2 * at91-sama5d2_ptc_ek.dts - Device Tree file for SAMA5D2 PTC EK board
4 * Copyright (C) 2017 Microchip Technology Inc,
5 * Ludovic Desroches <ludovic.desroches@microchip.com>
7 * This file is dual-licensed: you can use it either under the terms
8 * of the GPL or the X11 license, at your option. Note that this dual
9 * licensing only applies to this file, and not this project as a
12 * a) This file is free software; you can redistribute it and/or
13 * modify it under the terms of the GNU General Public License as
14 * published by the Free Software Foundation; either version 2 of the
15 * License, or (at your option) any later version.
17 * This file is distributed in the hope that it will be useful,
18 * but WITHOUT ANY WARRANTY; without even the implied warranty of
19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 * GNU General Public License for more details.
24 * b) Permission is hereby granted, free of charge, to any person
25 * obtaining a copy of this software and associated documentation
26 * files (the "Software"), to deal in the Software without
27 * restriction, including without limitation the rights to use,
28 * copy, modify, merge, publish, distribute, sublicense, and/or
29 * sell copies of the Software, and to permit persons to whom the
30 * Software is furnished to do so, subject to the following
33 * The above copyright notice and this permission notice shall be
34 * included in all copies or substantial portions of the Software.
36 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
37 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
38 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
39 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
40 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
41 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
42 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
43 * OTHER DEALINGS IN THE SOFTWARE.
46 #include <dt-bindings/gpio/gpio.h>
47 #include "sama5d2.dtsi"
48 #include "sama5d2-pinfunc.h"
51 model = "Atmel SAMA5D2 PTC EK";
52 compatible = "atmel,sama5d2-ptc_ek", "atmel,sama5d2", "atmel,sama5";
60 usb0: gadget@00300000 {
61 atmel,vbus-gpio = <&pioA PIN_PA27 GPIO_ACTIVE_HIGH>;
62 pinctrl-names = "default";
63 pinctrl-0 = <&pinctrl_usba_vbus>;
70 &pioA PIN_PB12 GPIO_ACTIVE_HIGH
73 pinctrl-names = "default";
74 pinctrl-0 = <&pinctrl_usb_default>;
82 sdmmc0: sdio-host@a0000000 {
84 pinctrl-names = "default";
85 pinctrl-0 = <&pinctrl_sdmmc0_cmd_dat_default &pinctrl_sdmmc0_ck_cd_default>;
90 sdmmc1: sdio-host@b0000000 {
92 pinctrl-names = "default";
93 pinctrl-0 = <&pinctrl_sdmmc1_cmd_dat_default &pinctrl_sdmmc1_ck_cd_default>;
94 status = "disabled"; /* conflicts with nand and qspi0*/
99 macb0: ethernet@f8008000 {
100 pinctrl-names = "default";
101 pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>;
110 uart0: serial@f801c000 {
111 pinctrl-names = "default";
112 pinctrl-0 = <&pinctrl_uart0_default>;
118 pinctrl-names = "default";
119 pinctrl-0 = <&pinctrl_i2c1_default>;
122 i2c_eeprom: i2c_eeprom@50 {
123 compatible = "atmel,24mac402";
128 pioA: gpio@fc038000 {
130 pinctrl_i2c1_default: i2c1_default {
131 pinmux = <PIN_PC6__TWD1>,
136 pinctrl_macb0_phy_irq: macb0_phy_irq {
137 pinmux = <PIN_PB24__GPIO>;
141 pinctrl_macb0_rmii: macb0_rmii {
142 pinmux = <PIN_PB14__GTXCK>,
155 pinctrl_sdmmc0_cmd_dat_default: sdmmc0_cmd_dat_default {
156 pinmux = <PIN_PA1__SDMMC0_CMD>,
157 <PIN_PA2__SDMMC0_DAT0>,
158 <PIN_PA3__SDMMC0_DAT1>,
159 <PIN_PA4__SDMMC0_DAT2>,
160 <PIN_PA5__SDMMC0_DAT3>,
161 <PIN_PA6__SDMMC0_DAT4>,
162 <PIN_PA7__SDMMC0_DAT5>,
163 <PIN_PA8__SDMMC0_DAT6>,
164 <PIN_PA9__SDMMC0_DAT7>;
169 pinctrl_sdmmc0_ck_cd_default: sdmmc0_ck_cd_default {
170 pinmux = <PIN_PA0__SDMMC0_CK>,
171 <PIN_PA10__SDMMC0_RSTN>,
172 <PIN_PA11__SDMMC0_VDDSEL>,
173 <PIN_PA13__SDMMC0_CD>;
178 pinctrl_sdmmc1_cmd_dat_default: sdmmc1_cmd_dat_default {
179 pinmux = <PIN_PA28__SDMMC1_CMD>,
180 <PIN_PA18__SDMMC1_DAT0>,
181 <PIN_PA19__SDMMC1_DAT1>,
182 <PIN_PA20__SDMMC1_DAT2>,
183 <PIN_PA21__SDMMC1_DAT3>;
188 pinctrl_sdmmc1_ck_cd_default: sdmmc1_ck_cd_default {
189 pinmux = <PIN_PA22__SDMMC1_CK>,
190 <PIN_PA30__SDMMC1_CD>;
195 pinctrl_uart0_default: uart0_default {
196 pinmux = <PIN_PB26__URXD0>,
202 pinctrl_usb_default: usb_default {
203 pinmux = <PIN_PB12__GPIO>;
207 pinctrl_usba_vbus: usba_vbus {
208 pinmux = <PIN_PB11__GPIO>;