git.sur5r.net Git - u-boot/blob - README

   1 U-Boot for Amlogic P212
   2 =======================
   3
   4 P212 is a reference board manufactured by Amlogic with the following
   5 specifications:
   6
   7  - Amlogic S905X ARM Cortex-A53 quad-core SoC @ 1.5GHz
   8  - ARM Mali 450 GPU
   9  - 2GB DDR3 SDRAM
  10  - 10/100 Ethernet
  11  - HDMI 2.0 4K/60Hz display
  12  - 2 x USB 2.0 Host
  13  - eMMC, microSD
  14  - Infrared receiver
  15  - SDIO WiFi Module
  16  - CVBS+Stereo Audio Jack
  17
  18 Schematics are available from Amlogic on demand.
  19
  20 Currently the u-boot port supports the following devices:
  21  - serial
  22  - eMMC, microSD
  23
  24 u-boot compilation
  25 ==================
  26
  27  > export ARCH=arm
  28  > export CROSS_COMPILE=aarch64-none-elf-
  29  > make p212_defconfig
  30  > make
  31
  32 Image creation
  33 ==============
  34
  35 Amlogic doesn't provide sources for the firmware and for tools needed
  36 to create the bootloader image, so it is necessary to obtain them from
  37 the git tree published by the board vendor:
  38
  39  > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
  40  > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
  41  > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
  42  > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
  43  > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH
  44  > git clone https://github.com/BayLibre/u-boot.git -b n-amlogic-openlinux-20170606 amlogic-u-boot
  45  > cd amlogic-u-boot
  46  > make gxl_p212_v1_defconfig
  47  > make
  48  > export FIPDIR=$PWD/fip
  49
  50 Go back to mainline U-boot source tree then :
  51  > mkdir fip
  52
  53  > cp $FIPDIR/gxl/bl2.bin fip/
  54  > cp $FIPDIR/gxl/acs.bin fip/
  55  > cp $FIPDIR/gxl/bl21.bin fip/
  56  > cp $FIPDIR/gxl/bl30.bin fip/
  57  > cp $FIPDIR/gxl/bl301.bin fip/
  58  > cp $FIPDIR/gxl/bl31.img fip/
  59  > cp u-boot.bin fip/bl33.bin
  60
  61  > $FIPDIR/blx_fix.sh \
  62         fip/bl30.bin \
  63         fip/zero_tmp \
  64         fip/bl30_zero.bin \
  65         fip/bl301.bin \
  66         fip/bl301_zero.bin \
  67         fip/bl30_new.bin \
  68         bl30
  69
  70  > $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0
  71
  72  > $FIPDIR/blx_fix.sh \
  73         fip/bl2_acs.bin \
  74         fip/zero_tmp \
  75         fip/bl2_zero.bin \
  76         fip/bl21.bin \
  77         fip/bl21_zero.bin \
  78         fip/bl2_new.bin \
  79         bl2
  80
  81  > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin
  82  > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img
  83  > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin
  84  > $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig
  85  > $FIPDIR/gxl/aml_encrypt_gxl --bootmk \
  86                 --output fip/u-boot.bin \
  87                 --bl2 fip/bl2.n.bin.sig \
  88                 --bl30 fip/bl30_new.bin.enc \
  89                 --bl31 fip/bl31.img.enc \
  90                 --bl33 fip/bl33.bin.enc
  91
  92 and then write the image to SD with:
  93
  94  > DEV=/dev/your_sd_device
  95  > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
  96  > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444