNORE) \
1234 \( -name '*.orig' -o -name '*.rej' -o -name '*~' \
1235 -o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
1237 -o -name '*%' -o -name '.*.cmd' -o -name 'core' \) \
1238 -type f -print | xargs rm -f
1241 F=`basename $(srctree)` ; cd .. ; \
1242 gtar --force-local -zcvf `LC_ALL=C date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F
1245 @echo 'Cleaning targets:'
1246 @echo ' clean - Remove most generated files but keep the config and'
1247 @echo ' necessities for testing u-boot'
1248 @echo ' clobber - Remove most generated files but keep the config'
1249 @echo ' mrproper - Remove all generated files + config + various backup files'
1250 @echo ' distclean - mrproper + remove editor backup and patch files'
1252 # uncomment after adding Kconfig feature
1253 # @echo 'Configuration targets:'
1254 # @$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help
1256 @echo 'Other generic targets:'
1257 @echo ' all - Build all necessary images depending on configuration'
1258 @echo ' u-boot - Build the bare u-boot'
1259 @echo ' dir/ - Build all files in dir and below'
1260 @echo ' dir/file.[oisS] - Build specified target only'
1261 @echo ' dir/file.lst - Build specified mixed source/assembly target only'
1262 @echo ' (requires a recent binutils and recent build (System.map))'
1263 @echo ' tags/TAGS - Generate tags file for editors'
1264 @echo ' cscope - Generate cscope index'
1265 @echo ' ubootrelease - Output the release version string'
1266 @echo ' ubootversion - Output the version stored in Makefile'
1268 @echo 'Static analysers'
1269 @echo ' checkstack - Generate a list of stack hogs'
1271 @echo 'Documentation targets:'
1272 @$(MAKE) -f $(srctree)/doc/DocBook/Makefile dochelp
1274 @echo ' make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build'
1275 @echo ' make V=2 [targets] 2 => give reason for rebuild of target'
1276 @echo ' make O=dir [targets] Locate all output files in "dir", including .config'
1277 @echo ' make C=1 [targets] Check all c source with $$CHECK (sparse by default)'
1278 @echo ' make C=2 [targets] Force check of all c source with $$CHECK'
1279 @echo ' make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections'
1280 @echo ' make W=n [targets] Enable extra gcc checks, n=1,2,3 where'
1281 @echo ' 1: warnings which may be relevant and do not occur too often'
1282 @echo ' 2: warnings which occur quite often but may still be relevant'
1283 @echo ' 3: more obscure warnings, can most likely be ignored'
1284 @echo ' Multiple levels can be combined with W=12 or W=123'
1286 @echo 'Execute "make" or "make all" to build all targets marked with [*] '
1287 @echo 'For further info see the ./README file'
1290 # Documentation targets
1291 # ---------------------------------------------------------------------------
1292 %docs: scripts_basic FORCE
1293 $(Q)$(MAKE) $(build)=scripts build_docproc
1294 $(Q)$(MAKE) $(build)=doc/DocBook $@
1297 PHONY += prepare scripts
1301 endif #ifeq ($(config-targets),1)
1302 endif #ifeq ($(mixed-targets),1)
1304 PHONY += checkstack ubootrelease ubootversion
1307 $(OBJDUMP) -d u-boot $$(find . -name u-boot-spl) | \
1308 $(PERL) $(src)/scripts/checkstack.pl $(ARCH)
1311 @echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
1314 @echo $(UBOOTVERSION)
1317 # ---------------------------------------------------------------------------
1318 # Single targets are compatible with:
1319 # - build with mixed source and output
1320 # - build with separate output dir 'make O=...'
1321 # - external modules
1323 # target-dir => where to store outputfile
1324 # build-dir => directory in kernel source tree to use
1326 ifeq ($(KBUILD_EXTMOD),)
1327 build-dir = $(patsubst %/,%,$(dir $@))
1328 target-dir = $(dir $@)
1330 zap-slash=$(filter-out .,$(patsubst %/,%,$(dir $@)))
1331 build-dir = $(KBUILD_EXTMOD)$(if $(zap-slash),/$(zap-slash))
1332 target-dir = $(if $(KBUILD_EXTMOD),$(dir $<),$(dir $@))
1335 %.s: %.c prepare scripts FORCE
1336 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1337 %.i: %.c prepare scripts FORCE
1338 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1339 %.o: %.c prepare scripts FORCE
1340 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1341 %.lst: %.c prepare scripts FORCE
1342 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1343 %.s: %.S prepare scripts FORCE
1344 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1345 %.o: %.S prepare scripts FORCE
1346 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1347 %.symtypes: %.c prepare scripts FORCE
1348 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1351 /: prepare scripts FORCE
1353 $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
1354 $(build)=$(build-dir)
1355 %/: prepare scripts FORCE
1357 $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
1358 $(build)=$(build-dir)
1359 %.ko: prepare scripts FORCE
1361 $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
1362 $(build)=$(build-dir) $(@:.ko=.o)
1363 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
1365 # FIXME Should go into a make.lib or something
1366 # ===========================================================================
1368 quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN $(wildcard $(rm-dirs)))
1369 cmd_rmdirs = rm -rf $(rm-dirs)
1371 quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN $(wildcard $(rm-files)))
1372 cmd_rmfiles = rm -f $(rm-files)
1374 # read all saved command lines
1376 targets := $(wildcard $(sort $(targets)))
1377 cmd_files := $(wildcard .*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
1379 ifneq ($(cmd_files),)
1380 $(cmd_files): ; # Do not try to update included dependency files
1381 include $(cmd_files)
1384 # Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=dir
1386 # $(Q)$(MAKE) $(clean)=dir
1387 clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj
1389 endif # skip-makefile
1394 # Declare the contents of the .PHONY variable as phony. We keep that
1395 # information in a variable so we can use it in if_changed and friends.