2 * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
13 #include "am4372.dtsi"
14 #include <dt-bindings/pinctrl/am43xx.h>
15 #include <dt-bindings/pwm/pwm.h>
16 #include <dt-bindings/gpio/gpio.h>
17 #include <dt-bindings/input/input.h>
20 model = "TI AM437x SK EVM";
21 compatible = "ti,am437x-sk-evm","ti,am4372","ti,am43";
32 compatible = "pwm-backlight";
33 pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
34 brightness-levels = <0 51 53 56 62 75 101 152 255>;
35 default-brightness-level = <8>;
39 compatible = "ti,da830-evm-audio";
40 ti,model = "AM437x-SK-EVM";
41 ti,audio-codec = <&tlv320aic3106>;
42 ti,mcasp-controller = <&mcasp1>;
43 ti,codec-clock-rate = <24000000>;
45 "Headphone Jack", "HPLOUT",
46 "Headphone Jack", "HPROUT";
49 matrix_keypad: matrix_keypad@0 {
50 compatible = "gpio-matrix-keypad";
52 pinctrl-names = "default";
53 pinctrl-0 = <&matrix_keypad_pins>;
55 debounce-delay-ms = <5>;
56 col-scan-delay-us = <5>;
58 row-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH /* Bank5, pin5 */
59 &gpio5 6 GPIO_ACTIVE_HIGH>; /* Bank5, pin6 */
61 col-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH /* Bank5, pin13 */
62 &gpio5 4 GPIO_ACTIVE_HIGH>; /* Bank5, pin4 */
65 MATRIX_KEY(0, 0, KEY_DOWN)
66 MATRIX_KEY(0, 1, KEY_RIGHT)
67 MATRIX_KEY(1, 0, KEY_LEFT)
68 MATRIX_KEY(1, 1, KEY_UP)
73 compatible = "gpio-leds";
75 pinctrl-names = "default";
76 pinctrl-0 = <&leds_pins>;
79 label = "am437x-sk:red:heartbeat";
80 gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 0 */
81 linux,default-trigger = "heartbeat";
82 default-state = "off";
86 label = "am437x-sk:green:mmc1";
87 gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 1 */
88 linux,default-trigger = "mmc0";
89 default-state = "off";
93 label = "am437x-sk:blue:cpu0";
94 gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 2 */
95 linux,default-trigger = "cpu0";
96 default-state = "off";
100 label = "am437x-sk:blue:usr3";
101 gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 3 */
102 default-state = "off";
107 compatible = "newhaven,nhd-4.3-480272ef-atxl", "panel-dpi";
110 pinctrl-names = "default";
111 pinctrl-0 = <&lcd_pins>;
113 enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
116 clock-frequency = <9000000>;
128 pixelclk-active = <1>;
133 remote-endpoint = <&dpi_out>;
140 matrix_keypad_pins: matrix_keypad_pins {
141 pinctrl-single,pins = <
142 0x24c (PIN_OUTPUT | MUX_MODE7) /* gpio5_13.gpio5_13 */
143 0x250 (PIN_OUTPUT | MUX_MODE7) /* spi4_sclk.gpio5_4 */
144 0x254 (PIN_INPUT | MUX_MODE7) /* spi4_d0.gpio5_5 */
145 0x258 (PIN_INPUT | MUX_MODE7) /* spi4_d1.gpio5_5 */
149 leds_pins: leds_pins {
150 pinctrl-single,pins = <
151 0x228 (PIN_OUTPUT | MUX_MODE7) /* uart3_rxd.gpio5_2 */
152 0x22c (PIN_OUTPUT | MUX_MODE7) /* uart3_txd.gpio5_3 */
153 0x230 (PIN_OUTPUT | MUX_MODE7) /* uart3_ctsn.gpio5_0 */
154 0x234 (PIN_OUTPUT | MUX_MODE7) /* uart3_rtsn.gpio5_1 */
158 i2c0_pins: i2c0_pins {
159 pinctrl-single,pins = <
160 0x188 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */
161 0x18c (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */
165 i2c1_pins: i2c1_pins {
166 pinctrl-single,pins = <
167 0x15c (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2) /* spi0_cs0.i2c1_scl */
168 0x158 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2) /* spi0_d1.i2c1_sda */
172 mmc1_pins: pinmux_mmc1_pins {
173 pinctrl-single,pins = <
174 0x0f0 (PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
175 0x0f4 (PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
176 0x0f8 (PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
177 0x0fc (PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
178 0x100 (PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
179 0x104 (PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
180 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
184 ecap0_pins: backlight_pins {
185 pinctrl-single,pins = <
186 0x164 (PIN_OUTPUT | MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out */
190 edt_ft5306_ts_pins: edt_ft5306_ts_pins {
191 pinctrl-single,pins = <
192 0x74 (PIN_INPUT | MUX_MODE7) /* gpmc_wpn.gpio0_31 */
193 0x78 (PIN_OUTPUT | MUX_MODE7) /* gpmc_be1n.gpio1_28 */
197 vpfe0_pins_default: vpfe0_pins_default {
198 pinctrl-single,pins = <
199 0x1b0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_hd mode 0*/
200 0x1b4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_vd mode 0*/
201 0x1b8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_field mode 0*/
202 0x1bc (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_wen mode 0*/
203 0x1c0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_pclk mode 0*/
204 0x1c4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data8 mode 0*/
205 0x1c8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data9 mode 0*/
206 0x208 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data0 mode 0*/
207 0x20c (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data1 mode 0*/
208 0x210 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data2 mode 0*/
209 0x214 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data3 mode 0*/
210 0x218 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data4 mode 0*/
211 0x21c (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data5 mode 0*/
212 0x220 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data6 mode 0*/
213 0x224 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data7 mode 0*/
217 vpfe0_pins_sleep: vpfe0_pins_sleep {
218 pinctrl-single,pins = <
219 0x1b0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
220 0x1b4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
221 0x1b8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
222 0x1bc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
223 0x1c0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
224 0x1c4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
225 0x1c8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
226 0x208 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
227 0x20c (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
228 0x210 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
229 0x214 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
230 0x218 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
231 0x21c (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
232 0x220 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
233 0x224 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
237 cpsw_default: cpsw_default {
238 pinctrl-single,pins = <
240 0x12c (PIN_OUTPUT | MUX_MODE2) /* mii1_txclk.rmii1_tclk */
241 0x114 (PIN_OUTPUT | MUX_MODE2) /* mii1_txen.rgmii1_tctl */
242 0x128 (PIN_OUTPUT | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */
243 0x124 (PIN_OUTPUT | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */
244 0x120 (PIN_OUTPUT | MUX_MODE2) /* mii1_txd0.rgmii1_td2 */
245 0x11c (PIN_OUTPUT | MUX_MODE2) /* mii1_txd1.rgmii1_td3 */
246 0x130 (PIN_INPUT | MUX_MODE2) /* mii1_rxclk.rmii1_rclk */
247 0x118 (PIN_INPUT | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */
248 0x140 (PIN_INPUT | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */
249 0x13c (PIN_INPUT | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */
250 0x138 (PIN_INPUT | MUX_MODE2) /* mii1_rxd0.rgmii1_rd2 */
251 0x134 (PIN_INPUT | MUX_MODE2) /* mii1_rxd1.rgmii1_rd3 */
254 0x58 (PIN_OUTPUT | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */
255 0x40 (PIN_OUTPUT | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */
256 0x54 (PIN_OUTPUT | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */
257 0x50 (PIN_OUTPUT | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */
258 0x4c (PIN_OUTPUT | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */
259 0x48 (PIN_OUTPUT | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */
260 0x5c (PIN_INPUT | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */
261 0x44 (PIN_INPUT | MUX_MODE2) /* gpmc_a1.rgmii2_rtcl */
262 0x6c (PIN_INPUT | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */
263 0x68 (PIN_INPUT | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */
264 0x64 (PIN_INPUT | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */
265 0x60 (PIN_INPUT | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */
269 cpsw_sleep: cpsw_sleep {
270 pinctrl-single,pins = <
271 /* Slave 1 reset value */
272 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
273 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
274 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
275 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
276 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
277 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
278 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
279 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
280 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
281 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
282 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
283 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
285 /* Slave 2 reset value */
286 0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7)
287 0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7)
288 0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7)
289 0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7)
290 0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7)
291 0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7)
292 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7)
293 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7)
294 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)
295 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)
296 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)
297 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7)
301 davinci_mdio_default: davinci_mdio_default {
302 pinctrl-single,pins = <
304 0x148 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
305 0x14c (PIN_OUTPUT | MUX_MODE0) /* mdio_clk.mdio_clk */
309 davinci_mdio_sleep: davinci_mdio_sleep {
310 pinctrl-single,pins = <
311 /* MDIO reset value */
312 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
313 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
318 pinctrl-single,pins = <
319 0x020 (PIN_OUTPUT | MUX_MODE1) /* gpmc ad 8 -> DSS DATA 23 */
320 0x024 (PIN_OUTPUT | MUX_MODE1)
321 0x028 (PIN_OUTPUT | MUX_MODE1)
322 0x02c (PIN_OUTPUT | MUX_MODE1)
323 0x030 (PIN_OUTPUT | MUX_MODE1)
324 0x034 (PIN_OUTPUT | MUX_MODE1)
325 0x038 (PIN_OUTPUT | MUX_MODE1)
326 0x03c (PIN_OUTPUT | MUX_MODE1) /* gpmc ad 15 -> DSS DATA 16 */
327 0x0a0 (PIN_OUTPUT | MUX_MODE0) /* DSS DATA 0 */
328 0x0a4 (PIN_OUTPUT | MUX_MODE0)
329 0x0a8 (PIN_OUTPUT | MUX_MODE0)
330 0x0ac (PIN_OUTPUT | MUX_MODE0)
331 0x0b0 (PIN_OUTPUT | MUX_MODE0)
332 0x0b4 (PIN_OUTPUT | MUX_MODE0)
333 0x0b8 (PIN_OUTPUT | MUX_MODE0)
334 0x0bc (PIN_OUTPUT | MUX_MODE0)
335 0x0c0 (PIN_OUTPUT | MUX_MODE0)
336 0x0c4 (PIN_OUTPUT | MUX_MODE0)
337 0x0c8 (PIN_OUTPUT | MUX_MODE0)
338 0x0cc (PIN_OUTPUT | MUX_MODE0)
339 0x0d0 (PIN_OUTPUT | MUX_MODE0)
340 0x0d4 (PIN_OUTPUT | MUX_MODE0)
341 0x0d8 (PIN_OUTPUT | MUX_MODE0)
342 0x0dc (PIN_OUTPUT | MUX_MODE0) /* DSS DATA 15 */
343 0x0e0 (PIN_OUTPUT | MUX_MODE0) /* DSS VSYNC */
344 0x0e4 (PIN_OUTPUT | MUX_MODE0) /* DSS HSYNC */
345 0x0e8 (PIN_OUTPUT | MUX_MODE0) /* DSS PCLK */
346 0x0ec (PIN_OUTPUT | MUX_MODE0) /* DSS AC BIAS EN */
351 qspi_pins: qspi_pins {
352 pinctrl-single,pins = <
353 0x7c (PIN_OUTPUT | MUX_MODE3) /* gpmc_csn0.qspi_csn */
354 0x88 (PIN_OUTPUT | MUX_MODE2) /* gpmc_csn3.qspi_clk */
355 0x90 (PIN_INPUT | MUX_MODE3) /* gpmc_advn_ale.qspi_d0 */
356 0x94 (PIN_INPUT | MUX_MODE3) /* gpmc_oen_ren.qspi_d1 */
357 0x98 (PIN_INPUT | MUX_MODE3) /* gpmc_wen.qspi_d2 */
358 0x9c (PIN_INPUT | MUX_MODE3) /* gpmc_be0n_cle.qspi_d3 */
362 mcasp1_pins: mcasp1_pins {
363 pinctrl-single,pins = <
364 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
365 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
366 0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
367 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
372 pinctrl-single,pins = <
373 0x1c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpcm_ad7.gpio1_7 */
377 usb1_pins: usb1_pins {
378 pinctrl-single,pins = <
379 0x2c0 (PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */
383 usb2_pins: usb2_pins {
384 pinctrl-single,pins = <
385 0x2c4 (PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */
392 pinctrl-names = "default";
393 pinctrl-0 = <&i2c0_pins>;
394 clock-frequency = <400000>;
397 compatible = "ti,tps65218";
399 interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
400 interrupt-controller;
401 #interrupt-cells = <2>;
403 dcdc1: regulator-dcdc1 {
404 compatible = "ti,tps65218-dcdc1";
405 /* VDD_CORE limits min of OPP50 and max of OPP100 */
406 regulator-name = "vdd_core";
407 regulator-min-microvolt = <912000>;
408 regulator-max-microvolt = <1144000>;
413 dcdc2: regulator-dcdc2 {
414 compatible = "ti,tps65218-dcdc2";
415 /* VDD_MPU limits min of OPP50 and max of OPP_NITRO */
416 regulator-name = "vdd_mpu";
417 regulator-min-microvolt = <912000>;
418 regulator-max-microvolt = <1378000>;
423 dcdc3: regulator-dcdc3 {
424 compatible = "ti,tps65218-dcdc3";
425 regulator-name = "vdds_ddr";
426 regulator-min-microvolt = <1500000>;
427 regulator-max-microvolt = <1500000>;
432 dcdc4: regulator-dcdc4 {
433 compatible = "ti,tps65218-dcdc4";
434 regulator-name = "v3_3d";
435 regulator-min-microvolt = <3300000>;
436 regulator-max-microvolt = <3300000>;
441 ldo1: regulator-ldo1 {
442 compatible = "ti,tps65218-ldo1";
443 regulator-name = "v1_8d";
444 regulator-min-microvolt = <1800000>;
445 regulator-max-microvolt = <1800000>;
451 compatible = "ti,tps65218-pwrbutton";
453 interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
458 compatible = "at24,24c256";
466 pinctrl-names = "default";
467 pinctrl-0 = <&i2c1_pins>;
468 clock-frequency = <400000>;
472 compatible = "edt,edt-ft5306", "edt,edt-ft5x06";
473 pinctrl-names = "default";
474 pinctrl-0 = <&edt_ft5306_ts_pins>;
477 interrupt-parent = <&gpio0>;
480 reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
482 touchscreen-size-x = <480>;
483 touchscreen-size-y = <272>;
486 tlv320aic3106: tlv320aic3106@1b {
487 compatible = "ti,tlv320aic3106";
492 AVDD-supply = <&dcdc4>;
493 IOVDD-supply = <&dcdc4>;
494 DRVDD-supply = <&dcdc4>;
495 DVDD-supply = <&ldo1>;
499 compatible = "st,lis331dlh";
503 Vdd-supply = <&dcdc4>;
504 Vdd_IO-supply = <&dcdc4>;
505 interrupts-extended = <&gpio1 6 0>, <&gpio2 1 0>;
515 pinctrl-names = "default";
516 pinctrl-0 = <&ecap0_pins>;
533 pinctrl-names = "default";
534 pinctrl-0 = <&mmc1_pins>;
536 vmmc-supply = <&dcdc4>;
538 cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
546 dr_mode = "peripheral";
548 pinctrl-names = "default";
549 pinctrl-0 = <&usb1_pins>;
559 pinctrl-names = "default";
560 pinctrl-0 = <&usb2_pins>;
565 pinctrl-names = "default";
566 pinctrl-0 = <&qspi_pins>;
568 spi-max-frequency = <48000000>;
570 compatible = "mx66l51235l","spi-flash";
571 spi-max-frequency = <48000000>;
575 spi-tx-bus-width = <1>;
576 spi-rx-bus-width = <4>;
577 #address-cells = <1>;
580 /* MTD partition table.
581 * The ROM checks the first 512KiB
582 * for a valid file to boot(XIP).
585 label = "QSPI.U_BOOT";
586 reg = <0x00000000 0x000080000>;
589 label = "QSPI.U_BOOT.backup";
590 reg = <0x00080000 0x00080000>;
593 label = "QSPI.U-BOOT-SPL_OS";
594 reg = <0x00100000 0x00010000>;
597 label = "QSPI.U_BOOT_ENV";
598 reg = <0x00110000 0x00010000>;
601 label = "QSPI.U-BOOT-ENV.backup";
602 reg = <0x00120000 0x00010000>;
605 label = "QSPI.KERNEL";
606 reg = <0x00130000 0x0800000>;
609 label = "QSPI.FILESYSTEM";
610 reg = <0x00930000 0x36D0000>;
616 pinctrl-names = "default", "sleep";
617 pinctrl-0 = <&cpsw_default>;
618 pinctrl-1 = <&cpsw_sleep>;
624 pinctrl-names = "default", "sleep";
625 pinctrl-0 = <&davinci_mdio_default>;
626 pinctrl-1 = <&davinci_mdio_sleep>;
631 phy_id = <&davinci_mdio>, <4>;
633 dual_emac_res_vlan = <1>;
637 phy_id = <&davinci_mdio>, <5>;
639 dual_emac_res_vlan = <2>;
647 pinctrl-names = "default";
648 pinctrl-0 = <&mcasp1_pins>;
665 pinctrl-names = "default";
666 pinctrl-0 = <&dss_pins>;
669 dpi_out: endpoint@0 {
670 remote-endpoint = <&lcd_in>;
685 cpu0-supply = <&dcdc2>;
690 pinctrl-names = "default", "sleep";
691 pinctrl-0 = <&vpfe0_pins_default>;
692 pinctrl-1 = <&vpfe0_pins_sleep>;
697 /* remote-endpoint = <&sensor>; add once we have it */
698 ti,am437x-vpfe-interface = <0>;