git.sur5r.net Git - u-boot/blob - arch/arm/Kconfig

   1 menu "ARM architecture"
   2         depends on ARM
   3
   4 config SYS_ARCH
   5         default "arm"
   6
   7 config ARM64
   8         bool
   9         select PHYS_64BIT
  10         select SYS_CACHE_SHIFT_6
  11
  12 config DMA_ADDR_T_64BIT
  13         bool
  14         default y if ARM64
  15
  16 config HAS_VBAR
  17         bool
  18
  19 config HAS_THUMB2
  20         bool
  21
  22 # Used for compatibility with asm files copied from the kernel
  23 config ARM_ASM_UNIFIED
  24         bool
  25         default y
  26
  27 # Used for compatibility with asm files copied from the kernel
  28 config THUMB2_KERNEL
  29         bool
  30
  31 # If set, the workarounds for these ARM errata are applied early during U-Boot
  32 # startup. Note that in general these options force the workarounds to be
  33 # applied; no CPU-type/version detection exists, unlike the similar options in
  34 # the Linux kernel. Do not set these options unless they apply!  Also note that
  35 # the following can be machine specific errata. These do have ability to
  36 # provide rudimentary version and machine specific checks, but expect no
  37 # product checks:
  38 # CONFIG_ARM_ERRATA_430973
  39 # CONFIG_ARM_ERRATA_454179
  40 # CONFIG_ARM_ERRATA_621766
  41 # CONFIG_ARM_ERRATA_798870
  42 # CONFIG_ARM_ERRATA_801819
  43 config ARM_ERRATA_430973
  44         bool
  45
  46 config ARM_ERRATA_454179
  47         bool
  48
  49 config ARM_ERRATA_621766
  50         bool
  51
  52 config ARM_ERRATA_716044
  53         bool
  54
  55 config ARM_ERRATA_725233
  56         bool
  57
  58 config ARM_ERRATA_742230
  59         bool
  60
  61 config ARM_ERRATA_743622
  62         bool
  63
  64 config ARM_ERRATA_751472
  65         bool
  66
  67 config ARM_ERRATA_761320
  68         bool
  69
  70 config ARM_ERRATA_773022
  71         bool
  72
  73 config ARM_ERRATA_774769
  74         bool
  75
  76 config ARM_ERRATA_794072
  77         bool
  78
  79 config ARM_ERRATA_798870
  80         bool
  81
  82 config ARM_ERRATA_801819
  83         bool
  84
  85 config ARM_ERRATA_826974
  86         bool
  87
  88 config ARM_ERRATA_828024
  89         bool
  90
  91 config ARM_ERRATA_829520
  92         bool
  93
  94 config ARM_ERRATA_833069
  95         bool
  96
  97 config ARM_ERRATA_833471
  98         bool
  99
 100 config ARM_ERRATA_852421
 101         bool
 102
 103 config ARM_ERRATA_852423
 104         bool
 105
 106 config CPU_ARM720T
 107         bool
 108         select SYS_CACHE_SHIFT_5
 109
 110 config CPU_ARM920T
 111         bool
 112         select SYS_CACHE_SHIFT_5
 113
 114 config CPU_ARM926EJS
 115         bool
 116         select SYS_CACHE_SHIFT_5
 117
 118 config CPU_ARM946ES
 119         bool
 120         select SYS_CACHE_SHIFT_5
 121
 122 config CPU_ARM1136
 123         bool
 124         select SYS_CACHE_SHIFT_5
 125
 126 config CPU_ARM1176
 127         bool
 128         select HAS_VBAR
 129         select SYS_CACHE_SHIFT_5
 130
 131 config CPU_V7
 132         bool
 133         select HAS_VBAR
 134         select HAS_THUMB2
 135         select SYS_CACHE_SHIFT_6
 136
 137 config CPU_V7M
 138         bool
 139         select HAS_THUMB2
 140         select THUMB2_KERNEL
 141         select SYS_CACHE_SHIFT_5
 142
 143 config CPU_PXA
 144         bool
 145         select SYS_CACHE_SHIFT_5
 146
 147 config CPU_SA1100
 148         bool
 149         select SYS_CACHE_SHIFT_5
 150
 151 config SYS_CPU
 152         default "arm720t" if CPU_ARM720T
 153         default "arm920t" if CPU_ARM920T
 154         default "arm926ejs" if CPU_ARM926EJS
 155         default "arm946es" if CPU_ARM946ES
 156         default "arm1136" if CPU_ARM1136
 157         default "arm1176" if CPU_ARM1176
 158         default "armv7" if CPU_V7
 159         default "armv7m" if CPU_V7M
 160         default "pxa" if CPU_PXA
 161         default "sa1100" if CPU_SA1100
 162         default "armv8" if ARM64
 163
 164 config SYS_ARM_ARCH
 165         int
 166         default 4 if CPU_ARM720T
 167         default 4 if CPU_ARM920T
 168         default 5 if CPU_ARM926EJS
 169         default 5 if CPU_ARM946ES
 170         default 6 if CPU_ARM1136
 171         default 6 if CPU_ARM1176
 172         default 7 if CPU_V7
 173         default 7 if CPU_V7M
 174         default 5 if CPU_PXA
 175         default 4 if CPU_SA1100
 176         default 8 if ARM64
 177
 178 config SYS_CACHE_SHIFT_5
 179         bool
 180
 181 config SYS_CACHE_SHIFT_6
 182         bool
 183
 184 config SYS_CACHE_SHIFT_7
 185         bool
 186
 187 config SYS_CACHELINE_SIZE
 188         int
 189         default 128 if SYS_CACHE_SHIFT_7
 190         default 64 if SYS_CACHE_SHIFT_6
 191         default 32 if SYS_CACHE_SHIFT_5
 192
 193 config ARM_SMCCC
 194         bool "Support for ARM SMC Calling Convention (SMCCC)"
 195         depends on CPU_V7 || ARM64
 196         select ARM_PSCI_FW
 197         help
 198           Say Y here if you want to enable ARM SMC Calling Convention.
 199           This should be enabled if U-Boot needs to communicate with system
 200           firmware (for example, PSCI) according to SMCCC.
 201
 202 config SEMIHOSTING
 203         bool "support boot from semihosting"
 204         help
 205           In emulated environments, semihosting is a way for
 206           the hosted environment to call out to the emulator to
 207           retrieve files from the host machine.
 208
 209 config SYS_THUMB_BUILD
 210         bool "Build U-Boot using the Thumb instruction set"
 211         depends on !ARM64
 212         help
 213            Use this flag to build U-Boot using the Thumb instruction set for
 214            ARM architectures. Thumb instruction set provides better code
 215            density. For ARM architectures that support Thumb2 this flag will
 216            result in Thumb2 code generated by GCC.
 217
 218 config SPL_SYS_THUMB_BUILD
 219         bool "Build SPL using the Thumb instruction set"
 220         default y if SYS_THUMB_BUILD
 221         depends on !ARM64
 222         help
 223            Use this flag to build SPL using the Thumb instruction set for
 224            ARM architectures. Thumb instruction set provides better code
 225            density. For ARM architectures that support Thumb2 this flag will
 226            result in Thumb2 code generated by GCC.
 227
 228 config SYS_L2CACHE_OFF
 229         bool "L2cache off"
 230         help
 231           If SoC does not support L2CACHE or one do not want to enable
 232           L2CACHE, choose this option.
 233
 234 config ENABLE_ARM_SOC_BOOT0_HOOK
 235         bool "prepare BOOT0 header"
 236         help
 237           If the SoC's BOOT0 requires a header area filled with (magic)
 238           values, then choose this option, and create a define called
 239           ARM_SOC_BOOT0_HOOK which contains the required assembler
 240           preprocessor code.
 241
 242 config ARM_CORTEX_CPU_IS_UP
 243         bool
 244         default n
 245
 246 config USE_ARCH_MEMCPY
 247         bool "Use an assembly optimized implementation of memcpy"
 248         default y
 249         depends on !ARM64
 250         help
 251           Enable the generation of an optimized version of memcpy.
 252           Such implementation may be faster under some conditions
 253           but may increase the binary size.
 254
 255 config SPL_USE_ARCH_MEMCPY
 256         bool "Use an assembly optimized implementation of memcpy"
 257         default y if USE_ARCH_MEMCPY
 258         depends on !ARM64
 259         help
 260           Enable the generation of an optimized version of memcpy.
 261           Such implementation may be faster under some conditions
 262           but may increase the binary size.
 263
 264 config USE_ARCH_MEMSET
 265         bool "Use an assembly optimized implementation of memset"
 266         default y
 267         depends on !ARM64
 268         help
 269           Enable the generation of an optimized version of memset.
 270           Such implementation may be faster under some conditions
 271           but may increase the binary size.
 272
 273 config SPL_USE_ARCH_MEMSET
 274         bool "Use an assembly optimized implementation of memset"
 275         default y if USE_ARCH_MEMSET
 276         depends on !ARM64
 277         help
 278           Enable the generation of an optimized version of memset.
 279           Such implementation may be faster under some conditions
 280           but may increase the binary size.
 281
 282 config ARM64_SUPPORT_AARCH32
 283         bool "ARM64 system support AArch32 execution state"
 284         default y if ARM64 && !TARGET_THUNDERX_88XX
 285         help
 286           This ARM64 system supports AArch32 execution state.
 287
 288 choice
 289         prompt "Target select"
 290         default TARGET_HIKEY
 291
 292 config ARCH_AT91
 293         bool "Atmel AT91"
 294         select SPL_BOARD_INIT if SPL
 295
 296 config TARGET_EDB93XX
 297         bool "Support edb93xx"
 298         select CPU_ARM920T
 299
 300 config TARGET_ASPENITE
 301         bool "Support aspenite"
 302         select CPU_ARM926EJS
 303
 304 config TARGET_GPLUGD
 305         bool "Support gplugd"
 306         select CPU_ARM926EJS
 307
 308 config ARCH_DAVINCI
 309         bool "TI DaVinci"
 310         select CPU_ARM926EJS
 311         help
 312           Support for TI's DaVinci platform.
 313
 314 config KIRKWOOD
 315         bool "Marvell Kirkwood"
 316         select CPU_ARM926EJS
 317         select BOARD_EARLY_INIT_F
 318         select ARCH_MISC_INIT
 319
 320 config ARCH_MVEBU
 321         bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)"
 322         select OF_CONTROL
 323         select OF_SEPARATE
 324         select DM
 325         select DM_ETH
 326         select DM_SERIAL
 327         select DM_SPI
 328         select DM_SPI_FLASH
 329
 330 config TARGET_DEVKIT3250
 331         bool "Support devkit3250"
 332         select CPU_ARM926EJS
 333         select SUPPORT_SPL
 334
 335 config TARGET_WORK_92105
 336         bool "Support work_92105"
 337         select CPU_ARM926EJS
 338         select SUPPORT_SPL
 339
 340 config TARGET_MX25PDK
 341         bool "Support mx25pdk"
 342         select BOARD_LATE_INIT
 343         select CPU_ARM926EJS
 344         select BOARD_EARLY_INIT_F
 345
 346 config TARGET_ZMX25
 347         bool "Support zmx25"
 348         select BOARD_LATE_INIT
 349         select CPU_ARM926EJS
 350
 351 config TARGET_APF27
 352         bool "Support apf27"
 353         select CPU_ARM926EJS
 354         select SUPPORT_SPL
 355
 356 config TARGET_APX4DEVKIT
 357         bool "Support apx4devkit"
 358         select CPU_ARM926EJS
 359         select SUPPORT_SPL
 360
 361 config TARGET_XFI3
 362         bool "Support xfi3"
 363         select CPU_ARM926EJS
 364         select SUPPORT_SPL
 365
 366 config TARGET_M28EVK
 367         bool "Support m28evk"
 368         select CPU_ARM926EJS
 369         select SUPPORT_SPL
 370
 371 config TARGET_MX23EVK
 372         bool "Support mx23evk"
 373         select CPU_ARM926EJS
 374         select SUPPORT_SPL
 375         select BOARD_EARLY_INIT_F
 376
 377 config TARGET_MX28EVK
 378         bool "Support mx28evk"
 379         select CPU_ARM926EJS
 380         select SUPPORT_SPL
 381         select BOARD_EARLY_INIT_F
 382
 383 config TARGET_MX23_OLINUXINO
 384         bool "Support mx23_olinuxino"
 385         select CPU_ARM926EJS
 386         select SUPPORT_SPL
 387         select BOARD_EARLY_INIT_F
 388
 389 config TARGET_BG0900
 390         bool "Support bg0900"
 391         select CPU_ARM926EJS
 392         select SUPPORT_SPL
 393
 394 config TARGET_SANSA_FUZE_PLUS
 395         bool "Support sansa_fuze_plus"
 396         select CPU_ARM926EJS
 397         select SUPPORT_SPL
 398
 399 config TARGET_SC_SPS_1
 400         bool "Support sc_sps_1"
 401         select CPU_ARM926EJS
 402         select SUPPORT_SPL
 403
 404 config ORION5X
 405         bool "Marvell Orion"
 406         select CPU_ARM926EJS
 407
 408 config TARGET_SPEAR300
 409         bool "Support spear300"
 410         select CPU_ARM926EJS
 411         select BOARD_EARLY_INIT_F
 412
 413 config TARGET_SPEAR310
 414         bool "Support spear310"
 415         select CPU_ARM926EJS
 416         select BOARD_EARLY_INIT_F
 417
 418 config TARGET_SPEAR320
 419         bool "Support spear320"
 420         select CPU_ARM926EJS
 421         select BOARD_EARLY_INIT_F
 422
 423 config TARGET_SPEAR600
 424         bool "Support spear600"
 425         select CPU_ARM926EJS
 426         select BOARD_EARLY_INIT_F
 427
 428 config TARGET_STV0991
 429         bool "Support stv0991"
 430         select CPU_V7
 431         select DM
 432         select DM_SERIAL
 433         select DM_SPI
 434         select DM_SPI_FLASH
 435         select SPI_FLASH
 436
 437 config TARGET_X600
 438         bool "Support x600"
 439         select BOARD_LATE_INIT
 440         select CPU_ARM926EJS
 441         select SUPPORT_SPL
 442
 443 config TARGET_IMX31_PHYCORE
 444         bool "Support imx31_phycore_eet"
 445         select CPU_ARM1136
 446         select BOARD_EARLY_INIT_F
 447
 448 config TARGET_IMX31_PHYCORE_EET
 449         bool "Support imx31_phycore_eet"
 450         select BOARD_LATE_INIT
 451         select CPU_ARM1136
 452         select BOARD_EARLY_INIT_F
 453
 454 config TARGET_MX31ADS
 455         bool "Support mx31ads"
 456         select CPU_ARM1136
 457         select BOARD_EARLY_INIT_F
 458
 459 config TARGET_MX31PDK
 460         bool "Support mx31pdk"
 461         select BOARD_LATE_INIT
 462         select CPU_ARM1136
 463         select SUPPORT_SPL
 464         select BOARD_EARLY_INIT_F
 465
 466 config TARGET_WOODBURN
 467         bool "Support woodburn"
 468         select CPU_ARM1136
 469
 470 config TARGET_WOODBURN_SD
 471         bool "Support woodburn_sd"
 472         select CPU_ARM1136
 473         select SUPPORT_SPL
 474
 475 config TARGET_FLEA3
 476         bool "Support flea3"
 477         select CPU_ARM1136
 478
 479 config TARGET_MX35PDK
 480         bool "Support mx35pdk"
 481         select BOARD_LATE_INIT
 482         select CPU_ARM1136
 483
 484 config ARCH_BCM283X
 485         bool "Broadcom BCM283X family"
 486         select DM
 487         select DM_SERIAL
 488         select DM_GPIO
 489         select OF_CONTROL
 490         imply FAT_WRITE
 491
 492 config TARGET_VEXPRESS_CA15_TC2
 493         bool "Support vexpress_ca15_tc2"
 494         select CPU_V7
 495         select CPU_V7_HAS_NONSEC
 496         select CPU_V7_HAS_VIRT
 497
 498 config TARGET_VEXPRESS_CA5X2
 499         bool "Support vexpress_ca5x2"
 500         select CPU_V7
 501
 502 config TARGET_VEXPRESS_CA9X4
 503         bool "Support vexpress_ca9x4"
 504         select CPU_V7
 505
 506 config TARGET_BCM23550_W1D
 507         bool "Support bcm23550_w1d"
 508         select CPU_V7
 509         imply CRC32_VERIFY
 510         imply FAT_WRITE
 511
 512 config TARGET_BCM28155_AP
 513         bool "Support bcm28155_ap"
 514         select CPU_V7
 515         imply CRC32_VERIFY
 516         imply FAT_WRITE
 517
 518 config TARGET_BCMCYGNUS
 519         bool "Support bcmcygnus"
 520         select CPU_V7
 521         imply CRC32_VERIFY
 522         imply CMD_HASH
 523         imply FAT_WRITE
 524         imply HASH_VERIFY
 525
 526 config TARGET_BCMNSP
 527         bool "Support bcmnsp"
 528         select CPU_V7
 529
 530 config TARGET_BCMNS2
 531         bool "Support Broadcom Northstar2"
 532         select ARM64
 533         help
 534           Support for Broadcom Northstar 2 SoCs.  NS2 is a quad-core 64-bit
 535           ARMv8 Cortex-A57 processors targeting a broad range of networking
 536           applications
 537
 538 config ARCH_EXYNOS
 539         bool "Samsung EXYNOS"
 540         select DM
 541         select DM_I2C
 542         select DM_SPI_FLASH
 543         select DM_SERIAL
 544         select DM_SPI
 545         select DM_GPIO
 546         select DM_KEYBOARD
 547         imply FAT_WRITE
 548
 549 config ARCH_S5PC1XX
 550         bool "Samsung S5PC1XX"
 551         select CPU_V7
 552         select DM
 553         select DM_SERIAL
 554         select DM_GPIO
 555         select DM_I2C
 556
 557 config ARCH_HIGHBANK
 558         bool "Calxeda Highbank"
 559         select CPU_V7
 560
 561 config ARCH_INTEGRATOR
 562         bool "ARM Ltd. Integrator family"
 563         select DM
 564         select DM_SERIAL
 565
 566 config ARCH_KEYSTONE
 567         bool "TI Keystone"
 568         select CPU_V7
 569         select SUPPORT_SPL
 570         select SYS_THUMB_BUILD
 571         select CMD_POWEROFF
 572         imply FIT
 573
 574 config ARCH_OMAP2PLUS
 575         bool "TI OMAP2+"
 576         select CPU_V7
 577         select SPL_BOARD_INIT if SPL
 578         select SUPPORT_SPL
 579         imply FIT
 580
 581 config ARCH_MESON
 582         bool "Amlogic Meson"
 583         help
 584           Support for the Meson SoC family developed by Amlogic Inc.,
 585           targeted at media players and tablet computers. We currently
 586           support the S905 (GXBaby) 64-bit SoC.
 587
 588 config ARCH_MX7ULP
 589         bool "NXP MX7ULP"
 590         select CPU_V7
 591         select ROM_UNIFIED_SECTIONS
 592
 593 config ARCH_MX7
 594         bool "Freescale MX7"
 595         select CPU_V7
 596         select SYS_FSL_HAS_SEC if SECURE_BOOT
 597         select SYS_FSL_SEC_COMPAT_4
 598         select SYS_FSL_SEC_LE
 599         select BOARD_EARLY_INIT_F
 600         select ARCH_MISC_INIT
 601
 602 config ARCH_MX6
 603         bool "Freescale MX6"
 604         select CPU_V7
 605         select SYS_FSL_HAS_SEC if SECURE_BOOT
 606         select SYS_FSL_SEC_COMPAT_4
 607         select SYS_FSL_SEC_LE
 608         select SYS_THUMB_BUILD if SPL
 609
 610 config ARCH_MX5
 611         bool "Freescale MX5"
 612         select CPU_V7
 613         select BOARD_EARLY_INIT_F
 614
 615 config ARCH_RMOBILE
 616         bool "Renesas ARM SoCs"
 617         select DM
 618         select DM_SERIAL
 619         select BOARD_EARLY_INIT_F
 620         imply FAT_WRITE
 621         imply SYS_THUMB_BUILD
 622
 623 config TARGET_S32V234EVB
 624         bool "Support s32v234evb"
 625         select ARM64
 626         select SYS_FSL_ERRATUM_ESDHC111
 627
 628 config ARCH_SNAPDRAGON
 629         bool "Qualcomm Snapdragon SoCs"
 630         select ARM64
 631         select DM
 632         select DM_GPIO
 633         select DM_SERIAL
 634         select SPMI
 635         select OF_CONTROL
 636         select OF_SEPARATE
 637
 638 config ARCH_SOCFPGA
 639         bool "Altera SOCFPGA family"
 640         select CPU_V7
 641         select SUPPORT_SPL
 642         select OF_CONTROL
 643         select SPL_OF_CONTROL
 644         select DM
 645         select DM_SPI_FLASH
 646         select DM_SPI
 647         select ENABLE_ARM_SOC_BOOT0_HOOK
 648         select ARCH_EARLY_INIT_R
 649         select ARCH_MISC_INIT
 650         select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
 651         select SYS_THUMB_BUILD
 652         imply CRC32_VERIFY
 653         imply FAT_WRITE
 654
 655 config ARCH_SUNXI
 656         bool "Support sunxi (Allwinner) SoCs"
 657         select CMD_GPIO
 658         select CMD_MMC if MMC
 659         select CMD_USB if DISTRO_DEFAULTS
 660         select DM
 661         select DM_ETH
 662         select DM_GPIO
 663         select DM_KEYBOARD
 664         select DM_SERIAL
 665         select DM_USB if DISTRO_DEFAULTS
 666         select OF_BOARD_SETUP
 667         select OF_CONTROL
 668         select OF_SEPARATE
 669         select SPL_STACK_R if SUPPORT_SPL
 670         select SPL_SYS_MALLOC_SIMPLE if SUPPORT_SPL
 671         select SYS_NS16550
 672         select SPL_SYS_THUMB_BUILD if !ARM64
 673         select USB if DISTRO_DEFAULTS
 674         select USB_STORAGE if DISTRO_DEFAULTS
 675         select USB_KEYBOARD if DISTRO_DEFAULTS
 676         select USE_TINY_PRINTF
 677         imply FAT_WRITE
 678         imply PRE_CONSOLE_BUFFER
 679         imply SPL_GPIO_SUPPORT
 680         imply SPL_LIBCOMMON_SUPPORT
 681         imply SPL_LIBDISK_SUPPORT
 682         imply SPL_LIBGENERIC_SUPPORT
 683         imply SPL_MMC_SUPPORT if MMC
 684         imply SPL_POWER_SUPPORT
 685         imply SPL_SERIAL_SUPPORT
 686
 687 config TARGET_TS4600
 688         bool "Support TS4600"
 689         select CPU_ARM926EJS
 690         select SUPPORT_SPL
 691
 692 config ARCH_VF610
 693         bool "Freescale Vybrid"
 694         select CPU_V7
 695         select SYS_FSL_ERRATUM_ESDHC111
 696
 697 config ARCH_ZYNQ
 698         bool "Xilinx Zynq Platform"
 699         select BOARD_LATE_INIT
 700         select CPU_V7
 701         select SUPPORT_SPL
 702         select OF_CONTROL
 703         select SPL_BOARD_INIT if SPL
 704         select SPL_OF_CONTROL if SPL
 705         select DM
 706         select DM_ETH
 707         select DM_GPIO
 708         select SPL_DM if SPL
 709         select DM_MMC
 710         select DM_MMC_OPS
 711         select DM_SPI
 712         select DM_SERIAL
 713         select DM_SPI_FLASH
 714         select SPL_SEPARATE_BSS if SPL
 715         select DM_USB if USB
 716         select BLK
 717         select CLK
 718         select SPL_CLK
 719         select CLK_ZYNQ
 720         imply CMD_CLK
 721         imply FAT_WRITE
 722
 723 config ARCH_ZYNQMP
 724         bool "Support Xilinx ZynqMP Platform"
 725         select ARM64
 726         select BOARD_LATE_INIT
 727         select DM
 728         select OF_CONTROL
 729         select DM_SERIAL
 730         select SUPPORT_SPL
 731         select CLK
 732         select SPL_BOARD_INIT if SPL
 733         select SPL_CLK
 734         select DM_USB if USB
 735         imply FAT_WRITE
 736
 737 config TEGRA
 738         bool "NVIDIA Tegra"
 739         imply FAT_WRITE
 740
 741 config TARGET_VEXPRESS64_AEMV8A
 742         bool "Support vexpress_aemv8a"
 743         select ARM64
 744
 745 config TARGET_VEXPRESS64_BASE_FVP
 746         bool "Support Versatile Express ARMv8a FVP BASE model"
 747         select ARM64
 748         select SEMIHOSTING
 749
 750 config TARGET_VEXPRESS64_BASE_FVP_DRAM
 751         bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM"
 752         select ARM64
 753         help
 754           This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides
 755           the default config to allow the user to load the images directly into
 756           DRAM using model parameters rather than by using semi-hosting to load
 757           the files from the host filesystem.
 758
 759 config TARGET_VEXPRESS64_JUNO
 760         bool "Support Versatile Express Juno Development Platform"
 761         select ARM64
 762
 763 config TARGET_LS2080A_EMU
 764         bool "Support ls2080a_emu"
 765         select ARCH_LS2080A
 766         select ARM64
 767         select ARMV8_MULTIENTRY
 768         select ARCH_MISC_INIT
 769         help
 770           Support for Freescale LS2080A_EMU platform
 771           The LS2080A Development System (EMULATOR) is a pre silicon
 772           development platform that supports the QorIQ LS2080A
 773           Layerscape Architecture processor.
 774
 775 config TARGET_LS2080A_SIMU
 776         bool "Support ls2080a_simu"
 777         select ARCH_LS2080A
 778         select ARM64
 779         select ARMV8_MULTIENTRY
 780         select ARCH_MISC_INIT
 781         help
 782           Support for Freescale LS2080A_SIMU platform
 783           The LS2080A Development System (QDS) is a pre silicon
 784           development platform that supports the QorIQ LS2080A
 785           Layerscape Architecture processor.
 786
 787 config TARGET_LS2080AQDS
 788         bool "Support ls2080aqds"
 789         select ARCH_LS2080A
 790         select ARM64
 791         select ARMV8_MULTIENTRY
 792         select BOARD_LATE_INIT
 793         select SUPPORT_SPL
 794         select ARCH_MISC_INIT
 795         help
 796           Support for Freescale LS2080AQDS platform
 797           The LS2080A Development System (QDS) is a high-performance
 798           development platform that supports the QorIQ LS2080A
 799           Layerscape Architecture processor.
 800
 801 config TARGET_LS2080ARDB
 802         bool "Support ls2080ardb"
 803         select ARCH_LS2080A
 804         select ARM64
 805         select ARMV8_MULTIENTRY
 806         select BOARD_LATE_INIT
 807         select SUPPORT_SPL
 808         select ARCH_MISC_INIT
 809         help
 810           Support for Freescale LS2080ARDB platform.
 811           The LS2080A Reference design board (RDB) is a high-performance
 812           development platform that supports the QorIQ LS2080A
 813           Layerscape Architecture processor.
 814
 815 config TARGET_LS2081ARDB
 816         bool "Support ls2081ardb"
 817         select ARCH_LS2080A
 818         select ARM64
 819         select ARMV8_MULTIENTRY
 820         select BOARD_LATE_INIT
 821         select SUPPORT_SPL
 822         select ARCH_MISC_INIT
 823         help
 824           Support for Freescale LS2081ARDB platform.
 825           The LS2081A Reference design board (RDB) is a high-performance
 826           development platform that supports the QorIQ LS2081A/LS2041A
 827           Layerscape Architecture processor.
 828
 829 config TARGET_HIKEY
 830         bool "Support HiKey 96boards Consumer Edition Platform"
 831         select ARM64
 832         select DM
 833         select DM_GPIO
 834         select DM_SERIAL
 835         select OF_CONTROL
 836           help
 837           Support for HiKey 96boards platform. It features a HI6220
 838           SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM.
 839
 840 config TARGET_LS1012AQDS
 841         bool "Support ls1012aqds"
 842         select ARCH_LS1012A
 843         select ARM64
 844         select BOARD_LATE_INIT
 845         help
 846           Support for Freescale LS1012AQDS platform.
 847           The LS1012A Development System (QDS) is a high-performance
 848           development platform that supports the QorIQ LS1012A
 849           Layerscape Architecture processor.
 850
 851 config TARGET_LS1012ARDB
 852         bool "Support ls1012ardb"
 853         select ARCH_LS1012A
 854         select ARM64
 855         select BOARD_LATE_INIT
 856         help
 857           Support for Freescale LS1012ARDB platform.
 858           The LS1012A Reference design board (RDB) is a high-performance
 859           development platform that supports the QorIQ LS1012A
 860           Layerscape Architecture processor.
 861
 862 config TARGET_LS1012AFRDM
 863         bool "Support ls1012afrdm"
 864         select ARCH_LS1012A
 865         select ARM64
 866         help
 867           Support for Freescale LS1012AFRDM platform.
 868           The LS1012A Freedom  board (FRDM) is a high-performance
 869           development platform that supports the QorIQ LS1012A
 870           Layerscape Architecture processor.
 871
 872 config TARGET_LS1021AQDS
 873         bool "Support ls1021aqds"
 874         select BOARD_LATE_INIT
 875         select CPU_V7
 876         select CPU_V7_HAS_NONSEC
 877         select CPU_V7_HAS_VIRT
 878         select SUPPORT_SPL
 879         select ARCH_LS1021A
 880         select ARCH_SUPPORT_PSCI
 881         select LS1_DEEP_SLEEP
 882         select SYS_FSL_DDR
 883         select BOARD_EARLY_INIT_F
 884
 885 config TARGET_LS1021ATWR
 886         bool "Support ls1021atwr"
 887         select BOARD_LATE_INIT
 888         select CPU_V7
 889         select CPU_V7_HAS_NONSEC
 890         select CPU_V7_HAS_VIRT
 891         select SUPPORT_SPL
 892         select ARCH_LS1021A
 893         select ARCH_SUPPORT_PSCI
 894         select LS1_DEEP_SLEEP
 895         select BOARD_EARLY_INIT_F
 896
 897 config TARGET_LS1021AIOT
 898         bool "Support ls1021aiot"
 899         select BOARD_LATE_INIT
 900         select CPU_V7
 901         select CPU_V7_HAS_NONSEC
 902         select CPU_V7_HAS_VIRT
 903         select SUPPORT_SPL
 904         select ARCH_LS1021A
 905         select ARCH_SUPPORT_PSCI
 906         help
 907           Support for Freescale LS1021AIOT platform.
 908           The LS1021A Freescale board (IOT) is a high-performance
 909           development platform that supports the QorIQ LS1021A
 910           Layerscape Architecture processor.
 911
 912 config TARGET_LS1043AQDS
 913         bool "Support ls1043aqds"
 914         select ARCH_LS1043A
 915         select ARM64
 916         select ARMV8_MULTIENTRY
 917         select BOARD_LATE_INIT
 918         select SUPPORT_SPL
 919         select BOARD_EARLY_INIT_F
 920         help
 921           Support for Freescale LS1043AQDS platform.
 922
 923 config TARGET_LS1043ARDB
 924         bool "Support ls1043ardb"
 925         select ARCH_LS1043A
 926         select ARM64
 927         select ARMV8_MULTIENTRY
 928         select BOARD_LATE_INIT
 929         select SUPPORT_SPL
 930         select BOARD_EARLY_INIT_F
 931         help
 932           Support for Freescale LS1043ARDB platform.
 933
 934 config TARGET_LS1046AQDS
 935         bool "Support ls1046aqds"
 936         select ARCH_LS1046A
 937         select ARM64
 938         select ARMV8_MULTIENTRY
 939         select BOARD_LATE_INIT
 940         select SUPPORT_SPL
 941         select DM_SPI_FLASH if DM_SPI
 942         select BOARD_EARLY_INIT_F
 943         help
 944           Support for Freescale LS1046AQDS platform.
 945           The LS1046A Development System (QDS) is a high-performance
 946           development platform that supports the QorIQ LS1046A
 947           Layerscape Architecture processor.
 948
 949 config TARGET_LS1046ARDB
 950         bool "Support ls1046ardb"
 951         select ARCH_LS1046A
 952         select ARM64
 953         select ARMV8_MULTIENTRY
 954         select BOARD_LATE_INIT
 955         select SUPPORT_SPL
 956         select DM_SPI_FLASH if DM_SPI
 957         select POWER_MC34VR500
 958         select BOARD_EARLY_INIT_F
 959         help
 960           Support for Freescale LS1046ARDB platform.
 961           The LS1046A Reference Design Board (RDB) is a high-performance
 962           development platform that supports the QorIQ LS1046A
 963           Layerscape Architecture processor.
 964
 965 config TARGET_H2200
 966         bool "Support h2200"
 967         select CPU_PXA
 968
 969 config TARGET_ZIPITZ2
 970         bool "Support zipitz2"
 971         select CPU_PXA
 972
 973 config TARGET_COLIBRI_PXA270
 974         bool "Support colibri_pxa270"
 975         select CPU_PXA
 976
 977 config ARCH_UNIPHIER
 978         bool "Socionext UniPhier SoCs"
 979         select BOARD_LATE_INIT
 980         select CLK_UNIPHIER
 981         select DM
 982         select DM_GPIO
 983         select DM_I2C
 984         select DM_MMC
 985         select DM_RESET
 986         select DM_SERIAL
 987         select DM_USB
 988         select OF_CONTROL
 989         select OF_LIBFDT
 990         select PINCTRL
 991         select SPL_BOARD_INIT if SPL
 992         select SPL_DM if SPL
 993         select SPL_LIBCOMMON_SUPPORT if SPL
 994         select SPL_LIBGENERIC_SUPPORT if SPL
 995         select SPL_OF_CONTROL if SPL
 996         select SPL_PINCTRL if SPL
 997         select SUPPORT_SPL
 998         imply FAT_WRITE
 999         help
1000           Support for UniPhier SoC family developed by Socionext Inc.
1001           (formerly, System LSI Business Division of Panasonic Corporation)
1002
1003 config STM32
1004         bool "Support STM32"
1005         select CPU_V7M
1006         select DM
1007         select DM_SERIAL
1008         select SYS_THUMB_BUILD
1009
1010 config ARCH_STI
1011         bool "Support STMicrolectronics SoCs"
1012         select CPU_V7
1013         select DM
1014         select DM_SERIAL
1015         select BLK
1016         select DM_MMC
1017         select DM_RESET
1018         help
1019           Support for STMicroelectronics STiH407/10 SoC family.
1020           This SoC is used on Linaro 96Board STiH410-B2260
1021
1022 config ARCH_ROCKCHIP
1023         bool "Support Rockchip SoCs"
1024         select OF_CONTROL
1025         select BLK
1026         select DM
1027         select SPL_DM if SPL
1028         select SYS_MALLOC_F
1029         select SYS_THUMB_BUILD if !ARM64
1030         select SPL_SYS_MALLOC_SIMPLE if SPL
1031         select DM_GPIO
1032         select DM_I2C
1033         select DM_MMC
1034         select DM_MMC_OPS
1035         select DM_SERIAL
1036         select DM_SPI
1037         select DM_SPI_FLASH
1038         select DM_USB if USB
1039         select DM_PWM
1040         select DM_REGULATOR
1041         imply FAT_WRITE
1042
1043 config TARGET_THUNDERX_88XX
1044         bool "Support ThunderX 88xx"
1045         select ARM64
1046         select OF_CONTROL
1047         select SYS_CACHE_SHIFT_7
1048
1049 config ARCH_ASPEED
1050         bool "Support Aspeed SoCs"
1051         select OF_CONTROL
1052         select DM
1053
1054 endchoice
1055
1056 source "arch/arm/mach-aspeed/Kconfig"
1057
1058 source "arch/arm/mach-at91/Kconfig"
1059
1060 source "arch/arm/mach-bcm283x/Kconfig"
1061
1062 source "arch/arm/mach-davinci/Kconfig"
1063
1064 source "arch/arm/mach-exynos/Kconfig"
1065
1066 source "arch/arm/mach-highbank/Kconfig"
1067
1068 source "arch/arm/mach-integrator/Kconfig"
1069
1070 source "arch/arm/mach-keystone/Kconfig"
1071
1072 source "arch/arm/mach-kirkwood/Kconfig"
1073
1074 source "arch/arm/mach-mvebu/Kconfig"
1075
1076 source "arch/arm/cpu/armv7/ls102xa/Kconfig"
1077
1078 source "arch/arm/cpu/armv7/mx7ulp/Kconfig"
1079
1080 source "arch/arm/cpu/armv7/mx7/Kconfig"
1081
1082 source "arch/arm/cpu/armv7/mx6/Kconfig"
1083
1084 source "arch/arm/cpu/armv7/mx5/Kconfig"
1085
1086 source "arch/arm/mach-omap2/Kconfig"
1087
1088 source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig"
1089
1090 source "arch/arm/mach-orion5x/Kconfig"
1091
1092 source "arch/arm/mach-rmobile/Kconfig"
1093
1094 source "arch/arm/mach-meson/Kconfig"
1095
1096 source "arch/arm/mach-rockchip/Kconfig"
1097
1098 source "arch/arm/mach-s5pc1xx/Kconfig"
1099
1100 source "arch/arm/mach-snapdragon/Kconfig"
1101
1102 source "arch/arm/mach-socfpga/Kconfig"
1103
1104 source "arch/arm/mach-sti/Kconfig"
1105
1106 source "arch/arm/mach-stm32/Kconfig"
1107
1108 source "arch/arm/mach-sunxi/Kconfig"
1109
1110 source "arch/arm/mach-tegra/Kconfig"
1111
1112 source "arch/arm/mach-uniphier/Kconfig"
1113
1114 source "arch/arm/cpu/armv7/vf610/Kconfig"
1115
1116 source "arch/arm/mach-zynq/Kconfig"
1117
1118 source "arch/arm/cpu/armv7/Kconfig"
1119
1120 source "arch/arm/cpu/armv8/zynqmp/Kconfig"
1121
1122 source "arch/arm/cpu/armv8/Kconfig"
1123
1124 source "arch/arm/imx-common/Kconfig"
1125
1126 source "board/aries/m28evk/Kconfig"
1127 source "board/bosch/shc/Kconfig"
1128 source "board/CarMediaLab/flea3/Kconfig"
1129 source "board/Marvell/aspenite/Kconfig"
1130 source "board/Marvell/gplugd/Kconfig"
1131 source "board/armadeus/apf27/Kconfig"
1132 source "board/armltd/vexpress/Kconfig"
1133 source "board/armltd/vexpress64/Kconfig"
1134 source "board/bluegiga/apx4devkit/Kconfig"
1135 source "board/broadcom/bcm23550_w1d/Kconfig"
1136 source "board/broadcom/bcm28155_ap/Kconfig"
1137 source "board/broadcom/bcmcygnus/Kconfig"
1138 source "board/broadcom/bcmnsp/Kconfig"
1139 source "board/broadcom/bcmns2/Kconfig"
1140 source "board/cavium/thunderx/Kconfig"
1141 source "board/cirrus/edb93xx/Kconfig"
1142 source "board/creative/xfi3/Kconfig"
1143 source "board/freescale/ls2080a/Kconfig"
1144 source "board/freescale/ls2080aqds/Kconfig"
1145 source "board/freescale/ls2080ardb/Kconfig"
1146 source "board/freescale/ls1021aqds/Kconfig"
1147 source "board/freescale/ls1043aqds/Kconfig"
1148 source "board/freescale/ls1021atwr/Kconfig"
1149 source "board/freescale/ls1021aiot/Kconfig"
1150 source "board/freescale/ls1046aqds/Kconfig"
1151 source "board/freescale/ls1043ardb/Kconfig"
1152 source "board/freescale/ls1046ardb/Kconfig"
1153 source "board/freescale/ls1012aqds/Kconfig"
1154 source "board/freescale/ls1012ardb/Kconfig"
1155 source "board/freescale/ls1012afrdm/Kconfig"
1156 source "board/freescale/mx23evk/Kconfig"
1157 source "board/freescale/mx25pdk/Kconfig"
1158 source "board/freescale/mx28evk/Kconfig"
1159 source "board/freescale/mx31ads/Kconfig"
1160 source "board/freescale/mx31pdk/Kconfig"
1161 source "board/freescale/mx35pdk/Kconfig"
1162 source "board/freescale/s32v234evb/Kconfig"
1163 source "board/gdsys/a38x/Kconfig"
1164 source "board/grinn/chiliboard/Kconfig"
1165 source "board/gumstix/pepper/Kconfig"
1166 source "board/h2200/Kconfig"
1167 source "board/hisilicon/hikey/Kconfig"
1168 source "board/imx31_phycore/Kconfig"
1169 source "board/isee/igep003x/Kconfig"
1170 source "board/olimex/mx23_olinuxino/Kconfig"
1171 source "board/phytec/pcm051/Kconfig"
1172 source "board/ppcag/bg0900/Kconfig"
1173 source "board/sandisk/sansa_fuze_plus/Kconfig"
1174 source "board/schulercontrol/sc_sps_1/Kconfig"
1175 source "board/silica/pengwyn/Kconfig"
1176 source "board/spear/spear300/Kconfig"
1177 source "board/spear/spear310/Kconfig"
1178 source "board/spear/spear320/Kconfig"
1179 source "board/spear/spear600/Kconfig"
1180 source "board/spear/x600/Kconfig"
1181 source "board/st/stv0991/Kconfig"
1182 source "board/syteco/zmx25/Kconfig"
1183 source "board/tcl/sl50/Kconfig"
1184 source "board/birdland/bav335x/Kconfig"
1185 source "board/timll/devkit3250/Kconfig"
1186 source "board/toradex/colibri_pxa270/Kconfig"
1187 source "board/technologic/ts4600/Kconfig"
1188 source "board/vscom/baltos/Kconfig"
1189 source "board/woodburn/Kconfig"
1190 source "board/work-microwave/work_92105/Kconfig"
1191 source "board/zipitz2/Kconfig"
1192
1193 source "arch/arm/Kconfig.debug"
1194
1195 endmenu